am62p-upstream-binman-logs.txt

U-Boot SPL 2024.07-rc4-00014-gd9c7e97caf69 (Jun 07 2024 - 13:52:33 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)')
SPL initial stack usage: 17024 bytes
Trying to boot from UART
C
- 03:29:46 [INFO] Disconnected serial from am62pxx_sk-fs
- 03:29:46 [INFO] Receiving primary bootloader image ...
- 03:31:41 [INFO] Connected to am62pxx_sk-fs via serial 
- 03:31:42 [INFO] Target: 
Loaded 1127303 bytes
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty
NOTICE:  BL31: Built : 16:09:05, Feb  9 2024

U-Boot SPL 2024.07-rc4-00014-gd9c7e97caf69 (Jun 07 2024 - 13:52:53 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)')
Trying to boot from UART
C
- 03:31:42 [INFO] Disconnected serial from am62pxx_sk-fs
- 03:31:42 [INFO] Receiving secondary bootloader image ...
- 03:34:05 [INFO] Connected to am62pxx_sk-fs via serial 
- 03:34:05 [INFO] Host: 
- 03:34:07 [INFO] Target: 
Loaded 1435071 bytes


U-Boot 2024.07-rc4-00014-gd9c7e97caf69 (Jun 07 2024 - 13:52:53 +0530)

SoC:   AM62PX SR1.0 HS-FS
Model: Texas Instruments AM62P5 SK
DRAM:  2 GiB (effective 8 GiB)
Core:  68 devices, 26 uclasses, devicetree: separate
MMC:   mmc@fa10000 - probe failed: -22
mmc@fa00000: 1
Loading Environment from nowhere... OK
In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
Net:   am65_cpsw_nuss_port ethernet@8000000port@1: phy_connect() failed
am65_cpsw_nuss_port ethernet@8000000port@2: phy_connect() failed
No ethernet found.

Hit any key to stop autoboot:  2  0 
=> 
=> 
- 03:34:07 [INFO] Disconnected serial from am62pxx_sk-fs
- 03:34:07 [INFO] Connected to am62pxx_sk-fs via serial 
- 03:34:07 [INFO] Host: version
- 03:34:07 [INFO] Target: 
version
U-Boot 2024.07-rc4-00014-gd9c7e97caf69 (Jun 07 2024 - 13:52:53 +0530)

=>