beagleplay deep sleep demo

U-Boot SPL 2023.04-00034-g04925df43802 (Jul 03 2023 - 14:26:40 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
SPL initial stack usage: 13392 bytes
Trying to boot from MMC2
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.8(release):v2.8-226-g2fcd408bb3-dirty
NOTICE:  BL31: Built : 23:16:46, Mar 14 2023

U-Boot SPL 2023.04-00034-g04925df43802 (Jul 03 2023 - 14:26:57 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
SPL initial stack usage: 1904 bytes
Error (-2): cannot determine file size
Trying to boot from MMC2


U-Boot 2023.04-00034-g04925df43802 (Jul 03 2023 - 14:26:57 +0530)

SoC:   AM62X SR1.0 GP
Model: BeagleBoard.org BeaglePlay
Board: BEAGLEPLAY-A0- rev 02
DRAM:  2 GiB
Core:  88 devices, 29 uclasses, devicetree: separate
MMC:   mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
Error: Can't set serial# to SSSS
Net:   Could not get PHY for ethernet@8000000port@1: addr 0
am65_cpsw_nuss_port ethernet@8000000port@1: phy_connect() failed
No ethernet found.

Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc1 is current device
SD/MMC found on device 1
Failed to load 'boot.scr'
574 bytes read in 9 ms (61.5 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc1 ...
## Error: "main_cpsw0_qsgmii_phyinit" not defined
20593152 bytes read in 828 ms (23.7 MiB/s)
59584 bytes read in 13 ms (4.4 MiB/s)
Working FDT set to 88000000
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
   Loading Device Tree to 000000008feee000, end 000000008fffffff ... OK
Working FDT set to 8feee000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.1.33-g5ef618b01e (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Fri Jun 30 07:15:08 UTC 2023
[    0.000000] Machine model: BeagleBoard.org BeaglePlay
[    0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[    0.000000] printk: bootconsole [ns16550a0] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB
[    0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB
[    0.000000] OF: reserved mem: initialized node r5f-dma-memory@9db00000, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x000000009cafffff]
[    0.000000]   node   0: [mem 0x000000009cb00000-0x000000009d9fffff]
[    0.000000]   node   0: [mem 0x000000009da00000-0x000000009dafffff]
[    0.000000]   node   0: [mem 0x000000009db00000-0x000000009e6fffff]
[    0.000000]   node   0: [mem 0x000000009e700000-0x000000009e77ffff]
[    0.000000]   node   0: [mem 0x000000009e780000-0x000000009fffffff]
[    0.000000]   node   0: [mem 0x00000000a0000000-0x00000000ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000] cma: Reserved 32 MiB at 0x00000000fba00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 19 pages/cpu s38376 r8192 d31256 u77824
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516096
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.ent
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1949464K/2097152K available (12480K kernel code, 1294K rwdata, 4040K rodata, 2176K init, 498K bss, 114920K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
[    0.000000] ITS [mem 0x01820000-0x0182ffff]
[    0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[    0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[    0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x0000000080040000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080050000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[    0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[    0.008548] Console: colour dummy device 80x25
[    0.013143] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[    0.023826] pid_max: default: 32768 minimum: 301
[    0.028601] LSM: Security Framework initializing
[    0.033460] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.041044] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.050869] cblist_init_generic: Setting adjustable number of callback queues.
[    0.058326] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.064626] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.071026] rcu: Hierarchical SRCU implementation.
[    0.075932] rcu:     Max phase no-delay instances is 1000.
[    0.081543] Platform MSI: msi-controller@1820000 domain created
[    0.087863] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created
[    0.097728] EFI services will not be available.
[    0.102663] smp: Bringing up secondary CPUs ...
[    0.107971] Detected VIPT I-cache on CPU1
[    0.108087] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
[    0.108106] GICv3: CPU1: using allocated LPI pending table @0x0000000080060000
[    0.108163] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.108865] Detected VIPT I-cache on CPU2
[    0.108940] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000
[    0.108955] GICv3: CPU2: using allocated LPI pending table @0x0000000080070000
[    0.108988] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.109623] Detected VIPT I-cache on CPU3
[    0.109705] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000
[    0.109720] GICv3: CPU3: using allocated LPI pending table @0x0000000080080000
[    0.109749] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.109820] smp: Brought up 1 node, 4 CPUs
[    0.189552] SMP: Total of 4 processors activated.
[    0.194365] CPU features: detected: 32-bit EL0 Support
[    0.199638] CPU features: detected: CRC32 instructions
[    0.204959] CPU: All CPU(s) started at EL2
[    0.209156] alternatives: applying system-wide alternatives
[    0.216718] devtmpfs: initialized
[    0.228308] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.238311] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.246532] pinctrl core: initialized pinctrl subsystem
[    0.252547] DMI not present or invalid.
[    0.257113] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.264377] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.271920] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.280033] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.288219] audit: initializing netlink subsys (disabled)
[    0.293918] audit: type=2000 audit(0.188:1): state=initialized audit_enabled=0 res=1
[    0.294402] thermal_sys: Registered thermal governor 'step_wise'
[    0.301851] thermal_sys: Registered thermal governor 'power_allocator'
[    0.308037] cpuidle: using governor menu
[    0.318908] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.325937] ASID allocator initialised with 65536 entries
[    0.342918] platform 30200000.dss: Fixed dependency cycle(s) with /bus@f0000/i2c@20020000/hdmitx@4c
[    0.354719] platform connector: Fixed dependency cycle(s) with /bus@f0000/i2c@20020000/hdmitx@4c
[    0.364512] KASLR disabled due to lack of seed
[    0.376133] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.383109] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.389520] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.396459] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.402867] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.409806] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.416214] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.423153] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.431345] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected
[    0.440995] iommu: Default domain type: Translated
[    0.446053] iommu: DMA domain TLB invalidation policy: strict mode
[    0.452741] SCSI subsystem initialized
[    0.456965] usbcore: registered new interface driver usbfs
[    0.462619] usbcore: registered new interface driver hub
[    0.468101] usbcore: registered new device driver usb
[    0.473834] pps_core: LinuxPPS API ver. 1 registered
[    0.478917] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.488275] PTP clock support registered
[    0.492407] EDAC MC: Ver: 3.0.0
[    0.496516] omap-mailbox 29000000.mailbox: omap mailbox rev 0x66fc9100
[    0.503636] FPGA manager framework
[    0.507219] Advanced Linux Sound Architecture Driver Initialized.
[    0.514419] clocksource: Switched to clocksource arch_sys_counter
[    0.520922] VFS: Disk quotas dquot_6.6.0
[    0.524975] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.537948] NET: Registered PF_INET protocol family
[    0.543249] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.552483] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.561294] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.569230] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.577433] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.585425] TCP: Hash tables configured (established 16384 bind 16384)
[    0.592336] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.599267] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.606809] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.613076] RPC: Registered named UNIX socket transport module.
[    0.619155] RPC: Registered udp transport module.
[    0.623965] RPC: Registered tcp transport module.
[    0.628773] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.635365] NET: Registered PF_XDP protocol family
[    0.640278] PCI: CLS 0 bytes, default 64
[    0.645079] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.655147] Initialise system trusted keyrings
[    0.659973] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.672192] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.678877] NFS: Registering the id_resolver key type
[    0.684092] Key type id_resolver registered
[    0.688374] Key type id_legacy registered
[    0.692537] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.699393] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.707167] 9p: Installing v9fs 9p2000 file system support
[    0.747505] Key type asymmetric registered
[    0.751696] Asymmetric key parser 'x509' registered
[    0.756752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.764489] io scheduler mq-deadline registered
[    0.769130] io scheduler kyber registered
[    0.776350] pinctrl-single 4084000.pinctrl: 34 pins, size 136
[    0.782916] pinctrl-single f4000.pinctrl: 171 pins, size 684
[    0.796283] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.811191] loop: module loaded
[    0.815718] megasas: 07.719.03.00-rc1
[    0.823605] tun: Universal TUN/TAP device driver, 1.6
[    0.829504] thunder_xcv, ver 1.0
[    0.832857] thunder_bgx, ver 1.0
[    0.836190] nicpf, ver 1.0
[    0.839355] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    0.846743] hns3: Copyright (c) 2017 Huawei Corporation.
[    0.852264] hclge is initializing
[    0.855673] e1000: Intel(R) PRO/1000 Network Driver
[    0.860659] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.866570] e1000e: Intel(R) PRO/1000 Network Driver
[    0.871645] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.877729] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.883249] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.888972] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[    0.895379] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    0.901558] sky2: driver version 1.30
[    0.906010] VFIO - User Level meta-driver version: 0.3
[    0.912068] usbcore: registered new interface driver usb-storage
[    0.918986] i2c_dev: i2c /dev entries driver
[    0.925442] sdhci: Secure Digital Host Controller Interface driver
[    0.931830] sdhci: Copyright(c) Pierre Ossman
[    0.936775] Synopsys Designware Multimedia Card Interface Driver
[    0.943367] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.950128] ledtrig-cpu: registered to indicate activity on CPUs
[    0.956480] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    0.963447] usbcore: registered new interface driver usbhid
[    0.969152] usbhid: USB HID core driver
[    0.974381] optee: probing for conduit method.
[    0.978985] optee: revision 3.20 (8e74d476)
[    0.979308] optee: dynamic shared memory is enabled
[    0.988836] optee: initialized driver
[    0.994345] Initializing XFRM netlink socket
[    0.998781] NET: Registered PF_PACKET protocol family
[    1.004094] 9pnet: Installing 9P2000 support
[    1.008534] Key type dns_resolver registered
[    1.013340] registered taskstats version 1
[    1.017570] Loading compiled-in X.509 certificates
[    1.031368] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
[    1.096240] omap_i2c 4900000.i2c: bus 5 rev0.12 at 100 kHz
[    1.127921] VDD_CORE: Bringing 750000uV into 850000-850000uV
[    1.140166] omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz
[    1.147310] omap_i2c 20010000.i2c: bus 1 rev0.12 at 100 kHz
[    1.154474] omap_i2c 20020000.i2c: bus 2 rev0.12 at 100 kHz
[    1.161460] omap_i2c 20030000.i2c: bus 3 rev0.12 at 400 kHz
[    1.167443] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created
[    1.175808] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created
[    1.185044] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created
[    1.195001] ti-udma 485c0100.dma-controller: Number of rings: 82
[    1.203203] ti-udma 485c0100.dma-controller: Channels: 48 (bchan: 18, tchan: 12, rchan: 18)
[    1.214214] ti-udma 485c0000.dma-controller: Number of rings: 150
[    1.224301] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15)
[    1.234507] printk: console [ttyS2] disabled
[    1.238956] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 291, base_baud = 3000000) is a 8250
[    1.247854] printk: console [ttyS2] enabled
[    1.247854] printk: console [ttyS2] enabled
[    1.256315] printk: bootconsole [ns16550a0] disabled
[    1.256315] printk: bootconsole [ns16550a0] disabled
[    1.267542] 2850000.serial: ttyS0 at MMIO 0x2850000 (irq = 292, base_baud = 3000000) is a 8250
[    1.277201] 2860000.serial: ttyS1 at MMIO 0x2860000 (irq = 293, base_baud = 3000000) is a 8250
[    1.287030] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006
[    1.300037] am65-cpsw-nuss 8000000.ethernet: Use random MAC address
[    1.306319] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5
[    1.313447] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512
[    1.320098] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0
[    1.330560] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19
[    1.341970] mmc0: CQHCI version 5.10
[    1.383008] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit
[    1.455850] mmc0: Command Queue Engine enabled
[    1.460342] mmc0: new HS200 MMC card at address 0001
[    1.466210] mmcblk0: mmc0:0001 TB2916 14.6 GiB
[    1.472632]  mmcblk0: p1 p2
[    1.476149] mmcblk0boot0: mmc0:0001 TB2916 4.00 MiB
[    1.482185] mmcblk0boot1: mmc0:0001 TB2916 4.00 MiB
[    1.488152] sdhci-am654 fa00000.mmc: Got CD GPIO
[    1.488365] mmcblk0rpmb: mmc0:0001 TB2916 4.00 MiB, chardev (240:0)
[    1.488969] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present!
[    1.490138] mmc2: CQHCI version 5.10
[    1.491678] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    1.503478] ALSA device list:
[    1.510301] mmc1: CQHCI version 5.10
[    1.516671]   No soundcards found.
[    1.529265] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit
[    1.542339] sdhci-am654 fa20000.mmc: card claims to support voltages below defined range
[    1.560050] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
[    1.567744] Waiting for root device PARTUUID=7c6dccdc-02...
[    1.575882] mmc2: new high speed SDIO card at address 0001
[    1.632699] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[    1.640056] mmcblk1: mmc1:aaaa SD32G 29.7 GiB
[    1.646696]  mmcblk1: p1 p2
[    1.660009] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none.
[    1.668733] VFS: Mounted root (ext4 filesystem) on device 179:98.
[    1.675652] devtmpfs: mounted
[    1.680035] Freeing unused kernel memory: 2176K
[    1.684668] Run /sbin/init as init process
[    1.830021] systemd[1]: System time before build time, advancing clock.
[    1.875089] NET: Registered PF_INET6 protocol family
[    1.881480] Segment Routing with IPv6
[    1.885215] In-situ OAM (IOAM) with IPv6
[    1.926794] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -I)
[    1.958648] systemd[1]: Detected architecture arm64.

Welcome to Arago 2023.04!

[    2.032003] systemd[1]: Hostname set to <am62xx-evm>.
[    2.042436] systemd[1]: Initializing machine ID from random generator.
[    2.167830] systemd-sysv-generator[159]: SysV service '/etc/init.d/dropbear' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package.
[    2.193404] systemd-sysv-generator[159]: SysV service '/etc/init.d/inetd.busybox' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update pa.
[    2.218227] systemd-sysv-generator[159]: SysV service '/etc/init.d/psplash.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update packa.
[    2.245011] systemd-sysv-generator[159]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package .
[    2.269275] systemd-sysv-generator[159]: SysV service '/etc/init.d/docker.init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update pack.
[    2.297593] systemd-sysv-generator[159]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please updat.
[    2.322890] systemd-sysv-generator[159]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update.
[    2.348938] systemd-sysv-generator[159]: SysV service '/etc/init.d/netperf' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package .
[    2.373091] systemd-sysv-generator[159]: SysV service '/etc/init.d/telnetd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package .
[    2.679907] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider remo.
[    2.741692] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider r.
[    2.820430] systemd[1]: Queued start job for default target Graphical Interface.
[    2.888599] systemd[1]: Created slice Slice /system/getty.
[  OK  ] Created slice Slice /system/getty.
[    2.913673] systemd[1]: Created slice Slice /system/modprobe.
[  OK  ] Created slice Slice /system/modprobe.
[    2.938084] systemd[1]: Created slice Slice /system/serial-getty.
[  OK  ] Created slice Slice /system/serial-getty.
[    2.961783] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    2.990574] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password ts to Console Directory Watch.
[    3.015048] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Ruests to Wall Directory Watch.
[    3.039148] systemd[1]: Reached target Path Units.
[  OK  ] Reached target Path Units.
[    3.054799] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    3.074707] systemd[1]: Reached target Slice Units.
[  OK  ] Reached target Slice Units.
[    3.090876] systemd[1]: Reached target Swaps.
[  OK  ] Reached target Swaps.
[    3.166920] systemd[1]: Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
[    3.191044] systemd[1]: Reached target RPC Port Mapper.
[  OK  ] Reached target
                          OK  ] Found device /dev/ttyS2.
[    5.269245] at24 0-0050: supply vcc not found, using dummy regulator
[    5.279826] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
[    5.318874] bq32k 0-0068: Oscillator Failure. Check RTC battery.
[    5.338182] ti-udma 485c0000.dma-controller: PSI-L pairing failed: 0x7506 -> 0x9016
[    5.343949] bq32k 0-0068: registered as rtc0
[    5.346692] ti-udma 485c0000.dma-controller: get channel fail in udma_of_xlate.
[    5.357819] saul-crypto 40900000.crypto: error -EINVAL: Unable to request rx1 DMA channel
[    5.366300] saul-crypto: probe of 40900000.crypto failed with error -22
[    5.367663] bq32k 0-0068: hctosys: unable to read the hardware clock
[    5.393750] input: tps65219-pwrbutton as /devices/platform/bus@f0000/20000000.i2c/i2c-0/0-0030/tps65219-pwrbutton.2.auto/input/input1
[    5.524782] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000
[    5.533578] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode
[    5.560440] rtc-ti-k3 2b1f0000.rtc: registered as rtc1
[    5.641662] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device
[    5.654661] remoteproc remoteproc0: 5000000.m4fss is available
[    5.666441] remoteproc remoteproc0: powering up 5000000.m4fss
[    5.672272] remoteproc remoteproc0: Booting fw image am62-mcu-m4f0_0-fw, size 54860
[    5.690090] rproc-virtio rproc-virtio.5.auto: assigned reserved memory node m4f-dma-memory@9cb00000
[    5.702738] rproc-virtio rproc-virtio.5.auto: registered virtio0 (type 7)
[    5.709648] remoteproc remoteproc0: remote processor 5000000.m4fss is now up
[    5.772446] PVR_K:  218: Device: fd00000.gpu
[    5.778657] PVR_K:  218: Read BVNC 33.15.11.3 from HW device registers
[    5.787347] PVR_K:  218: RGX Device registered with BVNC 33.15.11.3
[    5.853480] it66121 2-004c: IT66121 revision 1 probed
[    5.860426] [drm] Initialized pvr 23.1.6404501 20170530 for fd00000.gpu on minor 0
[    5.947045] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 1
[    5.959460] tidss 30200000.dss: [drm] Cannot find any crtc or sizes
[    6.010518] random: crng init done
[  OK  ] Finished Load/Save Random Seed.
[    6.354745] remoteproc remoteproc1: 30074000.pru is available
[    6.361907] remoteproc remoteproc2: 30078000.pru is available
[    6.430785] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.447957] virtio_rpmsg_bus virtio0: rpmsg host is online
[    6.448562] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd
[    6.462801] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe
[    6.481661] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.575191] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    6.581620] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 1
[    6.589684] xhci-hcd xhci-hcd.7.auto: USB3 root hub has no ports
[    6.595823] xhci-hcd xhci-hcd.7.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010
[    6.605543] xhci-hcd xhci-hcd.7.auto: irq 493, io mem 0x31100000
[  OK  ] Reached target Hardware activated USB gadget.
[  OK  ] Listening on Load/Save RF itch Status /dev/rfkill Watch.
[    6.633212] hub 1-0:1.0: USB hub found
[    6.639497] hub 1-0:1.0: 1 port detected
[    6.700156] wl18xx_driver wl18xx.4.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[  OK  ] Created slice Slice /system/systemd-fsck.
[    7.055280] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[    7.066544] wlcore: loaded
[  OK  ] Found device /dev/mmcblk0p2.
         Starting File System Check on /dev/mmcblk0p2...
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Found device /dev/mmcblk0p1.
         Starting File System Check on /dev/mmcblk0p1...
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Found device /dev/disk/by-uuid/3261-1A43.
[  OK  ] Finished File System Check on /dev/mmcblk0p2.
         Mounting /boot...
         Mounting /run/media/rootfs-mmcblk0p2...
[    7.336912] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[  OK  ] Finished File System Check on /dev/mmcblk0p1.
[  OK  ] Mounted /boot.
[  OK  ] Mounted /run/media/rootfs-mmcblk0p2.
         Mounting /run/media/FIRMWARE-mmcblk0p1...
[  OK  ] Mounted /run/media/FIRMWARE-mmcblk0p1.
[  OK  ] Reached target Local File Systems.
         Starting Rebuild Dynamic Linker Cache...
         Starting Create Volatile Files and Directories...
[  OK  ] Finished Create Volatile Files and Directories.
         Starting Rebuild Journal Catalog...
         Starting Network Time Synchronization...
         Starting Record System Boot/Shutdown in UTMP...
[  OK  ] Finished Record System Boot/Shutdown in UTMP.
[  OK  ] Finished Rebuild Journal Catalog.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Set.
[  OK  ] Finished Rebuild Dynamic Linker Cache.
         Starting Run pending postinsts...
         Starting Update is Completed...
[  OK  ] Finished Update is Completed.
[  OK  ] Finished Run pending postinsts.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timer Units.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
         Starting Docker Socket for the API...
[  OK  ] Listening on dropbear.socket.
         Starting Weston socket...
         Starting D-Bus System Message Bus...
         Starting Reboot and dump vmcore via kexec...
[  OK  ] Listening on Docker Socket for the API.
[  OK  ] Listening on Weston socket.
[  OK  ] Finished Reboot and dump vmcore via kexec.
[  OK  ] Reached target Socket Units.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Reached target Basic System.
[  OK  ] Started Job spooling tools.
[  OK  ] Started Periodic Command Scheduler.
         Starting Print notice about GPLv3 packages...
         Starting IPv6 Packet Filtering Framework...
         Starting IPv4 Packet Filtering Framework...
[  OK  ] Started irqbalance daemon.
[   10.399265] audit: type=1334 audit(1651167753.568:4): prog-id=7 op=LOAD
[   10.406241] audit: type=1334 audit(1651167753.572:5): prog-id=8 op=LOAD
         Starting User Login Management...
[  OK  ] Started TEE Supplicant.
         Starting telnetd.service...
[  OK  ] Finished IPv6 Packet Filtering Framework.
[  OK  ] Finished IPv4 Packet Filtering Framework.
[  OK  ] Reached target Preparation for Network.
         Starting Network Configuration...
[  OK  ] Started telnetd.service.
[  OK  ] Started User Login Management.
[  OK  ] Started Network Configuration.
         Starting Wait for Network to be Configured...
         Starting Network Name Resolution...
[   11.125070] wlcore: using inverted interrupt logic: 2
[   11.181828] wlcore: PHY firmware version: Rev 8.2.0.0.245
[   11.272938] wlcore: firmware booted (Rev 8.9.0.0.86)
[   11.360116] am65-cpsw-nuss 8000000.ethernet eth1: PHY [gpio-0:01] driver [TI DP83TD510E] (irq=POLL)
[   11.369277] am65-cpsw-nuss 8000000.ethernet eth1: configuring for phy/rmii link mode
[  OK  ] Started Network Name Resolution.
[  OK  ] Reached target Network.
[  OK  ] Reached target Host and Network Name Lookups.
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Enable and configure wl18xx bluetooth stack...
         Starting containerd container runtime...
[  OK  ] Started Netperf Benchmark Server.
[  OK  ] Started NFS status monitor for NFSv2/3 locking..
         Starting Permit User Sessions...
[   11.475188] am65-cpsw-nuss 8000000.ethernet eth0: PHY [gpio-0:00] driver [RTL8211F-VD Gigabit Ethernet] (irq=POLL)
[  OK  ] Finished Enable and configure wl18x[   11.491207] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
x bluetooth stack.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Finished Permit User Sessions.
[  OK  ] Started Getty on tty1.
[  OK  ] Started Serial Getty on ttyS2.
[  OK  ] Reached target Login Prompts.
         Starting Synchronize System and HW clocks...
         Starting Weston, a Waylandositor, as a system service...
[   11.726531] audit: type=1334 audit(1651167754.892:6): prog-id=9 op=LOAD
[   11.733345] audit: type=1334 audit(1651167754.900:7): prog-id=10 op=LOAD
         Starting User Database Manager...
[  OK  ] Finished Synchronize System and HW clocks.
[  OK  ] Started User Database Manager.
[  OK  ] Created slice User Slice of UID 1000.
         Starting User Runtime Directory /run/user/1000...
[  OK  ] Finished User Runtime Directory /run/user/1000.
         Starting User Manager for UID 1000...
[   12.107368] audit: type=1006 audit(1651167755.276:8): pid=663 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[   12.120259] audit: type=1300 audit(1651167755.276:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffec596a48 a2=4 a3=ffff9a966020 items=0 ppid=1 pid=663 auid=1000 uid=0 gid=0 eui)
[   12.146913] audit: type=1327 audit(1651167755.276:8): proctitle="(systemd)"
[  OK  ] Finished Print notice about GPLv3 packages.
[  OK  ] Started User Manager for UID 1000.
[  OK  ] Started Session c1 of User weston.
[   12.722333] audit: type=1006 audit(1651167755.888:9): pid=652 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1
[   12.735352] audit: type=1300 audit(1651167755.888:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffec596a48 a2=4 a3=ffff9a966020 items=0 ppid=1 pid=652 auid=1000 uid=0 gid=0 eui)
[   12.761703] audit: type=1327 audit(1651167755.888:9): proctitle="(weston)"
[  OK  ] Started containerd container runtime.
[   12.989914] PVR_K:  652: RGX Firmware image 'rgx.fw.33.15.11.3' loaded
[   13.004081] PVR_K:  652: Shader binary image 'rgx.sh.33.15.11.3' loaded
[  OK  ] Started Weston, a Wayland mpositor, as a system service.
[   16.797547] platform sound: deferred probe pending

 _____                    _____           _         _
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|
              |___|                    |___|

Arago Project am62xx-evm -

Arago 2023.04 am62xx-evm -

am62xx-evm login: root
root@am62xx-evm:~# uname -a
Linux am62xx-evm 6.1.33-g5ef618b01e #1 SMP PREEMPT Fri Jun 30 07:15:08 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux
root@am62xx-evm:~# rtcwake -s 30 -m mem -d rtc1
rtcwake: wakeup from "mem" using rtc1 at Thu Jan  1 00:02:49 1970
[  133.229730] PM: suspend entry (deep)
[  133.234049] Filesystems sync: 0.000 seconds
[  133.262611] remoteproc remoteproc0: stopped remote processor 5000000.m4fss
[  133.269975] Freezing user space processes
[  133.275983] Freezing user space processes completed (elapsed 0.001 seconds)
[  133.283039] OOM killer disabled.
[  133.286258] Freezing remaining freezable tasks
[  133.292195] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[  133.299714] printk: Suspending console(s) (use no_console_suspend to debug)
[  133.307918] wlcore: down
[  133.325525] omap8250 2860000.serial: PM domain pd:158 will not be powered off
[  133.331178] Disabling non-boot CPUs ...
[  133.333381] psci: CPU1 killed (polled 0 ms)
[  133.336312] psci: CPU2 killed (polled 0 ms)
[  133.339086] psci: CPU3 killed (polled 4 ms)
[  133.340054] Enabling non-boot CPUs ...
[  133.340447] Detected VIPT I-cache on CPU1
[  133.340539] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
[  133.340603] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[  133.341572] CPU1 is up
[  133.341827] Detected VIPT I-cache on CPU2
[  133.341871] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000
[  133.341912] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[  133.342646] CPU2 is up
[  133.342918] Detected VIPT I-cache on CPU3
[  133.342967] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000
[  133.343017] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[  133.343802] CPU3 is up
[  133.344394] ti-sci 44043000.system-controller: ti_sci_resume: wakeup source: 0x50
[  133.351058] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19
[  133.998991] RTL8211F-VD Gigabit Ethernet gpio-0:00: phy_poll_reset failed: -110
[  134.000684] am65-cpsw-nuss 8000000.ethernet eth0: failed to start: -110
[  134.000701] am65-cpsw-nuss 8000000.ethernet: PM: dpm_run_callback(): am65_cpsw_nuss_resume+0x0/0x150 returns -110
[  134.000729] am65-cpsw-nuss 8000000.ethernet: PM: failed to resume: error -110
[  134.353521] wlcore: using inverted interrupt logic: 2
[  134.404140] wlcore: PHY firmware version: Rev 8.2.0.0.245
[  134.492857] wlcore: firmware booted (Rev 8.9.0.0.86)
[  134.650674] OOM killer enabled.
[  134.653810] Restarting tasks ... done.
[  134.661154] random: crng reseeded on system resumption
[  134.666398] remoteproc remoteproc0: powering up 5000000.m4fss
[  134.672172] remoteproc remoteproc0: Booting fw image am62-mcu-m4f0_0-fw, size 54860
[  134.681214] rproc-virtio rproc-virtio.5.auto: assigned reserved memory node m4f-dma-memory@9cb00000
[  134.691472] virtio_rpmsg_bus virtio0: rpmsg host is online
[  134.692483] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd
[  134.697173] rproc-virtio rproc-virtio.5.auto: registered virtio0 (type 7)
[  134.705895] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe
[  134.711484] remoteproc remoteproc0: remote processor 5000000.m4fss is now up
[  134.725749] PM: suspend exit