Created
February 10, 2017 10:41
-
-
Save DieterReuter/90ac54defe8c7801b727dfacda28506e to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0; | |
| TE: 158550 | |
| BL2 Built : 19:58:22, Aug 31 2016. | |
| gxl g54c8aee - xiaobo.gu@droid05 | |
| set vdd cpu_a to 1120 mv | |
| set vdd cpu_b to 1050 mv | |
| set vddee to 1000 mv | |
| Board ID = 6 | |
| CPU clk: 1200MHz | |
| DQS-corr enabled | |
| DDR scramble enabled | |
| DDR3 chl: Rank0+1 @ 912MHz - PASS | |
| Rank0: 1024MB(auto)-2T-13 | |
| Rank1: 1024MB(auto)-2T-13 | |
| DataBus test pass! | |
| AddrBus test pass! | |
| -s | |
| Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000 | |
| New fip structure! | |
| Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600 | |
| Load bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00015400 | |
| Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x000a9a00 | |
| NOTICE: BL3-1: v1.0(debug):2e39a99 | |
| NOTICE: BL3-1: Built : 16:36:21, Sep 20 2016 | |
| aml log : bl31 normal boot ! | |
| [Image: gxl_v1.1.3154-065f772 2016-09-29 14:08:54 yan.wang@droid05] | |
| OPS=0x82 | |
| fc c2 9 21 fb ca c 14 7e b4 40 63 [0.402997 Inits done] | |
| secure task start! | |
| high task start! | |
| low task start! | |
| INFO: BL3-1: Initializing runtime services | |
| WARNING: No OPTEE provided by BL2 boot loader | |
| ERROR: Error initializing runtime service opteed_fast | |
| INFO: BL3-1: Preparing for EL3 exit to normal world | |
| INFO: BL3-1: Next image address = 0x1000000 | |
| INFO: BL3-1: Next image spsr = 0x3c9 | |
| U-Boot 2015.01-gd267f87 (Nov 17 2016 - 19:17:36) | |
| DRAM: 2 GiB | |
| Relocation Offset is: 76ec9000 | |
| register usb cfg[0][1] = 0000000077f5f5d8 | |
| vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters | |
| vpu: clk_level = 7 | |
| vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300) | |
| vpp: vpp_init | |
| boot_device_flag : 1 | |
| Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc. | |
| init bus_cycle=6, bus_timing=7, system=5.0ns | |
| reset failed | |
| get_chip_type and ret:fffffffe | |
| get_chip_type and ret:fffffffe | |
| chip detect failed and ret:fffffffe | |
| nandphy_init failed and ret=0xfffffff1 | |
| MMC: aml_priv->desc_buf = 0x0000000073ec96b0 | |
| aml_priv->desc_buf = 0x0000000073ecb9d0 | |
| SDIO Port B: 0, SDIO Port C: 1 | |
| emmc/sd response timeout, cmd8, status=0x3ff2800 | |
| emmc/sd response timeout, cmd55, status=0x3ff2800 | |
| [mmc_init] mmc init success | |
| mmc read lba=0x14000, blocks=0x400 | |
| Amlogic multi-dtb tool | |
| Multi dtb detected | |
| Multi dtb tool version: v2 . | |
| Support 2 dtbs. | |
| aml_dt soc: gxm platform: q201 variant: 2g | |
| dtb 0 soc: gxm plat: q201 vari: 1g | |
| dtb 1 soc: gxm plat: q201 vari: 2g | |
| Find match dtb: 1 | |
| start dts,buffer=0000000073ece270,dt_addr=0000000073ed9270 | |
| parts: 11 | |
| 00: logo 0000000002000000 1 | |
| 01: recovery 0000000002000000 1 | |
| 02: rsv 0000000000800000 1 | |
| 03: tee 0000000000800000 1 | |
| 04: crypt 0000000002000000 1 | |
| 05: misc 0000000002000000 1 | |
| 06: instaboot 0000000020000000 1 | |
| 07: boot 0000000002000000 1 | |
| 08: system 0000000080000000 1 | |
| 09: cache 0000000020000000 2 | |
| 10: data ffffffffffffffff 4 | |
| get_dtb_struct: Get emmc dtb OK! | |
| overide_emmc_partition_table: overide cache | |
| [mmc_get_partition_table] skip partition cache. | |
| Partition table get from SPL is : | |
| name offset size flag | |
| =================================================================================== | |
| 0: bootloader 0 400000 0 | |
| 1: reserved 2400000 4000000 0 | |
| 2: cache 6c00000 20000000 2 | |
| 3: env 27400000 800000 0 | |
| 4: logo 28400000 2000000 1 | |
| 5: recovery 2ac00000 2000000 1 | |
| 6: rsv 2d400000 800000 1 | |
| 7: tee 2e400000 800000 1 | |
| 8: crypt 2f400000 2000000 1 | |
| 9: misc 31c00000 2000000 1 | |
| 10: instaboot 34400000 20000000 1 | |
| 11: boot 54c00000 2000000 1 | |
| 12: system 57400000 80000000 1 | |
| 13: data d7c00000 2c5400000 4 | |
| mmc read lba=0x12000, blocks=0x2 | |
| mmc read lba=0x12002, blocks=0x2 | |
| mmc_read_partition_tbl: mmc read partition OK! | |
| eMMC/TSD partition table have been checked OK! | |
| mmc env offset: 0x27400000 | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| reboot_mode=cold_boot | |
| hpd_state=0 | |
| cvbs performance type = 6, table = 0 | |
| [store]To run cmd[emmc dtb_read 0x1000000 0x40000] | |
| read emmc dtb | |
| Amlogic multi-dtb tool | |
| Multi dtb detected | |
| Multi dtb tool version: v2 . | |
| Support 2 dtbs. | |
| aml_dt soc: gxm platform: q201 variant: 2g | |
| dtb 0 soc: gxm plat: q201 vari: 1g | |
| dtb 1 soc: gxm plat: q201 vari: 2g | |
| Find match dtb: 1 | |
| Net: dwmac.c9410000 | |
| wipe_data=successful | |
| wipe_cache=successful | |
| upgrade_step=2 | |
| [OSD]load fb addr from dts | |
| [OSD]fb_addr for logo: 0x3d851000 | |
| [OSD]load fb addr from dts | |
| [OSD]fb_addr for logo: 0x3d851000 | |
| [CANVAS]canvas init | |
| [CANVAS]addr=0x3d851000 width=5760, height=2160 | |
| amlkey_init() enter! | |
| [EFUSE_MSG]keynum is 4 | |
| [BL31]: tee size: 0 | |
| [KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet | |
| [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet | |
| get_cpu_id flag_12bit=1 | |
| SARADC open channel(0). | |
| SARADC channel(0) is 0x3cc, Out of range(0x0~0x50)! | |
| saradc - saradc sub-system | |
| Usage: | |
| saradc saradc open <channel> - open a SARADC channel | |
| saradc close - close the SARADC | |
| saradc getval - get the value in current channel | |
| saradc get_in_range <min> <max> - return 0 if current value in the range of current channel | |
| get_cpu_id flag_12bit=1 | |
| InUsbBurn | |
| noSof | |
| Hit Enter or space or Ctrl+C key to stop autoboot -- : 0 | |
| (Re)start USB... | |
| USB0: USB3.0 XHCI init start | |
| Register 3000140 NbrPorts 3 | |
| Starting the controller | |
| USB XHCI 1.00 | |
| scanning bus 0 for devices... 1 USB Device(s) found | |
| scanning usb for storage devices... 0 Storage Device(s) found | |
| ** Bad device usb 0 ** | |
| card in | |
| [mmc_init] mmc init success | |
| Device: SDIO Port B | |
| Manufacturer ID: 3 | |
| OEM: 5344 | |
| Name: SL08G | |
| Tran Speed: 50000000 | |
| Rd Block Len: 512 | |
| SD version 3.0 | |
| High Capacity: Yes | |
| Capacity: 7.4 GiB | |
| mmc clock: 40000000 | |
| Bus Width: 4-bit | |
| reading s905_autoscript | |
| 871 bytes read in 11 ms (77.1 KiB/s) | |
| ## Executing script at 01020000 | |
| ** Bad device usb 0 ** | |
| reading uInitrd | |
| 3930724 bytes read in 217 ms (17.3 MiB/s) | |
| reading zImage | |
| 16367544 bytes read in 897 ms (17.4 MiB/s) | |
| reading dtb.img | |
| ** Unable to read file dtb.img ** | |
| [store]To run cmd[emmc dtb_read 0x1000000 0x40000] | |
| read emmc dtb | |
| Amlogic multi-dtb tool | |
| Multi dtb detected | |
| Multi dtb tool version: v2 . | |
| Support 2 dtbs. | |
| aml_dt soc: gxm platform: q201 variant: 2g | |
| dtb 0 soc: gxm plat: q201 vari: 1g | |
| dtb 1 soc: gxm plat: q201 vari: 2g | |
| Find match dtb: 1 | |
| ## Loading init Ramdisk from Legacy Image at 13000000 ... | |
| Image Name: uInitrd | |
| Image Type: AArch64 Linux RAMDisk Image (gzip compressed) | |
| Data Size: 3930660 Bytes = 3.7 MiB | |
| Load Address: 00000000 | |
| Entry Point: 00000000 | |
| Verifying Checksum ... OK | |
| Amlogic multi-dtb tool | |
| Single dtb detected | |
| load dtb from 0x1000000 ...... | |
| ## Flattened Device Tree blob at 01000000 | |
| Booting using the fdt blob at 0x1000000 | |
| Loading Ramdisk to 73af7000, end 73eb6a24 ... OK | |
| Loading Device Tree to 000000001fff2000, end 000000001ffff1ca ... OK | |
| signature: | |
| fdt_instaboot: no instaboot image | |
| Starting kernel ... | |
| uboot time: 4928103 us | |
| domain-0 init dvfs: 4 | |
| domain-1 init dvfs: 4 | |
| [ 0.000000@0] Initializing cgroup subsys cpu | |
| [ 0.000000@0] Initializing cgroup subsys cpuacct | |
| [ 0.000000@0] Linux version 3.14.29-amlogics905x-gac75c6f-dirty (root@user-VirtualBox) (gcc version 4.9.4 20151028 (prerelease) (Linaro GCC 4.9-2016.02) ) #24 SMP PREEMPT Wed Feb 1 12:00:18 MSK 2017 | |
| [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4 | |
| [ 0.000000@0] no prop version_code | |
| [ 0.000000@0] fdt Reserved memory table: | |
| [ 0.000000@0] linux,di: 0x000000007d300000 - 0x000000007f100000 (30 MiB) | |
| [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007d300000, size 30 MiB | |
| [ 0.000000@0] linux,ion-dev: 0x0000000079300000 - 0x000000007d300000 (64 MiB) | |
| [ 0.000000@0] linux,ppmgr: 0x0000000079300000 - 0x0000000079300000 (0 MiB) | |
| [ 0.000000@0] linux,codec_mm_cma: 0x0000000067800000 - 0x0000000073800000 (192 MiB) | |
| [ 0.000000@0] linux,picdec: 0x0000000079300000 - 0x0000000079300000 (0 MiB) | |
| [ 0.000000@0] Reserved memory: incorrect alignment of CMA region | |
| [ 0.000000@0] linux,codec_mm_reserved: 0x0000000075200000 - 0x0000000079300000 (65 MiB) | |
| [ 0.000000@0] fdt Reserved memory total: 354 MiB | |
| [ 0.000000@0] cma: Reserved 8 MiB at 74800000 | |
| [ 0.000000@0] psci: probing function IDs from device-tree | |
| [ 0.000000@0] PERCPU: Embedded 13 pages/cpu @ffffffc075166000 s20864 r8192 d24192 u53248 | |
| [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510280 | |
| [ 0.000000@0] Kernel command line: root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyS0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.repair=yes net.ifnames=0 mac=86:37:20:48:cb:3e | |
| [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) | |
| [ 0.000000@0] Memory: 1641772K/2077696K available (10134K kernel code, 895K rwdata, 3764K rodata, 1180K init, 5772K bss, 435924K reserved) | |
| [ 0.000000@0] Virtual kernel memory layout: | |
| [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB) | |
| [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff80423cc800 ( 35 MB) | |
| [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) | |
| [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07f100000 ( 2033 MB) | |
| [ 0.000000@0] .init : 0xffffffc001e14000 - 0xffffffc001f3b180 ( 1181 kB) | |
| [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001e13a24 ( 13903 kB) | |
| [ 0.000000@0] .data : 0xffffffc001f3c000 - 0xffffffc00201bfb8 ( 896 kB) | |
| [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01e12fff] | |
| [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, Nodes=1 | |
| [ 0.000000@0] arch_multi_cluster:1 | |
| [ 0.000000@0] Preemptible hierarchical RCU implementation. | |
| [ 0.000000@0] RCU debugfs-based tracing is enabled. | |
| [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 | |
| [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys). | |
| [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns | |
| [ 0.000034@0] meson_bc_timer: mclk->mux_reg =ffffff8000014990,mclk->reg =ffffff8000016994 | |
| [ 0.000358@0] Console: colour dummy device 80x25 | |
| [ 0.000879@0] console [tty0] enabled | |
| [ 0.000901@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) | |
| [ 0.000925@0] pid_max: default: 32768 minimum: 301 | |
| [ 0.001038@0] Security Framework initialized | |
| [ 0.001070@0] AppArmor: AppArmor initialized | |
| [ 0.001120@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.001136@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.003564@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1" | |
| [ 0.003596@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1" | |
| [ 0.003614@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1" | |
| [ 0.003632@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1" | |
| [ 0.006430@0] Initializing cgroup subsys debug | |
| [ 0.006451@0] Initializing cgroup subsys freezer | |
| [ 0.006498@0] ftrace: allocating 35111 entries in 138 pages | |
| [ 0.050338@0] /cpus/cpu@0: Missing clock-frequency property | |
| [ 0.050371@0] /cpus/cpu@1: Missing clock-frequency property | |
| [ 0.050387@0] /cpus/cpu@2: Missing clock-frequency property | |
| [ 0.050403@0] /cpus/cpu@3: Missing clock-frequency property | |
| [ 0.050419@0] /cpus/cpu@100: Missing clock-frequency property | |
| [ 0.050436@0] /cpus/cpu@101: Missing clock-frequency property | |
| [ 0.050454@0] /cpus/cpu@102: Missing clock-frequency property | |
| [ 0.050473@0] /cpus/cpu@103: Missing clock-frequency property | |
| [ 0.050490@0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available | |
| [ 0.090109@0] Meson chip version = RevA (22:A - 82:0) | |
| [ 0.110223@1] CPU1: Booted secondary processor | |
| [ 0.130224@2] CPU2: Booted secondary processor | |
| [ 0.150222@3] CPU3: Booted secondary processor | |
| [ 0.170246@4] CPU4: Booted secondary processor | |
| [ 0.190246@5] CPU5: Booted secondary processor | |
| [ 0.210264@6] CPU6: Booted secondary processor | |
| [ 0.230275@7] CPU7: Booted secondary processor | |
| [ 0.230361@0] Brought up 8 CPUs | |
| [ 0.230443@0] SMP: Total of 8 processors activated. | |
| [ 0.230981@0] devtmpfs: initialized | |
| [ 0.236230@2] sched: registering cpufreq notifiers for scale-invariant loads | |
| [ 0.236359@2] instabooting: 0 | |
| [ 0.242390@2] xor: measuring software checksum speed | |
| [ 0.340062@2] 8regs : 2291.600 MB/sec | |
| [ 0.440089@2] 8regs_prefetch: 2158.800 MB/sec | |
| [ 0.540117@2] 32regs : 2615.200 MB/sec | |
| [ 0.640145@2] 32regs_prefetch: 2364.400 MB/sec | |
| [ 0.640157@2] xor: using function: 32regs (2615.200 MB/sec) | |
| [ 0.640176@2] pinctrl core: initialized pinctrl subsystem | |
| [ 0.640815@2] regulator-dummy: no parameters | |
| [ 0.641576@3] NET: Registered protocol family 16 | |
| [ 0.643303@3] cpuidle: using governor menu | |
| [ 0.643536@2] aml_vdac_init: module init | |
| [ 0.643700@2] register canvas platform driver | |
| [ 0.643791@2] register rdma platform driver | |
| [ 0.644506@2] vdso: 2 pages (1 code, 1 data) at base ffffffc001f44000 | |
| [ 0.644563@2] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.644953@2] DMA: preallocated 256 KiB pool for atomic allocations | |
| [ 0.645924@2] software IO TLB [mem 0x64400000-0x64800000] (4MB) mapped at [ffffffc064400000-ffffffc0647fffff] | |
| [ 0.646396@2] aml_i2c version: 20140813 | |
| [ 0.646636@2] i2c-core: driver [pmu4] using legacy resume method | |
| [ 0.646728@3] codec_mm:codec_mm_module_init | |
| [ 0.646973@2] aml_watch_point_probe, in | |
| [ 0.647414@0] gxbb_mpll_clk: register mpll_clk_out0 success done | |
| [ 0.647435@0] gxbb_mpll_clk: register mpll_clk_out1 success done | |
| [ 0.647450@0] gxbb_mpll_clk: register mpll_clk_out2 success done | |
| [ 0.647658@0] clk_sys: register PLL sys_pll success done | |
| [ 0.647678@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz | |
| [ 0.647691@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz | |
| [ 0.647703@0] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz | |
| [ 0.647715@0] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz | |
| [ 0.647727@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz | |
| [ 0.647739@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz | |
| [ 0.647751@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz | |
| [ 0.647763@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz | |
| [ 0.647775@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz | |
| [ 0.647812@0] gxl_clk: clock initialization complete | |
| [ 0.648021@0] clkmsr: Gxl msr_clk_reg0=ffffff800006475c,msr_clk_reg2=ffffff8000066764 | |
| [ 0.650563@2] aml_iomap: amlogic iomap probe done | |
| [ 0.651228@3] pinmux-gxl c1109880.pinmux: Init pinux probe! | |
| [ 0.652373@2] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver | |
| [ 0.652842@3] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc) | |
| [ 0.652876@3] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc) | |
| [ 0.653050@3] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc) | |
| [ 0.653077@3] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc) | |
| [ 0.659732@3] codec_mm has 2 memory regions | |
| [ 0.659787@3] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok | |
| [ 0.659810@3] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok | |
| [ 0.659922@2] codec_mm has 2 memory regions | |
| [ 0.659948@2] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok | |
| [ 0.659970@2] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok | |
| [ 0.662023@2] vpu: driver version: v02 | |
| [ 0.662066@2] vpu: load vpu_clk: 666667000Hz(7) | |
| [ 0.662166@3] vpu: vpu_probe OK | |
| [ 0.663756@2] tv_vout: tvout_probe | |
| [ 0.663786@2] tv_vout: major number 254 for disp | |
| [ 0.663798@2] vout_notify: vout_register_server | |
| [ 0.663808@2] tv_vout: register tv module server ok | |
| [ 0.663916@3] tv_vout: tvout_probe OK | |
| [ 0.664565@3] canvas_probe reg=00000000c8838000,size=400 | |
| [ 0.664603@3] canvas maped reg_base =ffffff8000188000 | |
| [ 0.668424@2] rdma_probe | |
| [ 0.926906@2] bio: create slab <bio-0> at 0 | |
| [ 1.090780@0] raid6: int64x1 484 MB/s | |
| [ 1.260821@0] raid6: int64x2 716 MB/s | |
| [ 1.430922@0] raid6: int64x4 1035 MB/s | |
| [ 1.600990@0] raid6: int64x8 1197 MB/s | |
| [ 1.771110@0] raid6: neonx1 771 MB/s | |
| [ 1.941137@0] raid6: neonx2 1201 MB/s | |
| [ 2.111215@0] raid6: neonx4 1563 MB/s | |
| [ 2.281329@0] raid6: neonx8 1724 MB/s | |
| [ 2.281340@0] raid6: using algorithm neonx8 (1724 MB/s) | |
| [ 2.281351@0] raid6: using intx1 recovery algorithm | |
| [ 2.282144@2] SCSI subsystem initialized | |
| [ 2.282653@3] usbcore: registered new interface driver usbfs | |
| [ 2.282771@2] usbcore: registered new interface driver hub | |
| [ 2.282912@2] usbcore: registered new device driver usb | |
| [ 2.283819@2] i2c-gpio i2c_gpio.38: using pins 172 (SDA) and 173 (SCL) | |
| [ 2.283955@2] Linux video capture interface: v2.00 | |
| [ 2.284166@2] pps_core: LinuxPPS API ver. 1 registered | |
| [ 2.284181@2] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 2.284255@2] PTP clock support registered | |
| [ 2.284843@2] hdmitx: system: amhdmitx_init | |
| [ 2.284862@2] hdmitx: system: Ver: 2014May6 | |
| [ 2.285037@2] hdmitx: system: amhdmitx_probe | |
| [ 2.285393@3] hdmitx: system: not find match init-data | |
| [ 2.285409@3] hdmitx: system: not find match pwr-ctl | |
| [ 2.285423@3] hdmitx hpd irq = 89 | |
| [ 2.285867@2] hdmitx20: Mapped PHY: 0xc0800000 | |
| [ 2.285889@2] hdmitx20: Mapped PHY: 0xc1104400 | |
| [ 2.285916@2] hdmitx20: Mapped PHY: 0xc8100000 | |
| [ 2.285927@2] hdmitx20: Mapped PHY: 0xc8834000 | |
| [ 2.285939@2] hdmitx20: Mapped PHY: 0xc883a000 | |
| [ 2.285951@2] hdmitx20: Mapped PHY: 0xc883c000 | |
| [ 2.285966@2] hdmitx20: Mapped PHY: 0xd0100000 | |
| [ 2.285978@2] hdmitx20: Mapped PHY: 0xda83a000 | |
| [ 2.286224@2] avmute set to 1 | |
| [ 2.286555@2] vout_serve: vout_init_module | |
| [ 2.286692@2] vout_serve: no matched vout_init mode | |
| [ 2.286779@2] vinfo: error: invalid vinfo. current vmode is not supported | |
| [ 2.286794@2] vout_serve: create vout attribute OK | |
| [ 2.286804@2] vout_serve: meson_vout_probe OK | |
| [ 2.286978@2] logo: logo_init | |
| [ 2.287083@3] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 2.287686@3] NetLabel: Initializing | |
| [ 2.287703@3] NetLabel: domain hash size = 128 | |
| [ 2.287713@3] NetLabel: protocols = UNLABELED CIPSOv4 | |
| [ 2.287768@3] NetLabel: unlabeled traffic allowed by default | |
| [ 2.288798@2] Switched to clocksource arch_sys_counter | |
| [ 2.301724@2] FS-Cache: Loaded | |
| [ 2.301871@2] AppArmor: AppArmor Filesystem Enabled | |
| [ 2.312073@3] NET: Registered protocol family 2 | |
| [ 2.312573@3] TCP established hash table entries: 16384 (order: 5, 131072 bytes) | |
| [ 2.312731@3] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) | |
| [ 2.312989@3] TCP: Hash tables configured (established 16384 bind 16384) | |
| [ 2.313064@3] TCP: reno registered | |
| [ 2.313081@3] UDP hash table entries: 1024 (order: 3, 32768 bytes) | |
| [ 2.313132@3] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) | |
| [ 2.313345@3] NET: Registered protocol family 1 | |
| [ 2.313622@1] RPC: Registered named UNIX socket transport module. | |
| [ 2.313641@1] RPC: Registered udp transport module. | |
| [ 2.313652@1] RPC: Registered tcp transport module. | |
| [ 2.313663@1] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 2.313884@1] aml_wifi wifi.33: [wifi_dev_probe] no power_on_pin2 | |
| [ 2.313901@1] aml_wifi wifi.33: [wifi_dev_probe] set pwm as 32k output | |
| [ 2.313961@1] aml_wifi wifi.33: [wifi_dev_probe] interrupt_pin=241 | |
| [ 2.313976@1] aml_wifi wifi.33: [wifi_dev_probe] irq_num=100, irq_trigger_type=1 | |
| [ 2.313993@1] aml_wifi wifi.33: [wifi_dev_probe] power_on_pin=240 | |
| [ 2.314006@1] aml_wifi wifi.33: [wifi_dev_probe] clock_32k_pin=0 | |
| [ 2.314389@3] aml_wifi wifi.33: [wifi_setup_dt] wifi_setup_dt | |
| [ 2.314442@3] aml_wifi wifi.33: [wifi_setup_dt] interrupt_pin(241) | |
| [ 2.314471@3] aml_wifi wifi.33: [wifi_setup_dt] power_on_pin(240) | |
| [ 2.314782@0] Unpacking initramfs... | |
| [ 2.472956@0] Freeing initrd memory: 3836K (ffffffc073af7000 - ffffffc073eb6000) | |
| [ 2.475885@0] futex hash table entries: 2048 (order: 5, 131072 bytes) | |
| [ 2.476001@0] audit: initializing netlink subsys (disabled) | |
| [ 2.476066@0] audit: type=2000 audit(2.440:1): initialized | |
| [ 2.476964@3] HugeTLB registered 2 MB page size, pre-allocated 0 pages | |
| [ 2.484010@0] VFS: Disk quotas dquot_6.5.2 | |
| [ 2.484255@0] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 2.487276@0] NFS: Registering the id_resolver key type | |
| [ 2.487324@0] Key type id_resolver registered | |
| [ 2.487335@0] Key type id_legacy registered | |
| [ 2.487352@0] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 2.488053@0] msgmni has been set to 3614 | |
| [ 2.489409@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | |
| [ 2.489441@0] io scheduler noop registered (default) | |
| [ 2.489453@0] io scheduler deadline registered | |
| [ 2.489637@0] io scheduler cfq registered | |
| [ 2.491210@0] meson-rng c8834000.rng: hwrng registered | |
| [ 2.495000@0] loop: module loaded | |
| [ 2.495974@1] mtdoops: mtd device (mtddev=name/number) must be supplied | |
| [ 2.497107@0] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 2.497132@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
| [ 2.626768@0] libphy: stmmac: probed | |
| [ 2.626798@0] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active | |
| [ 2.626812@0] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07) | |
| [ 2.627285@1] PPP generic driver version 2.4.2 | |
| [ 2.627560@1] NET: Registered protocol family 24 | |
| [ 2.627724@0] usbcore: registered new interface driver cdc_ether | |
| [ 2.627831@0] usbcore: registered new interface driver net1080 | |
| [ 2.627927@1] usbcore: registered new interface driver cdc_subset | |
| [ 2.628022@0] usbcore: registered new interface driver zaurus | |
| [ 2.628147@0] usbcore: registered new interface driver cdc_ncm | |
| [ 2.628668@0] platform c9000000.dwc3: Driver dwc3 requests probe deferral | |
| [ 2.628846@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 2.628863@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver | |
| [ 2.629127@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 2.629513@0] usbcore: registered new interface driver cdc_acm | |
| [ 2.629533@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
| [ 2.629651@1] usbcore: registered new interface driver usb-storage | |
| [ 2.629891@0] usbcore: registered new interface driver usbserial | |
| [ 2.629986@1] usbcore: registered new interface driver usbserial_generic | |
| [ 2.630077@0] usbserial: USB Serial support registered for generic | |
| [ 2.630171@0] usbcore: registered new interface driver pl2303 | |
| [ 2.630258@1] usbserial: USB Serial support registered for pl2303 | |
| [ 2.630859@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80001be000 | |
| [ 2.631097@1] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port | |
| [ 2.631132@1] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80001de080 | |
| [ 2.631617@1] mousedev: PS/2 mouse device common for all mice | |
| [ 2.632056@1] usbcore: registered new interface driver xpad | |
| [ 2.632303@0] i2c /dev entries driver | |
| [ 2.632660@0] usbcore: registered new interface driver uvcvideo | |
| [ 2.632679@0] USB Video Class driver (1.1.1) | |
| [ 2.633562@1] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com | |
| [ 2.633851@1] CPUidle arm64: cpuidle init start!! | |
| [ 2.634351@1] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 2.634533@0] hidraw: raw HID events driver (C) Jiri Kosina | |
| [ 2.634803@0] usbcore: registered new interface driver usbhid | |
| [ 2.634817@0] usbhid: USB HID core driver | |
| [ 2.635690@0] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80001f64c0 | |
| [ 2.635737@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart | |
| [ 2.635766@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200 | |
| [ 4.154579@0] console [ttyS0] enabled | |
| [ 4.158675@0] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001f84c0 | |
| [ 4.165301@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart | |
| [ 4.175319@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0 | |
| [ 4.183202@0] dwc_otg_driver_probe host only, not probe usb_otg!!! | |
| [ 4.189545@0] meson-gpu-clkgen c883c000.gpu_clk: can't request region for resource [mem 0xc883c000-0xc883cfff] | |
| [ 4.199272@0] meson-gpu-clkgen: probe of c883c000.gpu_clk failed with error -16 | |
| [ 4.206731@1] hdmitx: system: hdmitx_hdcp_init | |
| [ 4.211100@0] ESM HLD: Initializing... | |
| [ 4.214597@0] ESM HLD: Registering device range 'esm'... | |
| [ 4.219882@0] ESM HLD: Device range 'esm' has been registered. | |
| [ 4.225636@0] ESM HLD: Creating class /sys/class/elliptic... | |
| [ 4.231352@0] ESM HLD: The class /sys/class/elliptic has been created. | |
| [ 4.237711@0] ESM HLD: Creating device 'esm'... | |
| [ 4.242414@1] ESM HLD: Device 'esm' has been created. | |
| [ 4.247198@1] ESM HLD: Done initializing the HLD driver. | |
| INFO: HDCP22 key read fail! | |
| INFO: p1d 0 | |
| INFO: pd1 0 | |
| [ 4.268502@0] aml_vrtc rtc.32: rtc core: registered aml_vrtc as rtc0 | |
| [ 4.269950@0] secmon has 1 memory regions | |
| [ 4.273225@0] secmon: share in base: 0xffffff8000404000, share out base: 0xffffff8000406000 | |
| [ 4.281487@0] secmon secmon.4: assigned reserved memory node linux,secmon ok | |
| [ 4.288452@0] secmon: probe done | |
| [ 4.292006@0] storage: storage in base: 0xffffff8001600000 | |
| [ 4.297077@0] storage: storage out base: 0xffffff8001680000 | |
| [ 4.302606@0] storage: storage block base: 0xffffff8001700000 | |
| [ 4.308289@0] storage: probe done! | |
| [ 4.312211@0] aml_sd_emmc_probe: line 3558 | |
| [ 4.315709@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error | |
| [ 4.325690@0] aml_sd_emmc_reg_init 1146 | |
| [ 4.329011@0] get property: ocr_avail, value:0x00200080 | |
| [ 4.335373@0] get property: f_min, value:300000 | |
| [ 4.341504@0] get property: f_max, value:100000000 | |
| [ 4.347879@0] get property: max_req_size, value:0x00020000 | |
| [ 4.354369@0] get property: pinname, str:emmc | |
| [ 4.360135@0] get property: card_type, value:1 | |
| [ 4.365836@0] get property: gpio_dat3, str: | |
| [ 4.371266@0] get property: hw_reset, str: | |
| [ 4.376722@0] emmc:pdata->caps = c0000d47 | |
| [ 4.380665@0] emmc:pdata->caps2 = 18060 | |
| [ 4.384460@0] storage 1, boot 1 | |
| [ 4.387553@0] get_storage_dev return 1 | |
| [ 4.428803@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! | |
| [ 4.429038@1] aml_sd_emmc_probe: line 3558 | |
| [ 4.433466@1] aml_sd_emmc_reg_init 1146 | |
| [ 4.436904@1] get property: ocr_avail, value:0x00200080 | |
| [ 4.443342@1] get property: f_min, value:400000 | |
| [ 4.449455@1] get property: f_max, value:100000000 | |
| [ 4.455830@1] get property: max_req_size, value:0x00020000 | |
| [ 4.462311@1] get property: irq_in, value:3 | |
| [ 4.467991@1] get property: irq_out, value:5 | |
| [ 4.473698@1] get property: gpio_cd, str: | |
| [ 4.479125@1] get property: pinname, str:sd | |
| [ 4.484725@1] get property: jtag_pin, str: | |
| [ 4.490164@1] get property: card_type, value:5 | |
| [ 4.495851@1] get property: gpio_dat3, str: | |
| [ 4.501304@1] sd:pdata->caps = 7 | |
| [ 4.504474@1] sd:pdata->caps2 = 0 | |
| [ 4.539001@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! | |
| [ 4.539040@4] [aml_is_card_insert] card IN | |
| [ 4.543295@1] aml_sd_emmc_probe: line 3558 | |
| [ 4.547687@1] aml_sd_emmc_reg_init 1146 | |
| [ 4.551173@1] get property: ocr_avail, value:0x00200080 | |
| [ 4.557578@1] get property: f_min, value:400000 | |
| [ 4.563709@1] get property: f_max, value:200000000 | |
| [ 4.570092@1] get property: max_req_size, value:0x00020000 | |
| [ 4.576557@1] get property: pinname, str:sdio | |
| [ 4.582339@1] get property: card_type, value:3 | |
| [ 4.588070@1] sdio:pdata->caps = 7810f | |
| [ 4.591739@1] sdio:pdata->caps2 = 0 | |
| [ 4.615534@3] emmc: BKOPS_EN bit is not set | |
| [ 4.624674@3] emmc: trying cali 0-th time(s) | |
| [ 4.627604@3] emmc: delay[0]= 4600 padding= 2, bidx=4 | |
| [ 4.628312@3] emmc: delay[1]= 4600 padding= 2, bidx=4 | |
| [ 4.633329@3] gmmc: delay[2]= 4400 padding= 3, bidx=4 | |
| [ 4.633339@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! | |
| [ 4.633698@1] ion_dev has 1 memory regions | |
| [ 4.640392@4] normal card in | |
| [ 4.650623@1] fb: osd_init_module | |
| [ 4.650753@1] fb: viu vsync irq: 35 | |
| [ 4.650758@1] fb: failed to init reserved memory | |
| [ 4.650775@1] tv_vout: tv_set_current_vmode[759]fps_target_mode=16 | |
| [ 4.650779@1] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60 | |
| [ 4.650788@1] tv_vout: TV mode 1080p60hz selected. | |
| [ 4.650792@1] | |
| [ 4.650792@1] vdac_enable: on:0,module_sel:8 | |
| [ 4.650799@1] | |
| [ 4.650799@1] vdac_enable: on:0,module_sel:8 | |
| [ 4.650804@1] tv_vout: new mode =1080p60hz set ok | |
| [ 4.650806@1] vout_serve: vinfo mode is: 1080p60hz | |
| [ 4.651063@1] osd_rdma: osd_rdma_init: rdma_table p=0x74846000,op=0x74846000 , v=0xffffff800041e000 | |
| [ 4.651065@1] osd_rdma: osd rdma request irq as second interrput function! | |
| [ 4.651080@1] fb: osd_probe vinfo:ffffffc001fbd8a8 | |
| [ 4.651086@1] fb: init fbdev bpp is:32 | |
| [ 4.725354@0] fb: use ion buffer for fb memory | |
| [ 4.725367@3] emmc: delay[3]= 4800 padding= 1, bidx=4 | |
| [ 4.725369@3] emmc: delay[4]= 4800 padding= 1, bidx=4 | |
| [ 4.725371@3] emmc: delay[5]= 4800 padding= 1, bidx=4 | |
| [ 4.725374@3] emmc: delay[6]= 4600 padding= 2, bidx=4 | |
| [ 4.725376@3] emmc: delay[7]= 4800 padding= 1, bidx=4 | |
| [ 4.725378@3] emmc: calibration result @ 0: max(4800), min(4400) | |
| [ 4.725382@3] emmc: line_delay =0x1000211, max_cal_result =4800 | |
| [ 4.725383@3] emmc: base_index_max 4, base_index_min 4 | |
| [ 4.725388@3] emmc: clk 100000000 SDR mode tuning start | |
| [ 4.726005@0] meson-fb meson-fb.16: create ion_client ffffffc06532c600, handle=ffffffc065227640 | |
| [ 4.726010@0] meson-fb meson-fb.16: ion memory(0): created fb at 0x0000000079300000, size 24 MiB | |
| [ 4.726016@0] fb: Frame buffer memory assigned at | |
| [ 4.726016@0] fb: 0, phy: 0x0000000079300000, vir:0xffffff80018c4000, size=24900K | |
| [ 4.726016@0] | |
| [ 4.726019@0] fb: ---------------clear fb0 memory ffffff80018c4000 | |
| [ 4.726119@3] emmc: rx_tuning_result[0] = 10 | |
| [ 4.726625@3] emmc: rx_tuning_result[1] = 10 | |
| [ 4.727138@3] emmc: rx_tuning_result[2] = 10 | |
| [ 4.727652@3] emmc: rx_tuning_result[3] = 10 | |
| [ 4.728169@3] emmc: rx_tuning_result[4] = 10 | |
| [ 4.728675@3] emmc: rx_tuning_result[5] = 10 | |
| [ 4.729193@3] emmc: rx_tuning_result[6] = 10 | |
| [ 4.729704@3] emmc: rx_tuning_result[7] = 10 | |
| [ 4.730209@3] emmc: rx_tuning_result[8] = 10 | |
| [ 4.730261@3] emmc: best_win_start =0, best_win_size =9 | |
| [ 4.730264@3] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x42000 | |
| [ 4.730267@3] emmc: gclock =0x100024a, gdelay=0x1000211, gadjust=0x42000 | |
| [ 4.730593@3] emmc: new HS200 MMC card at address 0001 | |
| [ 4.731112@1] emmc: clock 100000000, 8-bit-bus-width | |
| [ 4.731112@1] | |
| [ 4.731112@1] mmcblk0: emmc:0001 NCard 14.4 GiB | |
| [ 4.731250@1] mmcblk0boot0: emmc:0001 NCard partition 1 4.00 MiB | |
| [ 4.731380@1] mmcblk0boot1: emmc:0001 NCard partition 2 4.00 MiB | |
| [ 4.731515@1] mmcblk0rpmb: emmc:0001 NCard partition 3 4.00 MiB | |
| [ 4.732241@3] mmcblk0: unknown partition table | |
| [ 4.732947@3] [mmc_read_partition_tbl] mmc read partition OK! | |
| [ 4.732948@3] add_emmc_partition | |
| [ 4.733189@3] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000 | |
| [ 4.733376@3] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000 | |
| [ 4.733536@3] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000 | |
| [ 4.733696@3] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000 | |
| [ 4.733861@3] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000 | |
| [ 4.734021@3] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000 | |
| [ 4.734183@3] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000 | |
| [ 4.734337@3] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000 | |
| [ 4.734518@3] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000 | |
| [ 4.734679@3] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000 | |
| [ 4.734836@3] [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000 | |
| [ 4.734995@3] [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000 | |
| [ 4.735161@3] [mmcblk0p13] system offset 0x000057400000, size 0x000080000000 | |
| [ 4.735318@3] [mmcblk0p14] data offset 0x0000d7c00000, size 0x0002c5400000 | |
| [ 4.735351@3] card key: card_blk_probe. | |
| [ 4.735355@3] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220 | |
| [ 4.735358@3] emmc key: emmc_key_init:552 ok. | |
| [ 4.735582@3] amlmmc_dtb_init: register dtb chardev | |
| [ 4.735658@3] amlmmc_dtb_init: register dtb chardev OK | |
| [ 4.735658@3] Exit aml_emmc_partition_ops OK. | |
| [ 4.736756@3] mmcblk0boot1: unknown partition table | |
| [ 4.737609@0] fb: osd[0] canvas.idx =0x40 | |
| [ 4.737611@3] mmcblk0boot0: unknown partition table | |
| [ 4.737613@0] fb: osd[0] canvas.addr=0x79300000 | |
| [ 4.737615@0] fb: osd[0] canvas.width=7680 | |
| [ 4.737616@0] fb: osd[0] canvas.height=3240 | |
| [ 4.737618@0] fb: osd[0] frame.width=1920 | |
| [ 4.737619@0] fb: osd[0] frame.height=1080 | |
| [ 4.737869@3] clear_emmc_wait_flag | |
| [ 4.814044@3] sd: new high speed SDHC card at address aaaa | |
| [ 4.814469@3] sd: clock 50000000, 4-bit-bus-width | |
| [ 4.814469@3] | |
| [ 4.814469@3] mmcblk1: sd:aaaa SL08G 7.40 GiB | |
| [ 4.815558@3] mmcblk1: p1 p2 | |
| [ 4.854922@0] Console: switching to colour frame buffer device 240x67 | |
| [ 5.328803@0] fb: osd probe OK | |
| [ 5.333232@1] ge2d: ge2d_init_module | |
| [ 5.337379@1] ge2d: ge2d_dev major:242 | |
| [ 5.341989@0] ge2d: ge2d clock is 400 MHZ | |
| [ 5.346031@0] ge2d: ge2d: pdev=ffffffc06527c400, irq=182, rstc=0xffffffc065233380, clk=ffffffc065242700 | |
| [ 5.353909@0] ge2d: mapped phy: 0xd0160000 | |
| [ 5.357942@0] ge2d: ge2d start monitor | |
| [ 5.361976@2] ge2d: ge2d workqueue monitor start | |
| [ 5.362337@1] codec:Amlogic A/V streaming port init | |
| [ 5.364161@0] codec:get gate demux control ok ffffffc064152800 | |
| [ 5.364167@0] codec:get gate parser_top control ok ffffffc064152880 | |
| [ 5.364171@0] codec:get gate vpu_intr control ok ffffffc064152900 | |
| [ 5.364178@0] codec:get gate vdec control ok ffffffc064152980 | |
| [ 5.364792@0] codec:[tsync_pcr_init]init success. | |
| [ 5.364794@0] codec:amvideocap_init_module | |
| [ 5.364924@0] codec:amvideocap_probe,amvideocap | |
| [ 5.364926@0] codec:use cma buf. | |
| [ 5.364928@0] codec:amvideocap_dev_register | |
| [ 5.366676@0] amvenc_avc_probe -- reserved memory config fail. | |
| [ 5.366680@0] amvenc_avc - cma memory pool size: 40 MB | |
| [ 5.366700@0] encode_wq_init. | |
| [ 5.366705@0] encode start monitor. | |
| [ 5.366760@1] encode workqueue monitor start. | |
| [ 5.367248@0] jpegenc module init | |
| [ 5.367562@1] codec:picdec_driver_probe called. | |
| [ 5.367565@1] picdec has 1 memory regions | |
| [ 5.367590@1] codec:picdec_driver_probe done. | |
| [ 5.368713@1] codec:create_ge2d_work_queue video task ok | |
| [ 5.369206@0] codec:used fix clk for vdec clk source! | |
| [ 5.369212@0] codec:register clk_set_setting cpu[34] | |
| [ 5.369539@0] vpu_init | |
| [ 5.369703@0] vpu_probe | |
| [ 5.369706@0] HevcEnc reserved memory config fail. | |
| [ 5.369710@0] HevcEnc - cma memory pool size: 64 MB | |
| [ 5.369712@0] HevcEnc - wave420l_irq: 219 | |
| [ 5.369750@0] vpu base address get from platform driver physical base addr=0xc8810000, virtual base=0xffffff8000588000 | |
| [ 5.370103@0] success to probe vpu device with video memory from cma | |
| [ 5.370264@1] DI: di_module_init ok. | |
| [ 5.370269@1] DI: di_module_init: major 235 | |
| [ 5.370485@0] DI: di_probe | |
| [ 5.370672@1] deinterlace has 1 memory regions | |
| [ 5.370710@1] deinterlace deinterlace.26: assigned reserved memory node linux,di ok | |
| [ 5.370732@1] di_irq:78,timerc_irq:38 | |
| [ 5.534618@1] rdma_register, rdma_table_addr ffffff8000581000 rdma_table_addr_phy 74848000 reg_buf ffffffc06424c000 | |
| [ 5.544489@1] rdma_register success, handle 1 table_size 8192 | |
| [ 5.549920@1] DI: di_probe allocate rdma channel 1. | |
| [ 5.554745@1] DI: DI hw version 2. | |
| [ 5.559522@1] 0x000000db:Y=db,U=0,V=0 | |
| [ 5.564236@1] 0x000000dc:Y=dc,U=0,V=0 | |
| [ 5.568905@1] 0x000000dd:Y=dd,U=0,V=0 | |
| [ 5.573570@1] 0x000000de:Y=de,U=0,V=0 | |
| [ 5.578184@1] 0x000000df:Y=df,U=0,V=0 | |
| [ 5.582751@1] 0x000000e0:Y=e0,U=0,V=0 | |
| [ 5.587258@1] 0x000000e1:Y=e1,U=0,V=0 | |
| [ 5.591755@1] 0x000000e2:Y=e2,U=0,V=0 | |
| [ 5.596153@1] 0x000000e3:Y=e3,U=0,V=0 | |
| [ 5.600547@1] 0x000000f0:Y=f0,U=0,V=0 | |
| [ 5.604930@1] 0x000000f1:Y=f1,U=0,V=0 | |
| [ 5.609297@1] 0x000000f2:Y=f2,U=0,V=0 | |
| [ 5.613649@1] 0x000000f3:Y=f3,U=0,V=0 | |
| [ 5.617961@1] 0x000000f4:Y=f4,U=0,V=0 | |
| [ 5.622215@1] 0x000000f5:Y=f5,U=0,V=0 | |
| [ 5.626406@1] 0x000000f6:Y=f6,U=0,V=0 | |
| [ 5.630564@1] 0x000000f7:Y=f7,U=0,V=0 | |
| [ 5.634679@1] 0x000000f8:Y=f8,U=0,V=0 | |
| [ 5.638751@1] 0x000000f9:Y=f9,U=0,V=0 | |
| [ 5.642750@1] 0x000000fa:Y=fa,U=0,V=0 | |
| [ 5.646659@1] 0x000000fb:Y=fb,U=0,V=0 | |
| [ 5.650538@1] 0x000000fc:Y=fc,U=0,V=0 | |
| [ 5.654567@1] DI: di_probe here. | |
| [ 5.658881@1] efusekeynum: 4 | |
| [ 5.662697@1] efusekeyname: mac offset: 0 size: 6 | |
| [ 5.667207@1] efusekeyname: mac_bt offset: 6 size: 6 | |
| [ 5.673620@1] efusekeyname: mac_wifi offset: 12 size: 6 | |
| [ 5.679994@1] efusekeyname: usid offset: 18 size: 16 | |
| [ 5.686761@1] efuse efuse.10: probe OK! | |
| [ 5.690905@0] key unify config unifykey-num is 14 | |
| [ 5.694843@0] key unify fact unifykey-num is 14 | |
| [ 5.699313@0] aml_unifykeys_probe:1273=============unifykey_devno:e900000 | |
| [ 5.706424@1] 6unifykey: device unifykeys created ok | |
| [ 5.711232@0] 6aml_unifykeys_init done! | |
| [ 5.714959@0] PPMGRDRV: warn: ppmgr module init func called | |
| [ 5.720618@0] PPMGRDRV: err: ppmgr_driver_probe called | |
| [ 5.725508@0] ppmgr has 1 memory regions | |
| [ 5.729438@0] PPMGRDRV: info: ppmgr_dev major:232 | |
| [ 5.734482@1] PPMGRDRV: info: ppmgr_probe done | |
| [ 5.739009@0] amlogic rfkill init | |
| [ 5.742954@0] enter bt_probe of_node | |
| [ 5.746728@0] not get gpio_en | |
| [ 5.750491@0] power on valid level is high | |
| [ 6.169370@1] ionvideo-000: V4L2 device registered as video13 | |
| [ 6.176967@1] ionvid: info: Video Technology Magazine Ion Video | |
| [ 6.182873@1] ionvid: info: Capture Board ver 1.0 successfully loaded | |
| [ 6.189245@1] audio_dsp: [dsp]register dsp to char divece(257) | |
| [ 6.195980@1] amaudio: amaudio: driver amaudio succuess! | |
| [ 6.200680@1] amlvid:err: amlvideo_init called | |
| [ 6.204480@2] amlvid:err: amlvideo_create_instance called | |
| [ 6.212206@2] amlvid:err: v4l2_dev.name=:amlvideo-000 | |
| [ 6.217183@1] amlvideo-000: V4L2 device registered as video10 | |
| [ 6.223169@1] [RX]-hdmirx: hdmirx_init. | |
| [ 6.227161@1] ESM HLD: Initializing... | |
| [ 6.231144@1] ESM HLD: Registering device range 'esm_rx'... | |
| [ 6.235625@1] ESM HLD: Device range 'esm_rx' has been registered. | |
| [ 6.241674@1] ESM HLD: Creating class /sys/class/elliptic_rx... | |
| [ 6.247658@1] ESM HLD: The class /sys/class/elliptic_rx has been created. | |
| [ 6.254324@1] ESM HLD: Creating device 'esm_rx'... | |
| [ 6.259302@2] ESM HLD: Device 'esm_rx' has been created. | |
| [ 6.264251@2] ESM HLD: Done initializing the HLD driver. | |
| [ 6.269551@2] [viuin..]viuin_init_module viuin module init | |
| [ 6.275497@1] [viuin..]viuin_probe probe ok. | |
| [ 6.279359@2] module init | |
| [ 6.283098@2] | |
| [ 6.283098@2] VECM probe start | |
| [ 6.290451@1] aml_vecm_probe: ok | |
| [ 6.294693@1] saradc c1108680.saradc: initialized by BL30 | |
| [ 6.298330@1] saradc c1108680.saradc: calibration start: | |
| [ 6.303407@1] saradc c1108680.saradc: nominal=0, value=7 | |
| [ 6.308617@1] saradc c1108680.saradc: nominal=256, value=250 | |
| [ 6.314245@1] saradc c1108680.saradc: nominal=512, value=500 | |
| [ 6.319870@1] saradc c1108680.saradc: nominal=768, value=750 | |
| [ 6.325436@1] saradc c1108680.saradc: nominal=1023, value=998 | |
| [ 6.331107@1] saradc c1108680.saradc: calibration end: coef=4194 | |
| [ 6.337318@2] remote: Driver init | |
| [ 6.341222@2] remote: platform_data g_remote_ao_offset=580 | |
| [ 6.345749@2] remote: platform_data irq =228 | |
| [ 6.350011@2] remote: set drvdata completed | |
| [ 6.355942@2] remote: device_create_file completed | |
| [ 6.360575@2] input: aml_keypad as /devices/meson-remote.12/input/input0 | |
| [ 6.366198@2] remote: input_register_device completed | |
| [ 6.372071@2] remote: set_remote_mode[74] | |
| [ 6.377180@2] remote: remote config major:229 | |
| [ 6.381728@2] remote: physical address:0x635ca000 | |
| [ 6.386655@2] gpio-key gpio_keypad.48: gpio_key: 0 name(power) pin() | |
| [ 6.391742@2] gpio-key gpio_keypad.48: amlogic_gpio_name_map_num pin 0!:: | |
| [ 6.398458@2] gpio-key gpio_keypad.48: gpio_key: 0 power(147) | |
| [ 6.404174@2] gpio-key gpio_keypad.48: start setup_timer | |
| [ 6.409423@2] gpio-key gpio_keypad.48: power key(116) registed. | |
| [ 6.415550@1] input: gpio_keypad as /devices/gpio_keypad.48/input/input1 | |
| [ 6.422210@1] gpio-key gpio_keypad.48: gpio keypad register input device completed. | |
| [ 6.429540@1] input input1: gpio keypad major:228 | |
| [ 6.435214@1] Sensor: lsm303d_init | |
| [ 6.440281@1] Sensor: stk8313_init | |
| [ 6.445007@1] Sensor: stk831x_init | |
| [ 6.449714@2] Sensor: mxc622x_acc_init | |
| [ 6.454375@1] Sensor: mxc6255xc_acc_init | |
| [ 6.459025@1] Sensor: l3gd20_gyr_init | |
| [ 6.464736@1] cpuinfo: probe done | |
| [ 6.469582@1] defendkey c8834500.defendkey: defendkey_devno:e300000 | |
| [ 6.475025@1] defendkey c8834500.defendkey: defendkey: device defendkey created ok | |
| [ 6.482512@1] defendkey: driver init | |
| [ 6.487805@1] input: cec_input as /devices/virtual/input/input2 | |
| [ 6.492989@2] cectx aocec: aml_cec_probe(): no hdmirx reg resource | |
| [ 6.498707@2] cectx aocec: aml_cec_probe(): no hhi reg resource | |
| [ 6.504728@2] cectx aocec: aml_cec_probe(): can't find hdmirx | |
| [ 6.510291@2] input input1: key 116 up | |
| [ 6.515931@2] cec: wake up flag:0 | |
| [ 6.521074@1] aml_aes_dma c883e000.aml_aes: Aml AES_dma | |
| [ 6.526246@1] aml_tdes_dma c883e000.aml_tdes: Aml TDES_dma | |
| [ 6.531663@2] aml_sha_dma c883e000.aml_sha: Aml SHA1/SHA224/SHA256 dma | |
| [ 6.539098@1] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe | |
| [ 6.547042@3] aml_pcm_dai: pcm mode detection =1 | |
| [ 6.552216@0] aml_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4 | |
| [ 6.558362@0] aml_spdif_dai: set normal 512 fs /4 fs | |
| [ 6.563301@0] aml_audio_hw: IEC958 16bit | |
| [ 6.567879@0] hdmitx: audio: aout notify rate 48000 | |
| [ 6.572497@0] hdmitx: audio: aout notify size 16 | |
| [ 6.577024@0] hdmitx: audio: aout notify format CT_PCM | |
| [ 6.789009@3] aml_snd_card: headphone detection disable=1 | |
| [ 6.793623@3] aml_snd_card: no spk event delay time set | |
| [ 6.799141@3] aml_snd_m8_card aml_m8_snd.47: T9015-audio-hifi <-> I2S.40 mapping ok | |
| [ 6.806711@3] aml_snd_m8_card aml_m8_snd.47: dit-hifi <-> SPDIF.41 mapping ok | |
| [ 6.813326@3] aml_pcm: enter aml_pcm_new dai->name: PCM.42 dai->id: 0 | |
| [ 6.819746@3] aml_snd_m8_card aml_m8_snd.47: pcm2bt-pcm <-> PCM.42 mapping ok | |
| [ 6.826667@3] aml_snd_m8_card aml_m8_snd.47: ASoC: no source widget found for LOUTL | |
| [ 6.834248@3] aml_snd_m8_card aml_m8_snd.47: ASoC: Failed to add route LOUTL -> direct -> Ext Spk | |
| [ 6.843043@3] aml_snd_m8_card aml_m8_snd.47: ASoC: no source widget found for LOUTR | |
| [ 6.850629@3] aml_snd_m8_card aml_m8_snd.47: ASoC: Failed to add route LOUTR -> direct -> Ext Spk | |
| [BL31]: tee size: 0 | |
| [BL31]: tee size: 0 | |
| [BL31]: tee size: 0 | |
| [BL31]: tee size: 0 | |
| [ 6.866665@3] aml_snd_card: audio use jtag pinmux as i2s output, read val =0 | |
| WARNING: Unimplemented Sip Call: 0x82000036 | |
| [ 6.878232@1] GACT probability NOT on | |
| [ 6.883165@1] Mirror/redirect action on | |
| [ 6.887982@1] u32 classifier | |
| [ 6.892750@1] Actions configured | |
| [ 6.897523@1] Netfilter messages via NETLINK v0.30. | |
| [ 6.902438@1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) | |
| [ 6.908495@1] ctnetlink v0.93: registering with nfnetlink. | |
| [ 6.914209@1] xt_time: kernel timezone is -0000 | |
| [ 6.919435@1] ipip: IPv4 over IPv4 tunneling driver | |
| [ 6.925421@1] ip_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 6.930823@1] arp_tables: (C) 2002 David S. Miller | |
| [ 6.935990@1] TCP: cubic registered | |
| [ 6.941064@1] Initializing XFRM netlink socket | |
| [ 6.947090@2] NET: Registered protocol family 10 | |
| [ 6.953477@1] mip6: Mobile IPv6 | |
| [ 6.958657@1] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 6.964137@1] sit: IPv6 over IPv4 tunneling driver | |
| [ 6.970764@1] NET: Registered protocol family 17 | |
| [ 6.975960@1] NET: Registered protocol family 15 | |
| [ 6.981243@1] Bridge firewalling registered | |
| [ 6.986371@1] l2tp_core: L2TP core driver, V2.0 | |
| [ 6.991419@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) | |
| [ 6.996568@1] l2tp_netlink: L2TP netlink interface | |
| [ 7.001677@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) | |
| [ 7.007350@1] l2tp_debugfs: L2TP debugfs support | |
| [ 7.012547@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) | |
| [ 7.018714@1] NET: Registered protocol family 35 | |
| [ 7.023899@1] Key type dns_resolver registered | |
| [ 7.029713@1] Registering SWP/SWPB emulation handler | |
| [ 7.037318@1] bio: create slab <bio-1> at 1 | |
| [ 7.043656@1] Btrfs loaded | |
| [ 7.048970@1] BTRFS: selftest: Running btrfs free space cache tests | |
| [ 7.054810@1] BTRFS: selftest: Running extent only tests | |
| [ 7.060121@1] BTRFS: selftest: Running bitmap only tests | |
| [ 7.065347@1] BTRFS: selftest: Running bitmap and extent tests | |
| [ 7.071153@1] BTRFS: selftest: Free space cache tests finished | |
| [ 7.076889@1] BTRFS: selftest: Running extent buffer operation tests | |
| [ 7.083087@1] BTRFS: selftest: Running btrfs_split_item tests | |
| [ 7.093385@1] BTRFS: selftest: Running find delalloc tests | |
| [ 7.311612@1] BTRFS: selftest: Running btrfs_get_extent tests | |
| [ 7.316971@1] BTRFS: selftest: Running hole first btrfs_get_extent test | |
| [ 7.408891@3] AppArmor: AppArmor sha1 policy hashing enabled | |
| [ 7.414103@3] regulator-dummy: disabling | |
| [ 8.121783@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| [ 8.127023@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
| [ 8.135173@2] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000 | |
| [ 8.140929@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| [ 8.147694@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 8.155035@2] usb usb1: Product: xHCI Host Controller | |
| [ 8.160201@2] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd | |
| [ 8.165633@2] usb usb1: SerialNumber: xhci-hcd.0.auto | |
| [ 8.171475@2] hub 1-0:1.0: USB hub found | |
| [ 8.176628@2] hub 1-0:1.0: 3 ports detected | |
| [ 8.182034@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| [ 8.187185@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 | |
| [ 8.195082@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 | |
| [ 8.201835@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 8.209164@2] usb usb2: Product: xHCI Host Controller | |
| [ 8.214375@2] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd | |
| [ 8.219790@2] usb usb2: SerialNumber: xhci-hcd.0.auto | |
| [ 8.225616@2] hub 2-0:1.0: USB hub found | |
| [ 8.230838@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) | |
| [ 8.238358@4] console [netcon0] enabled | |
| [ 8.244634@4] netconsole: network logging started | |
| [ 8.250877@4] aml_vrtc rtc.32: setting system clock to 2015-01-01 00:00:13 UTC (1420070413) | |
| [ 8.261297@4] gxbb_pm: enter meson_pm_probe! | |
| [ 8.267641@4] gxbb_pm: meson_pm_probe done | |
| [ 8.274344@2] aml-thermal thermal: Frequency table not initialized. Deferring probe... | |
| [ 8.282061@2] platform thermal: Driver aml-thermal requests probe deferral | |
| [ 8.288935@2] aml_istbt_dev_ready NULL | |
| [ 8.294320@2] ALSA device list: | |
| [ 8.299641@2] #0: AML-M8AUDIO | |
| [ 8.305557@2] Freeing unused kernel memory: 1180K (ffffffc001e14000 - ffffffc001f3b000) | |
| [ 8.345835@2] systemd-udevd[2065]: starting version 215 | |
| [ 8.352594@2] random: systemd-udevd urandom read with 42 bits of entropy available | |
| [ 9.329202@0] EXT4-fs (mmcblk1p2): mounted filesystem with writeback data mode. Opts: data=writeback | |
| [ 9.665838@7] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) | |
| [ 9.681497@7] systemd[1]: Detected architecture 'arm64'. | |
| [ 9.724374@2] systemd[1]: Inserted module 'autofs4' | |
| [ 9.732000@2] systemd[1]: Set hostname to <amlogic-s905x>. | |
| [ 9.781885@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 | |
| [ 9.919868@0] random: nonblocking pool is initialized | |
| [ 10.011043@2] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. | |
| [ 10.028846@2] systemd[1]: Expecting device dev-ttyS0.device... | |
| [ 10.043462@2] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. | |
| [ 10.052822@2] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ 10.061983@2] systemd[1]: Starting Remote File Systems (Pre). | |
| [ 10.076504@2] systemd[1]: Reached target Remote File Systems (Pre). | |
| [ 10.084389@2] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. | |
| [ 10.102819@2] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
| [ 10.114178@2] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. | |
| [ 10.124224@2] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [ 10.134023@2] systemd[1]: Starting Paths. | |
| [ 10.149002@2] systemd[1]: Reached target Paths. | |
| [ 10.156312@2] systemd[1]: Starting Encrypted Volumes. | |
| [ 10.171281@2] systemd[1]: Reached target Encrypted Volumes. | |
| [ 10.178676@2] systemd[1]: Starting Swap. | |
| [ 10.193686@2] systemd[1]: Reached target Swap. | |
| [ 10.201016@2] systemd[1]: Expecting device dev-disk-by\x2dlabel-BOOT.device... | |
| [ 10.217608@2] systemd[1]: Starting Root Slice. | |
| [ 10.232779@2] systemd[1]: Created slice Root Slice. | |
| [ 10.240208@2] systemd[1]: Starting Delayed Shutdown Socket. | |
| [ 10.255505@2] systemd[1]: Listening on Delayed Shutdown Socket. | |
| [ 10.263220@2] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. | |
| [ 10.279678@2] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
| [ 10.288628@2] systemd[1]: Starting Journal Socket (/dev/log). | |
| [ 10.304072@2] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ 10.311947@2] systemd[1]: Starting User and Session Slice. | |
| [ 10.327367@2] systemd[1]: Created slice User and Session Slice. | |
| [ 10.335131@2] systemd[1]: Starting udev Control Socket. | |
| [ 10.350397@2] systemd[1]: Listening on udev Control Socket. | |
| [ 10.357801@2] systemd[1]: Starting udev Kernel Socket. | |
| [ 10.372847@2] systemd[1]: Listening on udev Kernel Socket. | |
| [ 10.380266@2] systemd[1]: Starting Journal Socket. | |
| [ 10.395262@2] systemd[1]: Listening on Journal Socket. | |
| [ 10.402642@2] systemd[1]: Starting System Slice. | |
| [ 10.417454@2] systemd[1]: Created slice System Slice. | |
| [ 10.424679@2] systemd[1]: Starting system-systemd\x2dfsck.slice. | |
| [ 10.439987@2] systemd[1]: Created slice system-systemd\x2dfsck.slice. | |
| [ 10.447985@2] systemd[1]: Starting Increase datagram queue length... | |
| [ 10.464828@2] systemd[1]: Starting Restore / save the current clock... | |
| [ 10.487259@2] systemd[1]: Mounting Huge Pages File System... | |
| [ 10.503373@2] systemd[1]: Starting Create list of required static device nodes for the current kernel... | |
| [ 10.523879@2] systemd[1]: Mounting Debug File System... | |
| [ 10.540272@2] systemd[1]: Starting udev Coldplug all Devices... | |
| [ 10.557065@2] systemd[1]: Mounting POSIX Message Queue File System... | |
| [ 10.581577@1] systemd[1]: Started Set Up Additional Binary Formats. | |
| [ 10.589312@1] systemd[1]: Starting LSB: Set keymap... | |
| [ 10.604828@1] systemd[1]: Starting system-serial\x2dgetty.slice. | |
| [ 10.619837@1] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
| [ 10.627503@1] systemd[1]: Starting system-getty.slice. | |
| [ 10.641744@1] systemd[1]: Created slice system-getty.slice. | |
| [ 10.651035@1] systemd[1]: Starting Load Kernel Modules... | |
| [ 10.666208@1] systemd[1]: Started File System Check on Root Device. | |
| [ 10.673625@1] systemd[1]: Starting Slices. | |
| [ 10.686198@3] fuse init (API version 7.22) | |
| [ 10.690148@3] Triggered SDIO WiFi power on and bus rescan. | |
| [ 10.690167@3] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Disable! 240 | |
| [ 10.708419@1] systemd[1]: Reached target Slices. | |
| [ 10.723310@1] systemd[1]: Mounted POSIX Message Queue File System. | |
| [ 10.737706@1] systemd[1]: Mounted Debug File System. | |
| [ 10.751485@1] systemd[1]: Mounted Huge Pages File System. | |
| [ 10.766122@1] systemd[1]: Started Increase datagram queue length. | |
| [ 10.781783@1] systemd[1]: Started Restore / save the current clock. | |
| [ 10.797715@1] systemd[1]: Started Create list of required static device nodes for the current kernel. | |
| [ 10.818684@1] systemd[1]: Started LSB: Set keymap. | |
| [ 10.860733@1] systemd[1]: Started udev Coldplug all Devices. | |
| [ 10.881440@1] systemd[1]: Starting Create Static Device Nodes in /dev... | |
| [ 10.898445@1] systemd[1]: Starting Syslog Socket. | |
| [ 10.912912@1] systemd[1]: Listening on Syslog Socket. | |
| [ 10.920072@1] systemd[1]: Starting Journal Service... | |
| [ 10.943151@1] systemd[1]: Started Journal Service. | |
| [ 10.997741@2] systemd-udevd[2168]: starting version 215 | |
| [ 10.998852@3] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240 | |
| [ 11.335736@2] ionvid: info: ionvideo open | |
| [ 11.349760@7] sdio: queuing unknown CIS tuple 0x80 (2 bytes) | |
| [ 11.360536@4] sdio: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 11.371117@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 11.382237@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes) | |
| [ 11.396554@4] aml_audio_i2s_mute_flag: flag=0 | |
| [ 11.404137@4] aml_audio_set_spdif_mute: flag=0 | |
| [ 11.411631@4] aml_snd_card: aml_m8_set_spk: aml_m8_spk_enabled=0 | |
| [ 11.491055@0] sdio: clk 200000000 SDR mode tuning start | |
| [ 11.497414@0] sdio: rx_tuning_result[0] = 10 | |
| [ 11.503707@0] sdio: rx_tuning_result[1] = 10 | |
| [ 11.509845@0] sdio: rx_tuning_result[2] = 10 | |
| [ 11.515870@0] sdio: rx_tuning_result[3] = 10 | |
| [ 11.521627@0] sdio: best_win_start =0, best_win_size =4 | |
| [ 11.527310@0] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 | |
| [ 11.534854@0] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 | |
| [ 11.538820@2] ionvid: info: ionvideo_stop_generating!!!! | |
| [ 11.538834@2] ionvid: info: ionvideo release | |
| [ 11.557203@0] sdio: queuing unknown CIS tuple 0x91 (3 bytes) | |
| [ 11.563091@0] sdio: new ultra high speed SDR104 SDIO card at address 0001 | |
| [ 11.569997@0] sdio: clock 200000000, 4-bit-bus-width | |
| [ 11.576084@6] [sdio_reinit] finish | |
| [ 11.680593@7] EXT4-fs (mmcblk1p2): re-mounted. Opts: commit=600,errors=remount-ro | |
| [ 11.766479@7] aml_nftl_dev: module license 'Proprietary' taints kernel. | |
| [ 11.774517@5] Disabling lock debugging due to kernel taint | |
| [ 11.776476@7] aml-thermal thermal: Frequency table not initialized. Deferring probe... | |
| [ 11.776490@7] platform thermal: Driver aml-thermal requests probe deferral | |
| [ 11.783449@6] BT_RADIO going: on | |
| [ 11.783451@6] BCM_BT: going ON | |
| [ 11.822859@7] cfg80211: Calling CRDA to update world regulatory domain | |
| [ 11.915367@7] dhd_module_init: in | |
| [ 11.921901@7] ======== bcm_wlan_set_plat_data ======== | |
| [ 11.928458@7] host_oob_irq: 100 | |
| [ 11.934956@7] host_oob_irq_flags=0x414 | |
| [ 11.941476@3] dhd_wifi_platform_load: Enter | |
| [ 11.946884@3] Power-up adapter 'DHD generic adapter' | |
| [ 11.952278@3] wifi_platform_set_power = 1 | |
| [ 11.957558@3] ======== PULL WL_REG_ON HIGH! ======== | |
| [ 11.962871@3] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Disable! 240 | |
| [ 12.033738@4] cfg80211: World regulatory domain updated: | |
| [ 12.040238@4] cfg80211: DFS Master region: unset | |
| [ 12.044313@4] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) | |
| [ 12.059663@1] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) | |
| [ 12.067104@1] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm) | |
| [ 12.074695@1] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) | |
| [ 12.082170@1] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) | |
| [ 12.082174@1] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) | |
| [ 12.082176@1] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) | |
| [ 12.082178@1] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) | |
| [ 12.082180@1] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) | |
| [ 12.169720@3] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240 | |
| [ 12.281728@4] systemd-journald[2166]: Received request to flush runtime journal from PID 1 | |
| [ 12.678813@3] wifi_platform_bus_enumerate device present 1 | |
| [ 12.685094@3] ======== Card detection to detect SDIO card! ======== | |
| [ 12.691963@3] sdio_reset_comm(): | |
| [ 12.726367@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes) | |
| [ 12.735180@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 12.743894@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 12.754664@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes) | |
| [ 12.854234@7] sdio: clk 200000000 SDR mode tuning start | |
| [ 12.861741@7] sdio: rx_tuning_result[0] = 10 | |
| [ 12.869185@7] sdio: rx_tuning_result[1] = 10 | |
| [ 12.876512@1] sdio: rx_tuning_result[2] = 10 | |
| [ 12.882597@1] sdio: rx_tuning_result[3] = 10 | |
| [ 12.888308@1] sdio: best_win_start =0, best_win_size =4 | |
| [ 12.893972@1] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 | |
| [ 12.901386@1] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 | |
| [ 12.907546@1] [sdio_reinit] finish | |
| [ 12.913631@5] aml-thermal thermal: Frequency table not initialized. Deferring probe... | |
| [ 12.922926@5] platform thermal: Driver aml-thermal requests probe deferral | |
| [ 12.928872@1] bcmsdh_register: register client driver | |
| [ 12.928953@1] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter | |
| [ 12.929011@1] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter | |
| [ 12.929013@1] bus num (host idx)=0, slot num (rca)=1 | |
| [ 12.929016@1] found adapter info 'DHD generic adapter' | |
| [ 12.929070@1] sdioh_attach: set sd_f2_blocksize 128 | |
| [ 12.929422@1] dhdsdio_probe : no mutex held. set lock | |
| [ 12.929537@1] F1 signature read @0x18000000=0x15264345 | |
| [ 12.932912@1] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2 | |
| [ 12.933588@1] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 | |
| [ 12.933671@1] dhd_conf_set_chiprev: chip=0x4345, chiprev=6 | |
| [ 12.933713@1] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/brcm/config.txt | |
| [ 12.935476@1] CONFIG-ERROR) dhd_conf_read_config: error reading config file: 0 | |
| [ 12.935902@1] wl_create_event_handler(): thread:wl_event_handler:957 started | |
| [ 12.935911@3] tsk Enter, tsk = 0xffffff80015e2940 | |
| [ 12.936055@1] dhd_attach(): thread:dhd_watchdog_thread:958 started | |
| [ 12.936106@1] dhd_attach(): thread:dhd_dpc:959 started | |
| [ 12.936127@2] dhd_dpc_thread: set dpc_cpucore 0 from config.txt | |
| [ 12.936154@1] dhd_attach(): thread:dhd_rxf:95a started | |
| [ 12.936163@1] dhd_deferred_work_init: work queue initialized | |
| [ 12.948393@1] Dongle Host Driver, version 1.201.59.6 (r506368) | |
| [ 12.948393@1] Compiled in drivers/net/wireless/bcmdhd | |
| [ 12.948937@1] Register interface [wlan0] MAC: 44:2c:05:f5:4a:5a | |
| [ 12.948937@1] | |
| [ 12.948943@1] dhd_prot_ioctl : bus is down. we have nothing to do | |
| [ 12.948987@1] bcmsdh_oob_intr_unregister: Enter | |
| [ 12.948989@1] bcmsdh_oob_intr_unregister: irq is not registered | |
| [ 12.948995@1] dhd_txglom_enable: enable 0 | |
| [ 12.948998@1] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0 | |
| [ 12.948999@1] dhd_conf_set_txglom_params: txglom_bucket_size=0 | |
| [ 12.949001@1] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=0 | |
| [ 12.949003@1] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0 | |
| [ 12.949005@1] dhd_bus_devreset: WLAN OFF DONE | |
| [ 12.949055@1] wifi_platform_set_power = 0 | |
| [ 12.949057@1] ======== PULL WL_REG_ON LOW! ======== | |
| [ 12.949060@1] dhdsdio_probe : the lock is released. | |
| [ 12.949130@1] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter | |
| [ 12.949171@1] dhd_module_init: Exit err=0 | |
| [ 12.982542@7] Bluetooth: Core ver 2.18 | |
| [ 12.982591@7] NET: Registered protocol family 31 | |
| [ 12.982593@7] Bluetooth: HCI device and connection manager initialized | |
| [ 12.982625@7] Bluetooth: HCI socket layer initialized | |
| [ 12.982631@7] Bluetooth: L2CAP socket layer initialized | |
| [ 12.982661@7] Bluetooth: SCO socket layer initialized | |
| [ 12.985061@6] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 | |
| [ 13.258590@2] aml-thermal thermal: Frequency table not initialized. Deferring probe... | |
| [ 13.258604@2] platform thermal: Driver aml-thermal requests probe deferral | |
| [ 13.565753@0] aml_audio_i2s_mute_flag: flag=0 | |
| [ 13.565766@0] aml_audio_set_spdif_mute: flag=0 | |
| [ 13.565777@0] aml_snd_card: aml_m8_set_spk: aml_m8_spk_enabled=0 | |
| [ 13.692520@0] vout_serve: vmode set to 720p60hz | |
| [ 13.692520@0] | |
| [ 13.703797@0] fb: current vmode=1080p60hz | |
| [ 13.709100@0] tv_vout: tv_set_current_vmode[759]fps_target_mode=10 | |
| [ 13.714909@0] tv_vout: mode is 10,sync_duration_den=1,sync_duration_num=60 | |
| [ 13.721812@0] tv_vout: TV mode 720p60hz selected. | |
| [ 13.727138@0] | |
| [ 13.727138@0] vdac_enable: on:0,module_sel:8 | |
| [ 13.737893@0] | |
| [ 13.737893@0] vdac_enable: on:0,module_sel:8 | |
| [ 13.748530@0] tv_vout: new mode =720p60hz set ok | |
| [ 13.753794@0] vout_serve: vinfo mode is: 720p60hz | |
| [ 13.759006@0] vout_serve: new mode 720p60hz | |
| [ 13.759006@0] set ok | |
| [ 13.770025@0] hdmitx: video: get current mode: 720p60hz | |
| [ 13.775168@0] hdmitx: update rx hdr info 0 | |
| [ 13.780333@0] hdmitx: get ext_name (null) | |
| [ 13.785462@0] hdmitx: system: already init VIC = 0 Now VIC = 4 | |
| [ 13.790852@0] hdmitx: rx edid only support RGB format | |
| [ 13.795967@0] hdmitx: rx no SCDC present indicator | |
| [ 13.803155@0] hdmitx: ddc rd8b error 0x54 0x01 | |
| [ 13.810251@0] hdmitx: ddc rd8b error 0x54 0x01 | |
| [ 13.815251@0] hdmirx version is 1.4 or below | |
| [ 13.820266@0] hdmitx div40: 0 | |
| [ 13.848847@0] hdmitx: system: set mode VIC 4 (cd0,cs0,pm1,vd0,1) | |
| [ 13.854235@0] hdmitx: system: set pll | |
| [ 13.861206@0] hdmitx: ddc w1b error 0x54 0x20 0x00 | |
| [ 13.868205@0] hdmitx: ddc w1b error 0x54 0x20 0x00 | |
| [ 13.875140@0] hdmitx: ddc rd8b error 0x54 0x21 | |
| [ 13.880145@0] hdmitx: system: param->VIC:4 | |
| [ 13.884995@0] hdmitx: set clk: VIC = 4 cd = 4 | |
| [ 13.889889@0] config HPLL = 2970000 | |
| [ 13.894712@0] HPLL: 0xc000027b | |
| [ 13.899496@0] config HPLL done | |
| [ 13.904281@0] set_hpll_od3_clk_div[441] div = 6 | |
| [ 13.908925@0] j = 2 vid_clk_div = 1 | |
| [ 13.913352@0] hdmitx: set enc for VIC: 4 | |
| [ 13.917819@0] hdmitx_set_hw[4867] set VIC = 4 | |
| [ 13.922352@0] HDMITX-DWC addr=0x10004006 rd_data=0x40 | |
| [ 13.926678@0] Error: HDMITX-DWC exp_data=0xff mask=0x9f | |
| [ 14.060862@0] hdmitx: system: phy setting done | |
| [ 14.069343@0] Sink is DVI device | |
| [ 14.073798@0] hdmitx: system: packet: can't get vendor data | |
| [ 14.078268@0] hdmtix: set audio | |
| [ 14.082742@0] hdmitx tx_aud_src = 0 | |
| [ 14.087272@0] hdmitx: fs = 3, cd = 4, tmds_clk = 74250 | |
| [ 14.091845@0] hdmitx: system: irq 80000001 | |
| [ 14.096451@0] hdmitx aud_n_para = 6144 | |
| [ 14.101011@0] Start = 0x10000100 End = 0x100001ff | |
| [ 14.101133@4] hdmitx set channel status | |
| [ 14.101203@4] hdmitx: audio: Audio Type: PCM | |
| [ 14.101210@4] fb: current vmode=720p60hz | |
| [ 14.118832@0] [0x10000103]: 0x00000008 | |
| [ 14.118996@0] [0x10000170]: 0x00000010 | |
| [ 14.119021@0] [0x10000180]: 0x000000ff | |
| [ 14.119024@0] [0x10000181]: 0x000000ff | |
| [ 14.119027@0] [0x10000182]: 0x00000003 | |
| [ 14.119029@0] [0x10000183]: 0x00000007 | |
| [ 14.119032@0] [0x10000184]: 0x0000003f | |
| [ 14.119035@0] [0x10000185]: 0x00000002 | |
| [ 14.119040@0] [0x10000187]: 0x000000ff | |
| [ 14.119043@0] [0x10000188]: 0x00000003 | |
| [ 14.186206@0] fb: osd[0] canvas.idx =0x40 | |
| [ 14.186208@0] fb: osd[0] canvas.addr=0x79300000 | |
| [ 14.186211@0] fb: osd[0] canvas.width=3840 | |
| [ 14.186213@0] fb: osd[0] canvas.height=1440 | |
| [ 14.186214@0] fb: osd[0] frame.width=1280 | |
| [ 14.186216@0] fb: osd[0] frame.height=720 | |
| [ 14.248736@1] fb: use ion buffer for fb memory | |
| [ 14.248873@1] meson-fb meson-fb.16: create ion_client ffffffc06532c600, handle=ffffffc0631e7900 | |
| [ 14.248885@1] meson-fb meson-fb.16: ion memory(1): created fb at 0x000000007ab51000, size 1 MiB | |
| [ 14.248899@1] fb: Frame buffer memory assigned at | |
| [ 14.248900@1] fb: 1, phy: 0x000000007ab51000, vir:0xffffff8003b89000, size=1024K | |
| [ 14.248900@1] | |
| [ 14.248906@1] fb: fb1 open, logo index:1 | |
| [ 14.287576@1] fb: osd[1] canvas.idx =0x43 | |
| [ 14.287579@1] fb: osd[1] canvas.addr=0x7ab51000 | |
| [ 14.287582@1] fb: osd[1] canvas.width=128 | |
| [ 14.287583@1] fb: osd[1] canvas.height=32 | |
| [ 14.287585@1] fb: osd[1] frame.width=32 | |
| [ 14.287586@1] fb: osd[1] frame.height=32 | |
| [ 14.321457@6] vout_serve: vmode set to 720p60hz | |
| [ 14.321457@6] | |
| [ 14.328114@6] vout_serve: don't set the same mode as current | |
| [ 14.328264@6] fb: osd0 free scale DISABLE | |
| [ 14.337696@6] fb: osd[0] enable: 1 (amlogics905x_in) | |
| [ 14.958127@2] dhd_open: Enter ffffffc063321000 | |
| [ 14.961635@2] | |
| [ 14.961635@2] Dongle Host Driver, version 1.201.59.6 (r506368) | |
| [ 14.961635@2] Compiled in drivers/net/wireless/bcmdhd | |
| [ 14.978562@2] wl_android_wifi_on in 1 | |
| [ 14.982218@2] wl_android_wifi_on in 2: g_wifi_on=0 | |
| [ 14.986884@2] wifi_platform_set_power = 1 | |
| [ 14.990893@2] ======== PULL WL_REG_ON HIGH! ======== | |
| [ 14.995787@2] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Disable! 240 | |
| [ 15.202860@2] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240 | |
| [ 15.708805@2] sdio_reset_comm(): | |
| [ 15.740677@5] sdio: queuing unknown CIS tuple 0x80 (2 bytes) | |
| [ 15.848401@5] sdio: clk 200000000 SDR mode tuning start | |
| [ 15.853142@7] sdio: rx_tuning_result[0] = 10 | |
| [ 15.857805@7] sdio: rx_tuning_result[1] = 10 | |
| [ 15.862633@7] sdio: rx_tuning_result[2] = 10 | |
| [ 15.867131@7] sdio: rx_tuning_result[3] = 10 | |
| [ 15.871369@2] sdio: best_win_start =0, best_win_size =4 | |
| [ 15.875074@2] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 | |
| [ 15.882444@2] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 | |
| [ 15.888600@2] sdioh_start: set sd_f2_blocksize 128 | |
| [ 15.893710@2] | |
| [ 15.893710@2] | |
| [ 15.893710@2] dhd_bus_devreset: == WLAN ON == | |
| [ 15.906185@2] F1 signature read @0x18000000=0x15264345 | |
| [ 15.914997@2] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2 | |
| [ 15.920377@2] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 | |
| [ 15.926921@2] CONFIG-ERROR) dhd_conf_read_config: error reading config file: 0 | |
| [ 15.933730@2] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 15.942552@2] dhdsdio_download_firmware: set use_rxchain 0 | |
| [ 15.947952@2] dhdsdio_download_firmware: set txglomsize 40 | |
| [ 15.953400@2] sdioh_set_mode: set txglom_mode to multi-desc | |
| [ 15.958920@2] Final fw_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 15.965115@2] Final nv_path=/lib/firmware/brcm/ | |
| [ 15.969626@2] Final conf_path=/lib/firmware/brcm/config.txt | |
| [ 15.975713@2] _dhdsdio_download_firmware: dongle image file download failed | |
| [ 15.982078@2] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 15.987372@2] dhd_prot_ioctl : bus is down. we have nothing to do | |
| [ 15.994926@2] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 15.999196@2] wifi_platform_set_power = 0 | |
| [ 16.003216@2] ======== PULL WL_REG_ON LOW! ======== | |
| [ 16.007552@2] wl_android_wifi_on: Failed | |
| [ 16.011469@2] dhd_open : wl_android_wifi_on failed (-35) | |
| [ 16.016697@2] dhd_stop: Enter ffffffc063321000 | |
| [ 16.021114@2] wl_android_wifi_off in 1 | |
| [ 16.025488@2] wl_android_wifi_off in 2: g_wifi_on=0 | |
| [ 16.029888@2] wl_android_wifi_off out | |
| [ 16.034161@2] dhd_stop: Exit | |
| [ 16.038380@2] dhd_open: Exit ret=-1 | |
| [ [ 16.173584@6] | |
| [ 16.173584@6] Dongle Host Driver, version 1.201.59.6 (r506368) | |
| [ 16.173584@6] Compiled in drivers/net/wireless/bcmdhd | |
| [ 16.173661@4] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 | |
| [ 16.202218@6] wl_android_wifi_on in 1 | |
| [ 16.207033@6] wl_android_wifi_on in 2: g_wifi_on=0 | |
| [ 16.207037@6] wifi_platform_set_power = 1 | |
| [ 16.207039@6] ======== PULL WL_REG_ON HIGH! ======== | |
| [ 16.207064@6] [ 16.227492@7] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 | |
| [ 16.254188@5] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 | |
| [ 16.254373@5] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200 | |
| [ 16.407113@0] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240 | |
| [ 16.918815@0] sdio_reset_comm(): | |
| [ 16.951211@4] sdio_read_cis: 3 callbacks suppressed | |
| [ 16.956274@4] sdio: queuing unknown CIS tuple 0x80 (2 bytes) | |
| [ 16.964004@4] sdio: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 16.971617@4] sdio: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 16.981295@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes) | |
| [ 17.079133@7] sdio: clk 200000000 SDR mode tuning start | |
| [ 17.084329@7] sdio: rx_tuning_result[0] = 10 | |
| [ 17.089323@7] sdio: rx_tuning_result[1] = 10 | |
| [ 17.094179@7] sdio: rx_tuning_result[2] = 10 | |
| [ 17.098982@1] sdio: rx_tuning_result[3] = 10 | |
| [ 17.102702@1] sdio: best_win_start =0, best_win_size =4 | |
| [ 17.106679@1] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 | |
| [ 17.114046@1] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 | |
| [ 17.120231@1] sdioh_start: set sd_f2_blocksize 128 | |
| [ 17.125271@1] | |
| [ 17.125271@1] | |
| [ 17.125271@1] dhd_bus_devreset: == WLAN ON == | |
| [ 17.139687@1] F1 signature read @0x18000000=0x15264345 | |
| [ 17.148135@1] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2 | |
| [ 17.153712@1] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 | |
| [ 17.160316@1] CONFIG-ERROR) dhd_conf_read_config: error reading config file: 0 | |
| [ 17.167150@1] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 17.175930@1] dhdsdio_download_firmware: set use_rxchain 0 | |
| [ 17.181353@1] dhdsdio_download_firmware: set txglomsize 40 | |
| [ 17.186761@1] sdioh_set_mode: set txglom_mode to multi-desc | |
| [ 17.192305@1] Final fw_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 17.198491@1] Final nv_path=/lib/firmware/brcm/ | |
| [ 17.203172@1] Final conf_path=/lib/firmware/brcm/config.txt | |
| [ 17.209042@1] _dhdsdio_download_firmware: dongle image file download failed | |
| [ 17.215430@1] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 17.220778@1] dhd_prot_ioctl : bus is down. we have nothing to do | |
| [ 17.226782@1] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 17.232211@1] wifi_platform_set_power = 0 | |
| [ 17.236254@1] ======== PULL WL_REG_ON LOW! ======== | |
| [ 17.240952@1] wl_android_wifi_on: Failed | |
| [ 17.245647@1] dhd_open : wl_android_wifi_on failed (-35) | |
| [ 17.250370@1] dhd_stop: Enter ffffffc063321000 | |
| [ 17.254468@1] wl_android_wifi_off in 1 | |
| [ 17.258434@1] wl_android_wifi_off in 2: g_wifi_on=0 | |
| [ 17.263289@1] wl_android_wifi_off out | |
| [ 17.266967@1] dhd_stop: Exit | |
| [ 17.270685@1] dhd_open: Exit ret=-1 | |
| [ 17.275008@1] dhd_open: Enter ffffffc063321000 | |
| [ 17.278550@1] | |
| [ 17.278550@1] Dongle Host Driver, version 1.201.59.6 (r506368) | |
| [ 17.278550@1] Compiled in drivers/net/wireless/bcmdhd | |
| [ 17.295521@1] wl_android_wifi_on in 1 | |
| [ 17.299126@1] wl_android_wifi_on in 2: g_wifi_on=0 | |
| [ 17.303837@1] wifi_platform_set_power = 1 | |
| Debian GNU/Lin[ 17.307804@1] ======== PULL WL_REG_ON HIGH! ======== | |
| ux 8 amlogic-s905x ttyS0 | |
| [ 17.313985@1] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Disable! 240 | |
| amlogic-s905x login: [ 17.523289@1] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240 | |
| [ 18.028809@2] sdio_reset_comm(): | |
| [ 18.060705@7] sdio: queuing unknown CIS tuple 0x80 (2 bytes) | |
| [ 18.067903@7] sdio: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 18.075059@7] sdio: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 18.084214@7] sdio: queuing unknown CIS tuple 0x80 (7 bytes) | |
| [ 18.182043@7] sdio: clk 200000000 SDR mode tuning start | |
| [ 18.186514@7] sdio: rx_tuning_result[0] = 10 | |
| [ 18.190985@7] sdio: rx_tuning_result[1] = 10 | |
| [ 18.195449@7] sdio: rx_tuning_result[2] = 10 | |
| [ 18.199889@4] sdio: rx_tuning_result[3] = 10 | |
| [ 18.204021@2] sdio: best_win_start =0, best_win_size =4 | |
| [ 18.207910@2] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 | |
| [ 18.215271@2] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 | |
| [ 18.221460@2] sdioh_start: set sd_f2_blocksize 128 | |
| [ 18.226519@2] | |
| [ 18.226519@2] | |
| [ 18.226519@2] dhd_bus_devreset: == WLAN ON == | |
| [ 18.238152@2] F1 signature read @0x18000000=0x15264345 | |
| [ 18.246658@2] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2 | |
| [ 18.251629@2] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 | |
| [ 18.258165@2] CONFIG-ERROR) dhd_conf_read_config: error reading config file: 0 | |
| [ 18.264972@2] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 18.273783@2] dhdsdio_download_firmware: set use_rxchain 0 | |
| [ 18.279224@2] dhdsdio_download_firmware: set txglomsize 40 | |
| [ 18.284628@2] sdioh_set_mode: set txglom_mode to multi-desc | |
| [ 18.290161@2] Final fw_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 18.296358@2] Final nv_path=/lib/firmware/brcm/ | |
| [ 18.300855@2] Final conf_path=/lib/firmware/brcm/config.txt | |
| [ 18.306886@2] _dhdsdio_download_firmware: dongle image file download failed | |
| [ 18.313326@2] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 18.318615@2] dhd_prot_ioctl : bus is down. we have nothing to do | |
| [ 18.324669@2] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 18.330074@2] wifi_platform_set_power = 0 | |
| [ 18.333963@2] ======== PULL WL_REG_ON LOW! ======== | |
| [ 18.338820@2] wl_android_wifi_on: Failed | |
| [ 18.342676@2] dhd_open : wl_android_wifi_on failed (-35) | |
| [ 18.347938@2] dhd_stop: Enter ffffffc063321000 | |
| [ 18.352348@2] wl_android_wifi_off in 1 | |
| [ 18.356044@2] wl_android_wifi_off in 2: g_wifi_on=0 | |
| [ 18.360885@2] wl_android_wifi_off out | |
| [ 18.364496@2] dhd_stop: Exit | |
| [ 18.368527@2] dhd_open: Exit ret=-1 | |
| [ 18.381167@2] dhd_open: Enter ffffffc063321000 | |
| [ 18.384629@2] | |
| [ 18.384629@2] Dongle Host Driver, version 1.201.59.6 (r506368) | |
| [ 18.384629@2] Compiled in drivers/net/wireless/bcmdhd | |
| [ 18.401639@2] wl_android_wifi_on in 1 | |
| [ 18.405207@2] wl_android_wifi_on in 2: g_wifi_on=0 | |
| [ 18.409967@2] wifi_platform_set_power = 1 | |
| [ 18.413919@2] ======== PULL WL_REG_ON HIGH! ======== | |
| [ 18.418879@2] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Disable! 240 | |
| [ 18.625754@2] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240 | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: [ 19.138804@2] sdio_reset_comm(): | |
| [ 19.170685@5] sdio: queuing unknown CIS tuple 0x80 (2 bytes) | |
| [ 19.177882@5] sdio: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 19.283316@5] sdio: clk 200000000 SDR mode tuning start | |
| [ 19.288021@5] sdio: rx_tuning_result[0] = 10 | |
| [ 19.292666@5] sdio: rx_tuning_result[1] = 10 | |
| [ 19.297182@5] sdio: rx_tuning_result[2] = 10 | |
| [ 19.301651@5] sdio: rx_tuning_result[3] = 10 | |
| [ 19.305912@3] sdio: best_win_start =0, best_win_size =4 | |
| [ 19.309937@3] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 | |
| [ 19.317242@3] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 | |
| [ 19.323452@3] sdioh_start: set sd_f2_blocksize 128 | |
| [ 19.328513@3] | |
| [ 19.328513@3] | |
| [ 19.328513@3] dhd_bus_devreset: == WLAN ON == | |
| [ 19.340655@3] F1 signature read @0x18000000=0x15264345 | |
| [ 19.349151@3] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2 | |
| [ 19.354120@3] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 | |
| [ 19.360807@3] CONFIG-ERROR) bian GNU/Linux 8 amlogic-s905x tdhd_conf_read_config: error reading config file: 0 | |
| tyS0 | |
| [ 19.370359@3] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 19.379839@3] dhdsdio_download_firmware: set use_rxchain 0 | |
| [ 19.385256@3] dhdsdio_download_firmware: set txglomsize 40 | |
| [ 19.390703@3] sdioh_set_mode: set txglom_mode to multi-desc | |
| [ 19.396210@3] Final fw_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 19.402432@3] Final nv_path=/lib/firmware/brcm/ | |
| [ 19.406905@3] Final conf_path=/lib/firmware/brcm/config.txt | |
| [ 19.412979@3] _dhdsdio_download_firmware: dongle image file download failed | |
| [ 19.419375@3] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 19.424676@3] dhd_prot_ioctl : bus is down. we have nothing to do | |
| amlogic-s905x login: [ 19.430725@3] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 19.437931@3] wifi_platform_set_power = 0 | |
| [ 19.441851@3] ======== PULL WL_REG_ON LOW! ======== | |
| [ 19.446666@3] wl_android_wifi_on: Failed | |
| [ 19.450564@3] dhd_open : wl_android_wifi_on failed (-35) | |
| [ 19.455812@3] dhd_stop: Enter ffffffc063321000 | |
| [ 19.460222@3] wl_android_wifi_off in 1 | |
| [ 19.463917@3] wl_android_wifi_off in 2: g_wifi_on=0 | |
| [ 19.468745@3] wl_android_wifi_off out | |
| [ 19.472393@3] dhd_stop: Exit | |
| [ 19.475952@3] dhd_open: Exit ret=-1 | |
| [ 19.480135@3] dhd_open: Enter ffffffc063321000 | |
| [ 19.483747@3] | |
| [ 19.483747@3] Dongle Host Driver, version 1.201.59.6 (r506368) | |
| [ 19.483747@3] Compiled in drivers/net/wireless/bcmdhd | |
| [ 19.501149@3] wl_android_wifi_on in 1 | |
| [ 19.504739@3] wl_android_wifi_on in 2: g_wifi_on=0 | |
| [ 19.509499@3] wifi_platform_set_power = 1 | |
| [ 19.513450@3] ======== PULL WL_REG_ON HIGH! ======== | |
| [ 19.518385@3] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Disable! 240 | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: [ 19.725307@3] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240 | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: [ 20.238805@3] sdio_reset_comm(): | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: [ 20.374183@6] sdio: clk 200000000 SDR mode tuning start | |
| [ 20.379082@4] sdio: rx_tuning_result[0] = 10 | |
| [ 20.383877@4] sdio: rx_tuning_result[1] = 10 | |
| [ 20.388510@4] sdio: rx_tuning_result[2] = 10 | |
| [ 20.393035@4] sdio: rx_tuning_result[3] = 10 | |
| [ 20.397266@0] sdio: best_win_start =0, best_win_size =4 | |
| [ 20.401073@0] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 | |
| [ 20.408360@0] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 | |
| [ 20.414572@0] sdioh_start: set sd_f2_blocksize 128 | |
| [ 20.419691@0] | |
| [ 20.419691@0] | |
| [ 20.419691@0] dhd_bus_devreset: == WLAN ON == | |
| [ 20.432404@0] F1 signature read @0x18000000=0x15264345 | |
| [ 20.441149@0] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2 | |
| [ 20.446229@0] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 | |
| [ 20.452883@0] CONFIG-ERROR) dhd_conf_read_config: error reading config file: 0 | |
| [ 20.459640@0] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 20.468442@0] dhdsdio_download_firmware: set use_rxchain 0 | |
| [ 20.473860@0] dhdsdio_download_firmware: set txglomsize 40 | |
| [ 20.479295@0] sdioh_set_mode: set txglom_mode to multi-desc | |
| [ 20.484822@0] Final fw_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 20.491028@0] Final nv_path=/lib/firmware/brcm/ | |
| Debian GNU/Linu[ 20.4954x94@0] Final conf_path=/lib/firmware/brcm/config.txt | |
| [ 20.503080@0] _dhdsdio_download_firmware: dongle image file download failed | |
| [ 20.509435@0] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 20.514732@0] dhd_prot_ioctl : bus is down. we have nothing to do | |
| [ 20.520814@0] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 20.526181@0] wifi_platform_set_power = 0 | |
| [ 20.530098@0] ======== PULL WL_REG_ON LOW! ======== | |
| [ 20.534935@0] wl_android_wifi_on: Failed | |
| [ 20.538806@0] dhd_open : wl_android_wifi_on failed (-35) | |
| [ 20.544057@0] dhd_stop: Enter ffffffc063321000 | |
| [ 20.548451@0] wl_android_wifi_off in 1 | |
| [ 20.552196@0] wl_android_wifi_off in 2: g_wifi_on=0 | |
| [ 20.557014@0] wl_android_wifi_off out | |
| [ 20.560702@0] dhd_stop: Exit | |
| 8 amlogic-[ 20.564337@0] dhd_open: Exit ret=-1 | |
| s905x ttyS0 | |
| [ 20.571060@0] dhd_open: Enter ffffffc063321000 | |
| [ 20.574700@0] | |
| [ 20.574700@0] Dongle Host Driver, version 1.201.59.6 (r506368) | |
| [ 20.574700@0] Compiled in drivers/net/wireless/bcmdhd | |
| [ 20.592363@0] wl_android_wifi_on in 1 | |
| [ 20.595939@0] wl_android_wifi_on in 2: g_wifi_on=0 | |
| [ 20.600713@0] wifi_platform_set_power = 1 | |
| [ 20.604618@0] ======== PULL WL_REG_ON HIGH! ======== | |
| [ 20.609582@0] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Disable! 240 | |
| amlogic-s905x login: | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: [ 20.816477@0] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240 | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: [ 21.328811@0] sdio_reset_comm(): | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: [ 21.463786@4] sdio: clk 200000000 SDR mode tuning start | |
| [ 21.468618@4] sdio: rx_tuning_result[0] = 10 | |
| [ 21.473416@4] sdio: rx_tuning_result[1] = 10 | |
| [ 21.478090@4] sdio: rx_tuning_result[2] = 10 | |
| [ 21.482635@4] sdio: rx_tuning_result[3] = 10 | |
| [ 21.486874@1] sdio: best_win_start =0, best_win_size =4 | |
| [ 21.490650@1] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 | |
| [ 21.497945@1] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 | |
| [ 21.504161@1] sdioh_start: set sd_f2_blocksize 128 | |
| [ 21.509246@1] | |
| [ 21.509246@1] | |
| [ 21.509246@1] dhd_bus_devreset: == WLAN ON == | |
| [ 21.521954@1] F1 signature read @0x18000000=0x15264345 | |
| [ 21.530449@1] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2 | |
| [ 21.535531@1] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 | |
| [ 21.542177@1] CONFIG-ERROR) dhd_conf_read_config: error reading config file: 0 | |
| [ 21.548984@1] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 21.557750@1] dhdsdio_download_firmware: set use_rxchain 0 | |
| [ 21.563207@1] dhdsdio_download_firmware: set txglomsize 40 | |
| [ 21.568615@1] sdioh_set_mode: set txglom_mode to multi-desc | |
| [ 21.574418@1] Final fw_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 21.580629@1] Final nv_path=/lib/firmware/brcm/ | |
| [ 21.585087@1] Final conf_path=/lib/firmware/brcm/config.txt | |
| [ 21.591148@1] _dhdsdio_download_firmware: dongle image file download failed | |
| [ 21.597541@1] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 21.602890@1] dhd_prot_ioctl : bus is down. we have nothing to do | |
| [ 21.608920@1] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 21.614302@1] wifi_platform_set_power = 0 | |
| [ 21.618208@1] ======== PULL WL_REG_ON LOW! ======== | |
| [ 21.623066@1] wl_android_wifi_on: Failed | |
| [ 21.626921@1] dhd_open : wl_android_wifi_on failed (-35) | |
| [ 21.632209@1] dhd_stop: Enter ffffffc063321000 | |
| Debian GNU/Linux 8 amlogic-s[ 21.636580@1] wl_android_wifi_off in 1 | |
| 905x ttyS0 | |
| [ 21.642729@1] wl_android_wifi_off in 2: g_wifi_on=0 | |
| [ 21.648740@1] wl_android_wifi_off out | |
| [ 21.652432@1] dhd_stop: Exit | |
| [ 21.656054@1] dhd_open: Exit ret=-1 | |
| [ 21.660262@1] dhd_open: Enter ffffffc063321000 | |
| amlogic-s905x login: [ 21.663893@1] | |
| [ 21.663893@1] Dongle Host Driver, version 1.201.59.6 (r506368) | |
| [ 21.663893@1] Compiled in drivers/net/wireless/bcmdhd | |
| [ 21.681533@1] wl_android_wifi_on in 1 | |
| [ 21.685101@1] wl_android_wifi_on in 2: g_wifi_on=0 | |
| [ 21.689870@1] wifi_platform_set_power = 1 | |
| [ 21.693807@1] ======== PULL WL_REG_ON HIGH! ======== | |
| [ 21.698743@1] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Disable! 240 | |
| Debian GNU/Linux 8 amlogic-s905x ttyS0 | |
| amlogic-s905x login: [ 21.905682@1] aml_wifi wifi.33: [extern_wifi_set_enable] WIFI Enable! 240 | |
| [ 22.418814@1] sdio_reset_comm(): | |
| [ 22.450658@4] sdio_read_cis: 10 callbacks suppressed | |
| [ 22.455214@4] sdio: queuing unknown CIS tuple 0x80 (2 bytes) | |
| [ 22.462779@4] sdio: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 22.469894@7] sdio: queuing unknown CIS tuple 0x80 (3 bytes) | |
| [ 22.479001@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes) | |
| [ 22.576194@5] sdio: clk 200000000 SDR mode tuning start | |
| [ 22.580738@7] sdio: rx_tuning_result[0] = 10 | |
| [ 22.585292@7] sdio: rx_tuning_result[1] = 10 | |
| [ 22.589797@7] sdio: rx_tuning_result[2] = 10 | |
| [ 22.594222@7] sdio: rx_tuning_result[3] = 10 | |
| [ 22.598320@3] sdio: best_win_start =0, best_win_size =4 | |
| [ 22.602126@3] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x22000 | |
| [ 22.609435@3] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x22000 | |
| [ 22.615605@3] sdioh_start: set sd_f2_blocksize 128 | |
| [ 22.620718@3] | |
| [ 22.620718@3] | |
| [ 22.620718@3] dhd_bus_devreset: == WLAN ON == | |
| [ 22.632359@3] F1 signature read @0x18000000=0x15264345 | |
| [ 22.640975@3] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2 | |
| [ 22.645903@3] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000 | |
| [ 22.652533@3] CONFIG-ERROR) dhd_conf_read_config: error reading config file: 0 | |
| [ 22.659330@3] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 22.668106@3] dhdsdio_download_firmware: set use_rxchain 0 | |
| [ 22.673551@3] dhdsdio_download_firmware: set txglomsize 40 | |
| [ 22.678985@3] sdioh_set_mode: set txglom_mode to multi-desc | |
| [ 22.684491@3] Final fw_path=/lib/firmware/brcm/fw_bcm43455c0_ag.bin | |
| [ 22.690713@3] Final nv_path=/lib/firmware/brcm/ | |
| [ 22.695186@3] Final conf_path=/lib/firmware/brcm/config.txt | |
| [ 22.701253@3] _dhdsdio_download_firmware: dongle image file download failed | |
| [ 22.707639@3] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 22.712975@3] dhd_prot_ioctl : bus is down. we have nothing to do | |
| [ 22.719007@3] dhd_net_bus_devreset: dhd_bus_devreset: -35 | |
| [ 22.724399@3] wifi_platform_set_power = 0 | |
| [ 22.728306@3] ======== PULL WL_REG_ON LOW! ======== | |
| [ 22.733150@3] wl_android_wifi_on: Failed | |
| [ 22.737296@3] dhd_open : wl_android_wifi_on failed (-35) | |
| [ 22.742294@3] dhd_stop: Enter ffffffc063321000 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Just curious: have you gotten Armbian to work on the GT1?