Skip to content

Instantly share code, notes, and snippets.

@DieterReuter

DieterReuter/rpi3-uart-boot.log

Created July 14, 2019 11:38
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save DieterReuter/923527e05ef009383a78118c74c503b8 to your computer and use it in GitHub Desktop.
Save DieterReuter/923527e05ef009383a78118c74c503b8 to your computer and use it in GitHub Desktop.
Download ZIP
HypriotOS/arm64, first boot log of new build hypriotos-rpi64-v20190713-213238.img.zip
Raw
rpi3-uart-boot.log
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 4.19.58-hypriotos-v8 (root@1036600b04ac) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #1 SMP PREEMPT Sat Jul 13 15:08:03 UTC 2019
[ 0.000000] Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 8 MiB at 0x000000003dc00000
[ 0.000000] random: get_random_bytes called from start_kernel+0xb4/0x480 with crng_init=0
[ 0.000000] percpu: Embedded 24 pages/cpu s57496 r8192 d32616 u98304
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 843419
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 251496
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 cgroup_enable=cpuset cgroup_enable=memory swapaccount=1 elevator=deadline fsck.repair=yes rootwait console=ttyS0,115200 net.ifnames=0
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Memory: 980480K/1021952K available (7740K kernel code, 886K rwdata, 2404K rodata, 2752K init, 924K bss, 33280K reserved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 26732 entries in 105 pages
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000265] Console: colour dummy device 80x25
[ 0.000966] console [tty1] enabled
[ 0.001038] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200)
[ 0.001096] pid_max: default: 32768 minimum: 301
[ 0.001514] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001571] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.009163] ASID allocator initialised with 32768 entries
[ 0.011160] rcu: Hierarchical SRCU implementation.
[ 0.013705] EFI services will not be available.
[ 0.016252] smp: Bringing up secondary CPUs ...
[ 0.024503] Detected VIPT I-cache on CPU1
[ 0.024572] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.032631] Detected VIPT I-cache on CPU2
[ 0.032679] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.040787] Detected VIPT I-cache on CPU3
[ 0.040833] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.041040] smp: Brought up 1 node, 4 CPUs
[ 0.041191] SMP: Total of 4 processors activated.
[ 0.041225] CPU features: detected: 32-bit EL0 Support
[ 0.044182] CPU: All CPU(s) started at EL2
[ 0.044257] alternatives: patching kernel code
[ 0.046171] devtmpfs: initialized
[ 0.062662] Enabled cp15_barrier support
[ 0.062725] Enabled setend support
[ 0.063336] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.063398] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.064172] pinctrl core: initialized pinctrl subsystem
[ 0.064537] DMI not present or invalid.
[ 0.065003] NET: Registered protocol family 16
[ 0.071418] cpuidle: using governor menu
[ 0.072104] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[ 0.072151] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.077715] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.077894] Serial: AMBA PL011 UART driver
[ 0.082443] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.123565] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.125187] bcm2835-dma 3f007000.dma: DMA legacy API manager at (____ptrval____), dmachans=0x1
[ 0.127613] SCSI subsystem initialized
[ 0.127931] usbcore: registered new interface driver usbfs
[ 0.128027] usbcore: registered new interface driver hub
[ 0.128207] usbcore: registered new device driver usb
[ 0.130570] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-07-09 14:41, variant start_cd
[ 0.131584] raspberrypi-firmware soc:firmware: Firmware hash is 6c3fe3f096a93de3b34252ad98cdccadeb534be2
[ 0.134657] clocksource: Switched to clocksource arch_sys_counter
[ 0.257395] VFS: Disk quotas dquot_6.6.0
[ 0.257540] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.257815] FS-Cache: Loaded
[ 0.258295] CacheFiles: Loaded
[ 0.271633] NET: Registered protocol family 2
[ 0.272705] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
[ 0.272780] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.272924] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.273151] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.273422] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.273499] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.273906] NET: Registered protocol family 1
[ 0.274875] RPC: Registered named UNIX socket transport module.
[ 0.274912] RPC: Registered udp transport module.
[ 0.274942] RPC: Registered tcp transport module.
[ 0.274971] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.277537] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.279887] Initialise system trusted keyrings
[ 0.280286] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.292684] FS-Cache: Netfs 'nfs' registered for caching
[ 0.293811] NFS: Registering the id_resolver key type
[ 0.293889] Key type id_resolver registered
[ 0.293920] Key type id_legacy registered
[ 0.297865] Key type asymmetric registered
[ 0.297905] Asymmetric key parser 'x509' registered
[ 0.297993] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.298294] io scheduler noop registered
[ 0.298328] io scheduler deadline registered (default)
[ 0.298571] io scheduler cfq registered
[ 0.298604] io scheduler mq-deadline registered (default)
[ 0.298683] io scheduler kyber registered
[ 0.301875] bcm2708_fb soc:fb: FB found 1 display(s)
[ 0.312482] Console: switching to colour frame buffer device 80x30
[ 0.319295] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 640x480
[ 0.325497] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.330084] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.332990] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB)
[ 0.338809] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.344026] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.362538] brd: module loaded
[ 0.380443] loop: module loaded
[ 0.383802] Loading iSCSI transport class v2.0-870.
[ 0.387484] libphy: Fixed MDIO Bus: probed
[ 0.390122] usbcore: registered new interface driver lan78xx
[ 0.392764] usbcore: registered new interface driver smsc95xx
[ 0.395300] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.425823] dwc_otg 3f980000.usb: base=(____ptrval____)
[ 0.629018] Core Release: 2.80a
[ 0.631442] Setting default values for core params
[ 0.633925] Finished setting default values for core params
[ 0.837829] Using Buffer DMA mode
[ 0.840322] Periodic Transfer Interrupt Enhancement - disabled
[ 0.842900] Multiprocessor Interrupt Enhancement - disabled
[ 0.845486] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.848039] Dedicated Tx FIFOs mode
[ 0.851525] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = ffffff8008259000 dma = 0x00000000fdd14000 len=9024
[ 0.856554] FIQ FSM acceleration enabled for :
[ 0.856554] Non-periodic Split Transactions
[ 0.856554] Periodic Split Transactions
[ 0.856554] High-Speed Isochronous Endpoints
[ 0.856554] Interrupt/Control Split Transaction hack enabled
[ 0.868259] WARN::hcd_init_fiq:497: MPHI regs_base at ffffff800804d000
[ 0.870549] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.872849] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.877378] dwc_otg 3f980000.usb: irq 9, io mem 0x00000000
[ 0.879777] Init: Port Power? op_state=1
[ 0.882097] Init: Power Port (0)
[ 0.884843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.889600] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.894525] usb usb1: Product: DWC OTG Controller
[ 0.897060] usb usb1: Manufacturer: Linux 4.19.58-hypriotos-v8 dwc_otg_hcd
[ 0.899670] usb usb1: SerialNumber: 3f980000.usb
[ 0.903016] hub 1-0:1.0: USB hub found
[ 0.905589] hub 1-0:1.0: 1 port detected
[ 0.909756] usbcore: registered new interface driver usb-storage
[ 0.913527] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.916333] bcm2835-cpufreq: min=600000 max=1400000
[ 0.919494] sdhci: Secure Digital Host Controller Interface driver
[ 0.921989] sdhci: Copyright(c) Pierre Ossman
[ 0.925083] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[ 0.928270] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.931144] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
[ 0.933840] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.938414] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.941278] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.944175] usbcore: registered new interface driver usbhid
[ 0.946813] usbhid: USB HID core driver
[ 0.949723] Initializing XFRM netlink socket
[ 0.952329] NET: Registered protocol family 17
[ 0.955087] Key type dns_resolver registered
[ 0.959143] registered taskstats version 1
[ 0.961658] Loading compiled-in X.509 certificates
[ 0.976589] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.979168] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 66, base_baud = 0) is a PL011 rev2
[ 0.986423] console [ttyS0] disabled
[ 0.988908] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550
[ 1.978300] console [ttyS0] enabled
[ 1.986141] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.994819] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 2.032364] sdhost: log_buf @ (____ptrval____) (fdd13000)
[ 2.057140] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.072181] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.081845] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.091841] Indeed it is in host mode hprt0 = 00021501
[ 2.102688] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 2.113169] of_cfs_init
[ 2.117996] of_cfs_init: OK
[ 2.118997] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.131448] Waiting for root device /dev/mmcblk0p2...
[ 2.187673] random: fast init done
[ 2.229525] mmc1: new high speed SDIO card at address 0001
[ 2.272220] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.288799] mmc0: new high speed SDHC card at address aaaa
[ 2.296734] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.306070] Indeed it is in host mode hprt0 = 00001101
[ 2.317344] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[ 2.385204] mmcblk0: p1 p2
[ 2.414503] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.427290] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 2.437708] devtmpfs: mounted
[ 2.451689] Freeing unused kernel memory: 2752K
[ 2.458882] Run /sbin/init as init process
[ 2.509207] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 2.522415] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.533492] hub 1-1:1.0: USB hub found
[ 2.540233] hub 1-1:1.0: 4 ports detected
[ 2.750694] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Modifying partition table
[ 2.831741] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
Welcome to fdisk (util-linux 2.29.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): Disk /dev/mmcblk0: 7.4 GiB, 7948206080 bytes, 15523840 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 2048 133119 131072 64M c W95 FAT32 (LBA)
/dev/mmcblk0p2 133120 2047998 1914879 935M 83 Linux
Command (m for help): Partition number (1,2, default 2):
Partition 2 has been deleted.
Command (m for help): Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p): Partition number (2-4, default 2): First sector (133120-15523839, defau[ 2.931354] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
lt 13312[ 2.945585] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
0): Last sector,[ 2.960199] hub 1-1.1:1.0: USB hub found
+sector[ 2.967815] hub 1-1.1:1.0: 3 ports detected
s or +size{K,M,G,T,P} (133120-15523839, default 15523839):
Created a new partition 2 of type 'Linux' and of size 7.3 GiB.
Partition #2 contains a ext4 signature[ 2.988930] sysrq: SysRq : Resetting
.
[ 2.996013] SMP: stopping secondary CPUs
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 4.19.58-hypriotos-v8 (root@1036600b04ac) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #1 SMP PREEMPT Sat Jul 13 15:08:03 UTC 2019
[ 0.000000] Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 8 MiB at 0x000000003dc00000
[ 0.000000] random: get_random_bytes called from start_kernel+0xb4/0x480 with crng_init=0
[ 0.000000] percpu: Embedded 24 pages/cpu s57496 r8192 d32616 u98304
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 843419
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 251496
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 cgroup_enable=cpuset cgroup_enable=memory swapaccount=1 elevator=deadline fsck.repair=yes rootwait console=ttyS0,115200 net.ifnames=0
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Memory: 980480K/1021952K available (7740K kernel code, 886K rwdata, 2404K rodata, 2752K init, 924K bss, 33280K reserved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 26732 entries in 105 pages
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000265] Console: colour dummy device 80x25
[ 0.000964] console [tty1] enabled
[ 0.001037] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200)
[ 0.001095] pid_max: default: 32768 minimum: 301
[ 0.001512] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001569] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.009171] ASID allocator initialised with 32768 entries
[ 0.011167] rcu: Hierarchical SRCU implementation.
[ 0.013709] EFI services will not be available.
[ 0.016258] smp: Bringing up secondary CPUs ...
[ 0.024510] Detected VIPT I-cache on CPU1
[ 0.024578] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.032635] Detected VIPT I-cache on CPU2
[ 0.032684] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.040796] Detected VIPT I-cache on CPU3
[ 0.040842] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.041050] smp: Brought up 1 node, 4 CPUs
[ 0.041201] SMP: Total of 4 processors activated.
[ 0.041235] CPU features: detected: 32-bit EL0 Support
[ 0.044182] CPU: All CPU(s) started at EL2
[ 0.044258] alternatives: patching kernel code
[ 0.046162] devtmpfs: initialized
[ 0.062657] Enabled cp15_barrier support
[ 0.062720] Enabled setend support
[ 0.063326] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.063388] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.064151] pinctrl core: initialized pinctrl subsystem
[ 0.064512] DMI not present or invalid.
[ 0.064981] NET: Registered protocol family 16
[ 0.071408] cpuidle: using governor menu
[ 0.072097] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[ 0.072144] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.077713] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.077894] Serial: AMBA PL011 UART driver
[ 0.082449] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.123354] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.124883] bcm2835-dma 3f007000.dma: DMA legacy API manager at (____ptrval____), dmachans=0x1
[ 0.127279] SCSI subsystem initialized
[ 0.127617] usbcore: registered new interface driver usbfs
[ 0.127712] usbcore: registered new interface driver hub
[ 0.127885] usbcore: registered new device driver usb
[ 0.129491] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-07-09 14:41, variant start_cd
[ 0.130505] raspberrypi-firmware soc:firmware: Firmware hash is 6c3fe3f096a93de3b34252ad98cdccadeb534be2
[ 0.133542] clocksource: Switched to clocksource arch_sys_counter
[ 0.256283] VFS: Disk quotas dquot_6.6.0
[ 0.256435] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.256719] FS-Cache: Loaded
[ 0.257204] CacheFiles: Loaded
[ 0.270553] NET: Registered protocol family 2
[ 0.271549] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
[ 0.271626] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.271769] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.271987] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.272266] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.272343] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.272744] NET: Registered protocol family 1
[ 0.273727] RPC: Registered named UNIX socket transport module.
[ 0.273763] RPC: Registered udp transport module.
[ 0.273794] RPC: Registered tcp transport module.
[ 0.273823] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.276536] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.278746] Initialise system trusted keyrings
[ 0.279139] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.291527] FS-Cache: Netfs 'nfs' registered for caching
[ 0.292672] NFS: Registering the id_resolver key type
[ 0.292755] Key type id_resolver registered
[ 0.292786] Key type id_legacy registered
[ 0.296794] Key type asymmetric registered
[ 0.296837] Asymmetric key parser 'x509' registered
[ 0.296928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.297223] io scheduler noop registered
[ 0.297256] io scheduler deadline registered (default)
[ 0.297553] io scheduler cfq registered
[ 0.297587] io scheduler mq-deadline registered (default)
[ 0.297620] io scheduler kyber registered
[ 0.300854] bcm2708_fb soc:fb: FB found 1 display(s)
[ 0.311653] Console: switching to colour frame buffer device 80x30
[ 0.318428] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 640x480
[ 0.324636] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.329151] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.331995] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB)
[ 0.337803] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.343017] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.361587] brd: module loaded
[ 0.379461] loop: module loaded
[ 0.382881] Loading iSCSI transport class v2.0-870.
[ 0.386559] libphy: Fixed MDIO Bus: probed
[ 0.389190] usbcore: registered new interface driver lan78xx
[ 0.391826] usbcore: registered new interface driver smsc95xx
[ 0.394359] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.424867] dwc_otg 3f980000.usb: base=(____ptrval____)
[ 0.627795] Core Release: 2.80a
[ 0.630214] Setting default values for core params
[ 0.632694] Finished setting default values for core params
[ 0.836514] Using Buffer DMA mode
[ 0.839006] Periodic Transfer Interrupt Enhancement - disabled
[ 0.841578] Multiprocessor Interrupt Enhancement - disabled
[ 0.844161] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.846710] Dedicated Tx FIFOs mode
[ 0.850210] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = ffffff8008259000 dma = 0x00000000fdd14000 len=9024
[ 0.855222] FIQ FSM acceleration enabled for :
[ 0.855222] Non-periodic Split Transactions
[ 0.855222] Periodic Split Transactions
[ 0.855222] High-Speed Isochronous Endpoints
[ 0.855222] Interrupt/Control Split Transaction hack enabled
[ 0.866888] WARN::hcd_init_fiq:497: MPHI regs_base at ffffff800804d000
[ 0.869170] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.871430] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.875948] dwc_otg 3f980000.usb: irq 9, io mem 0x00000000
[ 0.878345] Init: Port Power? op_state=1
[ 0.880664] Init: Power Port (0)
[ 0.883396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.888152] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.893076] usb usb1: Product: DWC OTG Controller
[ 0.895614] usb usb1: Manufacturer: Linux 4.19.58-hypriotos-v8 dwc_otg_hcd
[ 0.898205] usb usb1: SerialNumber: 3f980000.usb
[ 0.901559] hub 1-0:1.0: USB hub found
[ 0.904133] hub 1-0:1.0: 1 port detected
[ 0.908302] usbcore: registered new interface driver usb-storage
[ 0.912115] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.914941] bcm2835-cpufreq: min=600000 max=1400000
[ 0.918144] sdhci: Secure Digital Host Controller Interface driver
[ 0.920645] sdhci: Copyright(c) Pierre Ossman
[ 0.923701] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[ 0.926927] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.929808] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
[ 0.932519] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.937146] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.940032] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.942920] usbcore: registered new interface driver usbhid
[ 0.945564] usbhid: USB HID core driver
[ 0.948459] Initializing XFRM netlink socket
[ 0.951071] NET: Registered protocol family 17
[ 0.953829] Key type dns_resolver registered
[ 0.957823] registered taskstats version 1
[ 0.960315] Loading compiled-in X.509 certificates
[ 0.975272] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.977874] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 66, base_baud = 0) is a PL011 rev2
[ 0.985164] console [ttyS0] disabled
[ 0.987654] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550
[ 1.977041] console [ttyS0] enabled
[ 1.984901] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.993572] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 2.029179] sdhost: log_buf @ (____ptrval____) (fdd13000)
[ 2.054000] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.069219] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.078885] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.087012] Indeed it is in host mode hprt0 = 00021501
[ 2.106569] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 2.114728] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.116994] of_cfs_init
[ 2.127392] of_cfs_init: OK
[ 2.133660] Waiting for root device /dev/mmcblk0p2...
[ 2.195060] random: fast init done
[ 2.232416] mmc1: new high speed SDIO card at address 0001
[ 2.261882] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.278399] mmc0: new high speed SDHC card at address aaaa
[ 2.286353] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.295669] Indeed it is in host mode hprt0 = 00001101
[ 2.307232] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[ 2.373991] mmcblk0: p1 p2
[ 2.386604] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 2.398549] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 2.435447] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[ 2.445026] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
[ 2.452723] EXT4-fs (mmcblk0p2): recovery complete
[ 2.499038] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 2.512000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.522713] hub 1-1:1.0: USB hub found
[ 2.529232] hub 1-1:1.0: 4 ports detected
[ 2.823565] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.921006] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 2.934613] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.948216] hub 1-1.1:1.0: USB hub found
[ 2.955076] hub 1-1.1:1.0: 3 ports detected
[ 3.088446] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.102015] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 3.112620] devtmpfs: mounted
[ 3.126378] Freeing unused kernel memory: 2752K
[ 3.133863] Run /sbin/init as init process
[ 3.315103] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[ 3.554658] systemd[1]: System time before build time, advancing clock.
[ 3.663597] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
[ 3.721635] NET: Registered protocol family 10
[ 3.730555] Segment Routing with IPv6
[ 3.762387] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[ 3.776571] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.793761] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.813805] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.823724] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.840642] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.867952] systemd[1]: Detected architecture arm64.
[ 3.868190] random: crng init done
Welcome to Debian GNU/Linux 9 (stretch)!
[ 3.889686] systemd[1]: Set hostname to <black-pearl>.
[ 4.061716] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ 4.079098] libphy: lan78xx-mdiobus: probed
[ 4.122333] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
[ 4.396405] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 4.411239] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 4.427018] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 4.447014] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point.
[ 4.477072] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 4.494005] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 4.514591] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Reached target Remote File Systems.
[ OK ] Listening on udev Control Socket.
[ OK ] Created slice System Slice.
[ OK ] Reached target Slices.
Starting File System Check on Root Device...
Starting Create list of required st…ce nodes for the current kernel...
Mounting Huge Pages File System...
Starting Load Kernel Modules...
Mounting Debug File System...
Starting Restore / save the current clock...
Mounting POSIX Message Queue File System...
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Created slice system-getty.slice.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on Journal Socket (/dev/log).
Starting Journal Service...
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Mounted Debug File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Restore / save the current clock.
[ OK ] Started File System Check Daemon to report status.
Starting Apply Kernel Variables...
Mounting Configuration File System...
Starting Create Static Device Nodes in /dev...
[ OK ] Mounted Configuration File System.te)
[ OK ] Started Journal Service.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ 6.477685] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ OK ] Started Remount Root and Kernel File Systems.
Starting udev Coldplug all Devices...
[ OK ] Reached target Local File Systems (Pre).
Starting Flush Journal to Persistent Storage...
Starting Load/Save Random Seed...
Starting Initial cloud-init job (pre-networking)...
[ OK ] Started Load/Save Random Seed.
[ 6.627768] systemd-journald[117]: Received request to flush runtime journal from PID 1
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started udev Coldplug all Devices.
[ 6.958834] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.016892] vchiq: vchiq_init_state: slot_zero = 0000000017b0af18, is_master = 0
[ OK ] Found device /dev/ttyS0.
[ OK ] Found device /dev/mmcblk0p1.
Mounting /boot...
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Startin[ 7.549184] cfg80211: Loading compiled-in X.509 certificates for regulatory database
g Update UTMP about System Boot/Shutdown...
[ OK ] Reached target System Time Synchronized.
[ 7.598000] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.608076] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.623074] cfg80211: failed to load regulatory.db
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ 7.723182] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.741446] usbcore: registered new interface driver brcmfmac
[ OK ] Found device 7800.
[ 7.929337] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.976130] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
Starting Load/Save RF Kill Switch Status...
[ OK ] Started Load/Save RF Kill Switch Status.
[ 8.089248] brcmfmac: power management disabled
[ OK ] Reached target Paths.
[ OK ] Created slice system-getty.slice.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on Journal Socket (/dev/log).
Starting Journal Service...
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Mounted Debug File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Restore / save the current clock.
[ OK ] Started File System Check Daemon to report status.
Starting Apply Kernel Variables...
Mounting Configuration File System...
Starting Create Static Device Nodes in /dev...
[ OK ] Mounted Configuration File System.te)
[ OK ] Started Journal Service.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ 6.477685] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ OK ] Started Remount Root and Kernel File Systems.
Starting udev Coldplug all Devices...
[ OK ] Reached target Local File Systems (Pre).
Starting Flush Journal to Persistent Storage...
Starting Load/Save Random Seed...
Starting Initial cloud-init job (pre-networking)...
[ OK ] Started Load/Save Random Seed.
[ 6.627768] systemd-journald[117]: Received request to flush runtime journal from PID 1
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started udev Coldplug all Devices.
[ 6.958834] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.016892] vchiq: vchiq_init_state: slot_zero = 0000000017b0af18, is_master = 0
[ OK ] Found device /dev/ttyS0.
[ OK ] Found device /dev/mmcblk0p1.
Mounting /boot...
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Startin[ 7.549184] cfg80211: Loading compiled-in X.509 certificates for regulatory database
g Update UTMP about System Boot/Shutdown...
[ OK ] Reached target System Time Synchronized.
[ 7.598000] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.608076] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.623074] cfg80211: failed to load regulatory.db
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ 7.723182] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.741446] usbcore: registered new interface driver brcmfmac
[ OK ] Found device 7800.
[ 7.929337] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.976130] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
Starting Load/Save RF Kill Switch Status...
[ OK ] Started Load/Save RF Kill Switch Status.
[ 8.089248] brcmfmac: power management disabled
[ 15.381626] cloud-init[139]: Cloud-init v. 0.7.9 running 'init-local' at Sat, 13 Jul 2019 21:34:14 +0000. Up 13.24 seconds.
[ OK ] Started Initial cloud-init job (pre-networking).
[ OK ] Reached target Network (Pre).
[ OK ] Started ifup for eth0.
Starting Raise network interfaces...
[ 16.155836] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ OK ] Started Raise network interfaces.
Starting Initial cloud-init job (metadata service crawler)...
[ OK ] Reached target Network.
[ OK ] Listening on Journal Socket (/dev/log).
Starting Journal Service...
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Mounted Debug File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Restore / save the current clock.
[ OK ] Started File System Check Daemon to report status.
Starting Apply Kernel Variables...
Mounting Configuration File System...
Starting Create Static Device Nodes in /dev...
[ OK ] Mounted Configuration File System.te)
[ OK ] Started Journal Service.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ 6.477685] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ OK ] Started Remount Root and Kernel File Systems.
Starting udev Coldplug all Devices...
[ OK ] Reached target Local File Systems (Pre).
Starting Flush Journal to Persistent Storage...
Starting Load/Save Random Seed...
Starting Initial cloud-init job (pre-networking)...
[ OK ] Started Load/Save Random Seed.
[ 6.627768] systemd-journald[117]: Received request to flush runtime journal from PID 1
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started udev Coldplug all Devices.
[ 6.958834] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.016892] vchiq: vchiq_init_state: slot_zero = 0000000017b0af18, is_master = 0
[ OK ] Found device /dev/ttyS0.
[ OK ] Found device /dev/mmcblk0p1.
Mounting /boot...
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Startin[ 7.549184] cfg80211: Loading compiled-in X.509 certificates for regulatory database
g Update UTMP about System Boot/Shutdown...
[ OK ] Reached target System Time Synchronized.
[ 7.598000] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.608076] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.623074] cfg80211: failed to load regulatory.db
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ 7.723182] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.741446] usbcore: registered new interface driver brcmfmac
[ OK ] Found device 7800.
[ 7.929337] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.976130] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
Starting Load/Save RF Kill Switch Status...
[ OK ] Started Load/Save RF Kill Switch Status.
[ 8.089248] brcmfmac: power management disabled
[ 15.381626] cloud-init[139]: Cloud-init v. 0.7.9 running 'init-local' at Sat, 13 Jul 2019 21:34:14 +0000. Up 13.24 seconds.
[ OK ] Started Initial cloud-init job (pre-networking).
[ OK ] Reached target Network (Pre).
[ OK ] Started ifup for eth0.
Starting Raise network interfaces...
[ 16.155836] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ OK ] Started Raise network interfaces.
Starting Initial cloud-init job (metadata service crawler)...
[ OK ] Reached target Network.
[ OK ] Created slice System Slice.
[ OK ] Reached target Slices.
Starting File System Check on Root Device...
Starting Create list of required st…ce nodes for the current kernel...
Mounting Huge Pages File System...
Starting Load Kernel Modules...
Mounting Debug File System...
Starting Restore / save the current clock...
Mounting POSIX Message Queue File System...
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Created slice system-getty.slice.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on Journal Socket (/dev/log).
Starting Journal Service...
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Mounted Debug File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
[ OK ] Started Load Kernel Modules.
[ OK ] Started Restore / save the current clock.
[ OK ] Started File System Check Daemon to report status.
Starting Apply Kernel Variables...
Mounting Configuration File System...
Starting Create Static Device Nodes in /dev...
[ OK ] Mounted Configuration File System.te)
[ OK ] Started Journal Service.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ 6.477685] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ OK ] Started Remount Root and Kernel File Systems.
Starting udev Coldplug all Devices...
[ OK ] Reached target Local File Systems (Pre).
Starting Flush Journal to Persistent Storage...
Starting Load/Save Random Seed...
Starting Initial cloud-init job (pre-networking)...
[ OK ] Started Load/Save Random Seed.
[ 6.627768] systemd-journald[117]: Received request to flush runtime journal from PID 1
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started udev Coldplug all Devices.
[ 6.958834] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.016892] vchiq: vchiq_init_state: slot_zero = 0000000017b0af18, is_master = 0
[ OK ] Found device /dev/ttyS0.
[ OK ] Found device /dev/mmcblk0p1.
Mounting /boot...
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Startin[ 7.549184] cfg80211: Loading compiled-in X.509 certificates for regulatory database
g Update UTMP about System Boot/Shutdown...
[ OK ] Reached target System Time Synchronized.
[ 7.598000] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.608076] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.623074] cfg80211: failed to load regulatory.db
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ 7.723182] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.741446] usbcore: registered new interface driver brcmfmac
[ OK ] Found device 7800.
[ 7.929337] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.976130] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
Starting Load/Save RF Kill Switch Status...
[ OK ] Started Load/Save RF Kill Switch Status.
[ 8.089248] brcmfmac: power management disabled
[ 15.381626] cloud-init[139]: Cloud-init v. 0.7.9 running 'init-local' at Sat, 13 Jul 2019 21:34:14 +0000. Up 13.24 seconds.
[ OK ] Started Initial cloud-init job (pre-networking).
[ OK ] Reached target Network (Pre).
[ OK ] Started ifup for eth0.
Starting Raise network interfaces...
[ 16.155836] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.826338] cloud-init[334]: | .o+ S o . . |
[ 35.841354] cloud-init[334]: [| . . += . o + | OK
] Started Cgroup management daemon.
[ 35.842844] cloud-init[334]: | E =.. . = |
[ 35.861321] cloud-init[334]: | . . + o o |
[ OK ] Started D-Bus System Message Bus.
[ 35.875349] cloud-init[334]: | . ...o.. .. |
[ 35.883435] cloud-init[334]: +----[SHA256]-----+
[ 35.892501] cloud-init[334]: Generating public/private ed25519 key pair.
[ 35.903230] cloud-init[334]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key.
[ 35.916360] cloud-init[334]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub.
[ 35.929708] cloud-init[334]: The key fingerprint is:
[ 35.939451] cloud-init[334]: SHA256:1daWZ/U97zvEK7gLw2jUwtuVZOjReEsQvLX81pIdWxQ root@[ 35.950844] new mount options do not match the existing superblock, will be ignored
black-pearl
[ 35.966282] cloud-init[334]: The key's randomart image is:
[ 35.975422] cloud-init[334]: +--[ED25519 256]--+
[ 35.984407] cloud-init[334]: | .o. Eo|
[ 35.993350] cloud-init[334]: | .=o . .=|
[ 36.001444] cloud-init[334]: | +=*+ +o=|
[ 36.010314] cloud-init[334]: | . oo*+o. ++|
[ 36.019255] cloud-init[334]: | +So +. = =|
[ 36.028086] cloud-init[334]: | . * . = B |Starting OpenBSD Secure Shell server...
[ 36.029413] cloud-init[334]: | + = o o o|
[ 36.047529] cloud-init[334]: Starting Permit User Sessions...| . o. . o.|
Starting LSB: Start NTP daemon...
[ 36.059386] cloud-init[334]: | oo ...|
Starting Apply the settings specified in cloud-config...
[ 36.086396] cloud-init[334]: +----[SHA256]-----+
Starting Network Name Resolution...
Starting Avahi mDNS/DNS-SD Stack...
Starting Docker Application Container Engine...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started System Logging Service.
[ OK ] Started Permit User Sessions.
[ OK ] Started Login Service.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started Network Name Resolution.
[ OK ] Started LSB: Start NTP daemon.
[ 40.128786] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 40.155475] Bridge firewalling registered
[ 42.020789] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
HypriotOS (Debian GNU/Linux 9) black-pearl ttyS0
black-pearl login: [ 45.376065] cloud-init[382]: Generating locales (this might take a while)...
[ 52.882523] cloud-init[382]: en_US.UTF-8... done
[ 52.916732] cloud-init[382]: Generation complete.
[ 55.929424] cloud-init[382]: Cloud-init v. 0.7.9 running 'modules:config' at Sat, 13 Jul 2019 21:34:43 +0000. Up 41.83 seconds.
ci-info: no authorized ssh keys fingerprints found for user pirate.
<14>Jul 13 21:35:04 ec2:
<14>Jul 13 21:35:04 ec2: #############################################################
<14>Jul 13 21:35:04 ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
<14>Jul 13 21:35:04 ec2: 1024 SHA256:UUaNfAWGKvOoIt7w6KIGm5xAsgshKGg0+2/HCDcEhGE root@black-pearl (DSA)
<14>Jul 13 21:35:04 ec2: 256 SHA256:AOt1HU1UM6EqsjEQRXj68mRER0MD2k//pUO7wiq5isQ root@black-pearl (ECDSA)
<14>Jul 13 21:35:04 ec2: 256 SHA256:1daWZ/U97zvEK7gLw2jUwtuVZOjReEsQvLX81pIdWxQ root@black-pearl (ED25519)
<14>Jul 13 21:35:04 ec2: 2048 SHA256:ditvavxYUurr3FSmtvWezTXYPhPK7BBCeHfkvD953TQ root@black-pearl (RSA)
<14>Jul 13 21:35:04 ec2: -----END SSH HOST KEY FINGERPRINTS-----
<14>Jul 13 21:35:04 ec2: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBPkm6iQZUeImgRw9mPb9bxXVjLDP66CzuZ9ZrB3m4JK/24F8tpspv2DirvY0CXr5aTHwlYm0S5314RhiU001k7U= root@black-pearl
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFt61PJxt1r/JZtyrCtKTFESBZ6A4vYi7eV1gXwEg5Gd root@black-pearl
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCxZSB4DJQXqqZQYJRYKvwlm8cR8vx9H6SdJRUXtEa+hhfmvr14v/VlRqZt+/MEz8x+ISkdw7sqUHqd9dFY34l4Db/dMsfN5wOF+WnT/dFOOJclRxrVDIJmZmOIAIY/HFYBJKvX5DQ033Ne+NbfcbQkgOUsfWJ92afYW0GcAgmZykj3Qeqi4gtsEYWqZbJc7Nsa8vSdQ7gpCmTaxeE6oz7e60xE7UaF/0T9mvcX/ahPpT3sipLb7THWyiMiXQDkA03FzN/43azIRuutE99nAjD2+Cq7C78YXutTC8f6jDLDxQj2xVgoeuYtq6uDlx9Q3D+raBJ4T9N3zin7CHG984zJ root@black-pearl
-----END SSH HOST KEY KEYS-----
[ 63.286411] cloud-init[577]: Cloud-init v. 0.7.9 running 'modules:final' at Sat, 13 Jul 2019 21:35:02 +0000. Up 61.53 seconds.
[ 63.288844] cloud-init[577]: ci-info: no authorized ssh keys fingerprints found for user pirate.
[ 63.290987] cloud-init[577]: Cloud-init v. 0.7.9 finished at Sat, 13 Jul 2019 21:35:04 +0000. Datasource DataSourceNoCloud [seed=/var/lib/cloud/seed/nocloud-net][dsmode=net]. Up 63.20 seconds
HypriotOS (Debian GNU/Linux 9) black-pearl ttyS0
black-pearl login:
[ OK ] Started Raise network interfaces.
[ 35.796450] cloud-init[334]: | +++.o . . |
[ 35.814352] cloud-initStarting Login Service...[334]:
| ..o.= . . |
Starting System Logging Service...
[ 35.826338] cloud-init[334]: | .o+ S o . . |
[ 35.841354] cloud-init[334]: [| . . += . o + | OK
] Started Cgroup management daemon.
[ 35.842844] cloud-init[334]: | E =.. . = |
[ 35.861321] cloud-init[334]: | . . + o o |
[ OK ] Started D-Bus System Message Bus.
[ 35.875349] cloud-init[334]: | . ...o.. .. |
[ 35.883435] cloud-init[334]: +----[SHA256]-----+
[ 35.892501] cloud-init[334]: Generating public/private ed25519 key pair.
[ 35.903230] cloud-init[334]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key.
[ 35.916360] cloud-init[334]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub.
[ 35.929708] cloud-init[334]: The key fingerprint is:
[ 35.939451] cloud-init[334]: SHA256:1daWZ/U97zvEK7gLw2jUwtuVZOjReEsQvLX81pIdWxQ root@[ 35.950844] new mount options do not match the existing superblock, will be ignored
black-pearl
[ 35.966282] cloud-init[334]: The key's randomart image is:
[ 35.975422] cloud-init[334]: +--[ED25519 256]--+
[ 35.984407] cloud-init[334]: | .o. Eo|
[ 35.993350] cloud-init[334]: | .=o . .=|
[ 36.001444] cloud-init[334]: | +=*+ +o=|
[ 36.010314] cloud-init[334]: | . oo*+o. ++|
[ 36.019255] cloud-init[334]: | +So +. = =|
[ 36.028086] cloud-init[334]: | . * . = B |Starting OpenBSD Secure Shell server...
[ 36.029413] cloud-init[334]: | + = o o o|
[ 36.047529] cloud-init[334]: Starting Permit User Sessions...| . o. . o.|
Starting LSB: Start NTP daemon...
[ 36.059386] cloud-init[334]: | oo ...|
Starting Apply the settings specified in cloud-config...
[ 36.086396] cloud-init[334]: +----[SHA256]-----+
Starting Network Name Resolution...
Starting Avahi mDNS/DNS-SD Stack...
Starting Docker Application Container Engine...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started System Logging Service.
[ OK ] Started Permit User Sessions.
[ OK ] Started Login Service.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started Network Name Resolution.
[ OK ] Started LSB: Start NTP daemon.
[ 40.128786] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 40.155475] Bridge firewalling registered
[ 42.020789] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
HypriotOS (Debian GNU/Linux 9) black-pearl ttyS0
black-pearl login: [ 45.376065] cloud-init[382]: Generating locales (this might take a while)...
[ 52.882523] cloud-init[382]: en_US.UTF-8... done
[ 52.916732] cloud-init[382]: Generation complete.
[ 55.929424] cloud-init[382]: Cloud-init v. 0.7.9 running 'modules:config' at Sat, 13 Jul 2019 21:34:43 +0000. Up 41.83 seconds.
ci-info: no authorized ssh keys fingerprints found for user pirate.
<14>Jul 13 21:35:04 ec2:
<14>Jul 13 21:35:04 ec2: #############################################################
<14>Jul 13 21:35:04 ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
<14>Jul 13 21:35:04 ec2: 1024 SHA256:UUaNfAWGKvOoIt7w6KIGm5xAsgshKGg0+2/HCDcEhGE root@black-pearl (DSA)
<14>Jul 13 21:35:04 ec2: 256 SHA256:AOt1HU1UM6EqsjEQRXj68mRER0MD2k//pUO7wiq5isQ root@black-pearl (ECDSA)
<14>Jul 13 21:35:04 ec2: 256 SHA256:1daWZ/U97zvEK7gLw2jUwtuVZOjReEsQvLX81pIdWxQ root@black-pearl (ED25519)
<14>Jul 13 21:35:04 ec2: 2048 SHA256:ditvavxYUurr3FSmtvWezTXYPhPK7BBCeHfkvD953TQ root@black-pearl (RSA)
<14>Jul 13 21:35:04 ec2: -----END SSH HOST KEY FINGERPRINTS-----
<14>Jul 13 21:35:04 ec2: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBPkm6iQZUeImgRw9mPb9bxXVjLDP66CzuZ9ZrB3m4JK/24F8tpspv2DirvY0CXr5aTHwlYm0S5314RhiU001k7U= root@black-pearl
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFt61PJxt1r/JZtyrCtKTFESBZ6A4vYi7eV1gXwEg5Gd root@black-pearl
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCxZSB4DJQXqqZQYJRYKvwlm8cR8vx9H6SdJRUXtEa+hhfmvr14v/VlRqZt+/MEz8x+ISkdw7sqUHqd9dFY34l4Db/dMsfN5wOF+WnT/dFOOJclRxrVDIJmZmOIAIY/HFYBJKvX5DQ033Ne+NbfcbQkgOUsfWJ92afYW0GcAgmZykj3Qeqi4gtsEYWqZbJc7Nsa8vSdQ7gpCmTaxeE6oz7e60xE7UaF/0T9mvcX/ahPpT3sipLb7THWyiMiXQDkA03FzN/43azIRuutE99nAjD2+Cq7C78YXutTC8f6jDLDxQj2xVgoeuYtq6uDlx9Q3D+raBJ4T9N3zin7CHG984zJ root@black-pearl
-----END SSH HOST KEY KEYS-----
[ 63.286411] cloud-init[577]: Cloud-init v. 0.7.9 running 'modules:final' at Sat, 13 Jul 2019 21:35:02 +0000. Up 61.53 seconds.
[ 63.288844] cloud-init[577]: ci-info: no authorized ssh keys fingerprints found for user pirate.
[ 63.290987] cloud-init[577]: Cloud-init v. 0.7.9 finished at Sat, 13 Jul 2019 21:35:04 +0000. Datasource DataSourceNoCloud [seed=/var/lib/cloud/seed/nocloud-net][dsmode=net]. Up 63.20 seconds
HypriotOS (Debian GNU/Linux 9) black-pearl ttyS0
black-pearl login:
[ 35.841354] cloud-init[334]: [| . . += . o + | OK
] Started Cgroup management daemon.
[ 35.842844] cloud-init[334]: | E =.. . = |
[ 35.861321] cloud-init[334]: | . . + o o |
[ OK ] Started D-Bus System Message Bus.
[ 35.875349] cloud-init[334]: | . ...o.. .. |
[ 35.883435] cloud-init[334]: +----[SHA256]-----+
[ 35.892501] cloud-init[334]: Generating public/private ed25519 key pair.
[ 35.903230] cloud-init[334]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key.
[ 35.916360] cloud-init[334]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub.
[ 35.929708] cloud-init[334]: The key fingerprint is:
[ 35.939451] cloud-init[334]: SHA256:1daWZ/U97zvEK7gLw2jUwtuVZOjReEsQvLX81pIdWxQ root@[ 35.950844] new mount options do not match the existing superblock, will be ignored
black-pearl
[ 35.966282] cloud-init[334]: The key's randomart image is:
[ 35.975422] cloud-init[334]: +--[ED25519 256]--+
[ 35.984407] cloud-init[334]: | .o. Eo|
[ 35.993350] cloud-init[334]: | .=o . .=|
[ 36.001444] cloud-init[334]: | +=*+ +o=|
[ 36.010314] cloud-init[334]: | . oo*+o. ++|
[ 36.019255] cloud-init[334]: | +So +. = =|
[ 36.028086] cloud-init[334]: | . * . = B |Starting OpenBSD Secure Shell server...
[ 36.029413] cloud-init[334]: | + = o o o|
[ 36.047529] cloud-init[334]: Starting Permit User Sessions...| . o. . o.|
Starting LSB: Start NTP daemon...
[ 36.059386] cloud-init[334]: | oo ...|
Starting Apply the settings specified in cloud-config...
[ 36.086396] cloud-init[334]: +----[SHA256]-----+
Starting Network Name Resolution...
Starting Avahi mDNS/DNS-SD Stack...
Starting Docker Application Container Engine...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started System Logging Service.
[ OK ] Started Permit User Sessions.
[ OK ] Started Login Service.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started Network Name Resolution.
[ OK ] Started LSB: Start NTP daemon.
[ 40.128786] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 40.155475] Bridge firewalling registered
[ 42.020789] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
HypriotOS (Debian GNU/Linux 9) black-pearl ttyS0
black-pearl login: [ 45.376065] cloud-init[382]: Generating locales (this might take a while)...
[ 52.882523] cloud-init[382]: en_US.UTF-8... done
[ 52.916732] cloud-init[382]: Generation complete.
[ 55.929424] cloud-init[382]: Cloud-init v. 0.7.9 running 'modules:config' at Sat, 13 Jul 2019 21:34:43 +0000. Up 41.83 seconds.
ci-info: no authorized ssh keys fingerprints found for user pirate.
<14>Jul 13 21:35:04 ec2:
<14>Jul 13 21:35:04 ec2: #############################################################
<14>Jul 13 21:35:04 ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
<14>Jul 13 21:35:04 ec2: 1024 SHA256:UUaNfAWGKvOoIt7w6KIGm5xAsgshKGg0+2/HCDcEhGE root@black-pearl (DSA)
<14>Jul 13 21:35:04 ec2: 256 SHA256:AOt1HU1UM6EqsjEQRXj68mRER0MD2k//pUO7wiq5isQ root@black-pearl (ECDSA)
<14>Jul 13 21:35:04 ec2: 256 SHA256:1daWZ/U97zvEK7gLw2jUwtuVZOjReEsQvLX81pIdWxQ root@black-pearl (ED25519)
<14>Jul 13 21:35:04 ec2: 2048 SHA256:ditvavxYUurr3FSmtvWezTXYPhPK7BBCeHfkvD953TQ root@black-pearl (RSA)
<14>Jul 13 21:35:04 ec2: -----END SSH HOST KEY FINGERPRINTS-----
<14>Jul 13 21:35:04 ec2: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBPkm6iQZUeImgRw9mPb9bxXVjLDP66CzuZ9ZrB3m4JK/24F8tpspv2DirvY0CXr5aTHwlYm0S5314RhiU001k7U= root@black-pearl
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFt61PJxt1r/JZtyrCtKTFESBZ6A4vYi7eV1gXwEg5Gd root@black-pearl
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCxZSB4DJQXqqZQYJRYKvwlm8cR8vx9H6SdJRUXtEa+hhfmvr14v/VlRqZt+/MEz8x+ISkdw7sqUHqd9dFY34l4Db/dMsfN5wOF+WnT/dFOOJclRxrVDIJmZmOIAIY/HFYBJKvX5DQ033Ne+NbfcbQkgOUsfWJ92afYW0GcAgmZykj3Qeqi4gtsEYWqZbJc7Nsa8vSdQ7gpCmTaxeE6oz7e60xE7UaF/0T9mvcX/ahPpT3sipLb7THWyiMiXQDkA03FzN/43azIRuutE99nAjD2+Cq7C78YXutTC8f6jDLDxQj2xVgoeuYtq6uDlx9Q3D+raBJ4T9N3zin7CHG984zJ root@black-pearl
-----END SSH HOST KEY KEYS-----
[ 63.286411] cloud-init[577]: Cloud-init v. 0.7.9 running 'modules:final' at Sat, 13 Jul 2019 21:35:02 +0000. Up 61.53 seconds.
[ 63.288844] cloud-init[577]: ci-info: no authorized ssh keys fingerprints found for user pirate.
[ 63.290987] cloud-init[577]: Cloud-init v. 0.7.9 finished at Sat, 13 Jul 2019 21:35:04 +0000. Datasource DataSourceNoCloud [seed=/var/lib/cloud/seed/nocloud-net][dsmode=net]. Up 63.20 seconds
HypriotOS (Debian GNU/Linux 9) black-pearl ttyS0
black-pearl login:
[ 35.841354] cloud-init[334]: [| . . += . o + | OK
] Started Cgroup management daemon.
[ 35.842844] cloud-init[334]: | E =.. . = |
[ 35.861321] cloud-init[334]: | . . + o o |
[ OK ] Started D-Bus System Message Bus.
[ 35.875349] cloud-init[334]: | . ...o.. .. |
[ 35.883435] cloud-init[334]: +----[SHA256]-----+
[ 35.892501] cloud-init[334]: Generating public/private ed25519 key pair.
[ 35.903230] cloud-init[334]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key.
[ 35.916360] cloud-init[334]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub.
[ 35.929708] cloud-init[334]: The key fingerprint is:
[ 35.939451] cloud-init[334]: SHA256:1daWZ/U97zvEK7gLw2jUwtuVZOjReEsQvLX81pIdWxQ root@[ 35.950844] new mount options do not match the existing superblock, will be ignored
black-pearl
[ 35.966282] cloud-init[334]: The key's randomart image is:
[ 35.975422] cloud-init[334]: +--[ED25519 256]--+
[ 35.984407] cloud-init[334]: | .o. Eo|
[ 35.993350] cloud-init[334]: | .=o . .=|
[ 36.001444] cloud-init[334]: | +=*+ +o=|
[ 36.010314] cloud-init[334]: | . oo*+o. ++|
[ 36.019255] cloud-init[334]: | +So +. = =|
[ 36.028086] cloud-init[334]: | . * . = B |Starting OpenBSD Secure Shell server...
[ 36.029413] cloud-init[334]: | + = o o o|
[ 36.047529] cloud-init[334]: Starting Permit User Sessions...| . o. . o.|
Starting LSB: Start NTP daemon...
[ 36.059386] cloud-init[334]: | oo ...|
Starting Apply the settings specified in cloud-config...
[ 36.086396] cloud-init[334]: +----[SHA256]-----+
Starting Network Name Resolution...
Starting Avahi mDNS/DNS-SD Stack...
Starting Docker Application Container Engine...
[ OK ] Started Regular background program processing daemon.
[ OK ] Started System Logging Service.
[ OK ] Started Permit User Sessions.
[ OK ] Started Login Service.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started Network Name Resolution.
[ OK ] Started LSB: Start NTP daemon.
[ 40.128786] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 40.155475] Bridge firewalling registered
[ 42.020789] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
HypriotOS (Debian GNU/Linux 9) black-pearl ttyS0
black-pearl login: [ 45.376065] cloud-init[382]: Generating locales (this might take a while)...
[ 52.882523] cloud-init[382]: en_US.UTF-8... done
[ 52.916732] cloud-init[382]: Generation complete.
[ 55.929424] cloud-init[382]: Cloud-init v. 0.7.9 running 'modules:config' at Sat, 13 Jul 2019 21:34:43 +0000. Up 41.83 seconds.
ci-info: no authorized ssh keys fingerprints found for user pirate.
<14>Jul 13 21:35:04 ec2:
<14>Jul 13 21:35:04 ec2: #############################################################
<14>Jul 13 21:35:04 ec2: -----BEGIN SSH HOST KEY FINGERPRINTS-----
<14>Jul 13 21:35:04 ec2: 1024 SHA256:UUaNfAWGKvOoIt7w6KIGm5xAsgshKGg0+2/HCDcEhGE root@black-pearl (DSA)
<14>Jul 13 21:35:04 ec2: 256 SHA256:AOt1HU1UM6EqsjEQRXj68mRER0MD2k//pUO7wiq5isQ root@black-pearl (ECDSA)
<14>Jul 13 21:35:04 ec2: 256 SHA256:1daWZ/U97zvEK7gLw2jUwtuVZOjReEsQvLX81pIdWxQ root@black-pearl (ED25519)
<14>Jul 13 21:35:04 ec2: 2048 SHA256:ditvavxYUurr3FSmtvWezTXYPhPK7BBCeHfkvD953TQ root@black-pearl (RSA)
<14>Jul 13 21:35:04 ec2: -----END SSH HOST KEY FINGERPRINTS-----
<14>Jul 13 21:35:04 ec2: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBPkm6iQZUeImgRw9mPb9bxXVjLDP66CzuZ9ZrB3m4JK/24F8tpspv2DirvY0CXr5aTHwlYm0S5314RhiU001k7U= root@black-pearl
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFt61PJxt1r/JZtyrCtKTFESBZ6A4vYi7eV1gXwEg5Gd root@black-pearl
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCxZSB4DJQXqqZQYJRYKvwlm8cR8vx9H6SdJRUXtEa+hhfmvr14v/VlRqZt+/MEz8x+ISkdw7sqUHqd9dFY34l4Db/dMsfN5wOF+WnT/dFOOJclRxrVDIJmZmOIAIY/HFYBJKvX5DQ033Ne+NbfcbQkgOUsfWJ92afYW0GcAgmZykj3Qeqi4gtsEYWqZbJc7Nsa8vSdQ7gpCmTaxeE6oz7e60xE7UaF/0T9mvcX/ahPpT3sipLb7THWyiMiXQDkA03FzN/43azIRuutE99nAjD2+Cq7C78YXutTC8f6jDLDxQj2xVgoeuYtq6uDlx9Q3D+raBJ4T9N3zin7CHG984zJ root@black-pearl
-----END SSH HOST KEY KEYS-----
[ 63.286411] cloud-init[577]: Cloud-init v. 0.7.9 running 'modules:final' at Sat, 13 Jul 2019 21:35:02 +0000. Up 61.53 seconds.
[ 63.288844] cloud-init[577]: ci-info: no authorized ssh keys fingerprints found for user pirate.
[ 63.290987] cloud-init[577]: Cloud-init v. 0.7.9 finished at Sat, 13 Jul 2019 21:35:04 +0000. Datasource DataSourceNoCloud [seed=/var/lib/cloud/seed/nocloud-net][dsmode=net]. Up 63.20 seconds
HypriotOS (Debian GNU/Linux 9) black-pearl ttyS0
black-pearl login:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment