OctoPrint on Pi setup routine

octopi.md

Setup

• Get Raspberry Pi Imager
• Follow Installing Octo Pi section
• open boot drive and add wpa_supplicant.conf
• Fill content with correct data, template:

  country=us
  update_config=1
  ctrl_interface=/var/run/wpa_supplicant
  
  network={
    scan_ssid=1
    ssid="MyNetworkSSID"
    psk="Pa55w0rd1234"
  }

• Save and boot the sd card on pi
• SSH into pi and execute sudo apt dpdate && sudo apt upgrade -y
• Add dwc_otg.speed=1 to /boot/cmdline.txt, use either:
  a) sudo echo "dwc_otg.speed=1" >> cmdline.txt
  b) nano /boot/cmdline.txt -> append dwc_otg.speed=1 and save (ctrl+x, y, enter)
• Log in to OctoPrint instance (web interface) and go to Settings -> Backup and Restore -> Restore settings from file
• In ssh sudo reboot