sisteron: linux boot log

U-BOOT: bootm
## Booting kernel from Legacy Image at 86000000 ...
   Image Name:   Linux-3.4.39.13
   Created:      2017-07-14   9:14:16 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    13206080 Bytes = 12.6 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.4.39.13 (user@ws-299) (gcc version 4.8.3 20140401 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.04 - Linaro GCC 4.8-2014.04) ) #4 SMP PREEMPT Fri Jul 14 12:14:11 +03 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] SMP87XX release version: sigma-3.4-42-arm
[    0.000000] Configured for SMP87XX detected SMP8758 (revision ES1).
[    0.000000] Detected CPU/System/DSP Frequencies: 1215.00/398.25/398.25MHz
[    0.000000] @c0e9503c
[    0.000000] (0x00) [x.ddr.0.density] = 08 00 00 00 .
[    0.000000] (0x00) [x.ddr.1.density] = 08 00 00 00 .
[    0.000000] (0x00) [a.avclk_mux] = 00 00 40 17 .
[    0.000000] (0x00) [a.hostclk_mux] = 31 01 98 06 .
[    0.000000] (0x00) [a.pll.3.pll] = 33 00 00 01 .
[    0.000000] (0x00) [a.pll.1.div] = 0f 06 00 00 .
[    0.000000] (0x00) [a.pll.3.div] = 02 04 00 00 .
[    0.000000] (0x00) [a.cd0_freq] = 00 00 00 00 .
[    0.000000] (0x00) [a.cd1_freq] = 00 00 00 00 .
[    0.000000] (0x00) [a.cd2_freq] = 00 d8 b8 05 .
[    0.000000] (0x00) [a.cd3_freq] = 00 87 93 03 .
[    0.000000] (0x00) [a.cd4_freq] = 00 00 00 00 .
[    0.000000] (0x00) [a.cd5_freq] = 00 00 00 00 .
[    0.000000] (0x00) [a.cd6_freq] = 00 d8 b8 05 .
[    0.000000] (0x00) [a.cd7_freq] = 00 00 00 00 .
[    0.000000] (0x00) [a.cd8_freq] = 00 00 00 00 .
[    0.000000] (0x00) [a.cd9_freq] = 00 00 00 00 .
[    0.000000] (0x00) [a.cd10_freq] = 00 00 00 00 .
[    0.000000] (0x00) [a.cd11_freq] = 00 00 00 00 .
[    0.000000] (0x00) [a.irq_rise_edge_lo] = 06 ca 28 ff .
[    0.000000] (0x00) [a.irq_rise_edge_hi] = 1f 00 10 8c .
[    0.000000] (0x00) [a.irq_fall_edge_lo] = 00 c0 00 00 .
[    0.000000] (0x00) [a.irq_fall_edge_hi] = 00 00 00 00 .
[    0.000000] (0x00) [a.gpio_irq_map] = 00 08 0a 00 .
[    0.000000] (0x00) [a.pcidev1_irq_route] = 01 01 01 01 .
[    0.000000] (0x00) [a.pcidev2_irq_route] = 01 01 01 01 .
[    0.000000] (0x00) [a.pcidev3_irq_route] = 01 01 01 01 .
[    0.000000] (0x00) [a.pcidev4_irq_route] = 01 01 01 01 .
[    0.000000] (0x00) [a.gpio_dir] = 00 08 00 00 .
[    0.000000] (0x00) [a.gpio_data] = 00 08 00 00 .
[    0.000000] (0x00) [a.pb_def_timing] = 02 02 08 03 .
[    0.000000] (0x00) [a.pb_cs_config] = 07 00 37 04 .
[    0.000000] (0x00) [a.pb_cs_config1] = 00 00 00 00 .
[    0.000000] (0x00) [a.pb_cs_ctrl] = 22 00 00 00 .
[    0.000000] (0x00) [a.pb_timing0] = 02 02 08 03 .
[    0.000000] (0x00) [a.pb_use_timing0] = f3 03 00 00 .
[    0.000000] (0x00) [a.pb_timing1] = 00 00 04 04 .
[    0.000000] (0x00) [a.pb_use_timing1] = f4 03 00 00 .
[    0.000000] (0x00) [a.nandpart0_params] = 19 00 dc 2c 58 02 b8 0b 40 00 5a 6b 05 09 2d 05 2d 06 04 08 35 00 00 00 04 02 0b 00 0e 00 04 04 0e 00 00 04 06 00 00 08 .
[    0.000000] (0x00) [a.nandpart1_params] = 19 00 dc 20 bc 02 d0 07 40 00 5a 6b 06 0b 2c 03 2c 07 05 09 35 00 00 00 04 02 0b 00 0e 00 04 04 0e 00 00 04 06 00 00 08 .
[    0.000000] (0x00) [a.uart0_gpio_mode] = 00 00 00 00 .
[    0.000000] (0x00) [a.uart0_gpio_dir] = 00 00 00 00 .
[    0.000000] (0x00) [a.uart0_gpio_data] = 00 00 00 00 .
[    0.000000] (0x00) [a.uart1_baudrate] = 00 c2 01 00 .
[    0.000000] (0x00) [a.scard_5v_pin] = 02 00 00 00 .
[    0.000000] (0x00) [a.scard_cmd_pin] = 01 00 00 00 .
[    0.000000] (0x00) [a.scard_off_pin] = 00 00 00 00 .
[    0.000000] (0x00) [a.board_id] = 20 31 31 37 32 2d 45 31 20 4d 54 44 00 .
[    0.000000] (0x00) [xmb.comment] = 2d 2d 2d 20 72 65 76 69 65 77 20 78 6d 61 73 62 6f 6f 74 2f 63 6f 6e 66 69 67 73 2f 53 4d 50 38 37 35 39 2e 63 6f 6e 66 69 67 20 66 6f 72 20 64 65 74 61 69 6c 73 20 5b 78 6d 62 2d 65 7a 62 6f 6f 74 2d 6e 61 6e 64 5f 73 74 32 5
d 20 2d 2d 2d 0a .
[    0.000000] (0x00) [a.enable_devices] = f8 03 23 00 .
[    0.000000] (0x00) [a.eth_mac] = 20 30 30 3a 31 36 3a 65 38 3a 30 30 2f 32 35 00 .
[    0.000000] (0x00) [a.eth1_mac] = 20 30 30 3a 31 36 3a 65 38 3a 30 30 2f 32 35 00 .
[    0.000000] (0x00) [a.cs0_rsvd_pblk] = 00 10 00 00 .
[    0.000000] (0x00) [a.cs1_rsvd_pblk] = 00 10 00 00 .
[    0.000000] (0x00) [a.sata_channel_cfg] = 27 85 00 00 .
[    0.000000] (0x00) [z.boot0] = 00 00 10 00 .
[    0.000000] (0x00) [z.boot0_in_virtualzone] = 01 00 00 00 .
[    0.000000] (0x00) [z.boot1] = 00 00 10 01 .
[    0.000000] (0x00) [z.boot1_in_virtualzone] = 02 00 00 00 .
[    0.000000] (0x00) [z.imatromfs_offset] = 00 00 50 00 .
[    0.000000] (0x00) [z.imatromfs_in_virtualzone] = 02 00 00 00 .
[    0.000000] (0x00) [z.imatromfs_size] = 00 00 c0 00 .
[    0.000000] (0x00) [z.imatromfs_mm] = 00 00 00 00 .
[    0.000000] (0x00) [z.xmatromfs_offset] = 00 00 20 00 .
[    0.000000] (0x00) [z.xmatromfs_in_virtualzone] = 02 00 00 00 .
[    0.000000] (0x00) [z.xmatromfs_size] = 00 00 30 00 .
[    0.000000] (0x00) [z.xmatromfs_mm] = 00 00 00 00 .
[    0.000000] (0x00) [z.xmatromfs_save] = 00 00 00 00 .
[    0.000000] (0x00) [z.drm_keys_offset] = 00 00 14 00 .
[    0.000000] (0x00) [z.drm_keys_size] = 00 00 02 00 .
[    0.000000] (0x00) [z.drm_keys_in_virtualzone] = 01 00 00 00 .
[    0.000000] (0x00) [z.interactive_boot_idx_sel] = 01 00 00 00 .
[    0.000000] (0x00) [z.bootdev_order] = 00 .
[    0.000000] (0x00) [a.cs0_pblk_part1_offset] = 00 00 00 00 .
[    0.000000] (0x00) [a.cs0_pblk_part1_size] = 00 00 20 00 .
[    0.000000] (0x00) [a.cs0_pblk_part2_offset] = 00 00 20 00 .
[    0.000000] (0x00) [a.cs0_pblk_part2_size] = 00 00 30 00 .
[    0.000000] (0x00) [a.cs0_pblk_part3_offset] = 00 00 50 00 .
[    0.000000] (0x00) [a.cs0_pblk_part3_size] = 00 00 c0 00 .
[    0.000000] (0x00) [a.cs0_pblk_part4_offset] = 00 00 10 01 .
[    0.000000] (0x00) [a.cs0_pblk_part4_size] = 00 00 00 01 .
[    0.000000] (0x00) [a.cs0_pblk_part5_offset] = 00 00 10 02 .
[    0.000000] (0x00) [a.cs0_pblk_part5_size] = 00 00 f0 1d .
[    0.000000] (0x00) [a.cs0_pblk_parts] = 05 00 00 00 .
[    0.000000] (0x00) [a.cs0_pblk_part1_name] = 20 62 6f 6f 74 62 6c 6f 63 6b 73 00 .
[    0.000000] (0x00) [a.cs0_pblk_part2_name] = 20 78 6d 61 74 65 72 69 61 6c 00 .
[    0.000000] (0x00) [a.cs0_pblk_part3_name] = 20 69 6d 61 74 65 72 69 61 6c 00 .
[    0.000000] (0x00) [a.cs0_pblk_part4_name] = 20 73 79 73 74 65 6d 00 .
[    0.000000] (0x00) [a.cs0_pblk_part5_name] = 20 75 73 65 72 64 61 74 61 00 .
[    0.000000] (0x00) [a.linux_cmd] = 20 63 6f 6e 73 6f 6c 65 3d 74 74 79 53 30 20 6d 65 6d 3d 35 31 32 4d 40 30 78 38 30 30 30 30 30 30 30 20 6d 65 6d 3d 35 31 32 4d 40 30 78 63 30 30 30 30 30 30 30 00 .
[    0.000000] (0x00) [z.ruamm0_offset] = 00 00 00 20 .
[    0.000000] (0x00) [z.ruamm1_offset] = 00 00 00 20 .
[    0.000000] (0x00) [z.stage2_ga] = 00 00 00 80 .
[    0.000000] (0x00) [z.xos_public_mm] = 00 00 00 00 .
[    0.000000] (0x00) [z.log2_xos_public_size] = 11 00 00 00 .
[    0.000000] (0x00) [z.channel_index_mm] = 00 00 00 00 .
[    0.000000] (0x00) [z.ih_api_mm] = 00 00 00 00 .
[    0.000000] (0x00) [z.ios_mm] = 00 00 00 00 .
[    0.000000] (0x00) [z.ios_size] = 00 00 80 00 .
[    0.000000] (0x00) [z.splashscreen_enabled] = 01 00 00 00 .
[    0.000000] (0x00) [i.sp.scaler] = 02 00 01 00 .
[    0.000000] (0x00) [i.sp.digital_enable] = 01 00 00 00 .
[    0.000000] (0x00) [i.sp.component_enable] = 01 00 00 00 .
[    0.000000] (0x00) [i.sp.analog_enable] = 01 00 00 00 .
[    0.000000] (0x00) [i.sp.digital_standard] = 23 00 00 00 .
[    0.000000] (0x00) [i.sp.component_standard] = 65 00 00 00 .
[    0.000000] (0x00) [i.sp.analog_standard] = 7b 00 00 00 .
[    0.000000] (0x00) [i.sp.picture] = 73 70 6c 61 73 68 2e 73 64 64 00 .
[    0.000000] (0x00) [i.sp.hdmi_chip] = 01 00 00 00 .
[    0.000000] (0x00) [i.sp.animation_enable] = 01 00 00 00 .
[    0.000000] (0x00) [i.dac_mux0] = 0d 0c 0b 00 .
[    0.000000] (0x00) [a.ps.mt3_hs] = 24 20 00 01 01 03 00 00 01 04 00 00 1a 00 14 35 2b 13 65 45 21 00 01 00 1a 00 14 35 2b 13 65 45 21 00 01 00 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0
b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0b 0c 0c 0c 0c 80 80 80 80 7d 7f 7d 7f 05 05 05 05 05 05 05 05 0c 0c 0c 0c 80 80 80 80 7c 7c 7a 7a 05 05 05 05 05 05 05 05 .
[    0.000000] (0x00) [a.ps.pll2] = 00 00 00 00 .
[    0.000000] (0x00) [a.ps.pll0] = 00 00 00 00 .
[    0.000000] (0x00) [a.standby.mt3_hs] = 1f 80 00 01 01 00 00 00 01 04 00 00 .
[    0.000000] (0x00) [a.standby.pll2] = 00 00 00 00 .
[    0.000000] (0x00) [a.standby.pll0] = 00 00 00 00 .
[    0.000000] (0x00) [a.standby.gpio_dir] = 80 02 00 00 .
[    0.000000] (0x00) [a.standby.gpio_data] = 00 00 00 00 .
[    0.000000] (0x0f) [a.pm.flags] = 00 00 00 00 .
[    0.000000] (0x0f) [a.s1bl_origin] = 06 02 00 00 .
[    0.000000] (0x0f) [a.stage2_origin] = 00 00 00 00 .
[    0.000000] 122 records, 3214 bytes
[    0.000000] 
[    0.000000] SMP8xxx Enabled Devices under Linux/XENV 0xffd5c000 = 0x002303f8
[    0.000000]  Ethernet IR FIP I2CM I2CS SDIO SDIO1 USB SATA SCARD
[    0.000000] Machine: TANGOX_87XX
[    0.000000] bootconsole [early_ttyS0] enabled
[    0.000000] Ignoring RAM at c0000000-dfffffff (vmalloc region overlap).
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c0e92f40, node_mem_map c0eca000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130048 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 7 pages/cpu @c12cf000 s6144 r8192 d14336 u32768
[    0.000000] pcpu-alloc: s6144 r8192 d14336 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0 mem=512M@0x80000000 mem=512M@0xc0000000
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512MB = 512MB total
[    0.000000] Memory: 504572k/504572k available, 19716k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc03b0780   (3746 kB)
[    0.000000]       .init : 0xc03b1000 - 0xc0e66800   (10966 kB)
[    0.000000]       .data : 0xc0e68000 - 0xc0e94aa0   ( 179 kB)
[    0.000000]        .bss : 0xc0e94ac4 - 0xc0ec987c   ( 212 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.000000] tangox timer0: interrupt registered.
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.000000] Console: colour dummy device 80x30
[    0.020000] Calibrating delay loop... 1273.03 BogoMIPS (lpj=6365184)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] CPU: Testing write buffer coherency: ok
[    0.100000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.110000] Setting up static identity map for 0x802d9088 - 0x802d90bc
[    0.110000] L310 cache controller enabled
[    0.120000] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72860401, Cache size: 524288 B
[    0.230000] [68] boot_secondary
[    0.230000] CPU1: Booted secondary processor
[    0.270000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.270000] Brought up 2 CPUs
[    0.280000] SMP: Total of 2 processors activated (2886.86 BogoMIPS).
[    0.290000] devtmpfs: initialized
[    0.300000] NET: Registered protocol family 16
[    0.310000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.320000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.340000] bio: create slab <bio-0> at 0
[    0.350000] SCSI subsystem initialized
[    0.360000] libata version 3.00 loaded.
[    0.360000] [TANGOX-I2C] register bus driver(RegBase : 0x00010480, IRQ : 54)
[    0.380000] Switching to clocksource tangox_xtal_timer
[    0.390000] NET: Registered protocol family 2
[    0.390000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.400000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.400000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
[    0.410000] TCP: Hash tables configured (established 16384 bind 16384)
[    0.420000] TCP: reno registered
[    0.420000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.430000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.430000] NET: Registered protocol family 1
[    0.440000] RPC: Registered named UNIX socket transport module.
[    0.440000] RPC: Registered udp transport module.
[    0.450000] RPC: Registered tcp transport module.
[    0.450000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    6.780000] NetWinder Floating Point Emulator V0.97 (double precision)
[    6.790000] registering mbus interrupt routines.
[    6.800000] SMP8xxx zxenv (254:0): driver loaded.
[    6.800000] NFS: Registering the id_resolver key type
[    6.810000] ROMFS MTD (C) 2007 Red Hat, Inc.
[    6.810000] fuse init (API version 7.18)
[    6.820000] msgmni has been set to 985
[    6.830000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    6.840000] io scheduler noop registered
[    6.840000] io scheduler deadline registered
[    6.850000] io scheduler cfq registered (default)
[    6.850000] [tangox-gpio] GPIO List : 0,1,2,3,4,5,6,7,8,9,10,11,12*,13*,14*,15*,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,7
6,77,78
[    6.880000] gpiochip_add: registered GPIOs 0 to 78 on device: tangox-gpio
[    6.880000] [tangox-gpio] TangoX GPIO driver is registered
[    6.940000] tangox-uart.0: ttyS0 at MMIO 0x10700 (irq = 33) is a tangox-uart.0
[    6.950000] console [ttyS0] enabled, bootconsole disabled
[    6.950000] console [ttyS0] enabled, bootconsole disabled
[    6.960000] tangox-uart.1: ttyS1 at MMIO 0x6c200 (irq = 34) is a tangox-uart.1
[    6.970000] tangox-uart.2: ttyS2 at MMIO 0x6cd00 (irq = 95) is a tangox-uart.2
[    6.980000] [tangox-dspbridge] Silicon Info
[    6.980000]     Partname                   : SMP8759AB0(8758:0001)
[    6.990000]     XOS Version                : 0x43
[    6.990000]     Stage 0 Bootloader Version : 0x92
[    7.000000]     Stage 1 Bootloader Version : 0x23
[    7.000000]     Serial                     : a9ac846823df7118dea0b7d41a565095
[    7.010000]     Config ID                  : 0x87580001
[    7.010000]     Type                       : FACS
[    7.020000]     IPToken                    : 0x00000000
[    7.020000] [tangox-dspbridge] SMP8xxx tangox-dspbridge (252:0): driver loaded
[    7.030000] loop: module loaded
[    7.040000] tangox-enet tangox-enet.0: MII Bus : TANGOX (RG)MII bus
[    7.050000] tangox-enet tangox-enet.0: Phy reset : System Reset
[    7.060000] tangox-mii: probed
[    7.060000] tangox-enet tangox-enet.0: found phy(id = 4), tangox-enet-0:04 : Atheros 8035 ethernet
[    7.070000] tangox-enet tangox-enet.0: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=tangox-enet-0:04, irq=-1)
[    7.090000] tangox-enet tangox-enet.0: mac address 74:cc:42:ec:53:16
[    7.090000] tangox-enet tangox-enet.0: Ethernet driver for SMP8xxx internal MAC core 1000Mbps Base at 0x26000
[    7.100000] i2c /dev entries driver
[    7.110000] tangox-thermal tangox-thermal.0: Cooling device registered: thermal-cpufreq-0
[    7.120000] tangox-thermal tangox-thermal.0: sensor(HEVC-temp-sensor : 0) is registered
[    7.130000] tangox-thermal tangox-thermal.1: Cooling device registered: thermal-cpufreq-1
[    7.130000] tangox-thermal tangox-thermal.1: sensor(CPU-temp-sensor : 1) is registered
[    7.140000] tangox-thermal tangox-thermal.2: Cooling device registered: thermal-cpufreq-2
[    7.150000] tangox-thermal tangox-thermal.2: sensor(PCIe-temp-sensor : 2) is registered
[    7.160000] tangoxdog: Hardware Watchdog Timer for SMP8xxx 0.2 (def. timeout: 30 sec)
[    7.170000] TCP: cubic registered
[    7.170000] NET: Registered protocol family 17
[    7.170000] Registering the dns_resolver key type
[    7.180000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    7.190000] ThumbEE CPU extension supported.
[    7.190000] Warning: unable to open an initial console.
[    7.210000] Freeing init memory: 10964K
Starting logging: OK
Populating /dev using udev: [   67.540000] udevd[855]: starting version 1.5.3
[   67.780000] tangox-spi tangox-spi: at 0x0006c400 (irq 94, FIFOs size 1024)
done
Starting watchdog...
[   67.830000] tangoxdog: Started watchdog timer.
[   67.840000] tangoxdog: Started watchdog timer.
Initializing random number generator... done.
Starting network...
Check Boot Device Partition Name...
Boot Device is not defined

Welcome!
Sisteron login: [   69.070000] tangox-enet.0: link up (1000 Mbps - Full Duplex)
root
[root@Sisteron ~]# mount 0a
mount: can't find 0a in /etc/fstab
[root@Sisteron ~]# mount -a
[root@Sisteron ~]# cd /mrua/
[root@Sisteron mrua]# source run.env 
/ /mrua
/mrua
Creating /dev/mum0
Creating /dev/em8xxx0
Loading '/mrua/fw/llad.ko'
[   82.270000] llad: module license 'LGPL' taints kernel.
[   82.270000] Disabling lock debugging due to kernel taint
Chip identified as SMP8758 rev=1 prod (certificate id unused)
[root@Sisteron mrua]# fw_reload
Loading '/mrua/fw/llad.ko'
/mrua/bin/xkc
Unloading ios
ikc: Cannot open CHANNEL_IOS_API_C2I
WARNING: could not pause ios but going ahead
Stopping audio0... OK
Stopping audio1... FAILED
Stopping audio2... FAILED
Stopping video0... OK
Stopping video1... OK
Stopping demux0... OK
Stopping demux1... FAILED
Unloading of demuxpsf ucode... FAILED
Unloading of audio ucode... FAILED
Unloading of video ucode... FAILED
Unloading of video h265 ucode... FAILED
config_byte decimal=0 noreal nodts dd
Will try to use:
  Video XLOAD = /mrua/mruafw/video_microcode_SMP8758_prod_noreal.xload3
  Audio XLOAD = /mrua/mruafw/audio_microcode_SMP8758_prod_nodts_dd.xload3
  Demux XLOAD = /mrua/mruafw/demuxpsf_microcode_SMP8758_prod.xload3
Using scratch=0xbe5c4854
Loading video ucode
Loading audio ucode
Loading demuxpsf ucode
Starting demux0
Starting demux1
   starting demux1 failed. 864x, 8652, 8670, 868x, 87xx have no demux1.
Starting video0
Starting video1
Starting audio0
Starting audio1
   starting audio1 failed. 8652, 8654, 8670, 868x have no audio1.
Starting audio2
   starting audio2 failed. 8652, 8654, 8670, 868x have no audio2.
  IOS   XLOAD = /mrua/mruafw/ios.bin.gz_SMP8758_prod.xload3
Loading and starting display handler
/mrua/bin/genxenv2
/mrua/bin/gbus_read_bin_to_file
ios_ga=0xbe800000, ios_size=0x00800000, log2_ios=22
To ga=0xbec00000
ipu heartbeat alive
Loading '/mrua/fw/smp8xxxfw.ko'
[   91.080000] smp8xxxfw: CONFIG_SUSPEND not defined in kernel.
Loading '/mrua/fw/em8xxx.ko'
[   91.270000] mumk_register_tasklet: (0) tasklet e0d61000 status @bf0ce394
demux0   is  alive
audio0   is  alive
mpeg0    is  alive
mpeg1    is  alive
ipu      is  alive
ih       is  alive
firmware reload successful
[root@Sisteron mrua]#