Etn40ff/boot_log

## boot_log
U-Boot 2013.10-rc3-g0e9241b (Jan 18 2015 - 19:09:05)

Board: ci20 (Ingenic XBurst JZ4780 SoC)
DRAM:  1 GiB
NAND:  8192 MiB
MMC:   jz_mmc msc1: 0
In:    eserial4
Out:   eserial4
Err:   eserial4
Net:   dm9000
Hit any key to stop autoboot:  0
ci20# printenv
baudrate=115200
board_date=20140705
board_mfr=NP�1�NP
bootargs=console=ttyS4,115200 console=tty0 mem=256M@0x0 mem=768M@0x30000000 root=/dev/mmcblk0p1 rootwait rw
bootcmd=ext4load mmc 0:1 0x88000000 /boot/uImage; bootm 0x88000000
bootdelay=2
ethact=dm9000
ethaddr=d0:31:10:ff:7f:05
loads_echo=1
serial#=1740
stderr=eserial0,eserial4
stdin=eserial0,eserial4
stdout=eserial0,eserial4

Environment size: 411/32764 bytes
ci20# ext4load mmc 0:1 0x88000000 /boot/uImage-3.18; bootm 0x88000000
3907309 bytes read in 614 ms (6.1 MiB/s)
## Booting kernel from Legacy Image at 88000000 ...
   Image Name:   Linux-3.18.3+
   Image Type:   MIPS Linux Kernel Image (gzip compressed)
   Data Size:    3907245 Bytes = 3.7 MiB
   Load Address: 80010000
   Entry Point:  805bc230
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.3+ (VulK@nightshade) (gcc version 4.8.3 (Gentoo 4.8.3 p1.1, pie-0.5.9) ) #2 PREEMPT Sat Jan 24 13:32:07 EST 2015
[    0.000000] CPU0 revision is: 3ee1024f (Ingenic JZRISC)
[    0.000000] FPU revision is: 00330000
[    0.000000] MIPS: machine is imgtec,ci20
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 10000000 @ 00000000 (usable)
[    0.000000]  memory: 30000000 @ 30000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 10000000 @ 00000000 (usable)
[    0.000000]  memory: 30000000 @ 30000000 (usable)
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x1fffffff]
[    0.000000]   HighMem  [mem 0x20000000-0x5fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x0fffffff]
[    0.000000]   node   0: [mem 0x30000000-0x5fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x5fffffff]
[    0.000000] cma: Reserved 64 MiB at 0x0c000000
[    0.000000] Primary instruction cache 32kB, VIPT, 8-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261120
[    0.000000] Kernel command line: console=ttyS4,115200 console=tty0 mem=256M@0x0 mem=768M@0x30000000 root=/dev/mmcblk0p1 rootwait rw console=ttyS4,115200 clk_ignore_unused
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] allocated 3145728 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 958964K/1048576K available (5850K kernel code, 225K rwdata, 1864K rodata, 240K init, 139K bss, 89612K reserved, 786432K highmem)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:222
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.040000] Calibrating delay loop... 956.00 BogoMIPS (lpj=4780032)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040000] Initializing cgroup subsys memory
[    0.040000] Initializing cgroup subsys devices
[    0.040000] Initializing cgroup subsys freezer
[    0.040000] devtmpfs: initialized
[    0.040000] pinctrl core: initialized pinctrl subsystem
[    0.040000] regulator-dummy: no parameters
[    0.040000] NET: Registered protocol family 16
[    0.100000] jz4780-dma 13420000.dma: JZ4780 DMA controller initialised
[    0.100000] eth0_power: no parameters
[    0.100000] hdmi_power: no parameters
[    0.100000] wifi_power_gpio: 3300 mV
[    0.100000] wifi_reset_gpio: no parameters
[    0.100000] bt_reset_gpio: no parameters
[    0.100000] bt_reg_on_gpio: no parameters
[    0.100000] bt_wake_gpio: no parameters
[    0.100000] SCSI subsystem initialized
[    0.100000] usbcore: registered new interface driver usbfs
[    0.100000] usbcore: registered new interface driver hub
[    0.100000] usbcore: registered new device driver usb
[    0.100000] jz47xx-nemc 13410000.nemc: JZ4780 NEMC initialised
[    0.100000] Advanced Linux Sound Architecture Driver Initialized.
[    0.100000] Bluetooth: Core ver 2.19
[    0.100000] NET: Registered protocol family 31
[    0.100000] Bluetooth: HCI device and connection manager initialized
[    0.100000] Bluetooth: HCI socket layer initialized
[    0.100000] Bluetooth: L2CAP socket layer initialized
[    0.100000] Bluetooth: SCO socket layer initialized
[    0.100000] cfg80211: Calling CRDA to update world regulatory domain
[    0.100000] Switched to clocksource jz4740-timer
[    0.110000] NET: Registered protocol family 2
[    0.110000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.110000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.110000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.110000] TCP: reno registered
[    0.110000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.110000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.110000] NET: Registered protocol family 1
[    0.110000] RPC: Registered named UNIX socket transport module.
[    0.110000] RPC: Registered udp transport module.
[    0.110000] RPC: Registered tcp transport module.
[    0.110000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.110000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.110000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.110000] msgmni has been set to 464
[    0.120000] bounce: pool size: 64 pages
[    0.120000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.120000] io scheduler noop registered
[    0.120000] io scheduler deadline registered
[    0.120000] io scheduler cfq registered (default)
[    0.120000] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    0.120000] of_serial 10030000.serial: ttyS0 at MMIO 0x10030000 (irq = 59, base_baud = 3000000) is a Ingenic jz4780 UART
[    0.120000] of_serial 10031000.serial: ttyS1 at MMIO 0x10031000 (irq = 58, base_baud = 3000000) is a Ingenic jz4780 UART
[    0.120000] of_serial 10032000.serial: ttyS2 at MMIO 0x10032000 (irq = 57, base_baud = 3000000) is a Ingenic jz4780 UART
[    0.120000] of_serial 10033000.serial: ttyS3 at MMIO 0x10033000 (irq = 56, base_baud = 3000000) is a Ingenic jz4780 UART
[    0.120000] console [ttyS4] disabled
[    0.120000] of_serial 10034000.serial: ttyS4 at MMIO 0x10034000 (irq = 42, base_baud = 3000000) is a Ingenic jz4780 UART
[    0.650000] console [ttyS4] enabled
[    0.650000] [drm] Initialized drm 1.1.0 20060810
[    0.660000] platform 10180000.jz4780-hdmi3: Driver dwc-hdmi requests probe deferral
[    0.660000] platform 13050000.jz4780-lcdk: Driver jz4780_drm requests probe deferral
[    0.670000] platform 1b000000.nand: Driver jz4780-nand requests probe deferral
[    0.680000] jz4780-bch 134d0000.bch: JZ4780 BCH initialised
[    0.730000] dm9000 16000000.dm9000: eth%d: Invalid ethernet MAC address. Please set using ifconfig
[    0.730000] eth0: dm9000b at b6000000,b6000002 IRQ 219 MAC: 2e:74:f1:a5:e3:c2 (random)
[    1.690000] dwc2-jz4780 13500000.jz4780-otg: DWC OTG Controller
[    1.690000] dwc2-jz4780 13500000.jz4780-otg: new USB bus registered, assigned bus number 1
[    1.700000] dwc2-jz4780 13500000.jz4780-otg: irq 29, io mem 0x00000000
[    1.710000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.710000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.720000] usb usb1: Product: DWC OTG Controller
[    1.730000] usb usb1: Manufacturer: Linux 3.18.3+ dwc2_hsotg
[    1.730000] usb usb1: SerialNumber: 13500000.jz4780-otg
[    1.740000] hub 1-0:1.0: USB hub found
[    1.740000] hub 1-0:1.0: 1 port detected
[    1.740000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.750000] ehci-platform: EHCI generic platform driver
[    1.760000] jz4780-ehci 13490000.jz4780-ehci: EHCI Host Controller
[    1.760000] jz4780-ehci 13490000.jz4780-ehci: new USB bus registered, assigned bus number 2
[    1.770000] jz4780-ehci 13490000.jz4780-ehci: irq 28, io mem 0x13490000
[    1.800000] jz4780-ehci 13490000.jz4780-ehci: USB 2.0 started, EHCI 1.00
[    1.800000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.810000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.820000] usb usb2: Product: EHCI Host Controller
[    1.820000] usb usb2: Manufacturer: Linux 3.18.3+ ehci_hcd
[    1.830000] usb usb2: SerialNumber: 13490000.jz4780-ehci
[    1.830000] hub 2-0:1.0: USB hub found
[    1.840000] hub 2-0:1.0: 1 port detected
[    1.840000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.850000] 134a0000.jz4780-ohci supply vbus not found, using dummy regulator
[    1.850000] jz4740-ohci 134a0000.jz4780-ohci: JZ4740 OHCI
[    1.860000] jz4740-ohci 134a0000.jz4780-ohci: new USB bus registered, assigned bus number 3
[    1.870000] jz4740-ohci 134a0000.jz4780-ohci: irq 13, io mem 0x134a0000
[    1.930000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.940000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.940000] usb usb3: Product: JZ4740 OHCI
[    1.950000] usb usb3: Manufacturer: Linux 3.18.3+ ohci_hcd
[    1.950000] usb usb3: SerialNumber: jz4740
[    1.960000] hub 3-0:1.0: USB hub found
[    1.960000] hub 3-0:1.0: 1 port detected
[    1.970000] ohci-platform: OHCI generic platform driver
[    1.970000] usbcore: registered new interface driver usb-storage
[    1.980000] usbcore: registered new interface driver usbserial
[    1.980000] usbcore: registered new interface driver pl2303
[    1.990000] usbserial: USB Serial support registered for pl2303
[    2.000000] jz4740-rtc 10003000.rtcdev: rtc core: registered 10003000.rtcdev as rtc0
[    2.000000] jz4780-i2c 10050000.i2c0: Bus frequency is 100 KHz
[    2.010000] vcore1v2: 1000 <--> 1400 mV at 1200 mV
[    2.020000] vddmem1v5: 1500 mV
[    2.020000] vccio3v3: 3300 mV
[    2.030000] SUDCDC_REG4: at 5000 mV
[    2.030000] vcc2.5: 2500 mV
[    2.040000] vwifi3v3: 3300 mV
[    2.040000] vcim2v8: 2800 mV
[    2.050000] vcim1v5: 1500 mV
[    2.050000] vrtc1v8: 1800 mV
[    2.050000] vrtc1v2: 1200 mV
[    2.060000] VBUS: no parameters
[    2.060000] USB_CHARGER: at 400 mA
[    2.070000] jz4780-i2c 10051000.i2c1: Bus frequency is 100 KHz
[    2.070000] jz4780-i2c 10052000.i2c2: Bus frequency is 100 KHz
[    2.080000] jz4780-i2c 10053000.i2c3: Bus frequency is 100 KHz
[    2.080000] jz4780-i2c 10054000.i2c4: Bus frequency is 100 KHz
[    2.090000] Bluetooth: HCI UART driver ver 2.2
[    2.090000] Bluetooth: HCI H4 protocol initialized
[    2.100000] jz47xx-mmc 13450000.msc: Got CD GPIO
[    2.100000] jz47xx-mmc 13450000.msc: No vmmc regulator found
[    2.110000] jz47xx-mmc 13450000.msc: No vqmmc regulator found
[    2.140000] usb 1-1: new high-speed USB device number 2 using dwc2-jz4780
[    2.160000] jz47xx-mmc 13450000.msc: JZ SD/MMC card driver registered
[    2.160000] jz47xx-mmc 13460000.msc: No vqmmc regulator found
[    2.170000] random: nonblocking pool is initialized
	U-Boot 2013.10-rc3-g0e9241b (Jan 18 2015 - 19:09:05)

	Board: ci20 (Ingenic XBurst JZ4780 SoC)
	DRAM: 1 GiB
	NAND: 8192 MiB
	MMC: jz_mmc msc1: 0
	In: eserial4
	Out: eserial4
	Err: eserial4
	Net: dm9000
	Hit any key to stop autoboot: 0
	ci20# printenv
	baudrate=115200
	board_date=20140705
	board_mfr=NP�1�NP
	bootargs=console=ttyS4,115200 console=tty0 mem=256M@0x0 mem=768M@0x30000000 root=/dev/mmcblk0p1 rootwait rw
	bootcmd=ext4load mmc 0:1 0x88000000 /boot/uImage; bootm 0x88000000
	bootdelay=2
	ethact=dm9000
	ethaddr=d0:31:10:ff:7f:05
	loads_echo=1
	serial#=1740
	stderr=eserial0,eserial4
	stdin=eserial0,eserial4
	stdout=eserial0,eserial4

	Environment size: 411/32764 bytes
	ci20# ext4load mmc 0:1 0x88000000 /boot/uImage-3.18; bootm 0x88000000
	3907309 bytes read in 614 ms (6.1 MiB/s)
	## Booting kernel from Legacy Image at 88000000 ...
	Image Name: Linux-3.18.3+
	Image Type: MIPS Linux Kernel Image (gzip compressed)
	Data Size: 3907245 Bytes = 3.7 MiB
	Load Address: 80010000
	Entry Point: 805bc230
	Verifying Checksum ... OK
	Uncompressing Kernel Image ... OK

	Starting kernel ...

	[ 0.000000] Initializing cgroup subsys cpuset
	[ 0.000000] Initializing cgroup subsys cpu
	[ 0.000000] Initializing cgroup subsys cpuacct
	[ 0.000000] Linux version 3.18.3+ (VulK@nightshade) (gcc version 4.8.3 (Gentoo 4.8.3 p1.1, pie-0.5.9) ) #2 PREEMPT Sat Jan 24 13:32:07 EST 2015
	[ 0.000000] CPU0 revision is: 3ee1024f (Ingenic JZRISC)
	[ 0.000000] FPU revision is: 00330000
	[ 0.000000] MIPS: machine is imgtec,ci20
	[ 0.000000] Determined physical RAM map:
	[ 0.000000] memory: 10000000 @ 00000000 (usable)
	[ 0.000000] memory: 30000000 @ 30000000 (usable)
	[ 0.000000] User-defined physical RAM map:
	[ 0.000000] memory: 10000000 @ 00000000 (usable)
	[ 0.000000] memory: 30000000 @ 30000000 (usable)
	[ 0.000000] Zone ranges:
	[ 0.000000] Normal [mem 0x00000000-0x1fffffff]
	[ 0.000000] HighMem [mem 0x20000000-0x5fffffff]
	[ 0.000000] Movable zone start for each node
	[ 0.000000] Early memory node ranges
	[ 0.000000] node 0: [mem 0x00000000-0x0fffffff]
	[ 0.000000] node 0: [mem 0x30000000-0x5fffffff]
	[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5fffffff]
	[ 0.000000] cma: Reserved 64 MiB at 0x0c000000
	[ 0.000000] Primary instruction cache 32kB, VIPT, 8-way, linesize 32 bytes.
	[ 0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
	[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
	[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261120
	[ 0.000000] Kernel command line: console=ttyS4,115200 console=tty0 mem=256M@0x0 mem=768M@0x30000000 root=/dev/mmcblk0p1 rootwait rw console=ttyS4,115200 clk_ignore_unused
	[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
	[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
	[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
	[ 0.000000] allocated 3145728 bytes of page_cgroup
	[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
	[ 0.000000] Memory: 958964K/1048576K available (5850K kernel code, 225K rwdata, 1864K rodata, 240K init, 139K bss, 89612K reserved, 786432K highmem)
	[ 0.000000] Preemptible hierarchical RCU implementation.
	[ 0.000000] NR_IRQS:222
	[ 0.000000] Console: colour dummy device 80x25
	[ 0.000000] console [tty0] enabled
	[ 0.040000] Calibrating delay loop... 956.00 BogoMIPS (lpj=4780032)
	[ 0.040000] pid_max: default: 32768 minimum: 301
	[ 0.040000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
	[ 0.040000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
	[ 0.040000] Initializing cgroup subsys memory
	[ 0.040000] Initializing cgroup subsys devices
	[ 0.040000] Initializing cgroup subsys freezer
	[ 0.040000] devtmpfs: initialized
	[ 0.040000] pinctrl core: initialized pinctrl subsystem
	[ 0.040000] regulator-dummy: no parameters
	[ 0.040000] NET: Registered protocol family 16
	[ 0.100000] jz4780-dma 13420000.dma: JZ4780 DMA controller initialised
	[ 0.100000] eth0_power: no parameters
	[ 0.100000] hdmi_power: no parameters
	[ 0.100000] wifi_power_gpio: 3300 mV
	[ 0.100000] wifi_reset_gpio: no parameters
	[ 0.100000] bt_reset_gpio: no parameters
	[ 0.100000] bt_reg_on_gpio: no parameters
	[ 0.100000] bt_wake_gpio: no parameters
	[ 0.100000] SCSI subsystem initialized
	[ 0.100000] usbcore: registered new interface driver usbfs
	[ 0.100000] usbcore: registered new interface driver hub
	[ 0.100000] usbcore: registered new device driver usb
	[ 0.100000] jz47xx-nemc 13410000.nemc: JZ4780 NEMC initialised
	[ 0.100000] Advanced Linux Sound Architecture Driver Initialized.
	[ 0.100000] Bluetooth: Core ver 2.19
	[ 0.100000] NET: Registered protocol family 31
	[ 0.100000] Bluetooth: HCI device and connection manager initialized
	[ 0.100000] Bluetooth: HCI socket layer initialized
	[ 0.100000] Bluetooth: L2CAP socket layer initialized
	[ 0.100000] Bluetooth: SCO socket layer initialized
	[ 0.100000] cfg80211: Calling CRDA to update world regulatory domain
	[ 0.100000] Switched to clocksource jz4740-timer
	[ 0.110000] NET: Registered protocol family 2
	[ 0.110000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
	[ 0.110000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
	[ 0.110000] TCP: Hash tables configured (established 2048 bind 2048)
	[ 0.110000] TCP: reno registered
	[ 0.110000] UDP hash table entries: 256 (order: 0, 4096 bytes)
	[ 0.110000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
	[ 0.110000] NET: Registered protocol family 1
	[ 0.110000] RPC: Registered named UNIX socket transport module.
	[ 0.110000] RPC: Registered udp transport module.
	[ 0.110000] RPC: Registered tcp transport module.
	[ 0.110000] RPC: Registered tcp NFSv4.1 backchannel transport module.
	[ 0.110000] futex hash table entries: 256 (order: -1, 3072 bytes)
	[ 0.110000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
	[ 0.110000] msgmni has been set to 464
	[ 0.120000] bounce: pool size: 64 pages
	[ 0.120000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
	[ 0.120000] io scheduler noop registered
	[ 0.120000] io scheduler deadline registered
	[ 0.120000] io scheduler cfq registered (default)
	[ 0.120000] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
	[ 0.120000] of_serial 10030000.serial: ttyS0 at MMIO 0x10030000 (irq = 59, base_baud = 3000000) is a Ingenic jz4780 UART
	[ 0.120000] of_serial 10031000.serial: ttyS1 at MMIO 0x10031000 (irq = 58, base_baud = 3000000) is a Ingenic jz4780 UART
	[ 0.120000] of_serial 10032000.serial: ttyS2 at MMIO 0x10032000 (irq = 57, base_baud = 3000000) is a Ingenic jz4780 UART
	[ 0.120000] of_serial 10033000.serial: ttyS3 at MMIO 0x10033000 (irq = 56, base_baud = 3000000) is a Ingenic jz4780 UART
	[ 0.120000] console [ttyS4] disabled
	[ 0.120000] of_serial 10034000.serial: ttyS4 at MMIO 0x10034000 (irq = 42, base_baud = 3000000) is a Ingenic jz4780 UART
	[ 0.650000] console [ttyS4] enabled
	[ 0.650000] [drm] Initialized drm 1.1.0 20060810
	[ 0.660000] platform 10180000.jz4780-hdmi3: Driver dwc-hdmi requests probe deferral
	[ 0.660000] platform 13050000.jz4780-lcdk: Driver jz4780_drm requests probe deferral
	[ 0.670000] platform 1b000000.nand: Driver jz4780-nand requests probe deferral
	[ 0.680000] jz4780-bch 134d0000.bch: JZ4780 BCH initialised
	[ 0.730000] dm9000 16000000.dm9000: eth%d: Invalid ethernet MAC address. Please set using ifconfig
	[ 0.730000] eth0: dm9000b at b6000000,b6000002 IRQ 219 MAC: 2e:74:f1:a5:e3:c2 (random)
	[ 1.690000] dwc2-jz4780 13500000.jz4780-otg: DWC OTG Controller
	[ 1.690000] dwc2-jz4780 13500000.jz4780-otg: new USB bus registered, assigned bus number 1
	[ 1.700000] dwc2-jz4780 13500000.jz4780-otg: irq 29, io mem 0x00000000
	[ 1.710000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
	[ 1.710000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
	[ 1.720000] usb usb1: Product: DWC OTG Controller
	[ 1.730000] usb usb1: Manufacturer: Linux 3.18.3+ dwc2_hsotg
	[ 1.730000] usb usb1: SerialNumber: 13500000.jz4780-otg
	[ 1.740000] hub 1-0:1.0: USB hub found
	[ 1.740000] hub 1-0:1.0: 1 port detected
	[ 1.740000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
	[ 1.750000] ehci-platform: EHCI generic platform driver
	[ 1.760000] jz4780-ehci 13490000.jz4780-ehci: EHCI Host Controller
	[ 1.760000] jz4780-ehci 13490000.jz4780-ehci: new USB bus registered, assigned bus number 2
	[ 1.770000] jz4780-ehci 13490000.jz4780-ehci: irq 28, io mem 0x13490000
	[ 1.800000] jz4780-ehci 13490000.jz4780-ehci: USB 2.0 started, EHCI 1.00
	[ 1.800000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
	[ 1.810000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
	[ 1.820000] usb usb2: Product: EHCI Host Controller
	[ 1.820000] usb usb2: Manufacturer: Linux 3.18.3+ ehci_hcd
	[ 1.830000] usb usb2: SerialNumber: 13490000.jz4780-ehci
	[ 1.830000] hub 2-0:1.0: USB hub found
	[ 1.840000] hub 2-0:1.0: 1 port detected
	[ 1.840000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
	[ 1.850000] 134a0000.jz4780-ohci supply vbus not found, using dummy regulator
	[ 1.850000] jz4740-ohci 134a0000.jz4780-ohci: JZ4740 OHCI
	[ 1.860000] jz4740-ohci 134a0000.jz4780-ohci: new USB bus registered, assigned bus number 3
	[ 1.870000] jz4740-ohci 134a0000.jz4780-ohci: irq 13, io mem 0x134a0000
	[ 1.930000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
	[ 1.940000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
	[ 1.940000] usb usb3: Product: JZ4740 OHCI
	[ 1.950000] usb usb3: Manufacturer: Linux 3.18.3+ ohci_hcd
	[ 1.950000] usb usb3: SerialNumber: jz4740
	[ 1.960000] hub 3-0:1.0: USB hub found
	[ 1.960000] hub 3-0:1.0: 1 port detected
	[ 1.970000] ohci-platform: OHCI generic platform driver
	[ 1.970000] usbcore: registered new interface driver usb-storage
	[ 1.980000] usbcore: registered new interface driver usbserial
	[ 1.980000] usbcore: registered new interface driver pl2303
	[ 1.990000] usbserial: USB Serial support registered for pl2303
	[ 2.000000] jz4740-rtc 10003000.rtcdev: rtc core: registered 10003000.rtcdev as rtc0
	[ 2.000000] jz4780-i2c 10050000.i2c0: Bus frequency is 100 KHz
	[ 2.010000] vcore1v2: 1000 <--> 1400 mV at 1200 mV
	[ 2.020000] vddmem1v5: 1500 mV
	[ 2.020000] vccio3v3: 3300 mV
	[ 2.030000] SUDCDC_REG4: at 5000 mV
	[ 2.030000] vcc2.5: 2500 mV
	[ 2.040000] vwifi3v3: 3300 mV
	[ 2.040000] vcim2v8: 2800 mV
	[ 2.050000] vcim1v5: 1500 mV
	[ 2.050000] vrtc1v8: 1800 mV
	[ 2.050000] vrtc1v2: 1200 mV
	[ 2.060000] VBUS: no parameters
	[ 2.060000] USB_CHARGER: at 400 mA
	[ 2.070000] jz4780-i2c 10051000.i2c1: Bus frequency is 100 KHz
	[ 2.070000] jz4780-i2c 10052000.i2c2: Bus frequency is 100 KHz
	[ 2.080000] jz4780-i2c 10053000.i2c3: Bus frequency is 100 KHz
	[ 2.080000] jz4780-i2c 10054000.i2c4: Bus frequency is 100 KHz
	[ 2.090000] Bluetooth: HCI UART driver ver 2.2
	[ 2.090000] Bluetooth: HCI H4 protocol initialized
	[ 2.100000] jz47xx-mmc 13450000.msc: Got CD GPIO
	[ 2.100000] jz47xx-mmc 13450000.msc: No vmmc regulator found
	[ 2.110000] jz47xx-mmc 13450000.msc: No vqmmc regulator found
	[ 2.140000] usb 1-1: new high-speed USB device number 2 using dwc2-jz4780
	[ 2.160000] jz47xx-mmc 13450000.msc: JZ SD/MMC card driver registered
	[ 2.160000] jz47xx-mmc 13460000.msc: No vqmmc regulator found
	[ 2.170000] random: nonblocking pool is initialized