ISMP 645 Xen 2.0.4

xm_dmesg_ismp.txt

ERROR: cannot use unconfigured serial port COM1
 __  __            ____    ___  _  _
 \ \/ /___ _ __   |___ \  / _ \| || |
  \  // _ \ '_ \    __) || | | | || |_
  /  \  __/ | | |  / __/ | |_| |__   _|
 /_/\_\___|_| |_| |_____(_)___(_) |_|

 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 2.0.4 (xenod@cl.cam.ac.uk) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) Fri Feb  4 13:05:34 GMT 2005
 Latest ChangeSet: 2005/02/04 13:01:10 1.1715 42037216PTjBGQVeEeiwiYxP_vJuyw

(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009fc00 (usable)
(XEN)  000000000009fc00 - 00000000000a0000 (reserved)
(XEN)  0000000000100000 - 0000000040000000 (usable)
(XEN)  00000000fec00000 - 00000000fec01000 (reserved)
(XEN)  00000000fee00000 - 00000000fee01000 (reserved)
(XEN)  00000000fffe0000 - 0000000100000000 (reserved)
(XEN) System RAM: 1023MB (1048188kB)
(XEN) Xen heap: 10MB (10768kB)
(XEN) CPU0: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0000fbff 00000000 00000000 00000000
(XEN) found SMP MP-table at 000fbc70
(XEN) ACPI: Unable to locate RSDP
(XEN) Intel MultiProcessor Specification v1.1
(XEN)     Virtual Wire compatibility mode.
(XEN) OEM ID: INGR     Product ID: TD-x10       APIC at: 0xFEE00000
(XEN) Processor #3 Pentium(tm) Pro APIC version 17
(XEN) Processor #0 Pentium(tm) Pro APIC version 17
(XEN) Processor #1 Pentium(tm) Pro APIC version 17
(XEN) Processor #2 Pentium(tm) Pro APIC version 17
(XEN) I/O APIC #14 Version 17 at 0xFEC00000.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Processors: 4
(XEN) Using scheduler: Borrowed Virtual Time (bvt)
(XEN) Initializing CPU#0
(XEN) Detected 199.938 MHz processor.
(XEN) CPU0: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0000fbff 00000000 00000000 00000000
(XEN) CPU0 booted
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) Booting processor 1/0 eip 90000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU1: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0000fbff 00000000 00000000 00000000
(XEN) CPU1 has booted.
(XEN) Booting processor 2/1 eip 90000
(XEN) Initializing CPU#2
(XEN) masked ExtINT on CPU#2
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU2: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0000fbff 00000000 00000000 00000000
(XEN) CPU2 has booted.
(XEN) Booting processor 3/2 eip 90000
(XEN) Initializing CPU#3
(XEN) masked ExtINT on CPU#3
(XEN) ESR value before enabling vector: 00000000
(XEN) ESR value after enabling vector: 00000000
(XEN) CPU3: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
(XEN) CPU caps: 0000fbff 00000000 00000000 00000000
(XEN) CPU3 has booted.
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) Setting 14 in the phys_id_present_map
(XEN) ...changing IO-APIC physical APIC ID to 14 ... ok.
(XEN) init IO_APIC IRQs
(XEN) ..TIMER: vector=0x41 pin1=2 pin2=-1
(XEN) Using local APIC timer interrupts.
(XEN) Calibrating APIC timer for CPU0...
(XEN) ..... CPU speed is 199.9379 MHz.
(XEN) ..... Bus speed is 66.6457 MHz.
(XEN) ..... bus_scale = 0x0000443F
(XEN) checking TSC synchronization across CPUs:
(XEN) BIOS BUG: CPU#0 improperly initialized, has -5625065 usecs TSC skew! FIXED.
(XEN) BIOS BUG: CPU#1 improperly initialized, has 1875006 usecs TSC skew! FIXED.
(XEN) BIOS BUG: CPU#2 improperly initialized, has 1875006 usecs TSC skew! FIXED.
(XEN) BIOS BUG: CPU#3 improperly initialized, has 1875052 usecs TSC skew! FIXED.
(XEN) Time init:
(XEN) .... System Time: 61521496ns
(XEN) .... cpu_freq:    00000000:0BEAD250
(XEN) .... scale:       00000005:00649025
(XEN) .... Wall Clock:  1113433010s 210000us
(XEN) PCI: PCI BIOS revision 2.10 entry at 0xf6741, last bus=1
(XEN) PCI: Using configuration type 1
(XEN) PCI: Probing PCI hardware
(XEN) PCI: Probing PCI hardware (bus 00)
(XEN) PCI: i440KX/GX host bridge 00:19.0: secondary bus 00
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.4,XEN_VER=2.0,VIRT_BASE=0xC0000000'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Kernel image:  00c00000->00f1c8e4
(XEN)  Initrd image:  00000000->00000000
(XEN)  Dom0 alloc.:   01000000->09000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c0100000->c0464954
(XEN)  Init. ramdisk: c0465000->c0465000
(XEN)  Phys-Mach map: c0465000->c0485000
(XEN)  Page tables:   c0485000->c0488000
(XEN)  Start info:    c0488000->c0489000
(XEN)  Boot stack:    c0489000->c048a000
(XEN)  TOTAL:         c0000000->c0800000
(XEN)  ENTRY ADDRESS: c0100000
(XEN) Scrubbing DOM0 RAM: ..done.
(XEN) Scrubbing Free RAM: ...........done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen).