FlorianWolters/cpp-install_instructions.md

## cpp-install_instructions.md

      
    Raw
  

              cpp-install_instructions.md
            
          
    Installation instructions for the C++ ecosystem

This document contains installation instructions for tools and libraries for the
programming language C++. It uses the cross-platform build system CMake
whenever the software to download, configure, build and run supports it.
When building with multiple compilers for multiple architectures, a certain
naming scheme is used (Convention over Configuration), since the build
description has to consist of the following four aspects to be unique:

The compiler used.
The version of the compiler used.
The configuration (build type) of the software to build (normally Release).
The architecture of the software built (e.g. x64, x86).

Combined with the three compilers MinGW-w64 / MinGW-Builds 7.2.0,
Microsoft Visual C++ (MSVC) 15.0 and Clang 4.0.0, using the build
system Ninja the default build types (configurations), i.e. using CMake
without any custom build type, leads to the following directory structure in the
Out-of-Source build directory _builds.
└───_builds
    └───build-gtest-1.8.0
        ├───x64
        │   ├───clang50
        │   │   ├───shared
        │   │   │   ├───Debug
        │   │   │   ├───MinSizeRel
        │   │   │   ├───Release
        │   │   │   ├───RelWithDebInfo
        │   │   └───static
        │   │       ├───Debug
        │   │       ├───MinSizeRel
        │   │       ├───Release
        │   │       ├───RelWithDebInfo
        │   ├───mgw72
        │   │   ├───shared
        │   │   │   ├───Debug
        │   │   │   ├───MinSizeRel
        │   │   │   ├───Release
        │   │   │   ├───RelWithDebInfo
        │   │   └───static
        │   │       ├───Debug
        │   │       ├───MinSizeRel
        │   │       ├───Release
        │   │       ├───RelWithDebInfo
        │   ├───vc141
        │   │   ├───shared
        │   │   │   ├───Debug
        │   │   │   ├───MinSizeRel
        │   │   │   ├───Release
        │   │   │   ├───RelWithDebInfo
        │   │   └───static
        │   │       ├───Debug
        │   │       ├───MinSizeRel
        │   │       ├───Release
        │   │       ├───RelWithDebInfo
        └───x86
            ├───clang50
            │   ├───shared
            │   │   ├───Debug
            │   │   ├───MinSizeRel
            │   │   ├───Release
            │   │   ├───RelWithDebInfo
            │   └───static
            │       ├───Debug
            │       ├───MinSizeRel
            │       ├───Release
            │       ├───RelWithDebInfo
            ├───mgw72
            │   ├───shared
            │   │   ├───Debug
            │   │   ├───MinSizeRel
            │   │   ├───Release
            │   │   ├───RelWithDebInfo
            │   └───static
            │       ├───Debug
            │       ├───MinSizeRel
            │       ├───Release
            │       ├───RelWithDebInfo
            └───vc141
                ├───shared
                │   ├───Debug
                │   ├───MinSizeRel
                │   ├───Release
                │   ├───RelWithDebInfo
                └───static
                    ├───Debug
                    ├───MinSizeRel
                    ├───Release
                    └───RelWithDebInfo

TODOs:

Remove 32-bit compile instructions (easy to adopt).
Add each combination of static|shared target with static|shared run-time.


Table of Contents


Library

Compression

zlib
bzip2


Cryptography

Crypto++
Sodium


General-Purpose

Boost
GSL: Guidelines Support Library


Graphical User Interface

Qt


Inter-Process Communication (IPC)

ZeroMQ


Reflection

Ponder
RTTR


Serialization

Cereal
Protocol Buffers
yaml-cpp


Markup Language

Cpp-Markdown


Test

Google Test


Distributed Computing

CORBA

TAO: The ACE ORB


Build Tool

CMake


Documentation Generator

Doxygen


Profiler / Memory Debugger

Valgrind


Code Coverage Tool

LCOV
Gcovr


Static Code Analyzer

cloc (Count Lines of Code)
Cppcheck
Flawfinder
include-what-you-use (iwyu)


Integrated Development Environment

Qt Creator


Compiler

GNAT GPL Ada
LLVM+Clang+compiler-rt


Python

Pip Installs Python (pip)


Application

Network

Packet Sender


Library

Compression

zlib

Microsoft Windows

powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri http://zlib.net/zlib-1.2.11.tar.gz -OutFile zlib-1.2.11.tar.gz"
tar -xf zlib-1.2.11.tar.gz

MSVC 14.1 x64

Open a MSVC 64-bit command prompt.
####### Static Release with Shared Run-Time Library
cmake^
 -GNinja^
 -Hzlib-1.2.11^
 -Bbuild-zlib-1.2.11/x64/vc141/release^
 -DCMAKE_BUILD_TYPE=Release^
 -DCMAKE_C_COMPILER=cl^
 -DCMAKE_INSTALL_PREFIX=../native/zlib/zlib-1.2.11-x64/static
cmake^
 --build build-zlib-1.2.11/x64/vc141/release^
 --config Release^
 --target install
RD /S /Q "..\native\zlib\zlib-1.2.11-x64\static\bin"
DEL "..\native\zlib\zlib-1.2.11-x64\static\lib\zlib.lib"
MOVE "..\native\zlib\zlib-1.2.11-x64\static\lib\zlibstatic.lib" "..\native\zlib\zlib-1.2.11-x64\static\lib\zlib.lib"

####### Dynamic Release with Shared Run-Time Library
cmake^
 -GNinja^
 -Hzlib-1.2.11^
 -Bbuild-zlib-1.2.11/x64/vc141/release^
 -DCMAKE_BUILD_TYPE=Release^
 -DCMAKE_C_COMPILER=cl^
 -DCMAKE_INSTALL_PREFIX=../native/zlib/zlib-1.2.11-x64/shared
cmake^
 --build build-zlib-1.2.11/x64/vc141/release^
 --config Release^
 --target install
DEL /F /Q "..\native\zlib\zlib-1.2.11-x64\shared\lib\*zlibstatic*"

####### Static Debug with Shared Run-Time Library
cmake^
 -GNinja^
 -Hzlib-1.2.11^
 -Bbuild-zlib-1.2.11/x64/vc141/debug^
 -DCMAKE_BUILD_TYPE=Debug^
 -DCMAKE_C_COMPILER=cl^
 -DCMAKE_DEBUG_POSTFIX=d^
 -DCMAKE_INSTALL_PREFIX=../native/zlib/zlib-1.2.11-x64/static
cmake^
 --build build-zlib-1.2.11/x64/vc141/debug^
 --config Debug^
 --target install
RD /S /Q "..\native\zlib\zlib-1.2.11-x64\static\bin"
DEL "..\native\zlib\zlib-1.2.11-x64\static\lib\zlibd.lib"
MOVE "..\native\zlib\zlib-1.2.11-x64\static\lib\zlibstaticd.lib" "..\native\zlib\zlib-1.2.11-x64\static\lib\zlibd.lib"

####### Dynamic Debug with Shared Run-Time Library
cmake^
 -GNinja^
 -Hzlib-1.2.11^
 -Bbuild-zlib-1.2.11/x64/vc141/debug^
 -DCMAKE_BUILD_TYPE=Debug^
 -DCMAKE_C_COMPILER=cl^
 -DCMAKE_DEBUG_POSTFIX=d^
 -DCMAKE_INSTALL_PREFIX=../native/zlib/zlib-1.2.11-x64/shared
cmake^
 --build build-zlib-1.2.11/x64/vc141/debug^
 --config Debug^
 --target install
DEL /F /Q "..\native\zlib\zlib-1.2.11-x64\shared\lib\*zlibstatic*"

MinGW-w64 (GCC 7.2.0) x64

Open a MinGW-w64 64-bit command prompt.
####### Static Release with Shared Run-Time Library
cmake^
 -GNinja^
 -Hzlib-1.2.11^
 -Bbuild-zlib-1.2.11/x64/mgw72/release^
 -DCMAKE_BUILD_TYPE=Release^
 -DCMAKE_C_COMPILER=gcc^
 -DCMAKE_INSTALL_PREFIX=../native/zlib/zlib-1.2.11-x64/static
cmake^
 --build build-zlib-1.2.11/x64/mgw72/release^
 --config Release^
 --target install
RD /S /Q "..\native\zlib\zlib-1.2.11-x64\static\bin"
DEL "..\native\zlib\zlib-1.2.11-x64\static\lib\libzlib.dll.a"
MOVE "..\native\zlib\zlib-1.2.11-x64\static\lib\libzlibstatic.lib" "..\native\zlib\zlib-1.2.11-x64\static\lib\libzlib.lib"

####### Dynamic Release with Shared Run-Time Library
cmake^
 -GNinja^
 -Hzlib-1.2.11^
 -Bbuild-zlib-1.2.11/x64/mgw72/release^
 -DCMAKE_BUILD_TYPE=Release^
 -DCMAKE_C_COMPILER=gcc^
 -DCMAKE_INSTALL_PREFIX=../native/zlib/zlib-1.2.11-x64/shared
cmake^
 --build build-zlib-1.2.11/x64/mgw72/release^
 --config Release^
 --target install
DEL /F /Q "..\native\zlib\zlib-1.2.11-x64\shared\lib\*zlibstatic*"

####### Static Debug with Shared Run-Time Library
cmake^
 -GNinja^
 -Hzlib-1.2.11^
 -Bbuild-zlib-1.2.11/x64/mgw72/debug^
 -DCMAKE_BUILD_TYPE=Debug^
 -DCMAKE_C_COMPILER=gcc^
 -DCMAKE_DEBUG_POSTFIX=d^
 -DCMAKE_INSTALL_PREFIX=../native/zlib/zlib-1.2.11-x64/static
cmake^
 --build build-zlib-1.2.11/x64/mgw72/debug^
 --config Debug^
 --target install
RD /S /Q "..\native\zlib\zlib-1.2.11-x64\static\bin"
DEL "..\native\zlib\zlib-1.2.11-x64\static\lib\libzlibd.dll.a"
MOVE "..\native\zlib\zlib-1.2.11-x64\static\lib\libzlibstaticd.lib" "..\native\zlib\zlib-1.2.11-x64\static\lib\libzlibd.lib"

####### Dynamic Debug with Shared Run-Time Library
cmake^
 -GNinja^
 -Hzlib-1.2.11^
 -Bbuild-zlib-1.2.11/x64/mgw72/debug^
 -DCMAKE_BUILD_TYPE=Debug^
 -DCMAKE_C_COMPILER=gcc^
 -DCMAKE_DEBUG_POSTFIX=d^
 -DCMAKE_INSTALL_PREFIX=../native/zlib/zlib-1.2.11-x64/shared
cmake^
 --build build-zlib-1.2.11/x64/mgw72/debug^
 --config Debug^
 --target install
DEL /F /Q "..\native\zlib\zlib-1.2.11-x64\shared\lib\*zlibstatic*"

[bzip2][33]

Microsoft Windows

MSVC 14.1 x64

Download from https://github.com/philr/bzip2-windows/releases.
MinGW-w64 (GCC 7.2.0) x64

REM Open a MSYS2-MinGW64 command prompt
make -C bzip2-1.0.6 install PREFIX=../../native/bzip2/bzip2-1.0.6-x64

Cryptography

Crypto++

Microsoft Windows

powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri https://github.com/weidai11/cryptopp/archive/CRYPTOPP_5_6_5.zip -OutFile cryptopp-CRYPTOPP_5_6_5.zip"
powershell -NoLogo -NoProfile -Command "Expand-Archive cryptopp-CRYPTOPP_5_6_5.zip -Dest ."

TODO(wolters): When building for x64 (64bit) the cryptest.exe is not generated if Ninja is used as the generator.
MSVC 14.1 x86

REM Open a MSVC 32-bit command prompt.
cmake -GNinja -Hcryptopp-CRYPTOPP_5_6_5 -Bbuild-cryptopp-5.6.5/x86/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/cryptopp/cryptopp-5.6.5-x86
cmake --build build-cryptopp-5.6.5/x86/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x86

REM Open a MinGW-w64 32-bit command prompt.
cmake -GNinja -Hcryptopp-CRYPTOPP_5_6_5 -Bbuild-cryptopp-5.6.5/x86/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/cryptopp/cryptopp-5.6.5-x86
cmake --build build-cryptopp-5.6.5/x86/mgw72/Release --config Release --target install

MSVC 14.1 x64

REM Open a MSVC 64-bit command prompt.
cmake -G"CodeBlocks - MinGW Makefiles" -Hcryptopp-CRYPTOPP_5_6_5 -Bbuild-cryptopp-5.6.5/x64/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/cryptopp/cryptopp-5.6.5-x64
cmake --build build-cryptopp-5.6.5/x64/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x64

REM Open a MinGW-w64 64-bit command prompt.
cmake -G"CodeBlocks - MinGW Makefiles" -Hcryptopp-CRYPTOPP_5_6_5 -Bbuild-cryptopp-5.6.5/x64/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/cryptopp/cryptopp-5.6.5-x64
cmake --build build-cryptopp-5.6.5/x64/mgw72/Release --config Release --target install

Sodium

TODO(wolters): Update Sodium section.
*-nix

wget https://github.com/jedisct1/libsodium/archive/1.0.11.zip
unzip libsodium-1.0.11.zip
cd libsodium-1.0.11
./autogen.sh
./configure --prefix=/opt/libsodium/libsodium-1.0.11
make && make check
sudo make install
sudo ln -snf /opt/libsodium/libsodium-1.0.11 /opt/libsodium/default

The installation of Sodium can be tested by creating the following C++ program
(file hello_sodium.cc):
#include <iostream>

#include <sodium.h>

int main() {
  if (sodium_init() == -1) {
    return 1;
  }

  std::cout << "hello, sodium\n";
}

Execute the following to compile, link and run the program:
g++ -o hello_sodium hello_sodium.cc -lsodium
./hello_sodium

The following should be printed to the standard output:
hello, world

General-Purpose

Boost

TODO(wolters): Find solution to avoid the hack cxxflags=-D_hypot=hypot install when building with MinGW-w64.
Microsoft Windows

powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri http://downloads.sf.net/project/boost/boost/1.65.1/boost_1_65_1.zip -OutFile boost_1_65_1.zip"
powershell -NoLogo -NoProfile -Command "Expand-Archive boost_1_65_1.zip -Dest ."

MSVC 14.1 x64 + x86

REM Open a MSVC 64-bit command prompt.
PUSHD boost_1_65_1
bootstrap
b2 -j%NUMBER_OF_PROCESSORS% --reconfigure --build-type=complete --build-dir=../boost_1_65_1-build/x86/vc141 --layout=versioned toolset=msvc-14.1 address-model=32 architecture=x86 install --prefix=../../native/boost/boost-1.65.1
b2 -j%NUMBER_OF_PROCESSORS% --reconfigure --build-type=complete --build-dir=../boost_1_65_1-build/x64/vc141 --layout=versioned --buildid=x64 toolset=msvc-14.1 address-model=64 architecture=x86 install --prefix=../../native/boost/boost-1.65.1
POPD

MinGW-w64 (GCC 7.2.0) x64 + x86

REM Open a MinGW-w64 command prompt.
PUSHD boost_1_65_1
bootstrap
b2 -j%NUMBER_OF_PROCESSORS% --reconfigure --build-type=complete --build-dir=../boost_1_65_1-build/x86/mgw72 --layout=versioned toolset=gcc address-model=32 architecture=x86 cxxflags=-D_hypot=hypot install --prefix=../../native/boost/boost-1.65.1
b2 -j%NUMBER_OF_PROCESSORS% --reconfigure --build-type=complete --build-dir=../boost_1_65_1-build/x64/mgw72 --layout=versioned --buildid=x64 toolset=gcc address-model=64 architecture=x86 cxxflags=-D_hypot=hypot install --prefix=../../native/boost/boost-1.65.1
POPD

Clang 5.0.0 x64 + x86

REM Open a MinGW-w64 command prompt.
PUSHD boost_1_65_1
bootstrap
b2 -j%NUMBER_OF_PROCESSORS% --reconfigure --build-type=complete --build-dir=../boost_1_65_1-build/x86/clang50 --layout=versioned toolset=clang address-model=32 architecture=x86 cxxflags="-target i686-w64-mingw32 -fmsc-version=0" linkflags="-target i686-w64-mingw32 -fmsc-version=0" install --prefix=../../native/boost/boost-1.65.1
b2 -j%NUMBER_OF_PROCESSORS% --reconfigure --build-type=complete --build-dir=../boost_1_65_1-build/x64/clang50 --layout=versioned --buildid=x64 toolset=clang address-model=64 architecture=x86 cxxflags="-target x86_64-w64-mingw32 -fmsc-version=0" linkflags="-target x86_64-w64-mingw32 -fmsc-version=0" install --prefix=../../native/boost/boost-1.65.1
POPD

*-nix

wget http://downloads.sourceforge.net/project/boost/boost/1.65.1/boost_1_65_1.zip
unzip boost_1_65_1.zip
cd boost_1_65_1
./bootstrap.sh --with-toolset=gcc --prefix=/opt/boost/boost-1.65.1
sudo ./b2 -j3 --build-dir=boost-1.65.1-build --build-type=complete toolset=gcc cxxflags=-std=c++11 install
sudo ln -snf /opt/boost/boost-1.65.1 /opt/boost/default

GSL: Guidelines Support Library

REM The GSL is a header-only C++ library, therefore the arguments
REM CMAKE_BUILD_TYPE, CMAKE_CXX_COMPILER and BUILD_SHARED_LIBS do not
REM influence the build (as of 2017-10-18).
cmake -GNinja -Hgsl-master -Bbuild-gsl-master -DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=OFF -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/gsl/gsl-master
cmake --build build-gsl-master --config Release --target install

Graphical User Interface

Qt

wget http://download.qt.io/official_releases/qt/5.7/5.9.2/qt-opensource-linux-x64-5.9.2.run
chmod +x qt-opensource-linux-x64-5.9.2.run
./qt-opensource-linux-x64-5.9.2.run

Enter /opt/qt/qt-5.9.2 in the Installation Folder dialog.


Select the "Select All" button in the "Select Components" dialog.


Deselect the items  "Sources" and "Qt Script (Deprecated)" below "Qt 5.9" and
deselect the item "Tools".
sudo ln -snf /opt/qt/qt-5.9.2 /opt/qt/default


Inter-Process Communication (IPC)

ZeroMQ

Microsoft Windows

powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri https://github.com/zeromq/libzmq/releases/download/v4.2.0/zeromq-4.2.0.zip -OutFile zeromq-4.2.0.zip"
powershell -NoLogo -NoProfile -Command "Expand-Archive zeromq-4.2.0.zip -Dest ."
REM Renaming the source directory to "libzmq" is mandatory to ensure referenced paths in other builds are set correctly.
MOVE zeromq-4.2.0 libzmq

MSVC 14.1 x86

REM Open a MSVC 32-bit command prompt.
cmake -G"CodeBlocks - NMake Makefiles" -Hlibzmq -Bbuild-zeromq-4.2.0/x86/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/zeromq/zeromq-4.2.0-x86
REM TODO(wolters): Building with CMake does not work with ZeroMQ 4.2.0. The following command is used to build the documentation only.
cmake --build build-zeromq-4.2.0/x86/vc141/Release --config Release --target install
PUSHD libzmq\builds\msvc\build
CALL build
POPD
XCOPY /I /Q /Y build-zeromq-4.2.0\x86\vc141\Release\doc ..\native\zeromq\zeromq-4.2.0-x86\doc\zmq
XCOPY /I /Q /Y libzmq\include ..\native\zeromq\zeromq-4.2.0-x86\include
XCOPY /I /Q /Y libzmq\bin\Win32\Release\v140\dynamic\*.exe ..\native\zeromq\zeromq-4.2.0-x86\bin
XCOPY /I /Q /Y libzmq\bin\Win32\Release\v140\dynamic\libzmq.dll ..\native\zeromq\zeromq-4.2.0-x86\bin
XCOPY /Q /Y libzmq\bin\Win32\Release\v140\dynamic\libzmq.dll ..\native\zeromq\zeromq-4.2.0-x86\lib\libzmq-v140-mt-4_2_0.dll*
XCOPY /Q /Y libzmq\bin\Win32\Release\v140\dynamic\libzmq.lib ..\native\zeromq\zeromq-4.2.0-x86\lib\libzmq-v140-mt-4_2_0.lib*
XCOPY /Q /Y libzmq\bin\Win32\Release\v140\static\libzmq.lib ..\native\zeromq\zeromq-4.2.0-x86\lib\libzmq-v140-mt-s-4_2_0.lib*
XCOPY /Q /Y libzmq\bin\Win32\Debug\v140\dynamic\libzmq.dll ..\native\zeromq\zeromq-4.2.0-x86\lib\libzmq-v140-mt-gd-4_2_0.dll*
XCOPY /Q /Y libzmq\bin\Win32\Debug\v140\dynamic\libzmq.lib ..\native\zeromq\zeromq-4.2.0-x86\lib\libzmq-v140-mt-gd-4_2_0.lib*
XCOPY /Q /Y libzmq\bin\Win32\Debug\v140\static\libzmq.lib ..\native\zeromq\zeromq-4.2.0-x86\lib\libzmq-v140-mt-sgd-4_2_0.lib*
XCOPY /Q /Y libzmq\AUTHORS ..\native\zeromq\zeromq-4.2.0-x86\share\zmq\AUTHORS*.txt
XCOPY /I /Q /Y libzmq\COPYING.LESSER ..\native\zeromq\zeromq-4.2.0-x86\share\zmq
MOVE /Y ..\native\zeromq\zeromq-4.2.0-x86\share\zmq\COPYING.LESSER ..\native\zeromq\zeromq-4.2.0-x86\share\zmq\COPYING.LESSER.txt
XCOPY /Q /Y libzmq\COPYING ..\native\zeromq\zeromq-4.2.0-x86\share\zmq\COPYING*.txt
XCOPY /Q /Y libzmq\NEWS ..\native\zeromq\zeromq-4.2.0-x86\share\zmq\NEWS*.txt
REM Copy libraries to simplify build of zmqpp.
XCOPY /Q /Y ..\native\zeromq\zeromq-4.2.0-x86\lib\libzmq-v140-mt-4_2_0.lib ..\native\zeromq\zeromq-4.2.0-x86\lib\zmq.lib*
XCOPY /Q /Y ..\native\zeromq\zeromq-4.2.0-x86\lib\libzmq-v140-mt-s-4_2_0.lib ..\native\zeromq\zeromq-4.2.0-x86\lib\zmq-static.lib*

MinGW-w64 (GCC 7.2.0) x86

REM Open a MinGW-w64 32-bit command prompt.
cmake -GNinja -Hlibzmq -Bbuild-zeromq-4.2.0/x86/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/zeromq/zeromq-4.2.0-x86
cmake --build build-zeromq-4.2.0/x86/mgw72/Release --config Release --target install

MSVC 14.1 x64

REM Open a MSVC 64-bit command prompt.
cmake -G"CodeBlocks - NMake Makefiles" -Hlibzmq -Bbuild-zeromq-4.2.0/x64/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/zeromq/zeromq-4.2.0-x64
REM TODO(wolters): Building with CMake does not work with ZeroMQ 4.2.0. The following command is used to build the documentation only.
cmake --build build-zeromq-4.2.0/x64/vc141/Release --config Release --target install
PUSHD libzmq\builds\msvc\build
CALL build
POPD
XCOPY /I /Q /Y build-zeromq-4.2.0\x64\vc141\Release\doc ..\native\zeromq\zeromq-4.2.0-x64\doc\zmq
XCOPY /I /Q /Y libzmq\include ..\native\zeromq\zeromq-4.2.0-x64\include
XCOPY /I /Q /Y libzmq\bin\x64\Release\v140\dynamic\*.exe ..\native\zeromq\zeromq-4.2.0-x64\bin
XCOPY /I /Q /Y libzmq\bin\x64\Release\v140\dynamic\libzmq.dll ..\native\zeromq\zeromq-4.2.0-x64\bin
XCOPY /Q /Y libzmq\bin\x64\Release\v140\dynamic\libzmq.dll ..\native\zeromq\zeromq-4.2.0-x64\lib\libzmq-v140-mt-4_2_0.dll*
XCOPY /Q /Y libzmq\bin\x64\Release\v140\dynamic\libzmq.lib ..\native\zeromq\zeromq-4.2.0-x64\lib\libzmq-v140-mt-4_2_0.lib*
XCOPY /Q /Y libzmq\bin\x64\Release\v140\static\libzmq.lib ..\native\zeromq\zeromq-4.2.0-x64\lib\libzmq-v140-mt-s-4_2_0.lib*
XCOPY /Q /Y libzmq\bin\x64\Debug\v140\dynamic\libzmq.dll ..\native\zeromq\zeromq-4.2.0-x64\lib\libzmq-v140-mt-gd-4_2_0.dll*
XCOPY /Q /Y libzmq\bin\x64\Debug\v140\dynamic\libzmq.lib ..\native\zeromq\zeromq-4.2.0-x64\lib\libzmq-v140-mt-gd-4_2_0.lib*
XCOPY /Q /Y libzmq\bin\x64\Debug\v140\static\libzmq.lib ..\native\zeromq\zeromq-4.2.0-x64\lib\libzmq-v140-mt-sgd-4_2_0.lib*
XCOPY /Q /Y libzmq\AUTHORS ..\native\zeromq\zeromq-4.2.0-x64\share\zmq\AUTHORS*.txt
XCOPY /I /Q /Y libzmq\COPYING.LESSER ..\native\zeromq\zeromq-4.2.0-x64\share\zmq
MOVE /Y ..\native\zeromq\zeromq-4.2.0-x64\share\zmq\COPYING.LESSER ..\native\zeromq\zeromq-4.2.0-x64\share\zmq\COPYING.LESSER.txt
XCOPY /Q /Y libzmq\COPYING ..\native\zeromq\zeromq-4.2.0-x64\share\zmq\COPYING*.txt
XCOPY /Q /Y libzmq\NEWS ..\native\zeromq\zeromq-4.2.0-x64\share\zmq\NEWS*.txt
REM Copy libraries to simplify build of zmqpp.
XCOPY /Q /Y ..\native\zeromq\zeromq-4.2.0-x64\lib\libzmq-v140-mt-4_2_0.lib ..\native\zeromq\zeromq-4.2.0-x64\lib\zmq.lib*
XCOPY /Q /Y ..\native\zeromq\zeromq-4.2.0-x64\lib\libzmq-v140-mt-s-4_2_0.lib ..\native\zeromq\zeromq-4.2.0-x64\lib\zmq-static.lib*

MinGW-w64 (GCC 7.2.0) x64

REM Open a MinGW-w64 64-bit command prompt.
cmake -GNinja -Hlibzmq -Bbuild-zeromq-4.2.0/x64/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/zeromq/zeromq-4.2.0-x64
cmake --build build-zeromq-4.2.0/x64/mgw72/Release --config Release --target install

zmqpp

Microsoft Windows

TODO(wolters): The CMakeLists.txt does not work when building with Microsoft Windows. Add the following:
if(WIN32)
  target_link_libraries(zmqpp wsock32 ws2_32)
endif()

if(WIN32)
  target_link_libraries(zmqpp-static wsock32 ws2_32)
endif()

Also, wrap the CMAKE_CXX_FLAGS modifications into a if statement.
if(${CMAKE_CXX_COMPILER_ID} STREQUAL GNU)
# ...
endif()
powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri https://github.com/zeromq/zmqpp/archive/4.1.2.zip -OutFile zmqpp-4.1.2.zip"
powershell -NoLogo -NoProfile -Command "Expand-Archive zmqpp-4.1.2.zip -Dest ."

MSVC 14.1 x86

REM Open a MSVC 32-bit command prompt.
cmake -GNinja -Hzmqpp-4.1.2 -Bbuild-zmqpp-4.1.2/x86/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/zeromq/zmqpp-4.1.2-x86 -DZEROMQ_INCLUDE_DIR=%ZEROMQ_INCLUDEDIR% -DZEROMQ_LIB_DIR=%ZEROMQ_LIBRARYDIR%
cmake --build build-zmqpp-4.1.2/x86/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x86

REM Open a MinGW-w64 32-bit command prompt.
cmake -GNinja -Hzmqpp-4.1.2 -Bbuild-zmqpp-4.1.2/x86/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/zeromq/zmqpp-4.1.2-x86 -DZEROMQ_INCLUDE_DIR=%ZEROMQ_INCLUDEDIR% -DZEROMQ_LIB_DIR=%ZEROMQ_LIBRARYDIR%
cmake --build build-zmqpp-4.1.2/x86/mgw72/Release --config Release --target install

MSVC 14.1 x64

REM Open a MSVC 64-bit command prompt.
cmake -GNinja -Hzmqpp-4.1.2 -Bbuild-zmqpp-4.1.2/x64/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/zeromq/zmqpp-4.1.2-x64 -DZEROMQ_INCLUDE_DIR=%ZEROMQ_INCLUDEDIR% -DZEROMQ_LIB_DIR=%ZEROMQ_LIBRARYDIR%
cmake --build build-zmqpp-4.1.2/x64/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x64

REM Open a MinGW-w64 64-bit command prompt.
cmake -GNinja -Hzmqpp-4.1.2 -Bbuild-zmqpp-4.1.2/x64/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/zeromq/zmqpp-4.1.2-x64 -DZEROMQ_INCLUDE_DIR=%ZEROMQ_INCLUDEDIR% -DZEROMQ_LIB_DIR=%ZEROMQ_LIBRARYDIR%
cmake --build build-zmqpp-4.1.2/x64/mgw72/Release --config Release --target install

Reflection

Ponder

Microsoft Windows

powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri https://github.com/billyquith/ponder/archive/1.3.0.zip -OutFile ponder-1.3.0.zip"
powershell -NoLogo -NoProfile -Command "Expand-Archive ponder-1.3.0.zip -Dest ."

MSVC 14.1 x86

REM Open a MSVC 32-bit command prompt.
cmake -GNinja -Hponder-1.3.0 -Bbuild-ponder-1.3.0/x86/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/ponder/ponder-1.3.0-x86
cmake --build build-ponder-1.3.0/x86/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x86

REM Open a MinGW-w64 32-bit command prompt.
cmake -GNinja -Hponder-1.3.0 -Bbuild-ponder-1.3.0/x86/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/ponder/ponder-1.3.0-x86
cmake --build build-ponder-1.3.0/x86/mgw72/Release --config Release --target install

MSVC 14.1 x64

REM Open a MSVC 32-bit command prompt.
cmake -GNinja -Hponder-1.3.0 -Bbuild-ponder-1.3.0/x64/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/ponder/ponder-1.3.0-x64
cmake --build build-ponder-1.3.0/x64/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x64

REM Open a MinGW-w64 32-bit command prompt.
cmake -GNinja -Hponder-1.3.0 -Bbuild-ponder-1.3.0/x64/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/ponder/ponder-1.3.0-x64
cmake --build build-ponder-1.3.0/x64/mgw72/Release --config Release --target install

RTTR

Microsoft Windows

powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri http://rttr.org/releases/rttr-0.9.5-src.zip -OutFile rttr-0.9.5-src.zip"
powershell -NoLogo -NoProfile -Command "Expand-Archive rttr-0.9.5-src.zip -Dest ."

MSVC 14.1 x86

REM Open a MSVC 32-bit command prompt.
cmake -GNinja -Hrttr-0.9.5-src -Bbuild-rttr-0.9.5/x86/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/rttr/rttr-0.9.5-x86
cmake --build build-rttr-0.9.5/x86/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x86

REM Open a MinGW-w64 32-bit command prompt.
cmake -GNinja -Hrttr-0.9.5-src -Bbuild-rttr-0.9.5/x86/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/rttr/rttr-0.9.5-x86
cmake --build build-rttr-0.9.5/x86/mgw72/Release --config Release --target install

MSVC 14.1 x64

REM Open a MSVC 64-bit command prompt.
cmake -GNinja -Hrttr-0.9.5-src -Bbuild-rttr-0.9.5/x64/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/rttr/rttr-0.9.5-x64
cmake --build build-rttr-0.9.5/x64/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x64

REM Open a MinGW-w64 64-bit command prompt.
cmake -GNinja -Hrttr-0.9.5-src -Bbuild-rttr-0.9.5/x64/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/rttr/rttr-0.9.5-x64
cmake --build build-rttr-0.9.5/x64/mgw72/Release --config Release --target install

Serialization

Cereal

Cereal is a header-only library.
Microsoft Windows

powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri https://github.com/USCiLab/cereal/archive/v1.2.1.zip -OutFile cereal-1.2.1"
powershell -NoLogo -NoProfile -Command "Expand-Archive cereal-1.2.1 -Dest ."

MSVC 14.1 x86

REM Open a MSVC 32-bit command prompt.
cmake -GNinja -Hcereal-1.2.1 -Bbuild-cereal-1.2.1/x86/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/cereal/cereal-1.2.1-x86
cmake --build build-cereal-1.2.1/x86/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x86

REM Open a MinGW-w64 32-bit command prompt.
cmake -GNinja -Hcereal-1.2.1 -Bbuild-cereal-1.2.1/x86/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/cereal/cereal-1.2.1-x86
cmake --build build-cereal-1.2.1/x86/mgw72/Release --config Release --target install

MSVC 14.1 x64

REM Open a MSVC 64-bit command prompt.
cmake -GNinja -Hcereal-1.2.1 -Bbuild-cereal-1.2.1/x64/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/cereal/cereal-1.2.1-x64
cmake --build build-cereal-1.2.1/x64/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x64

REM Open a MinGW-w64 64-bit command prompt.
cmake -GNinja -Hcereal-1.2.1 -Bbuild-cereal-1.2.1/x64/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/cereal/cereal-1.2.1-x64
cmake --build build-cereal-1.2.1/x64/mgw72/Release --config Release --target install

Protocol Buffers

The following commands build Protobuf with support for zlib. In order to make the
commands work the environment variable ZLIB_ROOT has to be set pointing to the
root directory of a prebuilt zlib installation.
Microsoft Windows

powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri https://github.com/google/protobuf/archive/v3.5.0.1.zip -OutFile protobuf-3.5.0.1.zip"
powershell -NoLogo -NoProfile -Command "Expand-Archive protobuf-3.5.0.1.zip -Dest ."

MSVC 14.1 x64

Open a MSVC 64-bit command prompt.
####### Static Release with Shared Run-Time Library
cmake^
 -GNinja^
 -Hprotobuf-3.5.0.1/cmake^
 -Bbuild-protobuf-3.5.0.1/x64/vc141/Release/static^
 -DCMAKE_BUILD_TYPE=Release^
 -DCMAKE_C_COMPILER=cl^
 -DCMAKE_CXX_COMPILER=cl^
 -DCMAKE_INSTALL_PREFIX=../native/protobuf/protobuf-3.5.0.1-x64^
 -Dprotobuf_BUILD_SHARED_LIBS=OFF^
 -Dprotobuf_BUILD_TESTS=OFF^
 -Dprotobuf_MSVC_STATIC_RUNTIME=OFF^
 -Dprotobuf_WITH_ZLIB=ON^
 -DZLIB_ROOT="%ZLIB_ROOT%"
cmake^
 --build build-protobuf-3.5.0.1/x64/vc141/Release/static^
 --config Release^
 --target install

####### Shared Release with Shared Run-Time Library
cmake^
 -GNinja^
 -Hprotobuf-3.5.0.1/cmake^
 -Bbuild-protobuf-3.5.0.1/x64/vc141/Release/shared^
 -DCMAKE_BUILD_TYPE=Release^
 -DCMAKE_C_COMPILER=cl^
 -DCMAKE_CXX_COMPILER=cl^
 -DCMAKE_INSTALL_PREFIX=../native/protobuf/protobuf-3.5.0.1-x64^
 -Dprotobuf_BUILD_SHARED_LIBS=OFF^
 -Dprotobuf_BUILD_TESTS=OFF^
 -Dprotobuf_MSVC_STATIC_RUNTIME=OFF^
 -Dprotobuf_WITH_ZLIB=ON^
 -DZLIB_ROOT="%ZLIB_ROOT%"
cmake^
 --build build-protobuf-3.5.0.1/x64/vc141/Release/shared^
 --config Release^
 --target install

MinGW-w64 (GCC 7.2.0) x64

Open a MinGW-w64 64-bit command prompt.
####### Static Release with Shared Run-Time Library
cmake^
 -GNinja^
 -Hprotobuf-3.5.0.1/cmake^
 -Bbuild-protobuf-3.5.0.1/x64/mgw72/Release/static^
 -DCMAKE_BUILD_TYPE=Release^
 -DCMAKE_C_COMPILER=gcc^
 -DCMAKE_CXX_COMPILER=g++^
 -DCMAKE_INSTALL_PREFIX=../native/protobuf/protobuf-3.5.0.1-x64^
 -Dprotobuf_BUILD_TESTS=OFF^
 -Dprotobuf_BUILD_SHARED_LIBS=OFF^
 -Dprotobuf_BUILD_TESTS=OFF^
 -Dprotobuf_MSVC_STATIC_RUNTIME=OFF^
 -Dprotobuf_WITH_ZLIB=ON^
 -DZLIB_ROOT="%ZLIB_ROOT%"
cmake^
 --build build-protobuf-3.5.0.1/x64/mgw72/Release/static^
 --config Release^
 --target install

####### Shared Release with Shared Run-Time Library
cmake^
 -GNinja^
 -Hprotobuf-3.5.0.1/cmake^
 -Bbuild-protobuf-3.5.0.1/x64/vc141/Release/shared^
 -DCMAKE_BUILD_TYPE=Release^
 -DCMAKE_C_COMPILER=gcc^
 -DCMAKE_CXX_COMPILER=g++^
 -DCMAKE_INSTALL_PREFIX=../native/protobuf/protobuf-3.5.0.1-x64^
 -Dprotobuf_BUILD_SHARED_LIBS=OFF^
 -Dprotobuf_BUILD_TESTS=OFF^
 -Dprotobuf_MSVC_STATIC_RUNTIME=OFF^
 -Dprotobuf_WITH_ZLIB=ON^
 -DZLIB_ROOT="%ZLIB_ROOT%"
cmake^
 --build build-protobuf-3.5.0.1/x64/vc141/Release/shared^
 --config Release^
 --target install

yaml-cpp

Microsoft Windows

powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri https://github.com/jbeder/yaml-cpp/archive/release-0.5.3.zip -OutFile yaml-cpp-yaml-cpp-0.5.3.zip"
powershell -NoLogo -NoProfile -Command "Expand-Archive yaml-cpp-yaml-cpp-0.5.3.zip -Dest ."

MSVC 14.1 x86

REM Open a MSVC 32-bit command prompt.
cmake -GNinja -Hyaml-cpp-yaml-cpp-0.5.3 -Bbuild-yaml-cpp-0.5.3/x86/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/yaml-cpp/yaml-cpp-0.5.3-x86
cmake --build build-yaml-cpp-0.5.3/x86/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x86

REM Open a MinGW-w64 32-bit command prompt.
cmake -GNinja -Hyaml-cpp-yaml-cpp-0.5.3 -Bbuild-yaml-cpp-0.5.3/x86/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/yaml-cpp/yaml-cpp-0.5.3-x86
cmake --build build-yaml-cpp-0.5.3/x86/mgw72/Release --config Release --target install

MSVC 14.1 x64

REM Open a MSVC 64-bit command prompt.
cmake -GNinja -Hyaml-cpp-yaml-cpp-0.5.3 -Bbuild-yaml-cpp-yaml-cpp-0.5.3/x64/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/yaml-cpp/yaml-cpp-0.5.3-x64
cmake --build build-yaml-cpp-yaml-cpp-0.5.3/x64/vc141/Release --config Release --target install

MinGW-w64 (GCC 7.2.0) x64

REM Open a MinGW-w64 64-bit command prompt.
cmake -GNinja -Hyaml-cpp-yaml-cpp-0.5.3 -Bbuild-yaml-cpp-yaml-cpp-0.5.3/x64/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/yaml-cpp/yaml-cpp-0.5.3-x64
cmake --build build-yaml-cpp-yaml-cpp-0.5.3/x64/mgw72/Release --config Release --target install

Markup Language

Cpp-Markdown

Microsoft Windows

powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri https://github.com/sevenjay/cpp-markdown/archive/master.zip -OutFile cpp-markdown-master.zip"
powershell -NoLogo -NoProfile -Command "Expand-Archive cpp-markdown-master.zip -Dest ."

MSVC 14.1 x86

REM Open a MSVC 32-bit command prompt.
cmake -GNinja -Hcpp-markdown-master -Bbuild-cpp-markdown-head/x86/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/cpp-markdown/cpp-markdown-head-x86
cmake --build build-cpp-markdown-head/x86/vc141/Release --config Release --target all
XCOPY /I /Q /Y cpp-markdown-master/src/*.h ../native/cpp-markdown/cpp-markdown-head-x86/include
XCOPY /I /Q /Y cpp-markdown-master-build/*.lib  ../native/cpp-markdown/cpp-markdown-head-x86/lib

MinGW-w64 (GCC 7.2.0) x86

REM Open a MinGW-w64 32-bit command prompt.
cmake -GNinja -Hcpp-markdown-master -Bbuild-cpp-markdown-head/x86/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/cpp-markdown/cpp-markdown-head-x86
cmake --build build-cpp-markdown-head/x86/mgw72/Release --config Release --target all
XCOPY /I /Q /Y cpp-markdown-master/src/*.h ../native/cpp-markdown/cpp-markdown-head-x86/include
XCOPY /I /Q /Y cpp-markdown-master-build/*.a  ../native/cpp-markdown/cpp-markdown-head-x86/lib

MSVC 14.1 x64

REM Open a MSVC 64-bit command prompt.
cmake -GNinja -Hcpp-markdown-master -Bbuild-cpp-markdown-head/x64/vc141/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=cl -DCMAKE_CXX_COMPILER=cl -DCMAKE_INSTALL_PREFIX=../native/cpp-markdown/cpp-markdown-head-x64
cmake --build build-cpp-markdown-head/x64/vc141/Release --config Release --target all
XCOPY /I /Q /Y cpp-markdown-master/src/*.h ../native/cpp-markdown/cpp-markdown-head-x86/include
XCOPY /I /Q /Y cpp-markdown-master-build/*.lib  ../native/cpp-markdown/cpp-markdown-head-x86/lib

MinGW-w64 (GCC 7.2.0) x64

REM Open a MinGW-w64 64-bit command prompt.
cmake -GNinja -Hcpp-markdown-master -Bbuild-cpp-markdown-head/x64/mgw72/Release -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/cpp-markdown/cpp-markdown-head-x64
cmake --build build-cpp-markdown-head/x64/mgw72/Release --config Release --target all
XCOPY /I /Q /Y cpp-markdown-master/src/*.h ../native/cpp-markdown/cpp-markdown-head-x86/include
XCOPY /I /Q /Y cpp-markdown-master-build/*.a  ../native/cpp-markdown/cpp-markdown-head-x86/lib

Test

Google Test (GTest)

Microsoft Windows

powershell -NoLogo -NoProfile -Command "Invoke-WebRequest -Uri https://github.com/google/googletest/archive/release-1.8.0.zip -OutFile googletest-release-1.8.0.zip"
powershell -NoLogo -NoProfile -Command "Expand-Archive googletest-release-1.8.0.zip -Dest ."

MinGW-w64 (GCC 7.2.0) x64

Static Release with Shared Run-Time Library

cmake -GNinja -Hgoogletest-release-1.8.0 -Bbuild-gtest-1.8.0/x64/mgw72/Release/static -DCMAKE_BUILD_TYPE=Release -Dgtest_disable_pthreads=ON -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/gtest/gtest-1.8.0-x64
cmake --build build-gtest-1.8.0/x64/mgw72/Release/static --config Release --target install

Shared Release with Shared Run-Time Library

cmake -GNinja -Hgoogletest-release-1.8.0 -Bbuild-gtest-1.8.0/x64/mgw72/Release/shared -DCMAKE_BUILD_TYPE=Release -Dgtest_disable_pthreads=ON -DBUILD_SHARED_LIBS=ON -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/gtest/gtest-1.8.0-x64
cmake --build build-gtest-1.8.0/x64/mgw72/Release/shared --config Release --target install

Static Debug with Shared Run-Time Library

cmake -GNinja -Hgoogletest-release-1.8.0 -Bbuild-gtest-1.8.0/x64/mgw72/Debug/static -DCMAKE_BUILD_TYPE=Debug -Dgtest_disable_pthreads=ON -DCMAKE_DEBUG_POSTFIX=d -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/gtest/gtest-1.8.0-x64
cmake --build build-gtest-1.8.0/x64/mgw72/Debug/static --config Debug --target install

Shared Debug with Shared Run-Time Library

cmake -GNinja -Hgoogletest-release-1.8.0 -Bbuild-gtest-1.8.0/x64/mgw72/Debug/shared -DCMAKE_BUILD_TYPE=Debug -Dgtest_disable_pthreads=ON -DCMAKE_DEBUG_POSTFIX=d -DBUILD_SHARED_LIBS=ON -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++ -DCMAKE_INSTALL_PREFIX=../native/gtest/gtest-1.8.0-x64
cmake --build build-gtest-1.8.0/x64/mgw72/Debug/shared --config Debug --target install

MSVC 14.1 x64

Static Release with Static Run-Time Library

cmake^
 -GNinja^
 -Hgoogletest-release-1.8.0^
 -Bbuild-gtest-1.8.0/x64/vc141/Release/static^
 -DBUILD_SHARED_LIBS=OFF^
 -DCMAKE_BUILD_TYPE=Release^
 -DCMAKE_C_COMPILER=cl^
 -DCMAKE_CXX_COMPILER=cl^
 -DCMAKE_INSTALL_PREFIX=../native/gtest/gtest-1.8.0-x64^
 -Dgtest_build_samples=OFF^
 -Dgtest_build_tests=OFF^
 -DGTEST_CREATE_SHARED_LIBRARY=OFF^
 -Dgtest_force_shared_crt=OFF
cmake^
 --build build-gtest-1.8.0/x64/vc141/Release/static^
 --config Release^
 --target install

Shared Release with Shared Run-Time Library

cmake^
 -GNinja^
 -Hgoogletest-release-1.8.0^
 -Bbuild-gtest-1.8.0/x64/vc141/Release/shared^
 -DBUILD_SHARED_LIBS=ON^
 -DCMAKE_BUILD_TYPE=Release^
 -DCMAKE_RELEASE_POSTFIX=md^
 -DCMAKE_C_COMPILER=cl^
 -DCMAKE_CXX_COMPILER=cl^
 -DCMAKE_INSTALL_PREFIX=../native/gtest/gtest-1.8.0-x64^
 -Dgtest_build_samples=OFF^
 -Dgtest_build_tests=OFF^
 -DGTEST_CREATE_SHARED_LIBRARY=OFF^
 -Dgtest_force_shared_crt=ON
cmake^
 --build build-gtest-1.8.0/x64/vc141/Release/shared^
 --config Release^
 --target install

Static Debug with Static Run-Time Library

cmake^
 -GNinja^
 -Hgoogletest-release-1.8.0^
 -Bbuild-gtest-1.8.0/x64/vc141/Debug/static^
 -DBUILD_SHARED_LIBS=OFF^
 -DCMAKE_BUILD_TYPE=Debug^
 -DCMAKE_DEBUG_POSTFIX=d^
 -DCMAKE_C_COMPILER=cl^
 -DCMAKE_CXX_COMPILER=cl^
 -DCMAKE_INSTALL_PREFIX=../native/gtest/gtest-1.8.0-x64^
 -Dgtest_build_samples=OFF^
 -Dgtest_build_tests=OFF^
 -DGTEST_CREATE_SHARED_LIBRARY=OFF^
 -Dgtest_force_shared_crt=OFF
cmake^
 --build build-gtest-1.8.0/x64/vc141/Debug/static^
 --config Debug^
 --target install

Shared Debug with Shared Run-Time Library

cmake^
 -GNinja^
 -Hgoogletest-release-1.8.0^
 -Bbuild-gtest-1.8.0/x64/vc141/Debug/shared^
 -DBUILD_SHARED_LIBS=ON^
 -DCMAKE_BUILD_TYPE=Debug^
 -DCMAKE_DEBUG_POSTFIX=mdd^
 -DCMAKE_C_COMPILER=cl^
 -DCMAKE_CXX_COMPILER=cl^
 -DCMAKE_INSTALL_PREFIX=../native/gtest/gtest-1.8.0-x64^
 -Dgtest_build_samples=OFF^
 -Dgtest_build_tests=OFF^
 -DGTEST_CREATE_SHARED_LIBRARY=OFF^
 -Dgtest_force_shared_crt=ON
cmake^
 --build build-gtest-1.8.0/x64/vc141/Debug/shared^
 --config Debug^
 --target install

Distributed Computing

CORBA

TAO: The ACE ORB

*-nix

su
wget http://download.dre.vanderbilt.edu/previous_versions/ACE+TAO-6.3.1.tar.gz
tar -xf ACE+TAO-6.3.1.tar.gz
export ACE_ROOT=$PWD/ACE_wrappers
echo "#include <ace/config-linux.h>" > $ACE_ROOT/ace/config.h
echo "" >> $ACE_ROOT/ace/config.h
echo "INSTALL_PREFIX = /usr/local" > $ACE_ROOT/include/makeinclude/platform_macros.GNU
echo "include \$(ACE_ROOT)/include/makeinclude/platform_linux.GNU" >> $ACE_ROOT/include/makeinclude/platform_macros.GNU
sudo make install -C $ACE_ROOT/ace
make -C $ACE_ROOT/apps/gperf
export TAO_ROOT=$ACE_ROOT/TAO
make install -C $TAO_ROOT

Build Tool

CMake

*-nix

Source

wget https://cmake.org/cmake/help/v3.10/CMake.qch
wget http://cmake.org/files/v3.10/cmake-3.10.0.tar.gz
tar -xf cmake-3.10.0.tar.gz
cmake -G"Unix Makefiles" -DCMAKE_INSTALL_PREFIX=/opt/cmake/cmake-3.10.0 -Bcmake-3.10.0-build -Hcmake-3.10.0
cmake --build cmake-3.10.0-build --target install
sudo mv CMake.qch /opt/cmake/cmake-3.10.0/doc
sudo ln -snf /opt/cmake/cmake-3.10.0 /opt/cmake/default

Binary

wget https://cmake.org/cmake/help/v3.8/CMake.qch
wget http:/cmake.org/files/v3.8/cmake-3.10.0-Linux-x86_64.sh
sh cmake-3.10.0-Linux-x86_64.sh
sudo mkdir /opt/cmake
sudo mv cmake-3.10.0-Linux-x86_64 /opt/cmake/cmake-3.10.0
sudo mv CMake.qch /opt/cmake/cmake-3.10.0/doc
sudo ln -snf /opt/cmake/cmake-3.10.0 /opt/cmake/default

Documentation Generator

Doxygen

*-nix

Source

wget http://ftp.stack.nl/pub/users/dimitri/doxygen-1.8.13.src.tar.gz
tar -xf doxygen-1.8.13.src.tar.gz
cmake -G"Unix Makefiles" -Dbuild_doc=NO -Dbuild_wizard=YES -DCMAKE_INSTALL_PREFIX:PATH=/opt/doxygen/doxygen-1.8.13 -Bdoxygen-1.8.13-build -Hdoxygen-1.8.13
cmake --build doxygen-1.8.13-build --target install
sudo ln -snf /opt/doxygen/doxygen-1.8.13 /opt/doxygen/default

Binary

tar -xf doxygen-1.8.13.linux.bin.tar.gz
python -m compileall doxytag.py
mv doxytag.pyc doxygen-1.8.13/bin/doxytag
cd doxygen-1.8.13
./configure --prefix /opt/doxygen/doxygen-1.8.13
sudo make install
sudo ln -snf /opt/doxygen/doxygen-1.8.13 /opt/doxygen/default

Profiler / Memory Debugger

Valgrind

*-nix

wget http://valgrind.org/downloads/valgrind-3.11.0.tar.bz2
tar -xf valgrind-3.11.0.tar.bz2
cd valgrind-3.11.0
sh ./configure --build x86_64-w64-linux-gnu
# If using "MinGW" with a "Microsoft Windows" OS:
#sh ./configure --build x86_64-w64-mingw32
make
make check

Code Coverage Tool

LCOV

*-nix

wget http://downloads.sf.net/ltp/lcov-1.12.tar.gz
tar -xf lcov-1.12.tar.gz
sudo make install -C lcov-1.12 PREFIX=/opt/lcov/lcov-1.12
sudo ln -snf /opt/lcov/lcov-1.12 /opt/lcov/default

Gcovr

*-nix

Automatic install with "Pip Installs Python (pip)":
pip install gcovr

If installing into a custom location (e.g. ~/usr):
wget https://github.com/gcovr/gcovr/archive/3.3.zip
unzip gcovr-3.3.zip
mkdir -p /opt/gcovr/gcovr-3.3/bin
sudo cp gcovr-3.3/scripts/gcovr /opt/gcovr/gcovr-3.3/bin
sudo ln -snf /opt/gcovr/gcovr-3.3 /opt/gcovr/default

Static Code Analyzer

cloc (Count Lines of Code)

*-nix

wget https://github.com/AlDanial/cloc/releases/download/v1.74/cloc-1.74.tar.gz
tar -xf cloc-1.74.tar.gz
sudo mkdir -p /opt/cloc/cloc-1.74/bin
sudo cp cloc-1.70/cloc /opt/cloc/cloc-1.74/bin
sudo ln -snf /opt/cloc/cloc-1.74 /opt/cloc/default

Cppcheck

*-nix

wget http://downloads.sf.net/project/cppcheck/cppcheck/1.81/cppcheck-1.81.zip
unzip cppcheck-1.81.tar.gz
sudo make install -C cppcheck-1.81 SRCDIR=build PREFIX=/opt/cppcheck/cppcheck-1.81 CFGDIR=/opt/cppcheck/cppcheck-1.81
sudo ln -snf /opt/cppcheck/cppcheck-1.81 /opt/cppcheck/default

Flawfinder

*-nix

tar -xf flawfinder-2.0.4.tar.gz
sudo make install -C flawfinder-2.0.4 prefix=/opt/flawfinder/flawfinder-2.0.4
sudo ln -snf /opt/flawfinder/flawfinder-2.0.4 /opt/flawfinder/default

include-what-you-use (iwyu)

*-nix

wget http://include-what-you-use.org/downloads/include-what-you-use-0.8.src.tar.gz
tar -xf include-what-you-use-0.8.src.tar.gz
cmake -G"Unix Makefiles" -Binclude-what-you-use-0.8-build -Hinclude-what-you-use -DIWYU_LLVM_ROOT_PATH=/opt/clang+llvm/default -DCMAKE_INSTALL_PREFIX=/opt/include-what-you-use/include-what-you-use-0.8
sudo cmake --build include-what-you-use-0.8-build --target install
sudo cp include-what-you-use/iwyu_tool.py /opt/include-what-you-use/include-what-you-use-0.8/bin
sudo ln -snf /opt/include-what-you-use/include-what-you-use-0.8 /opt/include-what-you-use/default
sudo ln -nf /opt/include-what-you-use/default/bin/include-what-you-use /opt/clang+llvm/default/bin/include-what-you-use
sudo ln -nf /opt/include-what-you-use/default/bin/iwyu_tool.py /opt/clang+llvm/default/bin/iwyu_tool.py

Integrated Development Environment (IDE)

Qt Creator

*-nix

wget http://download.qt.io/official_releases/qtcreator/4.3/4.4.1/qt-creator-opensource-linux-x86_64-4.4.1.run
chmod +x  qt-creator-opensource-linux-x86_64-4.4.1.run
./ qt-creator-opensource-linux-x86_64-4.4.1.run

Enter /opt/qt-creator/qt-creator-4.4.1 following in the Installation Folder dialog.
sudo ln -snf /opt/qt-creator/qt-creator-4.4.1 /opt/qt-creator/default

Compiler

GNAT GPL Ada

*-nix

Installation

wget http://mirrors.cdn.adacore.com/art/5739cefdc7a447658e0b016b
tar -xf gnat-gpl-2016-x86_64-linux-bin.tar.gz
./gnat-gpl-2016-x86_64-linux-bin/doinstall

Enter the following in the installation wizard:
/opt/gnat-gpl/gnat-gpl-2016

ln -snf /opt/gnat-gpl/gnat-gpl-2016 /opt/gnat-gpl/default

Test

gnatmake --version

Check the standard output:
GNATMAKE GPL 2016 (20160515-49)
Copyright (C) 1995-2016, Free Software Foundation, Inc.
This is free software; see the source for copying conditions.

There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

LLVM+Clang+compiler-rt

*-nix

Download release files

wget llvm-5.0.0.src.tar.xz
wget compiler-rt-5.0.0.src.tar.xz
wget cfe-5.0.0.src.tar.xz
wget clang-tools-extra-5.0.0.src.tar.xz

Extract downloaded release files

tar -xf llvm-5.0.0.src.tar.xz
tar -xf compiler-rt-5.0.0.src.tar.xz
tar -xf cfe-5.0.0.src.tar.xz
tar -xf clang-tools-extra-5.0.0.src.tar.xz

Create file structure for build

mv -f ./cfe-5.0.0.src ./clang
mv -f ./clang ./llvm-5.0.0.src/tools
mv -f ./compiler-rt-5.0.0.src ./compiler-rt
mv -f ./compiler-rt ./llvm-5.0.0.src/projects
mv -f ./clang-tools-extra-5.0.0.src ./extra
mv -f ./extra ./llvm-5.0.0.src/tools/clang/tools

Build out-of-source with CMake and install

cmake -G"Unix Makefiles" -Bllvm-5.0.0.build -Hllvm-5.0.0.src -DCMAKE_INSTALL_PREFIX=/opt/clang+llvm/clang+llvm-5.0.0
cmake --build llvm-5.0.0.build
sudo cmake --build llvm-5.0.0.build --target install
sudo ln -snf /opt/clang+llvm/llvm-5.0.0 /opt/llvm/default

Verify

Try to run a syntax check on a file using clang++:
clang++ -v main.cc -fsyntax-only

Check the standard/error output. If the output contains something similar to the
following, Clang is unable to detect libstd++:
main.cc:1:10: fatal error: 'iostream' file not found
#include <iostream>
         ^
1 error generated.

Check the include paths of GCC:
g++ -v -x c++ /dev/null -fsyntax-only

Add the include paths missing for Clang to the environment variable
CPLUS_INCLUDE_PATH:
export CPLUS_INCLUDE_PATH=/usr/include/c++/5:/usr/include/c++/5/x86_64-suse-linux:$CPLUS_INCLUDE_PATH

Check via the following command:
clang++ -v -x c++ /dev/null -fsyntax-only

Python

Pip Installs Python (pip)

*-nix

wget https://bootstrap.pypa.io/get-pip.py
sudo python get-pip.py
# Update all packages.
pip freeze > requirements.txt && pip install --upgrade -r requirements.txt && rm requirements.txt

Application

Network

Packet Sender

*-nix

wget https://github.com/dannagle/PacketSender/archive/v5.4.2.tar.gz
tar -xf PacketSender-5.4.2.tar.gz
cd PacketSender-5.4.2/src
qmake
make
sudo mkdir -p /opt/packetsender/packetsender-5.4.2/bin /opt/packetsender/packetsender-5.4.2/doc
sudo cp PacketSender /opt/packetsender/packetsender-5.4.2/bin
sudo cp ../LICENSE ../README.md /opt/packetsender/packetsender-5.4.2/doc
sudo ln -snf /opt/packetsender/packetsender-5.4.2 /opt/packetsender/default

GSL: Guideline Support Library
[33]: http://bzip.org
bzip2