No M105 after print

serial.log

2020-02-02 20:31:44,581 - Send: M105
2020-02-02 20:31:44,596 - Recv: ok B:22.1 /0.0 T0:22.2 /0.0
2020-02-02 20:31:49,583 - Send: M105
2020-02-02 20:31:49,597 - Recv: ok B:22.1 /0.0 T0:22.2 /0.0
2020-02-02 20:31:54,584 - Send: M105
2020-02-02 20:31:54,599 - Recv: ok B:22.1 /0.0 T0:22.2 /0.0
2020-02-02 20:31:59,587 - Send: M105
2020-02-02 20:31:59,601 - Recv: ok B:22.1 /0.0 T0:22.2 /0.0
2020-02-02 20:32:04,591 - Send: M105
2020-02-02 20:32:04,605 - Recv: ok B:22.1 /0.0 T0:22.2 /0.0
2020-02-02 20:32:09,592 - Send: M105
2020-02-02 20:32:09,604 - Recv: ok B:22.1 /0.0 T0:22.2 /0.0
2020-02-02 20:32:12,446 - Changing monitoring state from "Operational" to "Starting"
2020-02-02 20:32:12,501 - Send: N0 M110 N0*125
2020-02-02 20:32:12,506 - Recv: ok
2020-02-02 20:32:12,515 - Changing monitoring state from "Starting" to "Printing"
2020-02-02 20:32:12,532 - Send: N1 G28*18
2020-02-02 20:32:25,924 - Recv: ok
2020-02-02 20:32:25,938 - Changing monitoring state from "Printing" to "Finishing"
2020-02-02 20:32:26,015 - Send: N2 M400*37
2020-02-02 20:32:26,629 - Recv: ok
2020-02-02 20:32:26,632 - Send: N3 G0 X0 Y300*40
2020-02-02 20:32:26,638 - Recv: ok
2020-02-02 20:32:26,652 - Send: N4 M190 S0*108
2020-02-02 20:32:26,658 - Recv: ok
2020-02-02 20:32:26,663 - Send: N5 M104 S0*96
2020-02-02 20:32:26,669 - Recv: ok
2020-02-02 20:32:26,675 - Send: N6 M106 S255*99
2020-02-02 20:32:26,678 - Recv: ok
2020-02-02 20:32:26,682 - Send: N7 G91*22
2020-02-02 20:32:26,686 - Recv: ok
2020-02-02 20:32:26,691 - Send: N8 G0 Z40*95
2020-02-02 20:32:26,699 - Recv: ok
2020-02-02 20:32:26,704 - Send: N9 M18 X Y E*119
2020-02-02 20:32:40,635 - Recv: ok
2020-02-02 20:32:40,640 - Send: N10 M105*22
2020-02-02 20:32:40,656 - Recv: ok B:22.0 /0.0 T0:22.1 /0.0
2020-02-02 20:32:40,667 - Send: N11 M18 S1800*80
2020-02-02 20:32:40,835 - Recv: ok
2020-02-02 20:32:40,841 - Send: N12 G90*35
2020-02-02 20:32:40,845 - Recv: ok
2020-02-02 20:32:40,853 - Send: N13 G4 S15*104
2020-02-02 20:32:40,861 - Recv: ok
2020-02-02 20:32:40,867 - Send: N14 G92 E0*114
2020-02-02 20:32:40,872 - Recv: ok
2020-02-02 20:32:40,878 - Send: N15 M106 S0*83
2020-02-02 20:32:40,882 - Recv: ok
2020-02-02 20:32:40,889 - Send: N16 M107*18
2020-02-02 20:32:40,892 - Recv: ok
2020-02-02 20:32:40,898 - Changing monitoring state from "Finishing" to "Operational"
2020-02-02 20:34:10,979 - No response from printer after 3 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
2020-02-02 20:34:11,002 - Changing monitoring state from "Operational" to "Offline (Error: Too many consecutive timeouts, printer still connected and alive?)"
2020-02-02 20:34:11,051 - Connection closed, closing down monitor