Force RGB Color on M1 Mac

Force-RGB-Color-on-M1-Mac.md

Force RGB Color on M1 Mac

How to Force RGB Color Output instead of YPbPr on your M1 Apple Silicon Mac for an External Monitor.

This step-by-step video tutorial will guide you through the procedure of forcing RGB color output on your M1 Mac.

Here is the direct link to the video tutorial: https://www.youtube.com/watch?v=Z1EqH3fd0V4

The video also has Closed Captions (Subtitles) that you can enable, to make it easier to follow if needed.

Please note that you're doing any changes on your own risk.

Terminal commands used in the video

Here are each of the Terminal commands mentioned in the tutorial, so that you can just copy and paste them:

open /Library/Preferences

plutil -convert xml1

plutil -convert binary1

plutil -lint

The step-by-step procedure on how to force RGB Color Output on M1 and M2 based Macs with Terminal commands

1. Open Terminal and use this command to make Finder select the displays plist file:
   open -R /Library/Preferences/com.apple.windowserver.displays.plist

2. Drag and drop the com.apple.windowserver.displays.plist file to Desktop manually. Don't use the cp command, as it won't add your current user with writing privileges.

3. Convert the file to XML:
   plutil -convert xml1 ~/Desktop/com.apple.windowserver.displays.plist

4. Open the converted file with the default plain text editor (avoid using the built-in TextEdit app if possible, since it might modify the file and make it unreadable by the system)
   open -t ~/Desktop/com.apple.windowserver.displays.plist
   or
   open -a CotEditor.app ~/Desktop/com.apple.windowserver.displays.plist

5. Copy and paste the missing LinkDesription Key under the current display (check the screenshot below for an example of how it should look like):
   

				<key>LinkDescription</key>
				<dict>
					<key>BitDepth</key>
					<integer>8</integer>
					<key>EOTF</key>
					<integer>0</integer>
					<key>PixelEncoding</key>
					<integer>0</integer>
					<key>Range</key>
					<integer>1</integer>
				</dict>

6. Save the file and then convert it to binary again:
   plutil -convert binary1 ~/Desktop/com.apple.windowserver.displays.plist

7. Check if the plist file is valid:
   plutil -lint ~/Desktop/com.apple.windowserver.displays.plist

8. Open the /Library/Preferences/ folder again:
   open /Library/Preferences/

9. Drag and drop the updated com.apple.windowserver.displays.plist file from Desktop to the Library folder manually. Don't use the cp command, as it won't add your current user with writing privileges.

10. Right Click on the com.apple.windowserver.displays.plist file in the Library folder and click on Get Info

11. Check the boxes for Stationery and Locked.

12. Reboot the Mac.

That's it!

(Alternative) Terminal commands to force RGB Color Output on M1 and M2 based Macs and workaround for losing RGB color after waking up from sleep

1. Open Terminal

2. Paste the following commands to edit the User's displays plist file com.apple.windowserver.displays.[UUID].plist using the built-in PlistBuddy function in macOS:

/usr/libexec/PlistBuddy -c "add DisplaySets:Configs:DisplayConfig:DisplayConfig:DisplayConfig:LinkDescription:BitDepth integer" ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
/usr/libexec/PlistBuddy -c "set DisplaySets:Configs:DisplayConfig:DisplayConfig:DisplayConfig:LinkDescription:BitDepth 8" ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
/usr/libexec/PlistBuddy -c "add DisplaySets:Configs:DisplayConfig:DisplayConfig:DisplayConfig:LinkDescription:EOTF integer" ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
/usr/libexec/PlistBuddy -c "add DisplaySets:Configs:DisplayConfig:DisplayConfig:DisplayConfig:LinkDescription:PixelEncoding integer" ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist
/usr/libexec/PlistBuddy -c "add DisplaySets:Configs:DisplayConfig:DisplayConfig:DisplayConfig:LinkDescription:Range integer" ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist

3. Reboot your Mac
   
   

(Workaround) If your Mac loses RGB color after waking up from sleep mode, either Reboot your Mac (recommended) or use this Terminal command to stop the WindowServer and login again (not recommended):

sudo killall -HUP WindowServer

End result

The end result is having your M1 mac output RGB color to your external monitor instead of YPbPr, potentially making the colors more accurate and the text a bit more crisp, even on older 1080p monitors.

Hopefully this tutorial would be useful to someone.

Please feel free to ask in the comment section if you have any questions regarding this procedure.

Background

While doing a lot of testing on how the Dual-Cable workaround makes RGB to work on M1, I've discovered what changes it makes to macOS, and managed to create a more streamlined workaround without the need to use a second cable.

To make things easier, I've created a step-by-step video tutorial of the whole procedure that should force RGB color output on your M1 Mac connected to an external monitor, and works on an HDMI-to-HDMI cable connection.

Credits

Big thanks goes to the amazing community and all their help over the years to solve issues like this:
https://gist.github.com/ejdyksen/8302862
https://gist.github.com/adaugherity/7435890

Useful Sources

Apple Open Source Project Files for Displays and Graphics
https://opensource.apple.com/source/IOKitUser/IOKitUser-1445.60.1/graphics.subproj/IODisplayLib.c
https://opensource.apple.com/source/IOGraphics/IOGraphics-517.17/IOGraphicsFamily/IOFramebuffer.cpp.auto.html

How to Edit and Convert binary plist files
http://hints.macworld.com/article.php?story=20050803111126899
https://apple.stackexchange.com/questions/155393/how-to-beautify-binary-dict-files
https://discussions.apple.com/thread/1768480

How to Edit plist files using defaults and PlistBuddy
https://ss64.com/osx/defaults.html
https://github.com/mathiasbynens/dotfiles/blob/master/.macos

Apps based on this method

@sudowork has created an awesome script written in Phyton that automates the steps and checks for duplicate files.
You can find more info about it here: https://github.com/sudowork/fix_m1_rgb

@dangh has created an alernative script for fishshell.
You can find more info about it here: https://github.com/dangh/force-rgb.fish

@GetVladimir I've also created a Shortcut to Force RGB Color Output using the built-in Shortcuts app.
You can find how to create the Shortcut here: https://gist.github.com/GetVladimir/c89a26df1806001543bef4c8d90cc2f8?permalink_comment_id=4531552#gistcomment-4531552

@entropyconquers has created a script based on this method written in Phyton that automates the steps, makes a backup and checks for duplicate files.
You can find more info about it here: https://github.com/entropyconquers/Force-RGB-Color-on-M1-M2-Mac-Script

Additional notes

Multiple PixelEncoding and Range keys in the same plist file
Note that there might be multiple instances of the PixelEncoding and Range keys in the same file, one for each output of your monitor and for different AirPlay devices. You might need to update the integer on each one to get RGB color output on all displays.

Getting RGB color only before login
There might be multiple duplicate plist files with the same name in different locations.

Make sure that you only have the main modified file in:
/Library/Preferences

Then make a backup and remove duplicate displays plist files from these locations (if any):
~/Library/Preferences
or
/Users/username/Library/Preferences
and
/Users/username/Library/Preferences/ByHost

Please note that you'll need to have administrator privileges in order to modify the file in /Library/Preferences. Thanks goes to @keegandent and @StrategicalIT for pointing this out.

Updates regarding macOS Monterey

USB-C to DisplayPort
From what I've seen, it seems that macOS Monterey 12.0.1 finally outputs RGB color by default on some monitors when using USB-C to DisplayPort cable on M1 Apple Silicone Macs.

You might need to make a backup and delete these 2 files:
/Library/Preferences/com.apple.windowserver.displays.plist
and
/Users/yourname/Library/Preferences/ByHost/com.apple.windowserver.displays.[UDID].plist

Restart your Mac and it should properly output RGB color on the monitor on the next boot.

HDMI to HDMI
The situation with HDMI seems to got a bit more complicated. Now the whole section for the LinkDescription might be missing from the com.apple.windowserver.displays.plist on a clean install and doesn't seem to be recreated when rotating the screen either.

Luckily, the solution still works, but you might need to manually add this whole section in the displays plist file:

					<key>LinkDescription</key>
					<dict>
						<key>BitDepth</key>
						<integer>8</integer>
						<key>EOTF</key>
						<integer>0</integer>
						<key>PixelEncoding</key>
						<integer>0</integer>
						<key>Range</key>
						<integer>1</integer>
					</dict>

The section usually goes right under the CurrentInfo key, and it should look something like this:

This should get your RGB color output working on M1 Mac mini, even when connected with HDMI to HDMI cable.

Multiple monitors when one them is using HDMI to HDMI
Additional thanks goes to @somogyi-ede who tested this with multiple monitors and confirmed that the LinkDescription key needs to be added under each monitor instance in order for all of them to receive RGB color output. Link to the comment

Updates regarding macOS 13 Ventura

USB-C to DisplayPort
The macOS 13 Ventura beta seems to outputs RGB color by default on some monitors when using USB-C to DisplayPort cable on M1 Apple Silicone Macs.

You might need to make a backup and delete these 2 files:
/Library/Preferences/com.apple.windowserver.displays.plist
and
/Users/yourname/Library/Preferences/ByHost/com.apple.windowserver.displays.[UDID].plist

Restart your Mac and it should properly output RGB color on the monitor on the next boot.

HDMI to HDMI
Similar as macOS Monterey, the situation with HDMI on macOS Venturs seems a bit more complicated. Usually the whole section for the LinkDescription might be missing from the com.apple.windowserver.displays.plist on a clean install and doesn't seem to be recreated when rotating the screen either.

Luckily, the solution still works, and you still need to manually add this whole section in the displays plist file:

					<key>LinkDescription</key>
					<dict>
						<key>BitDepth</key>
						<integer>8</integer>
						<key>EOTF</key>
						<integer>0</integer>
						<key>PixelEncoding</key>
						<integer>0</integer>
						<key>Range</key>
						<integer>1</integer>
					</dict>

The section usually goes right under the CurrentInfo key, and it should look something like this:

This should get your RGB color output working on M1 Mac mini, even when connected with HDMI to HDMI cable.

(Optional) Lock the plist file and set it as stationary
After the macOS Ventura 13.3 update, the plist file seems to get overwritten on reboot.

After you make the edits in the file, you can try setting the file /Library/Preferences/com.apple.windowserver.displays.plist as Stationery pad and Locked, so that it doesn't get overwritten on every reboot

To do this, right click on the plist file, click on Get Info and check the boxes next to Stationery pad and Locked

This requires further testing and might cause some issues, like not being able to remember new resolutions or display settings. Please note that you're making any changes at your own risk.

Updates regarding macOS 14 Sonoma Beta

USB-C to DisplayPort
The macOS 14 Sonoma seems to outputs RGB color by default when using USB-C to DisplayPort cable.

HDMI to HDMI
The macOS 14 Sonoma seems to outputs YCbCr color by default when using HDMI to HDMI cable.

• Forcing RGB Color Output still seems to work with the original procedure of modifying the plist files

• Modifying the display plist files still works with the alternative version

• After the plist files are modified, putting the Mac to sleep and waking it, it seem to keep the RGB Color output (this seems to be fixed at least on a M1 Mac mini)

If you have any additional questions, please feel free to contact me.

@GetVladimir thanks for your message and the hints, I will take a look!

I tried everything, and ended up ordering a Lenovo DisplayLink dock (40AF). Crazy and unnecessary cost, and extra delay. But as it's only running in RGB, my combination now works. If someone finds a good way to do this, I'd be happy to revert back, however, right now, I don't want to spend more time on it. I don't get why Apple does not give more control to the user, to enforce the usage of RGB 🙃 ...

@gammelby you're welcome. Let us know how it goes.

@exetico thank you for the update and glad to hear that it works with the DisplayLink dock.

You're right, it would be so easy for them to add an option menu to choose between RGB and YCbCr, same as they already have on the Apple TV Settings.

At the very least, it should be set to default to RGB whenever possible.

I finally got this working. The trick for me was to make the edit in thebyHost folder file instead of the suggested one. This file seems to override everything else and deleting it doesn't work because it also loses my display settings (e.g scaling, arrangement, refresh rate...). If I then set my settings back to what I need, the file gets regenerated so it overrides the changes I made to the top level plist file.

What I also found very confusing was figuring out what the right display to apply the fix to is. This is complicated because plugging in the same display via different methods (HDMI, usb hdmi dongle, usb) causes the system to create separate entries that look correct but aren't. What worked for me was using Color Sync Utility.app to get the UUID of the display the system is currently using, then looking for the entry in the file that matches and making the changes there.

@albertmonzo thank you so much for your comment and glad to hear that you got RGB Color Output working.

That is a great suggestion for using the built-in Color Sync Utility.app to determine which is the correct UUID of the monitor port that needs to be modified.

And you're right, each port or connection of the monitor has a different UUID.

To clarify, it's not just different ports of the monitor, but even different ways of connecting to the same port. In my case, most of the confusion happened because I had previously connected the monitor via HDMI directly to the HDMI port, but I'm now using a usb-c to HDMI cable (to get 4k@120hz on an M1 Pro). The act of having connected it before created this separate entry that looks identical except the UUID is different...

@albertmonzo thank you for the clarification and additional info.

You're right. That also explains why people that use a dock sometimes seem to get a different UUID on every reconnect, which make is really difficult to modify the correct entry for RGB

Not sure if it was mentioned before, but for those suffering from the blurry image issue on external displays with an M1/M2/M3/.. MBP and DisplayLink-based dock station - enabling "Experimental 3008x and 2560x modes" option in DisplayLink seems to do the trick (https://support.displaylink.com/knowledgebase/articles/1993915)

@maxskorr thank you for your comment and the info.

I haven't seen this feature before. Good info to know for anyone using a DisplayLink based Dock.

Forcing RGB Color Output still seems to work with the original procedure of modifying the plist files

No, it doesn't. I followed the instructions to the letter on Sonoma and it didn't do shit. The "alternate" method was also a waste of time. Stuck with shitty TV colours on a desktop monitor because I'm forced to use the worst operating system ever conceived.

@GetVladimir

Thx for this guide, this is helpful, although I still couldn't make it work :/

A couple of problems:

Copy and paste the missing LinkDesription Key under the current display

How do I find "current display"? I have (for some unknown reason) 27 CurrentInfos:

/Users/janbet  > plutil -convert xml1 -o - /Library/Preferences/com.apple.windowserver.displays.plist | grep CurrentInfo | wc -l     
      27

(I would love to just reset my display settings to factory settings, but if I remove this file then it is again there after reboot, because the same file is in /System/Volumes/Preboot/[many characters]/Library/Preferences directory and I guess it's copied from there. Any solution to this?)

Also, regarding this method - I see message File Doesn't Exist, Will Create: /Users/janbet/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist and things still don't work (after reboot). I have a new file in my user Library/Preferences/ByHost that has this single LinkDescription somewhere but otherwise is a copy of the file from /Library/Preferences directory.

I have M3 Pro + Sonoma 14.4.1.

@johny-b Thank you so much for your comment and I'm glad if the guide is helpful.

If you use a dock, it's very possible that it creates a new current display or UUID every time you connect the M3 Pro to it.

There is an excellent suggestion by @albertmonzo here that suggests to use the Color Sync Utility.app in order to find the UUID of the current connection.

Although, if it keeps changing the UUID, it's likely that it won't work after reboot or reconnect. If possible, it might be for the best to use a dedicated USB-C to DisplayPort cable for the Monitor, even if you need to plug 2 cables each time.