GluTbl

echo "Usb power status:"
echo ""
sudo cat /sys/bus/usb/devices/*/power/level
echo ""
echo ""

while true; do
    read -p "Do you wish to change usb power status? " yn
    case $yn in
        [Yy]* ) make install; break;;

GluTbl

sudo apt update
sudo apt-get install tigervnc-scraping-server
mkdir -p ~/.vnc
vncpasswd
x0vncserver -passwordfile ~/.vnc/passwd -display :0

GluTbl

#!/usr/bin/python3

"""
You need to know the "Z_axis" value of the last saved value
You can save it using the serial data transmited by the 3D printer

For me i use qprompt and pass some data and extract the z axis

"""

GluTbl

start_millis =int(datetime.strptime(start_time, "%d-%m-%Y-%H:%M:%S").replace(tzinfo=timezone.utc).timestamp() *1000)

GluTbl

All honour goes to http://www.blaicher.com/2013/01/accessing-an-encrypted-full-disc-image-lukslvm/

---

So I typically use a full disc encryption with LVM over LUKS. So assume you have got an image from your harddisk via

dd if=/dev/sda of=image.img

GluTbl

//For digital pins
#define DIGITAL_PIN_COUNT 12
char *digital_pins[] = {"D0", "D1", "D2" , "D3" , "D4" , "D5", "D6", "D7", "D8", "D9", "D10", "D11", "D12", "D13"};
int *valid_digital_pins[] = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13};
////////////////////////

//For Aanlogue pin
#define ANALOG_PIN_COUNT 6

GluTbl

import shlex
import subprocess

def execute_command(command: str, path=None):
    command_splited = shlex.split(command)
    if path is None:
        process = subprocess.Popen(command_splited)
    else:
        process = subprocess.Popen(command_splited, cwd=path)
    process.communicate()

GluTbl

################Executing Command################


def execution_timer(time_out, cmd_process):
    kill = lambda process: process.kill()
    my_timer = Timer(time_out, kill, [cmd_process])
    try:
        my_timer.start()
        stdout, stderr = cmd_process.communicate()
    finally:

GluTbl

#Source code copied from https://github.com/andrisdru/image2stl



#pip3 install numpy-stl pillow argparse
import argparse
import numpy as np
from stl import mesh
from PIL import Image

GluTbl

import os
import shutil
import sys
import traceback
import uuid
import time
import cv2
import numpy as np
from fpdf import FPDF
from pdf2image import convert_from_path, pdfinfo_from_path