gistfile1.txt

NAND:  512 MiB
MMC:   FSL_SDHC: 0
Loading Environment from NAND... OK
In:    serial
Out:   serial
Err:   serial
Model: Toradex Colibri iMX6ULL 512MB Wi-Fi / BT IT V1.1A, Serial# 06398886
Net:   Could not get PHY for FEC1: addr 2
eth-1: ethernet@020b4000
Hit any key to stop autoboot:  0
Booting from NAND...
ubi0: default fastmap pool size: 200
ubi0: default fastmap WL pool size: 100
ubi0: attaching mtd5
ubi0: scanning is finished
ubi0: attached mtd5 (name "ubi", size 508 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 4058, bad PEBs: 6, corrupted PEBs: 0
ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1471099811
ubi0: available PEBs: 2, total reserved PEBs: 4056, PEBs reserved for bad PEB handling: 74
ubi0 error: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from PEB 3:4096, read 126976 bytes
UBIFS error (ubi0:0 pid 0): ubifs_scan: bad node
ubi0 error: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from PEB 3:4096, read 126976 bytes
ubi0 error: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from PEB 4:4096, read 126976 bytes
ubi0 error: ubi_io_read: error -74 (ECC error) while reading 11 bytes from PEB 10:8192, read 11 bytes
UBIFS error (ubi0:0 pid 0): ubifs_leb_read: reading 11 bytes from LEB 8:4096 failed, error -74
Error reading superblock on volume 'ubi0:rootfsa' errno=-74!
ubifsmount - mount UBIFS volume

Usage:
ubifsmount <volume-name>
    - mount 'volume-name' volume
MMC: no card present
starting USB...
Bus usb@02184000: USB EHCI 1.00
Bus usb@02184200: USB EHCI 1.00
scanning bus usb@02184000 for devices... 1 USB Device(s) found
scanning bus usb@02184200 for devices... 1 USB Device(s) found
    scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
ethernet@020b4000 Waiting for PHY auto negotiation to complete.... done
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
DHCP client bound to address 192.168.0.160 (5779 ms)
Using ethernet@020b4000 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.160
Filename 'boot.scr.uimg'.
Load address: 0x87000000
Loading: T
Abort
BOOTP broadcast 1
DHCP client bound to address 192.168.0.160 (16 ms)
Using ethernet@020b4000 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.160
Filename 'boot.scr.uimg'.
Load address: 0x81000000
Loading: *
Abort
Colibri iMX6ULL #