Last active
January 25, 2020 16:57
-
-
Save Gro-Tsen/f40f122507954fb0cd987fa7f8f3e67a to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
ACTION=="add", SUBSYSTEM=="net", ATTRS{idVendor}=="0cf3", ATTRS{idProduct}=="9271", ENV{DMADORE_WIFI_STICK}="1", RUN+="/root/bin/wifi-stick-added-netlevel" | |
ACTION=="remove", SUBSYSTEM=="net", ENV{DMADORE_WIFI_STICK}=="1", RUN+="/root/bin/wifi-stick-removed-netlevel" |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
random: Trying to read entropy from /dev/random | |
Configuration file: /etc/hostapd/hostapd.conf | |
Line 55: DEPRECATED: 'dump_file' configuration variable is not used anymore | |
ctrl_interface_group=0 | |
rfkill: initial event: idx=23 type=1 op=0 soft=0 hard=0 | |
nl80211: TDLS supported | |
nl80211: TDLS external setup | |
nl80211: Supported cipher 00-0f-ac:1 | |
nl80211: Supported cipher 00-0f-ac:5 | |
nl80211: Supported cipher 00-0f-ac:2 | |
nl80211: Supported cipher 00-0f-ac:4 | |
nl80211: Supported cipher 00-0f-ac:10 | |
nl80211: Supported cipher 00-0f-ac:8 | |
nl80211: Supported cipher 00-0f-ac:9 | |
nl80211: Supported cipher 00-0f-ac:6 | |
nl80211: Supported cipher 00-0f-ac:13 | |
nl80211: Supported cipher 00-0f-ac:11 | |
nl80211: Supported cipher 00-0f-ac:12 | |
nl80211: Using driver-based off-channel TX | |
nl80211: Use separate P2P group interface (driver advertised support) | |
nl80211: interface wlan0 in phy phy23 | |
nl80211: Set mode ifindex 29 iftype 3 (AP) | |
nl80211: Failed to set interface 29 to mode 3: -16 (Device or resource busy) | |
nl80211: Try mode change after setting interface down | |
nl80211: Set mode ifindex 29 iftype 3 (AP) | |
nl80211: Mode change succeeded while interface is down | |
nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=0 | |
nl80211: Subscribe to mgmt frames with AP handle 0x564aed4430e0 | |
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x564aed4430e0 match= | |
nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x564aed4430e0 match= | |
nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x564aed4430e0 match= | |
nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x564aed4430e0 match= | |
nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x564aed4430e0 match= | |
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x564aed4430e0 match= | |
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x564aed4430e0 match= | |
nl80211: deinit ifname=wlan0 disabled_11b_rates=0 | |
nl80211: Remove monitor interface: refcount=0 | |
nl80211: Remove beacon (ifindex=29) | |
netlink: Operstate: ifindex=29 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) | |
nl80211: Set mode ifindex 29 iftype 2 (STATION) | |
nl80211: Failed to set interface 29 to mode 2: -16 (Device or resource busy) | |
nl80211: Try mode change after setting interface down | |
nl80211: Set mode ifindex 29 iftype 2 (STATION) | |
nl80211: Mode change succeeded while interface is down | |
nl80211: Teardown AP(wlan0) - device_ap_sme=0 use_monitor=0 | |
nl80211: Unsubscribe mgmt frames handle 0x8888dec265ccb869 (AP teardown) | |
nl80211 driver initialization failed. | |
hostapd_interface_deinit_free(0x564aed444720) | |
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1 | |
hostapd_interface_deinit(0x564aed444720) | |
wlan0: interface state UNINITIALIZED->DISABLED | |
hostapd_bss_deinit: deinit bss wlan0 | |
wlan0: AP-DISABLED | |
hostapd_cleanup(hapd=0x564aed445680 (wlan0)) | |
hostapd_free_hapd_data: Interface wlan0 wasn't started | |
hostapd_interface_deinit_free: driver=(nil) drv_priv=(nil) -> hapd_deinit | |
hostapd_interface_free(0x564aed444720) | |
hostapd_interface_free: free hapd 0x564aed445680 | |
hostapd_cleanup_iface(0x564aed444720) | |
hostapd_cleanup_iface_partial(0x564aed444720) | |
hostapd_cleanup_iface: free iface=0x564aed444720 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
random: Trying to read entropy from /dev/random | |
Configuration file: /etc/hostapd/hostapd.conf | |
Line 55: DEPRECATED: 'dump_file' configuration variable is not used anymore | |
ctrl_interface_group=0 | |
rfkill: initial event: idx=22 type=1 op=0 soft=0 hard=0 | |
nl80211: TDLS supported | |
nl80211: TDLS external setup | |
nl80211: Supported cipher 00-0f-ac:1 | |
nl80211: Supported cipher 00-0f-ac:5 | |
nl80211: Supported cipher 00-0f-ac:2 | |
nl80211: Supported cipher 00-0f-ac:4 | |
nl80211: Supported cipher 00-0f-ac:10 | |
nl80211: Supported cipher 00-0f-ac:8 | |
nl80211: Supported cipher 00-0f-ac:9 | |
nl80211: Supported cipher 00-0f-ac:6 | |
nl80211: Supported cipher 00-0f-ac:13 | |
nl80211: Supported cipher 00-0f-ac:11 | |
nl80211: Supported cipher 00-0f-ac:12 | |
nl80211: Using driver-based off-channel TX | |
nl80211: Use separate P2P group interface (driver advertised support) | |
nl80211: interface wlan0 in phy phy22 | |
nl80211: Set mode ifindex 28 iftype 3 (AP) | |
nl80211: Failed to set interface 28 to mode 3: -16 (Device or resource busy) | |
nl80211: Try mode change after setting interface down | |
nl80211: Set mode ifindex 28 iftype 3 (AP) | |
nl80211: Mode change succeeded while interface is down | |
nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=0 | |
nl80211: Subscribe to mgmt frames with AP handle 0x5561541b10e0 | |
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x5561541b10e0 match= | |
nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x5561541b10e0 match= | |
nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x5561541b10e0 match= | |
nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x5561541b10e0 match= | |
nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x5561541b10e0 match= | |
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x5561541b10e0 match= | |
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x5561541b10e0 match= | |
nl80211: Add own interface ifindex 5 | |
nl80211: if_indices[16]: 5 | |
nl80211: Add own interface ifindex 28 | |
nl80211: if_indices[16]: 5 28 | |
nl80211: Adding interface wlan0 into bridge br0 | |
phy: phy22 | |
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) | |
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE | |
Previous country code 98, new country code FR | |
Continue interface setup after channel list update | |
ctrl_iface not configured! |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
interface=wlan0 | |
bridge=br0 | |
driver=nl80211 | |
logger_syslog=-1 | |
logger_syslog_level=3 | |
logger_stdout=-1 | |
logger_stdout_level=3 | |
dump_file=/tmp/hostapd.dump | |
ctrl_interface=/var/run/hostapd | |
ctrl_interface_group=0 | |
ssid=Madore | |
country_code=FR | |
hw_mode=g | |
channel=1 | |
beacon_int=250 | |
dtim_period=3 | |
max_num_sta=30 | |
rts_threshold=2347 | |
fragm_threshold=2346 | |
macaddr_acl=0 | |
auth_algs=1 | |
ignore_broadcast_ssid=0 | |
wmm_enabled=1 | |
wmm_ac_bk_cwmin=4 | |
wmm_ac_bk_cwmax=10 | |
wmm_ac_bk_aifs=7 | |
wmm_ac_bk_txop_limit=0 | |
wmm_ac_bk_acm=0 | |
wmm_ac_be_aifs=3 | |
wmm_ac_be_cwmin=4 | |
wmm_ac_be_cwmax=10 | |
wmm_ac_be_txop_limit=0 | |
wmm_ac_be_acm=0 | |
wmm_ac_vi_aifs=2 | |
wmm_ac_vi_cwmin=3 | |
wmm_ac_vi_cwmax=4 | |
wmm_ac_vi_txop_limit=94 | |
wmm_ac_vi_acm=0 | |
wmm_ac_vo_aifs=2 | |
wmm_ac_vo_cwmin=2 | |
wmm_ac_vo_cwmax=3 | |
wmm_ac_vo_txop_limit=47 | |
wmm_ac_vo_acm=0 | |
ap_max_inactivity=600 | |
ieee80211n=1 | |
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40] | |
eapol_key_index_workaround=0 | |
eap_server=0 | |
wpa=3 | |
wpa_passphrase=REDACTED | |
wpa_key_mgmt=WPA-PSK | |
wpa_pairwise=TKIP | |
rsn_pairwise=CCMP | |
wpa_group_rekey=10800 | |
wpa_gmk_rekey=86400 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
ID_BUS=usb | |
ACTION=add | |
ID_VENDOR_FROM_DATABASE=Qualcomm Atheros Communications | |
ID_NET_DRIVER=ath9k_htc | |
SEQNUM=4879 | |
USEC_INITIALIZED=68182946939 | |
ID_SERIAL_SHORT=12345 | |
ID_USB_DRIVER=ath9k_htc | |
TAGS=:systemd: | |
IFINDEX=36 | |
ID_TYPE=generic | |
ID_USB_CLASS_FROM_DATABASE=Vendor Specific Class | |
ID_USB_SUBCLASS_FROM_DATABASE=Vendor Specific Subclass | |
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/net/wlan0 | |
ID_OUI_FROM_DATABASE=TP-LINK TECHNOLOGIES CO.,LTD. | |
DMADORE_WIFI_STICK=1 | |
ID_MODEL_ENC=USB2.0\x20WLAN | |
ID_USB_INTERFACES=:ff0000: | |
ID_MODEL=USB2.0_WLAN | |
SUBSYSTEM=net | |
ID_SERIAL=ATHEROS_USB2.0_WLAN_12345 | |
ID_MODEL_ID=9271 | |
ID_NET_NAME_MAC=wlxc04a001e4cd4 | |
ID_MODEL_FROM_DATABASE=AR9271 802.11n | |
ID_PATH=pci-0000:00:14.0-usb-0:4:1.0 | |
ID_USB_PROTOCOL_FROM_DATABASE=Vendor Specific Protocol | |
ID_VENDOR_ENC=ATHEROS | |
ID_NET_NAME=wlp0s20f0u4 | |
INTERFACE=wlan0 | |
ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0 | |
ID_VENDOR=ATHEROS | |
PWD=/ | |
DEVTYPE=wlan | |
ID_USB_INTERFACE_NUM=00 | |
ID_VENDOR_ID=0cf3 | |
ID_NET_NAME_PATH=wlp0s20f0u4 | |
ID_NET_LINK_FILE=/lib/systemd/network/99-default.link | |
SYSTEMD_ALIAS=/sys/subsystem/net/devices/wlan0 | |
ID_REVISION=0108 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
hostapd fails when run from udev, works fine when started manually: WHY??? | |
/etc/udev/rules.d/99-wifi-stick.rules runs /root/bin/wifi-stick-added-netlevel when wlan0 interface appears: | |
this script is run as expected, the interface is present, but hostapd produces the output in hostapd-debug-bad.log and exits | |
Manually running `/usr/sbin/hostapd -dd -B -P "/run/hostapd.wlan0.pid" /etc/hostapd/hostapd.conf`, OTOH, works, | |
and produces the output in hostapd-debug-good.log (and hostapd continues running). |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#! /bin/sh | |
logger -p local0.notice -- "Wifi stick added (network-level script, simplified script, just starting hostapd)" | |
ip link set dev wlan0 up | |
iw reg set fr | |
(sleep 5 ; /usr/sbin/hostapd -dd -B -P "/run/hostapd.wlan0.pid" /etc/hostapd/hostapd.conf > /tmp/hostapd-debug.log 2>&1) & | |
exit 0 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#! /bin/sh | |
if [ -e "/run/hostapd.wlan0.pid" ]; then | |
logger -p local0.notice -- "Wifi stick removed (network-level simplified script, just killing hostapd)" | |
kill $(cat "/run/hostapd.wlan0.pid") | |
else | |
logger -p local0.notice -- "Wifi stick removed (network-level simplified script, nothing to kill)" | |
fi | |
exit 0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
See https://twitter.com/gro_tsen/status/1221110994853908480 for discussion.