Skip to content

Instantly share code, notes, and snippets.

@HackingGate
Last active November 20, 2024 19:56
Show Gist options
  • Save HackingGate/b75ac856397075756ea878380c5b848c to your computer and use it in GitHub Desktop.
Save HackingGate/b75ac856397075756ea878380c5b848c to your computer and use it in GitHub Desktop.
upgrade ipk on OpenWrt
VERSION=19.07.7
# Download imagebuilder for R7800.
aria2c -c -x4 -s4 https://downloads.openwrt.org/releases/${VERSION}/targets/ipq806x/generic/openwrt-imagebuilder-${VERSION}-ipq806x-generic.Linux-x86_64.tar.xz
# Extract & remove used file & cd to the directory
tar -xvf openwrt-imagebuilder-${VERSION}-ipq806x-generic.Linux-x86_64.tar.xz
rm openwrt-imagebuilder-${VERSION}-ipq806x-generic.Linux-x86_64.tar.xz
cd openwrt-imagebuilder-${VERSION}-ipq806x-generic.Linux-x86_64/
# Use https when making image
sed -i 's/http:/https:/g' repositories.conf
# Make all kernel modules built-in
sed -i -e "s/=m/=y/g" build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/linux-ipq806x_generic/linux-*/.config
# Run the final build configuration
make image PROFILE=netgear_r7800 \
PACKAGES="ca-bundle ca-certificates libustream-openssl -ppp -ppp-mod-pppoe \
uhttpd uhttpd-mod-ubus libiwinfo-lua luci-base luci-app-firewall luci-mod-admin-full luci-theme-bootstrap \
-wpad-mini -wpad-basic wpad-openssl usbutils block-mount e2fsprogs samba4-server luci-app-samba4 \
aria2 luci-app-aria2 ariang stubby curl wget tcpdump kmod-fs-ext4 kmod-usb-storage kmod-usb-storage-uas"
# list result
ls $PWD/bin/targets/ipq806x/generic
# To use opkg via https
opkg update
opkg install ca-bundle ca-certificates libustream-openssl curl wget
sed -i 's/http:/https:/g' /etc/opkg/distfeeds.conf
# DoH with Dnsmasq and https-dns-proxy
# https://openwrt.org/docs/guide-user/services/dns/doh_dnsmasq_https-dns-proxy
opkg install https-dns-proxy luci-app-https-dns-proxy
# pkg-upgrade.sh
wget https://gist.github.com/HackingGate/b75ac856397075756ea878380c5b848c/raw/db404b6028b9136b47192ce90f3520e97a3faa3e/pkg-upgrade.sh
chmod +x pkg-upgrade.sh
./pkg-upgrade.sh
# sys-upgrade.sh
wget https://gist.github.com/HackingGate/b75ac856397075756ea878380c5b848c/raw/725c991f7286400e4f0d6ae5f993f8dd17caca90/sys-upgrade.sh
chmod +x sys-upgrade.sh
./sys-upgrade.sh
# Capturing packets
opkg install tcpdump
# Deploy WPA3 Wi-Fi
opkg remove wpad-mini wpad-basic
opkg install wpad-openssl
/etc/init.d/network restart
# Using storage devices
opkg update
opkg install kmod-usb-storage
opkg install kmod-usb-storage-uas
opkg install usbutils
lsusb -t
opkg install block-mount
block info | grep "/dev/sd"
lsusb -t
opkg install e2fsprogs
opkg install kmod-fs-ext4
block detect | uci import fstab
uci set fstab.@mount[-1].enabled='1'
uci set fstab.@global[0].check_fs='1'
uci commit fstab
uci show fstab
service fstab boot
# SMB Samba4
opkg install samba4-server
opkg install luci-app-samba4
# Aira2 and ariang
opkg install aria2
opkg install luci-app-aria2
opkg install ariang
#!/bin/sh
set -e
# Force HTTPS
sed -i 's/http:/https:/g' /etc/opkg/distfeeds.conf
# Update packages
opkg update
for ipk in $(opkg list-upgradable | awk '$1!~/^base-files|^kmod|^Multiple/{print $1}'); do
opkg upgrade $ipk
done
# Download bt trackers
TRACKERS=`curl -s https://raw.githubusercontent.com/ngosang/trackerslist/master/trackers_best.txt \
| tr '\n' ' ' \
| sed 's/ *$//'`
echo "Updating /etc/config/aria2 bt_tracker"
# Delete config
sed -i "/list bt_tracker/d" /etc/config/aria2
# Append config
echo -e "\tlist bt_tracker '$TRACKERS'" | tee -a /etc/config/aria2
# Download netboot.xyz
wget https://boot.netboot.xyz/ipxe/netboot.xyz.efi -O /root/tftp/netboot.xyz.efi
#!/bin/sh
set -e
OPENWRT_TAG=`git ls-remote git://github.com/openwrt/openwrt.git | grep -E -o 'v[0-9]+\.[0-9]+\.[0-9]+' | tail -1`
OPENWRT_VERSION=`echo ${OPENWRT_TAG} | grep -E -o '[0-9]+\.[0-9]+\.[0-9]+'`
rm -f *.manifest manifest.diff
# Use sed remove vlmcsd
opkg list-installed | sed '/vlmcsd/d' | tee list-installed.manifest
wget https://downloads.hackinggate.com/openwrt-${OPENWRT_VERSION}-ipq806x-generic-netgear-r7800/openwrt-${OPENWRT_VERSION}-ipq806x-generic-device-netgear-r7800.manifest
diff openwrt-${OPENWRT_VERSION}-ipq806x-generic-device-netgear-r7800.manifest list-installed.manifest | tee manifest.diff
FILE1_LINES=`cat manifest.diff | grep '<' | wc -l`
FILE2_LINES=`cat manifest.diff | grep '>' | wc -l`
# n1 -ge n2 True if the integer n1 is algebraically greater than or equal to the integer n2.
# n1 -gt n2 True if the integer n1 is algebraically greater than the integer n2.
if [ ${FILE1_LINES} -ge 0 ] && [ ${FILE1_LINES} -eq ${FILE2_LINES} ]
then
echo "Upgrading to ${OPENWRT_TAG}"
rm -f openwrt-${OPENWRT_TAG}-ipq806x-generic-netgear_r7800-squashfs-sysupgrade.bin
wget https://downloads.hackinggate.com/openwrt-${OPENWRT_VERSION}-ipq806x-generic-netgear-r7800/openwrt-${OPENWRT_VERSION}-ipq806x-generic-netgear_r7800-squashfs-sysupgrade.bin
# -o attempt to preserve all changed files in /, except those
# from packages but including changed confs.
sysupgrade -o openwrt-${OPENWRT_VERSION}-ipq806x-generic-netgear_r7800-squashfs-sysupgrade.bin
fi
@HackingGate
Copy link
Author

SMB Samba4

opkg install samba4-server
opkg install luci-app-samba4

@HackingGate
Copy link
Author

HackingGate commented Aug 8, 2019

Aira2 and ariang

opkg install aria2
opkg install luci-app-aria2
opkg install ariang

@HackingGate
Copy link
Author

HackingGate commented Aug 15, 2019

Cloudflare DDNS

opkg install ddns-scripts
opkg install ddns-scripts-cloudflare
opkg install luci-app-ddns

DNS requests via TCP not supported
BusyBox's nslookup and hostip do not support to specify to use TCP instead of default UDP when requesting DNS server!

  • You should install 'bind-host' or 'knot-host' or 'drill' package for DNS requests.
  • You should install 'bind-host' or 'knot-host' or 'drill' package for DNS requests.
opkg install bind-host

@HackingGate
Copy link
Author

HackingGate commented Oct 20, 2019

Enable WPA2-Enterprise

As of Oct 20, 2019. OpenWrt does not support WPA3-EAP.
You will use WAP2-EAP instead.
You will need iOS 13 or later. As far as I know iOS 12.4 will only work with WPA-EAP NOT WPA2-EAP.

Install freeradius3 on OpenWrt if you don't have a RADIUS server

opkg update
eval $(opkg find freeradius3* | sed 's/ - .*//' | sed 's/^/opkg install /')

Rest of the tutorial here:
https://openwrt.org/docs/guide-user/network/wifi/freeradius

@HackingGate
Copy link
Author

opkg install acme
opkg install luci-app-acme
opkg install socat

Screen Shot 2019-10-21 at 10 07 40

Update acme.sh to the latest
https://forum.openwrt.org/t/solved-luci-app-acme-lets-encrypt-and-connection-reset-by-peer/9657/2

Screen Shot 2019-10-21 at 10 03 29

@HackingGate
Copy link
Author

HackingGate commented Jul 24, 2020

Recently I ran out of 80MB flash storage of my R7800.
So I tried ImageBuilder

Here's what I have done

Preparation

Download imagebuilder-19.07.3 for R7800.

aria2c -c -x4 -s4 https://downloads.openwrt.org/releases/19.07.3/targets/ipq806x/generic/openwrt-imagebuilder-19.07.3-ipq806x-generic.Linux-x86_64.tar.xz

Extract & remove used file & cd to the directory

tar -xvf openwrt-imagebuilder-19.07.3-ipq806x-generic.Linux-x86_64.tar.xz
rm openwrt-imagebuilder-19.07.3-ipq806x-generic.Linux-x86_64.tar.xz
cd openwrt-imagebuilder-19.07.3-ipq806x-generic.Linux-x86_64/

The command will make your own R7800 image (RUN THE FINAL BUILD COMMAND)

make image PROFILE=netgear_r7800

Configuration

Use https when making image

sed -i 's/http:/https:/g' repositories.conf

You will need some additional packages to make opkg over https work

make image PROFILE=netgear_r7800 \
PACKAGES="ca-bundle ca-certificates libustream-openssl"

I will do some recommendations from Saving firmware space to reduce firmware size

Excluding packages

I live in Japan and my ISP came with IPv6-plus I don't need PPPoE.

make image PROFILE=netgear_r7800 \
PACKAGES="ca-bundle ca-certificates libustream-openssl -ppp -ppp-mod-pppoe"

Sometimes using LuCI is easier to maintenance your router so I'm definitely going to have it

make image PROFILE=netgear_r7800 \
PACKAGES="ca-bundle ca-certificates libustream-openssl -ppp -ppp-mod-pppoe \
uhttpd uhttpd-mod-ubus libiwinfo-lua luci-base luci-app-firewall luci-mod-admin-full luci-theme-bootstrap"

Making all kernel modules built-in

Oh I use a lot of kernel modules. Instead of turning them on one by one. Why not just enable all?

sed -i -e "s/=m/=y/g" build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/linux-ipq806x_generic/linux-4.14.180/.config

Modifying build configuration variables

I'm not quite sure about that... Just pass.

Replace LuCI icons with a blank pixel

Looks like I have to clone the sources so that I can replace the images. That will make a lot of time to compile... Just pass.

Adding more packages

Since we enabled all kernel modules so when don't need to install kmod anymore.

make image PROFILE=netgear_r7800 \
PACKAGES="ca-bundle ca-certificates libustream-openssl -ppp -ppp-mod-pppoe \
uhttpd uhttpd-mod-ubus libiwinfo-lua luci-base luci-app-firewall luci-mod-admin-full luci-theme-bootstrap \
-wpad-mini -wpad-basic wpad-openssl usbutils block-mount e2fsprogs samba4-server luci-app-samba4 \
aria2 luci-app-aria2 ariang stubby curl wget tcpdump kmod-fs-ext4 kmod-usb-storage kmod-usb-storage-uas"

Build

Run the final build configuration

make image PROFILE=netgear_r7800 \
PACKAGES="ca-bundle ca-certificates libustream-openssl -ppp -ppp-mod-pppoe \
uhttpd uhttpd-mod-ubus libiwinfo-lua luci-base luci-app-firewall luci-mod-admin-full luci-theme-bootstrap \
-wpad-mini -wpad-basic wpad-openssl usbutils block-mount e2fsprogs samba4-server luci-app-samba4 \
aria2 luci-app-aria2 ariang stubby curl wget tcpdump kmod-fs-ext4 kmod-usb-storage kmod-usb-storage-uas"

Your own image is located in $PWD/bin/targets/ipq806x/generic

@HackingGate
Copy link
Author

HackingGate commented Jan 31, 2021

Auto KMS

Install luci-compat

opkg update
opkg install luci-compat

Install the packages

Go to luci, activate it.
On your computer that connected your OpenWrt router. Run the command to check if it work.

nslookup -type=srv _vlmcs._tcp.lan
Server:  pi.hole
Address:  192.168.4.45

_vlmcs._tcp.lan SRV service location:
          priority       = 0
          weight         = 100
          port           = 1688
          svr hostname   = HG-X4S.lan
HG-X4S.lan      AAAA IPv6 address = fd7b:1af4:a297::1
HG-X4S.lan      internet address = 192.168.4.1

Key Management Services (KMS) client activation and product keys
https://learn.microsoft.com/en-us/windows-server/get-started/kms-client-activation-keys

@HackingGate
Copy link
Author

HackingGate commented Jan 31, 2021

Statistics

https://openwrt.org/docs/guide-user/luci/luci_app_statistics

opkg install luci-app-statistics
opkg list | grep collectd-mod
opkg install collectd-mod-cpu collectd-mod-interface collectd-mod-memory collectd-mod-ping collectd-mod-rrdtool collectd-mod-wireless

/etc/init.d/luci_statistics enable
/etc/init.d/collectd enable

Edit /etc/config/luci_statistics
Change /tmp/rrd to /mnt/sda1/rrd

cd /mnt/sda1
mkdir rrd
chown -R nobody:nogroup rrd

@HackingGate
Copy link
Author

HackingGate commented Feb 5, 2021

My Samba Storage

  • Everyone can access and edit files in Unlimited disk.
  • Users have a Private and a Public folder in Shared disk.

Result:
When I logged in as hg, I can't access smb_test_user's Private folder. And I can't edit or delete files from its Public folder.
Shared disk with user management

Add user

echo -n 'hg:*:1000:65534:hg:/var:/bin/false' >> /etc/passwd

65534 is the nogroup id where you can see in /etc/group.

The Configuration

Folder structure and permissions:

# ll /mnt/sda1 | awk '{print $1, $3, $4, $9}'
drwxr-xr-x root root ./
drwxr-xr-x root root ../
drwxr-xr-x root root Shared/
drwxr-xr-x root root Unlimited/
drwx------ root root lost+found/

# ll /mnt/sda1/Shared/* | awk '{print $1, $3, $4, $9}'
hg:   
drwxr-xr-x root root ./
drwxr-xr-x root root ../
drwx------ hg root Private/
drwxr-xr-x hg root Public/
   
smb_test_user:   
drwxr-xr-x root root ./
drwxr-xr-x root root ../
drwx------ smb_test root Private/
drwxr-xr-x smb_test root Public/

Configuration file:

# cat /etc/config/samba4 

config samba
	option workgroup 'WORKGROUP'
	option charset 'UTF-8'
	option description 'Samba on OpenWRT'
	option macos '1'

config sambashare
	option read_only 'no'
	option guest_ok 'yes'
	option create_mask '0666'
	option dir_mask '0777'
	option force_root '1'
	option name 'Unlimited'
	option path '/mnt/sda1/Unlimited'
	option inherit_owner 'yes'

config sambashare
	option read_only 'no'
	option create_mask '0666'
	option dir_mask '0777'
	option name 'Shared'
	option path '/mnt/sda1/Shared'
	option users 'smb_test_user,hg'
	option guest_ok 'no'
	option inherit_owner 'yes'

Add a user in samba

smbpasswd -a hg

Reference

[OpenWrt Wiki] SMB / Samba share overview (Windows file sharing)

@HackingGate
Copy link
Author

HackingGate commented Feb 5, 2021

Using Time Machine feature in samba4 is unstable. So I changed to AFP.
AFP Netatalk share configuration (aka Apple Time Machine)

Running both AFP and SAMBA on the same router is no problem.
Your macOS only show AFP disk. If you want access SAMBA you may need enter the address smb:// in your browser manually.

You can use both over VPN.
Don't use HOSTNAME.local you can't find the address over VPN.
You may need enter address smb://HOSTNAME.lan or afp://HOSTNAME.lan.

# grep users /etc/group
users:x:100:hg

@HackingGate
Copy link
Author

HackingGate commented Mar 8, 2021

Keep configurations while sysupgrade

# DNS
/etc/dnsmasq.conf
 
# AFP
/etc/afp.conf
/etc/avahi/
/etc/extmap.conf
/var/netatalk/

# Samba
/etc/samba/secrets.tdb
/etc/samba/smbpasswd

@HackingGate
Copy link
Author

HackingGate commented Apr 3, 2021

Multi WAN

Setup VLAN

Add a new VLAN 3. Assign LAN 1 port to VLAN 3. (On R7800 the port no. is 4)
If you don't what no. is on your router, go to this page:
[OpenWrt Router]/cgi-bin/luci/admin/network/switch

VLAN-R7800-HG

After adding a new VLAN. /etc/config/network will look like this:

config switch_vlan
	option device 'switch0'
	option vlan '1'
	option ports '1 2 3 6t'
	option vid '1'

config switch_vlan
	option device 'switch0'
	option vlan '2'
	option vid '2'
	option ports '0t 5'

config switch_vlan
	option device 'switch0'
	option vlan '3'
	option vid '3'
	option ports '0t 4'

Setup load balancing

Install mwan3

opkg install mwan3 luci-app-mwan3

Edit /etc/config/network

config interface 'wan'
	option ifname 'eth0.2'
	option proto 'dhcp'

config interface 'wan6'
	option ifname 'eth0.2'
	option proto 'dhcpv6'

config interface 'wanb'
	option ifname 'eth0.3'
	option proto 'dhcp'

config interface 'wanb6'
	option ifname 'eth0.3'
	option proto 'dhcpv6'

If you don't know what 'eth0.2' or 'eth0.3' is and don't know what the number means or your router is different from me. Read OpenWrt Switch Documentation.

The final thing is enable MWAN interfaces.
Use LuCI or edit /etc/config/mwan3.

MWAN

@HackingGate
Copy link
Author

HackingGate commented Apr 4, 2021

MWAN3 with domain support

Setup

opkg info mwan3

When you install mwan3, ipset is also installed.

/etc/dnsmasq.conf example:

ipset=/youtube.com/youtube

Follow this article.
OpenWRT conditional hostname routing using MWAN3 and ipset

opkg remove dnsmasq
opkg install dnsmasq-full

Download the script https://gist.github.com/tmkasun/4f9e1fe6ed8254a115d2924f6b3b885d

cd /etc/init.d/
wget https://gist.github.com/tmkasun/4f9e1fe6ed8254a115d2924f6b3b885d/raw/e99d155d627d2056e1aeb143328896f734e14e05/autoipset

Edit

vim autoipset

Enable

chmod +x autoipset
/etc/init.d/autoipset enable
/etc/init.d/autoipset start
/etc/init.d/dnsmasq restart
/etc/init.d/mwan3 restart

My configuration

  • Cygames returns 503 to my IPv4 address and Cygames is not available in IPv6
  • Engadget JP says my IPv6 (JP node / US address) from HE.net is in EU and don't let me access so I have to force it to use IPv4

/etc/init.d/autoipset:

  • cygames (IPv4 only)
  • engadget_jp (IPv6 only)
ipset -N cygames hash:ip
ipset -N engadget_jp hash:ip family inet6

/etc/dnsmasq.conf:

  • cygames.jp and all subdomains
  • japanese.engadget.com
# Unblock Cygames
ipset=/cygames.jp/cygames

# Unblock Engadget JP
ipset=/japanese.engadget.com/engadget_jp

/etc/config/mwan3:

config rule 'cygames'
	option proto 'all'
	option sticky '1'
	option timeout '60'
	option ipset 'cygames'
	option use_policy 'wanb_wan'

config rule 'engadget_jp'
	option proto 'all'
	option sticky '1'
	option timeout '60'
	option ipset 'engadget_jp'
	option use_policy 'wan_wanb'

@HackingGate
Copy link
Author

Monitor multi wan usage

Add 'eth0.2 eth0.3' on LuCI:
monitor_multi_wan

Or edit /etc/config/luci_statistics:

config statistics 'collectd_interface'
        option enable '1'            
        option IgnoreSelected '0'
        option Interfaces 'br-lan eth0.2 eth0.3'

@HackingGate
Copy link
Author

Ad blocking

https://openwrt.org/docs/guide-user/services/ad-blocking

opkg install adblock luci-app-adblock
reboot

@HackingGate
Copy link
Author

HackingGate commented Apr 6, 2021

IPv6 tunnel

Object

  • Obtain IPv6 for IPv4 only network

Requirement

  • IPv4

Background

I'm using a free PPPoE access point on NTT East FLET'S HIKARI provided by SoftEther.
I don't have a useable IPv6 connection.
I don't have a public IPv4 address. My internal IPv4 address and DNS is in 100.64.0.0/10.
Looks like I'm connecting with CGN (Carrier Grade NAT).

my-internal-address

Setup

Get a free IPv6 tunnel on HE.net by clicking Create Regular Tunnel.

If you already have one. It will show on the homepage: tunnelbroker.net.

opkg install 6in4
config interface 'henet'
	option proto '6in4'
	option tunlink   'wan'
	option peeraddr '' # Server IPv4 Address
	option ip6addr '' # Copy Client IPv6 Address
	option tunnelid ''
	option username ''
	list ip6prefix ''
	option password ''  # Update Key in Advanced tab

Dynamic IPv6-in-IPv4 Tunnel (HE.net only) - OpenWrt Document

@HackingGate
Copy link
Author

HackingGate commented Apr 8, 2021

Setup WireGuard server

WireGuard server

Last modified: 2021/04/04 14:23 by vgaetera

The document is missing LuCI app, client psk, key and pub. The fixed command here:

  1. Preparation
# Install packages
opkg update
opkg install luci-proto-wireguard

# Configuration parameters
WG_IF="vpn"
WG_PORT="51820"
WG_ADDR="192.168.9.1/24"
WG_ADDR6="fdf1:e8a1:8d3f:9::1/64"
  1. Key management
# Generate keys
umask go=
wg genkey | tee wgserver.key | wg pubkey > wgserver.pub
wg genpsk > wgclient.psk
wg genkey | tee wgclient.key | wg pubkey > wgclient.pub

# Server private key
WG_KEY="$(cat wgserver.key)"

# Pre-shared key
WG_PSK="$(cat wgclient.psk)"

# Client public key
WG_PUB="$(cat wgclient.pub)"

Follow the rest of the document.

Setup WireGuard client

This will allow you access home resources from anywhere in the world.

I don't have public IPv4 address. I have public IPv6 addresses from HE.net. So my Endpoint is IPv6 only.

Replace wgclient.key, wgserver.pub, wgclient.psk, OpenWrt_LAN_Interface_Private_IPv6_Subnet, OpenWrt_Public_IPv6_Address with actual value.
DNS is optional.

[Interface]
PrivateKey = wgclient.key
Address = 192.168.9.2/32, fdf1:e8a1:8d3f:9::2/128
DNS = 192.168.9.1, fdf1:e8a1:8d3f:9::1

[Peer]
PublicKey = wgserver.pub
PresharedKey = wgclient.psk
AllowedIPs = 192.168.0.0/16, fdf1:e8a1:8d3f:9::/64, OpenWrt_LAN_Interface_Private_IPv6_Subnet
Endpoint = [OpenWrt_Public_IPv6_Address]:51820

Restart WireGuard server

/etc/init.d/network restart

Route all connections to VPN

(client side settings only)

You can change AllowedIPs to 0.0.0.0/0, ::/0. It will route all IP connection (OSI layer 3) (except some private addresses like default gateway) to WireGuard VPN.

To show routing table on macOS:

netstat -rn

192.168.1.1 is the default gateway and it goes through en0 which is the default Wi-Fi interface on macOS.

http://192.168.1.1 will be my friend's home router's authentication page.

Route 192.168.1.1 to WireGuard VPN. (utun2 is my WireGuard's interface, run ifconfig to see yours.)

sudo route change 192.168.1.1 -interface utun2

http://192.168.1.1 will be my router so I can maintenance my home network remotely.

And Internet will down.
To reset it turn off/on Wi-Fi and re-enable WireGuard.

@HackingGate
Copy link
Author

R7800 Debricking

[OpenWrt Wiki] Netgear R7800 (Nighthawk X4S AC2600) Debricking

On macOS the tftp command is a little different.

References

# Enable TFTP server
sudo launchctl unload -w /System/Library/LaunchDaemons/tftp.plist
# Check if TFTP server running
sudo lsof -i:69 

More about launchctl: https://apple.stackexchange.com/a/308421/105981

Commands

$ tftp
tftp> connect 192.168.1.1
tftp> mode binary
tftp> put openwrt-21.02.0-rc3-ipq806x-generic-netgear_r7800-squashfs-factory.img

@HackingGate
Copy link
Author

DoH with Dnsmasq and https-dns-proxy

https://openwrt.org/docs/guide-user/services/dns/doh_dnsmasq_https-dns-proxy

opkg install https-dns-proxy luci-app-https-dns-proxy

@HackingGate
Copy link
Author

HackingGate commented Jul 7, 2021

PS4 Remote Play

Common Ways To Remote Play While Away Home

  1. The official PS Remote Play app away home play feature
    I'm currently using v6プラス(based on MAP-E) option from my ISP. I have public IPv4/v6 addresses but I have only SOME IPv4 ports available. I failed to connect my PS4.

  2. The official PS Remote Play app in-home play feature with a home VPN server
    This method works on OSI-layer 2 VPN but not on layer 3.
    WireGuard is layer 3. And I have no plan to start a OpenVPN TAP mode (layer 2) VPN.

The solution (the third way to remote play)

Prepare a layer 3 home VPN server.

Use Chiaki instead of official PS Remote Play. (I learned here)

Seems Chiaki don't wake PS4 on LAN. So I installed ps4-waker on my home Raspberry Pi.

Just follow the link and setup it.

The result

  1. Set PS4 to Rest Mode before leave home. (Don't Power Off)
  2. SSH into home Raspberry Pi.
  3. Run ps4-waker command will wake up PS4.
  4. Connect to home VPN (layer 3).
  5. Open Chiaki any enjoy it.

@HackingGate
Copy link
Author

HackingGate commented Aug 4, 2021

Block Country IPs

Tutorial for how to boycott CN IPv4 on OpenWrt.
Script from here https://github.com/kravietz/blacklist-scripts
CIDR IP list from my project https://country-ip-blocks.hackinggate.com

OpenWrt Setup

Install

opkg install ipset curl
wget https://raw.githubusercontent.com/kravietz/blacklist-scripts/master/blacklist.sh
mv blacklist.sh /etc/firewall.user

Create /etc/ip-blacklist.conf

URLS="https://country-ip-blocks.hackinggate.com/CN_IPv4.txt"

Edit /etc/firewall.user

I don't have pppoe-wan and the blocklist don't work.
I replaced IN_OPT="-i $wan_iface" with IN_OPT="" and it works now. (kravietz/blacklist-scripts#6)

Activate

# Manual run
sh /etc/firewall.user
# Daily update
echo "01 01 * * * sh /etc/firewall.user" >>/etc/crontabs/root

Check & Test

ipset list -name

Two new sets are added

manual-blacklist
country-ip-blocks.hac

View blocked CN IPv4 entries

ipset list country-ip-blocks.hac

Here's how to use manual-blacklist.

ipset add manual-blacklist 8.8.8.8
ipset list manual-blacklist
ping 8.8.8.8
ipset del manual-blacklist 8.8.8.8
ping 8.8.8.8

Block Multi Lists

Example of /etc/ip-blacklist.conf

# Emerging Threats lists offensive IPs such as botnet command servers
URLS="https://rules.emergingthreats.net/fwrules/emerging-Block-IPs.txt"

# Blocklist.de collects reports from fail2ban probes, listing password brute-forces, scanners and other offenders
URLS="$URLS https://www.blocklist.de/downloads/export-ips_all.txt"

URLS="$URLS https://country-ip-blocks.hackinggate.com/CN_IPv4.txt"
URLS="$URLS https://country-ip-blocks.hackinggate.com/HK_IPv4.txt"
URLS="$URLS https://country-ip-blocks.hackinggate.com/MO_IPv4.txt"

All set will name country-ip-blocks.hac and override.

To fix it. Edit /etc/firewall.user. Insert script between the two lines. L116

# download the blocklist                                                                                            
set_name=$(echo "$url" | awk -F/ '{print substr($3,0,21);}') # set name is derived from source URL hostname         
curl -L -v -s ${COMPRESS_OPT} -k "$url" >"${unsorted_blocklist}" 2>"${headers}"     

Will be

# download the blocklist                                                                                            
set_name=$(echo "$url" | awk -F/ '{print substr($3,0,21);}') # set name is derived from source URL hostname         
# autodetect country-ip-blocks.hackinggate.com                                                                      
if echo "${url}" | grep -q 'country-ip-blocks.hackinggate.com'; then                                                
    set_name=$(echo "$url" | awk -F/ '{print substr($4,0,21);}')                                                    
fi                                                                                                                  
curl -L -v -s ${COMPRESS_OPT} -k "$url" >"${unsorted_blocklist}" 2>"${headers}"     

sh /etc/firewall.user and ipset list -name will be

manual-blacklist
rules.emergingthreats
www.blocklist.de
CN_IPv4.txt
HK_IPv4.txt
MO_IPv4.txt

Check if there's entries

ipset list CN_IPv4.txt | wc -l

@HackingGate
Copy link
Author

HackingGate commented Oct 3, 2021

netboot.xyz

https://netboot.xyz

cd /root
mkdir tftp
cd tftp
wget https://boot.netboot.xyz/ipxe/netboot.xyz.efi

Edit /etc/config/dhcp

config dnsmasq
        ...
        option enable_tftp '1'
        option dhcp_boot 'netboot.xyz.efi'
        option tftp_root '/root/tftp'
config dhcp 'lan'
	...
	list dhcp_option '66,0.0.0.0'

/etc/init.d/dnsmasq restart

@HackingGate
Copy link
Author

Upgrade OpenWrt

auc

@HackingGate
Copy link
Author

HackingGate commented Sep 9, 2022

Advertise DNS server

/etc/config/dhcp

config dhcp 'lan'
	...
	list dhcp_option '6,192.168.4.45'

@HackingGate
Copy link
Author

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment