Skip to content

Instantly share code, notes, and snippets.

@HandyMenny

HandyMenny/dmesg

Created November 6, 2014 18:57
Show Gist options
  • Save HandyMenny/03613b10e7d3b1adc385 to your computer and use it in GitHub Desktop.
Save HandyMenny/03613b10e7d3b1adc385 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
dmesg
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.0.31-androidarmv6 (handymenny@handyarch) (gcc version 4.7 (GCC) ) #20 PREEMPT Thu Nov 6 19:45:32 CET 2014
<4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387d
<4>[ 0.000000] CPU: VIPT aliasing data cache, unknown instruction cache
<4>[ 0.000000] Machine: GT-S5830 Board
<6>[ 0.000000] Partition (from atag) mibib -- Offset:0 Size:6
<6>[ 0.000000] Partition (from atag) qcsbl -- Offset:6 Size:2
<6>[ 0.000000] Partition (from atag) oemsbl -- Offset:8 Size:3
<6>[ 0.000000] Partition (from atag) amss -- Offset:b Size:64
<6>[ 0.000000] Partition (from atag) efs2 -- Offset:6f Size:24
<6>[ 0.000000] Partition (from atag) nv_backup -- Offset:93 Size:14
<6>[ 0.000000] Partition (from atag) arm11boot -- Offset:a7 Size:8
<6>[ 0.000000] Partition (from atag) boot -- Offset:af Size:20
<6>[ 0.000000] Partition (from atag) recovery -- Offset:cf Size:20
<6>[ 0.000000] Partition (from atag) parameter -- Offset:ef Size:3
<6>[ 0.000000] Partition (from atag) fota -- Offset:f2 Size:18
<6>[ 0.000000] Partition (from atag) system -- Offset:10a Size:365
<6>[ 0.000000] Partition (from atag) userdata -- Offset:46f Size:2f1
<6>[ 0.000000] Partition (from atag) cache -- Offset:760 Size:74
<4>[ 0.000000] Cooper H/W revision : 0x05
<4>[ 0.000000] Sexykyu Salescode : SWC
<6>[ 0.000000] memory pool 3 (start 25a00000 size 2600000) initialized
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<3>[ 0.000000] smem_find(137, 72): wrong size 56
<3>[ 0.000000] smem_find(137, 64): wrong size 56
<3>[ 0.000000] smem_find(137, 64): wrong size 56
<6>[ 0.000000] socinfo_init: v2, id=67, ver=1.3, raw_id=961, raw_ver=3
<1>[ 0.000000] Initialized strongly ordered page successfully
<6>[ 0.000000] L210 cache controller enabled
<6>[ 0.000000] L210 cache controller enabled
<6>[ 0.000000] l2x0: 4 ways, CACHE_ID 0x4100544f, AUX_CTRL 0x0006801b, Cache size: 262144 B
<7>[ 0.000000] On node 0 totalpages: 74752
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0811590, node_mem_map c0a18000
<7>[ 0.000000] Normal zone: 660 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 74092 pages, LIFO batch:15
<6>[ 0.000000] allocating 1900544 bytes at c0cae000 (142ae000 physical) for fb
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 74092
<5>[ 0.000000] Kernel command line: mem=330M console=NULL hw=5 fbaddr=0xf6000 salescode=SWC
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 292MB = 292MB total
<5>[ 0.000000] Memory: 280204k/280204k available, 57716k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
<5>[ 0.000000] vmalloc : 0xd5000000 - 0xfa000000 ( 592 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xd4a00000 ( 330 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc0036000 ( 184 kB)
<5>[ 0.000000] .text : 0xc0036000 - 0xc079bf2c (7576 kB)
<5>[ 0.000000] .data : 0xc079c000 - 0xc0824940 ( 547 kB)
<5>[ 0.000000] .bss : 0xc0824964 - 0xc0a13818 (1980 kB)
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:261
<6>[ 0.000000] sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms
<6>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000439] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
<6>[ 0.080189] pid_max: default: 32768 minimum: 301
<6>[ 0.080503] Security Framework initialized
<6>[ 0.080604] SELinux: Initializing.
<7>[ 0.080708] SELinux: Starting in permissive mode
<6>[ 0.080886] Mount-cache hash table entries: 512
<6>[ 0.081673] Initializing cgroup subsys cpuacct
<6>[ 0.081734] Initializing cgroup subsys freezer
<6>[ 0.081796] CPU: Testing write buffer coherency: ok
<6>[ 0.082261] hw perfevents: enabled with v6 PMU driver, 3 counters available
<6>[ 0.085266] print_constraints: dummy:
<3>[ 0.085356] rdev_init_debugfs: Error-Bad Function Input
<6>[ 0.085673] NET: Registered protocol family 16
<7>[ 0.087549] i2c-core: driver [dummy] registered
<6>[ 0.087899] print_constraints: smps0: 750 <--> 3050 mV normal
<6>[ 0.088208] print_constraints: smps1: 750 <--> 3050 mV normal
<6>[ 0.088464] print_constraints: smps2: 750 <--> 3050 mV normal
<6>[ 0.088751] print_constraints: smps3: 750 <--> 3050 mV normal
<6>[ 0.089028] print_constraints: ldo00: 2850 mV normal
<6>[ 0.089298] print_constraints: ldo01: 2600 mV normal
<6>[ 0.089538] print_constraints: ldo02: 2600 mV normal
<6>[ 0.089821] print_constraints: ldo03: 2850 mV normal
<6>[ 0.090106] print_constraints: ldo04: 2850 mV normal
<6>[ 0.090454] print_constraints: ldo05: 2850 mV normal
<6>[ 0.090754] print_constraints: ldo06: 3300 mV normal
<6>[ 0.091033] print_constraints: ldo07: 2700 mV normal
<6>[ 0.091318] print_constraints: ldo08: 2700 mV normal
<6>[ 0.091571] print_constraints: ldo09: 2900 mV normal
<6>[ 0.091888] print_constraints: ldo10: 2600 mV normal
<6>[ 0.092148] print_constraints: ldo11: 1800 mV normal
<6>[ 0.092464] print_constraints: ldo12: 1800 mV normal
<6>[ 0.092729] print_constraints: ldo13: 1800 <--> 2850 mV normal
<6>[ 0.093026] print_constraints: ldo14: 2700 mV normal
<6>[ 0.093289] print_constraints: ldo15: 2600 mV normal
<6>[ 0.093604] print_constraints: ldo16: 2850 <--> 3000 mV normal
<6>[ 0.093909] print_constraints: ldo17: 1300 mV normal
<6>[ 0.094201] print_constraints: maxldo03: 3000 mV normal
<6>[ 0.094499] print_constraints: maxldo04: 2800 <--> 3000 mV normal
<6>[ 0.094801] print_constraints: maxldo05: 1800 <--> 3000 mV normal
<6>[ 0.095124] print_constraints: maxldo06: 2600 <--> 3000 mV normal
<6>[ 0.095401] print_constraints: maxldo08: 2600 <--> 2800 mV normal
<6>[ 0.095709] print_constraints: maxldo09: 2800 mV normal
<6>[ 0.096003] print_constraints: maxldo10: 1200 <--> 2800 mV normal
<6>[ 0.096341] print_constraints: maxldo12: 2600 mV normal
<6>[ 0.096636] print_constraints: maxldo13: 3300 mV normal
<6>[ 0.096946] print_constraints: maxldo14: 2600 mV normal
<6>[ 0.097236] print_constraints: maxldo15: 1800 <--> 2850 mV normal
<6>[ 0.097588] print_constraints: maxldo16: 2850 <--> 3000 mV normal
<6>[ 0.097931] print_constraints: maxldo17: 3000 mV normal
<6>[ 0.098224] print_constraints: maxldo18: 3300 mV normal
<6>[ 0.098549] print_constraints: maxldo19: 2600 <--> 3300 mV normal
<6>[ 0.098746] acpuclk_7627_init()
<6>[ 0.098779] Shared PLL control available.
<6>[ 0.098954] L val: PLL0: 50, PLL1: 12, PLL2: 41
<6>[ 0.100196] ACPU running at 400000 KHz
<6>[ 0.100288] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4
<6>[ 0.100341] 0 19200 -1 1 19200 1 30720 -1 -1 -1 -1 5 4 6 -1
<6>[ 0.100389] 1 120000 0 8 60000 2 61440 -1 -1 -1 -1 7 4 6 -1
<6>[ 0.100438] 2 122880 1 2 61440 2 61440 1 -1 -1 -1 7 4 6 -1
<6>[ 0.100486] 3 200000 2 4 66667 3 61440 1 2 -1 -1 7 4 6 -1
<6>[ 0.100536] 4 245760 1 1 122880 2 61440 1 2 3 -1 7 -1 6 -1
<6>[ 0.100584] 5 320000 0 3 160000 2 160000 1 2 3 -1 7 -1 6 -1
<6>[ 0.100634] 6 400000 2 2 133333 3 160000 1 2 3 -1 7 -1 8 -1
<6>[ 0.100683] 7 480000 0 2 160000 3 160000 1 2 3 -1 -1 -1 8 -1
<6>[ 0.100731] 8 800000 2 1 200000 4 200000 7 -1 6 -1 -1 -1 -1 -1
<6>[ 0.100759] 5 scaling frequencies supported.
<6>[ 0.103973] msm7x2x_init : msm7x2x_init #####
<3>[ 0.104893] Error configuraing GPIO_WLAN_HOST_WAKE
<6>[ 0.108723] print_constraints: fs_gfx3d: normal
<6>[ 0.130433] bio: create slab <bio-0> at 0
<5>[ 0.132008] SCSI subsystem initialized
<6>[ 0.132336] usbcore: registered new interface driver usbfs
<6>[ 0.132571] usbcore: registered new interface driver hub
<6>[ 0.132824] usbcore: registered new device driver usb
<7>[ 0.133269] i2c i2c-2: adapter [i2c-gpio2] registered
<7>[ 0.133428] i2c 2-0020: uevent
<7>[ 0.133476] i2c i2c-2: client [synaptics-rmi-ts] registered with bus id 2-0020
<6>[ 0.133519] i2c-gpio i2c-gpio.2: using pins 23 (SDA) and 30 (SCL)
<7>[ 0.133708] i2c i2c-3: adapter [i2c-gpio3] registered
<7>[ 0.133848] i2c 3-0025: uevent
<7>[ 0.133889] i2c i2c-3: client [fsa9280] registered with bus id 3-0025
<6>[ 0.133924] i2c-gpio i2c-gpio.3: using pins 91 (SDA) and 90 (SCL)
<7>[ 0.134106] i2c i2c-5: adapter [i2c-gpio5] registered
<7>[ 0.134251] i2c 5-0008: uevent
<7>[ 0.134293] i2c i2c-5: client [bma_accel] registered with bus id 5-0008
<7>[ 0.134419] i2c 5-0039: uevent
<7>[ 0.134463] i2c i2c-5: client [taos] registered with bus id 5-0039
<6>[ 0.134496] i2c-gpio i2c-gpio.5: using pins 37 (SDA) and 36 (SCL)
<6>[ 0.134686] msm_i2c_probe
<6>[ 0.134831] msm_i2c_probe: clk_ctl 316, 384000 Hz
<7>[ 0.135006] i2c i2c-0: adapter [MSM I2C adapter-PRI] registered
<7>[ 0.135163] i2c i2c-1: adapter [MSM I2C adapter-AUX] registered
<6>[ 0.135929] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.136973] Bluetooth: Core ver 2.16
<6>[ 0.137103] NET: Registered protocol family 31
<6>[ 0.137124] Bluetooth: HCI device and connection manager initialized
<6>[ 0.137153] Bluetooth: HCI socket layer initialized
<6>[ 0.137174] Bluetooth: L2CAP socket layer initialized
<6>[ 0.137559] Bluetooth: SCO socket layer initialized
<6>[ 0.137868] Switching to clocksource dg_timer
<6>[ 0.150373] NET: Registered protocol family 2
<6>[ 0.150706] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.151586] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.152284] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.152768] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.152794] TCP reno registered
<6>[ 0.152823] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.152874] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.153513] NET: Registered protocol family 1
<6>[ 0.154293] RPC: Registered named UNIX socket transport module.
<6>[ 0.154319] RPC: Registered udp transport module.
<6>[ 0.154341] RPC: Registered tcp transport module.
<6>[ 0.154363] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.154858] Trying to unpack rootfs image as initramfs...
<6>[ 0.897704] Freeing initrd memory: 3524K
<3>[ 0.901728] Notify: smsm init
<6>[ 0.911339] rpcrouter_smd_remote_notify: smd opened 0x (null)
<6>[ 0.932189] [adsp.c:adsp_init] rs3000000a -- 0
<6>[ 0.933791] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.933821] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[ 0.933848] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.933873] [audpp.c:audpp_probe] queueid:13
<6>[ 0.933894] [audpp.c:audpp_probe] decid:0
<6>[ 0.933916] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.933939] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.933963] [audpp.c:audpp_probe] queueid:14
<6>[ 0.933984] [audpp.c:audpp_probe] decid:1
<6>[ 0.934004] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.934028] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.934053] [audpp.c:audpp_probe] queueid:15
<6>[ 0.934073] [audpp.c:audpp_probe] decid:2
<6>[ 0.934094] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.934118] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.934141] [audpp.c:audpp_probe] queueid:16
<6>[ 0.934163] [audpp.c:audpp_probe] decid:3
<6>[ 0.934184] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.934208] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.934231] [audpp.c:audpp_probe] queueid:17
<6>[ 0.934253] [audpp.c:audpp_probe] decid:4
<6>[ 0.934274] [audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.937434] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 0.937448] tick = 105915
<6>[ 0.937458] stamp = 0
<3>[ 0.937491] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 0.938131] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 0.938144] tick = 256570
<6>[ 0.938153] stamp = 57620117306998784
<3>[ 0.938203] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<4>[ 0.939911] [VIB] platform driver register result : 0
<6>[ 0.940443] audit: initializing netlink socket (disabled)
<5>[ 0.940548] type=2000 audit(0.940:1): initialized
<6>[ 0.957806] ashmem: initialized
<6>[ 0.960804] fuse init (API version 7.16)
<6>[ 0.961338] msgmni has been set to 554
<7>[ 0.961393] SELinux: Registering netfilter hooks
<6>[ 0.964161] io scheduler noop registered
<6>[ 0.964361] io scheduler cfq registered (default)
<3>[ 0.964529] fbaddr cmdline is null
<3>[ 0.965134] msm_ion_client_create() return error, val ffffffed
<4>[ 0.967423] ++++++lcdc_s6d16a0x_panel_init
<4>[ 0.967516] ++++++pdev->id=0
<4>[ 0.998173] s6d16a0x_COOPER start lcdc_s6d16a0x_panel_on
<4>[ 0.998398] s6d16a0x_COOPER start s6d16a0x_disp_powerup
<4>[ 1.079813] s6d16a0x_COOPER start determine_lcd_type
<4>[ 1.080218] @@@@@ determine_lcd_type : read by SDI == AUO or SONY
<4>[ 1.080241] ldi mtpdata: 6b 4c 10
<4>[ 1.080256] lcd type is AUO
<4>[ 1.080269] s6d16a0x_COOPER start s6d16a0x_disp_on
<4>[ 1.080289] Cooper HW rev is 5, apply 5's init sequence
<4>[ 1.209956] [HSIL] mdp_lcdc_on(317) mdp_lcdc_on end
<6>[ 1.240354] Console: switching to colour frame buffer device 40x30
<6>[ 1.251189] FrameBuffer[0] 320x480 size=1228800 bytes is registered successfully!
<7>[ 1.251798] Registered led device: lcd-backlight
<4>[ 1.251869] --lcdc_s6d16a0x_panel_init
<6>[ 1.252933] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 1.268216] msm_serial_hs.1: ttyHS1 at MMIO 0xa0300000 (irq = 52) is a MSM HS UART
<6>[ 1.288099] msm_serial_hs module loaded
<6>[ 1.290929] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 1.298776] brd: module loaded
<6>[ 1.303753] loop: module loaded
<6>[ 1.304021] pmem: Initializing pmem (user-space) as cached
<6>[ 1.304383] allocating 28794880 bytes at (null) (25a00000 physical) for pmem
<6>[ 1.304533] pmem: Initializing pmem_adsp (user-space) as non-cached
<6>[ 1.304806] allocating 10346496 bytes at (null) (27576000 physical) for pmem_adsp
<6>[ 1.304951] pmem: Initializing pmem_audio (user-space) as non-cached
<6>[ 1.305194] allocating 372736 bytes at (null) (27f54000 physical) for pmem_audio
<6>[ 1.306624] SCSI Media Changer driver v0.25
<6>[ 1.306838] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[ 1.306871] CSLIP: code copyright 1989 Regents of the University of California.
<6>[ 1.307881] rmnet_init: SMD devices[8]
<3>[ 1.316059] msm_hsusb_vbus_shutdown: vbus_shutdown rpc failed before call,rc = 0
<3>[ 1.317559] msm_otg_probe: chg_init failed
<6>[ 1.318033] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.318319] host driver registered w/ tranceiver
<6>[ 1.318628] usbcore: registered new interface driver cdc_acm
<6>[ 1.318651] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 1.318679] Initializing USB Mass Storage driver...
<6>[ 1.318823] usbcore: registered new interface driver usb-storage
<6>[ 1.318846] USB Mass Storage support registered.
<6>[ 1.318961] usbcore: registered new interface driver usb_ehset_test
<6>[ 1.319546] peripheral driver registered w/ tranceiver
<6>[ 1.323776] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.323813] android_usb gadget: Number of LUNs=1
<6>[ 1.323841] lun0: LUN: removable file: (no medium)
<6>[ 1.324399] android_usb gadget: android_usb ready
<6>[ 1.326816] diagchar initialized now[TSP] synaptics_ts_init
<7>[ 1.327174] synaptics-rmi-ts 2-0020: probe
<4>[ 1.327203] [TSP] synaptics_ts_probe, 573
<6>[ 1.778236] android_work: did not send uevent (0 0 (null))
<6>[ 2.027944] synaptics_ts_probe: max_x: 320, max_y: 480
<6>[ 2.028438] input: sec_touchscreen as /devices/virtual/input/input0
<4>[ 2.028714] [TSP] synaptics_ts_probe, irq=83
<6>[ 2.028831] synaptics_ts_probe: Start touchscreen sec_touchscreen in interrupt mode
<7>[ 2.029073] i2c i2c-2: master_xfer[0] W, addr=0x20, len=1
<4>[ 2.029916] [TSP] Error code : 479
<4>[ 2.029941] [TSP] synaptics_ts_probe: 682, buf[1]=0, buf[2]=0
<7>[ 2.138139] i2c i2c-2: master_xfer[0] W, addr=0x20, len=1
<4>[ 2.138963] [TSP] Error code : 479
<7>[ 2.247949] i2c i2c-2: master_xfer[0] W, addr=0x20, len=1
<4>[ 2.248771] [TSP] Error code : 479
<4>[ 2.248789] [TSP] emergency firmware UPDATE
<6>[ 2.248809] [TSP] firm_update, 1164
<4>[ 2.248828] [TSP] disable_irq : 1166
<6>[ 2.248861] [TSP] cypress_update, 197, HW ver=0
<6>[ 25.477946] [TSP] firm_update success, 1190
<4>[ 25.477969] [TSP] enable_irq : 1196
<3>[ 25.477994] i2c_transfer failed
<7>[ 25.478029] i2c i2c-2: master_xfer[0] W, addr=0x20, len=1
<4>[ 25.478851] [TSP] Error code : 479
<4>[ 25.478876] [TSP] synaptics_ts_probe, ln:712, Failed to register TSP!!!
<4>[ 25.478893] check the i2c line!!!, ret=-6
<7>[ 25.479089] i2c-core: driver [synaptics-rmi-ts] registered
<4>[ 25.479321] [gpio_event_matrix_func:628] hw rev = 5
<6>[ 25.479646] GPIO Matrix Keypad Driver: Start keypad matrix for sec_key in interrupt mode
<6>[ 25.480199] input: sec_key as /devices/virtual/input/input1
<7>[ 25.481501] RTC Registering with rs30000048
<3>[ 25.482678] msm_rpc_client_req: RPC call was not successful (3)
<7>[ 25.482713] msmrtc_setup_cb: RPC client registration for PROC:12 failed
<7>[ 25.482746] rs30000048 rs30000048.65536: msmrtc_probe: Could not initialize RPC callback
<7>[ 25.483306] msmrtc_tod_proc_result: 11/03/2014 02:23:40 (00)
<6>[ 25.484103] using rtc device, msm_rtc, for alarms
<7>[ 25.484134] msm_rtc: dev (254:0)
<6>[ 25.484196] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
<7>[ 25.484956] msmrtc_tod_proc_result: 01/01/2007 05:40:27 (00)
<7>[ 25.485316] msm_rtc_secure: dev (254:1)
<6>[ 25.485344] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
<6>[ 25.485474] i2c /dev entries driver
<7>[ 25.485811] i2c-dev: adapter [i2c-gpio2] registered as minor 2
<7>[ 25.486076] i2c-dev: adapter [i2c-gpio3] registered as minor 3
<7>[ 25.486306] i2c-dev: adapter [i2c-gpio5] registered as minor 5
<7>[ 25.486524] i2c-dev: adapter [MSM I2C adapter-PRI] registered as minor 0
<7>[ 25.486746] i2c-dev: adapter [MSM I2C adapter-AUX] registered as minor 1
<7>[ 25.486834] fsa9280 3-0025: probe
<6>[ 25.486853] [FSA9280]: probe
<6>[ 25.486868] [FSA9280]: init
<7>[ 25.486898] i2c i2c-3: master_xfer[0] W, addr=0x25, len=2
<7>[ 25.487456] i2c i2c-3: master_xfer[0] W, addr=0x25, len=1
<7>[ 25.487488] i2c i2c-3: master_xfer[1] R, addr=0x25, len=1
<4>[ 25.488279] [FSA9280]: Initial control reg 0x02 : 0x1e
<6>[ 25.507948] [FSA9280]: fsa9280 sensor init sequence done
<6>[ 25.508063] [FSA9280]: probe complete
<7>[ 25.508169] i2c-core: driver [fsa9280] registered
<7>[ 25.508589] bma_accel 5-0008: probe
<4>[ 25.508614] [bma_probe] slave addr = 8
<7>[ 25.508649] i2c i2c-5: master_xfer[0] W, addr=0x08, len=1
<7>[ 25.508679] i2c i2c-5: master_xfer[1] R, addr=0x08, len=2
<7>[ 25.509558] i2c i2c-5: master_xfer[0] W, addr=0x08, len=1
<7>[ 25.509588] i2c i2c-5: master_xfer[1] R, addr=0x08, len=2
<6>[ 25.510443] Bosch Sensortec Device detected!
<6>[ 25.510456] BMA220 registered I2C driver!
<6>[ 25.510723] bma accel device create ok
<4>[ 25.510964] registering lightsensor-level input device
<6>[ 25.511381] input: accelerometer_sensor as /devices/virtual/input/input2
<7>[ 25.511671] i2c i2c-5: master_xfer[0] W, addr=0x08, len=1
<7>[ 25.511704] i2c i2c-5: master_xfer[1] R, addr=0x08, len=1
<7>[ 25.512116] i2c i2c-5: master_xfer[0] W, addr=0x08, len=1
<7>[ 25.512148] i2c i2c-5: master_xfer[1] R, addr=0x08, len=1
<7>[ 25.512548] i2c i2c-5: master_xfer[0] W, addr=0x08, len=1
<7>[ 25.512578] i2c i2c-5: master_xfer[1] R, addr=0x08, len=1
<7>[ 25.512978] i2c i2c-5: master_xfer[0] W, addr=0x08, len=2
<7>[ 25.513288] i2c i2c-5: master_xfer[0] W, addr=0x08, len=1
<7>[ 25.513319] i2c i2c-5: master_xfer[1] R, addr=0x08, len=1
<7>[ 25.513714] i2c i2c-5: master_xfer[0] W, addr=0x08, len=2
<7>[ 25.514096] i2c-core: driver [bma_accel] registered
<6>[ 25.514126] taos_opt_init
<7>[ 25.514198] taos 5-0039: probe
<3>[ 25.514243] regulator_enable: maxldo04: invalid input - constraint: [2800000, 3000000], set point: [0, 0]
<6>[ 25.514279] [taos_opt_probe] slave addr = 39
<7>[ 25.526321] i2c i2c-5: master_xfer[0] W, addr=0x39, len=2
<7>[ 25.526636] i2c i2c-5: master_xfer[0] W, addr=0x39, len=2
<7>[ 25.526939] i2c i2c-5: master_xfer[0] W, addr=0x39, len=2
<7>[ 25.527241] i2c i2c-5: master_xfer[0] W, addr=0x39, len=2
<7>[ 25.527539] i2c i2c-5: master_xfer[0] W, addr=0x39, len=2
<7>[ 25.527844] i2c i2c-5: master_xfer[0] W, addr=0x39, len=2
<7>[ 25.528181] i2c i2c-5: master_xfer[0] W, addr=0x39, len=2
<7>[ 25.540463] i2c i2c-5: master_xfer[0] R, addr=0x39, len=1
<6>[ 25.540664] TAOS Device detected!
<6>[ 25.540823] Workqueue Settings complete
<6>[ 25.543441] [TAOS] register irq = 91
<6>[ 25.543466] [TAOS] register wakeup source = 0
<6>[ 25.543484] INT Settings complete
<6>[ 25.543501] taos_off(2)
<7>[ 25.543529] i2c i2c-5: master_xfer[0] W, addr=0x39, len=2
<6>[ 25.543838] taos_off voltage down(2)
<6>[ 25.543856] [TAOS] unregister irq = 91
<6>[ 25.543876] [TAOS] register wakeup source = 0
<4>[ 25.543898] taos_off(500): taos power off
<6>[ 25.543914] disable irq for proximity
<6>[ 25.543933] taos_opt_probe is OK!!
<4>[ 25.544029] i2c-core: driver [taos] using legacy suspend method
<4>[ 25.544054] i2c-core: driver [taos] using legacy resume method
<7>[ 25.544076] i2c-core: driver [taos] registered
<6>[ 25.544263] lirc_dev: IR Remote Control driver registered, major 246
<6>[ 25.544289] IR NEC protocol handler initialized
<6>[ 25.544309] IR RC5(x) protocol handler initialized
<6>[ 25.544331] IR RC6 protocol handler initialized
<6>[ 25.544351] IR JVC protocol handler initialized
<6>[ 25.544369] IR Sony protocol handler initialized
<6>[ 25.544391] IR RC5 (streamzap) protocol handler initialized
<6>[ 25.544413] IR LIRC bridge handler initialized
<4>[ 25.544433] [Battery] msm_batt_init
<3>[ 25.544794] [Battery] msm_batt_probe
<6>[ 25.546826] batt_clnt_handle = 0
<6>[ 25.547423] msm_batt_enable_filter: vbatt Filter enabled successfully.
<7>[ 25.547876] i2c i2c-3: master_xfer[0] W, addr=0x25, len=1
<7>[ 25.547968] i2c i2c-3: master_xfer[1] R, addr=0x25, len=1
<7>[ 25.558679] i2c i2c-3: master_xfer[0] W, addr=0x25, len=1
<7>[ 25.558711] i2c i2c-3: master_xfer[1] R, addr=0x25, len=1
<7>[ 25.569403] i2c i2c-3: master_xfer[0] W, addr=0x25, len=1
<7>[ 25.569434] i2c i2c-3: master_xfer[1] R, addr=0x25, len=1
<7>[ 25.580121] i2c i2c-3: master_xfer[0] W, addr=0x25, len=1
<7>[ 25.580153] i2c i2c-3: master_xfer[1] R, addr=0x25, len=1
<3>[ 25.580856] [Battery] get_charger_type charger_type is (2)
<4>[ 25.580883] [Battery] get_charger_type : wake_lock!!! !!!!
<4>[ 25.580936] [Battery] Check VF value [0x0] (when first charger connected!)
<4>[ 25.582066] [Battery] get_charging_status : event_flag =8
<4>[ 25.582304] [Battery] Currnet Charging state [5], Batt temp [300], Batt Level [3702], Percent [100]
<4>[ 25.582341] [Battery] Charging state is changed [ff]=>[5] Batt Level [3702] Percent [100]
<6>[ 25.585644] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[ 25.586276] Bluetooth: MSM Sleep Mode Driver Ver 1.1
<6>[ 25.588434] mmc0: mci-version: 0
<3>[ 25.588609] mmc0: No card detect facilities available
<6>[ 25.590258] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 24,0 dma 8 dmacrcri 6
<6>[ 25.590288] mmc0: 8 bit data mode disabled
<6>[ 25.590309] mmc0: 4 bit data mode enabled
<6>[ 25.590329] mmc0: polling status mode disabled
<6>[ 25.590356] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[ 25.590381] mmc0: Slot eject status = 0
<6>[ 25.590401] mmc0: Power save feature enable = 1
<6>[ 25.590428] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x24ac0000
<6>[ 25.590459] mmc0: DM cmd busaddr 0x24ac0000, cmdptr busaddr 0x24ad7f40
<6>[ 25.591756] mmc1: mci-version: 0
<6>[ 25.592691] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 26,0 dma 8 dmacrcri 7
<6>[ 25.592723] mmc1: 8 bit data mode disabled
<6>[ 25.592743] mmc1: 4 bit data mode enabled
<6>[ 25.592763] mmc1: polling status mode disabled
<6>[ 25.592789] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
<6>[ 25.592813] mmc1: Slot eject status = 1
<6>[ 25.592833] mmc1: Power save feature enable = 1
<6>[ 25.592859] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x24ae0000
<6>[ 25.592888] mmc1: DM cmd busaddr 0x24ae0000, cmdptr busaddr 0x24af7f40
<6>[ 25.593761] usbcore: registered new interface driver usbhid
<6>[ 25.593784] usbhid: USB HID core driver
<6>[ 25.594668] logger: created 256K log 'log_main'
<6>[ 25.594894] logger: created 256K log 'log_events'
<6>[ 25.595138] logger: created 256K log 'log_radio'
<6>[ 25.595353] logger: created 256K log 'log_system'
<4>[ 25.598319] [Silent Value] : 0
<4>[ 25.598801] [BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
<4>[ 25.598826] [PAM:aaaaaaaa ] ++FSR_PAM_Init
<4>[ 25.598891] [PAM: ] --FSR_PAM_Init
<4>[ 25.599086] [BIF: ] FSR VERSION: FSR_1.2.1p1_b129_RTM
<4>[ 25.599146] [OND:INF] FSR_OND_4K_Open(nDev:0, pParam:0xd1e2bed0, nFlag:0x00000000) / 1096 line
<4>[ 25.599178] pstOND4kCxt->nBaseAddr: 0x00000000
<4>[ 25.599214] nDev=0, nMID=0x00ec, nDID=0x0050, nVID=0x0241
<4>[ 25.599248] [OND:INF] pstOND4kCxt->nSysConf1:0x80fe / 1179 line
<4>[ 25.599279] [OND:INF] pstOND4kCxt->nBlksForSLCArea[0]:2048 / 1196 line
<4>[ 25.599418] [OND:INF] assuming Word Write Cycle: 70 nano second
<4>[ 25.599723] [OND:INF] Transfered 4096 bytes from DataRAM in 272 usec
<4>[ 25.599751] calculated Word Read Cycle: 131 nano second
<4>[ 25.599781] [OND:INF] pstOND4kCxt->nIntID :0x0000 / 1294 line
<4>[ 25.599806] [OND:INF] 1X_CACHEPGM CMD : 0x007f
<4>[ 25.599829] [OND:INF] 1X_PLOAD CMD : 0x0003
<4>[ 25.600391] [BBM:INF] Scan from 2004 to 2047 to find BML meta blocks (die: 0)
<4>[ 25.600816] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
<4>[ 25.604911] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
<4>[ 25.608883] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
<4>[ 25.612788] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
<4>[ 25.629981] [BBM:INF] a5a5 a5a5 ffff
<4>[ 25.650296] [OND:INF] FSR_OND_4K_FlushOp(nDev:0, nDie:0, nFlag:0x00000480) / 3664 line
<4>[ 25.650328] pstOND4kCxt->nFlushOpCaller : 1
<4>[ 25.650358] 1Lv read disturbance at nPbn:2045, nPgOffset:3, nFlag:0x00000001
<4>[ 25.655406] Detected at ECC Register[3]:0x0001
<4>[ 25.725243] [BBM: ] << DevNO:0, DieNO: 0 MAPPING INFORMATION >>
<4>[ 25.725269] [BBM: ] Bad Mark Information
<4>[ 25.725293] [BBM: ] - Bad Mark (0x2222) by erase error
<4>[ 25.725319] [BBM: ] - Bad Mark (0x4444) by write error
<4>[ 25.725739] [BBM: ] 0000: Sbn[ 61]==>Rbn[ 2042] / BadMark: 0x0000 / SLC / Lock: UL
<4>[ 25.725779] [BBM: ] << Total : 1 BAD-MAPPING INFORMATION >>
<4>[ 25.725806] [BIF: ] nPartition Information (nVol : 0)
<4>[ 25.725829] nVer : 0x10000
<4>[ 25.725861] 00 / nID:0x01 / nAttr:0x00001012 / 1stVun: 0 / Units: 6
<4>[ 25.725899] 01 / nID:0x02 / nAttr:0x00001012 / 1stVun: 6 / Units: 2
<4>[ 25.725938] 02 / nID:0x03 / nAttr:0x00001012 / 1stVun: 8 / Units: 3
<4>[ 25.725976] 03 / nID:0x04 / nAttr:0x00001012 / 1stVun: 11 / Units: 100
<4>[ 25.726014] 04 / nID:0x23 / nAttr:0x00001101 / 1stVun: 111 / Units: 36
<4>[ 25.726053] 05 / nID:0x25 / nAttr:0x00001101 / 1stVun: 147 / Units: 20
<4>[ 25.726093] 06 / nID:0x05 / nAttr:0x00001012 / 1stVun: 167 / Units: 8
<4>[ 25.726131] 07 / nID:0x06 / nAttr:0x00001012 / 1stVun: 175 / Units: 32
<4>[ 25.726169] 08 / nID:0x07 / nAttr:0x00001012 / 1stVun: 207 / Units: 32
<4>[ 25.726208] 09 / nID:0x08 / nAttr:0x00001012 / 1stVun: 239 / Units: 3
<4>[ 25.726246] 10 / nID:0x09 / nAttr:0x00001001 / 1stVun: 242 / Units: 24
<4>[ 25.726284] 11 / nID:0x21 / nAttr:0x00001101 / 1stVun: 266 / Units: 869
<4>[ 25.726324] 12 / nID:0x22 / nAttr:0x00001101 / 1stVun: 1135 / Units: 753
<4>[ 25.726363] 13 / nID:0x24 / nAttr:0x00001101 / 1stVun: 1888 / Units: 116
<4>[ 25.726424] [BBM:INF] The registered blocks in ERL are handled
<4>[ 25.726449] [BBM:INF] (number of blocks: 0)
<4>[ 25.740066] BML: Registered BML Driver.
<4>[ 25.740094] [fsr_init] BML functions for DGS are initialized
<4>[ 25.740126] [BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
<4>[ 25.740156] [BIF: ] FSR_BML_Init(nFlag:0x0, nRe:FSR_BML_ALREADY_INITIALIZED) / 1025 line
<4>[ 25.752411] FSR: Registered STL Driver.
<6>[ 25.754179] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
<3>[ 25.755138] msm_soc: ALSA MSM Mixer Setting
<6>[ 25.756181] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
<6>[ 25.757361] ALSA device list:
<6>[ 25.757384] #0: msm-audio
<6>[ 25.757693] u32 classifier
<6>[ 25.757716] Netfilter messages via NETLINK v0.30.
<6>[ 25.757869] nf_conntrack version 0.5.0 (4433 buckets, 17732 max)
<6>[ 25.758778] ctnetlink v0.93: registering with nfnetlink.
<6>[ 25.759068] xt_time: kernel timezone is -0000
<6>[ 25.759548] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 25.759803] arp_tables: (C) 2002 David S. Miller
<6>[ 25.759933] TCP cubic registered
<6>[ 25.760496] NET: Registered protocol family 10
<6>[ 25.764771] Mobile IPv6
<6>[ 25.764866] IPv6 over IPv4 tunneling driver
<6>[ 25.767579] NET: Registered protocol family 17
<6>[ 25.768161] Bluetooth: RFCOMM TTY layer initialized
<6>[ 25.768209] Bluetooth: RFCOMM socket layer initialized
<6>[ 25.768233] Bluetooth: RFCOMM ver 1.11
<6>[ 25.768256] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 25.768278] Bluetooth: BNEP filters: protocol multicast
<6>[ 25.768303] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 25.768531] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>[ 25.772909] clock_late_init() disabled 23 unused clocks
<6>[ 25.773146] cpufreq: cpu0 init at 400000 switching to 320000
<6>[ 25.773504] cpufreq_interactive_input_connect: connect to sec_touchscreen
<7>[ 25.775926] msmrtc_tod_proc_result: 11/03/2014 02:23:40 (00)
<6>[ 25.776011] rs30000048 rs30000048.65536: setting system clock to 2014-11-03 02:23:40 UTC (1414981420)
<4>[ 25.776678] multipdp_init:multipdp_rx_noti_regi calling
<4>[ 25.777993] Warning: unable to open an initial console.
<6>[ 25.778756] Freeing init memory: 184K
<7>[ 25.795144] SELinux: 1024 avtab hash slots, 2816 rules.
<7>[ 25.797551] SELinux: 1024 avtab hash slots, 2816 rules.
<7>[ 25.797578] SELinux: 1 users, 2 roles, 292 types, 1 bools, 1 sens, 1024 cats
<7>[ 25.797596] SELinux: 84 classes, 2816 rules
<7>[ 25.800103] SELinux: Completing initialization.
<7>[ 25.800121] SELinux: Setting up existing superblocks.
<7>[ 25.800174] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[ 25.800213] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[ 25.800626] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[ 25.800654] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[ 25.800699] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 25.800748] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[ 25.801676] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[ 25.801708] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[ 25.801731] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[ 25.801761] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[ 25.801793] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), not configured for labeling
<7>[ 25.801838] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[ 25.801913] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 25.801963] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>[ 25.866556] type=1403 audit(1414981420.580:2): policy loaded auid=4294967295 ses=4294967295
<4>[ 25.866833] SELinux: Loaded policy from /sepolicy
<4>[ 25.876619] SELinux: Loaded file_contexts from /file_contexts
<5>[ 25.877541] type=1404 audit(1414981420.590:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
<4>[ 25.878656] dpram_open(): filp_open() failed~!: -2
<4>[ 25.878673] dpram_thread(): dpram_open failed! retry
<4>[ 25.976173] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[ 25.981183] mmc0: new high speed SDHC card at address b368
<6>[ 25.981688] mmcblk0: mmc0:b368 NCard 29.6 GiB
<6>[ 25.983711] mmcblk0: p1 p2
<4>[ 26.887998] dpram_open(): filp_open() failed~!: -2
<4>[ 26.888026] dpram_thread(): dpram_open failed! retry
<3>[ 27.647856] init: Warning! Service ueventd needs a SELinux domain defined; please fix!
<3>[ 27.648988] init: Warning! Service healthd needs a SELinux domain defined; please fix!
<3>[ 27.660168] healthd: wakealarm_init: timerfd_create failed
<7>[ 27.677649] i2c 2-0020: uevent
<7>[ 27.681481] fsa9280 3-0025: uevent
<7>[ 27.682706] bma_accel 5-0008: uevent
<7>[ 27.682878] taos 5-0039: uevent
<4>[ 27.898994] pdp_activate(): ttyCSD(id: 1) serial device is created.
<4>[ 27.899224] pdp_activate(): ttyEFS(id: 8) serial device is created.
<4>[ 27.899404] pdp_activate(): ttyGPS(id: 5) serial device is created.
<4>[ 27.899576] pdp_activate(): ttyXTRA(id: 6) serial device is created.
<4>[ 27.899746] pdp_activate(): ttySMD(id: 25) serial device is created.
<3>[ 27.923306] init: /dev/hw_random not found
<7>[ 27.924719] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<3>[ 27.924869] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
<3>[ 27.924899] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
<3>[ 27.929346] android_usb: already disabled
<3>[ 27.929824] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
<3>[ 27.929854] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
<3>[ 27.930331] init: /dev/hw_random not found
<3>[ 27.930416] init: Unable to open persistent property directory /data/property errno: 2
<3>[ 27.932681] init: Warning! Service healthd needs a SELinux domain defined; please fix!
<3>[ 27.933718] init: Warning! Service recovery needs a SELinux domain defined; please fix!
<3>[ 27.934729] android_usb: already disabled
<3>[ 27.935536] init: Warning! Service adbd needs a SELinux domain defined; please fix!
<3>[ 27.950143] healthd: wakealarm_init: timerfd_create failed
<6>[ 27.954648] adb_open
<6>[ 27.954694] adb_bind_config
<4>[ 28.028023] [BACLKIGHT] : 255
<4>[ 28.028044] Platform V:255, Find V:32
<4>[ 28.031046] LCD Baklight init - first boot time
<4>[ 28.031063] LCD Backlight re-init - wakeup time tune:32, lcd:32
<4>[ 28.048998] [BIF: ] FSR VERSION: FSR_1.2.1p1_b129_RTM
<4>[ 28.049029] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:2) / 1167 line
<4>[ 28.049113] [SIF:INF] ===> STL Clst[ 4] Scan Root Info
<4>[ 28.050256] [SIF:INF] ===> STL Zone[ 4, 0] Open Zone Meta
<4>[ 28.052138] [SIF:INF] Latest Header Index ( 0) Vbn ( 84)
<4>[ 28.060654] [SIF:INF] Latest Header Clean Page Offset ( 25)
<4>[ 28.060673] [SIF:INF] POR write timer : 0x1351
<4>[ 28.060993] [SIF:INF] Latest Context BlockIdx ( 0) Offset ( 24) Vpn ( 5400)
<4>[ 28.061333] [SIF:INF] Number of Free Block ( 2)
<4>[ 28.061346] [SIF:INF] Active Log List : Num ( 6)
<4>[ 28.061361] [SIF:INF] ===> STL Zone[ 4, 0] Open Zone Post
<4>[ 28.063026] [SIF:INF] Partition [0, 24] open is success
<4>[ 28.065936] [SIF:INF] Zone[ 4, 0]: nDgn( 0) nVbn( 111) S( 15)-E( 15) nCPOffs( 16)
<4>[ 28.092726] [SIF:INF] Zone[ 4, 0]: nDgn( 1) nVbn( 99) S( 0)-E( 20) nCPOffs( 21)
<4>[ 28.098689] [SIF:INF] Zone[ 4, 0]: nDgn( 56) nVbn( 103) S( 0)-E( 15) nCPOffs( 16)
<4>[ 28.101254] [SIF:INF] Zone[ 4, 0]: nDgn( 17) nVbn( 79) S( 0)-E( 5) nCPOffs( 6)
<4>[ 28.102229] [SIF:INF] Zone[ 4, 0]: nDgn( 2) nVbn( 22) S( 0)-E( 0) nCPOffs( 1)
<4>[ 28.103204] [SIF:INF] Zone[ 4, 0]: nDgn( 24) nVbn( 61) S( 0)-E( 0) nCPOffs( 1)
<4>[ 28.103226] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 0) nVbn( 111) nCPOffs( 64)
<4>[ 28.106163] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 1) nVbn( 99) nCPOffs( 64)
<4>[ 28.106654] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 56) nVbn( 103) nCPOffs( 64)
<4>[ 28.107156] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 17) nVbn( 79) nCPOffs( 64)
<4>[ 28.107658] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 2) nVbn( 22) nCPOffs( 64)
<4>[ 28.108161] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 24) nVbn( 61) nCPOffs( 64)
<4>[ 28.108734] [SIF:OUT] --FSR_STL_FlushAllMetaInfo()
<4>[ 28.108768] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 1)
<4>[ 28.109039] [BIF: ] FSR VERSION: FSR_1.2.1p1_b129_RTM
<4>[ 28.109059] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:2) / 1167 line
<4>[ 28.109121] [SIF:INF] ===> STL Clst[ 4] Scan Root Info
<4>[ 28.110244] [SIF:INF] ===> STL Zone[ 4, 0] Open Zone Meta
<4>[ 28.112051] [SIF:INF] Latest Header Index ( 1) Vbn ( 96)
<4>[ 28.115394] [SIF:INF] Latest Header Clean Page Offset ( 10)
<4>[ 28.115409] [SIF:INF] POR write timer : 0x1352
<4>[ 28.115723] [SIF:INF] Latest Context BlockIdx ( 1) Offset ( 9) Vpn ( 6153)
<4>[ 28.116061] [SIF:INF] Number of Free Block ( 2)
<4>[ 28.116073] [SIF:INF] Active Log List : Num ( 0)
<4>[ 28.116089] [SIF:INF] ===> STL Zone[ 4, 0] Open Zone Post
<4>[ 28.116113] [SIF:INF] Partition [0, 24] open is success
<6>[ 28.136583] EXT4-fs (stl14): mounted filesystem with ordered data mode. Opts:
<7>[ 28.136649] SELinux: initialized (dev stl14, type ext4), uses xattr
<6>[ 28.161351] android_work: sent uevent USB_STATE=CONNECTED
<7>[ 28.263273] SELinux: initialized (dev mmcblk0p1, type fuseblk), uses genfs_contexts
<6>[ 28.282608] android_usb gadget: high speed config #1: android
<6>[ 28.282901] android_work: sent uevent USB_STATE=CONFIGURED
<4>[ 28.312998] [BIF: ] FSR VERSION: FSR_1.2.1p1_b129_RTM
<4>[ 28.313033] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:3) / 1167 line
<4>[ 28.313099] [SIF:INF] ===> STL Clst[ 2] Scan Root Info
<4>[ 28.314243] [SIF:INF] ===> STL Zone[ 2, 0] Open Zone Meta
<4>[ 28.320661] [SIF:INF] Latest Header Index ( 7) Vbn ( 339)
<4>[ 28.323363] [SIF:INF] Latest Header Clean Page Offset ( 8)
<4>[ 28.323379] [SIF:INF] POR write timer : 0x17a3
<4>[ 28.323988] [SIF:INF] Latest Context BlockIdx ( 7) Offset ( 7) Vpn (21703)
<4>[ 28.324326] [SIF:INF] Number of Free Block ( 2)
<4>[ 28.324338] [SIF:INF] Active Log List : Num ( 0)
<4>[ 28.324354] [SIF:INF] ===> STL Zone[ 2, 0] Open Zone Post
<4>[ 28.324379] [SIF:INF] Partition [0, 22] open is success
<4>[ 28.345791] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 2)
<4>[ 28.346049] [BIF: ] FSR VERSION: FSR_1.2.1p1_b129_RTM
<4>[ 28.346071] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:3) / 1167 line
<4>[ 28.346113] [SIF:INF] ===> STL Clst[ 2] Scan Root Info
<4>[ 28.347231] [SIF:INF] ===> STL Zone[ 2, 0] Open Zone Meta
<4>[ 28.353548] [SIF:INF] Latest Header Index ( 7) Vbn ( 339)
<4>[ 28.356239] [SIF:INF] Latest Header Clean Page Offset ( 8)
<4>[ 28.356254] [SIF:INF] POR write timer : 0x17a3
<4>[ 28.356859] [SIF:INF] Latest Context BlockIdx ( 7) Offset ( 7) Vpn (21703)
<4>[ 28.357198] [SIF:INF] Number of Free Block ( 2)
<4>[ 28.357209] [SIF:INF] Active Log List : Num ( 0)
<4>[ 28.357226] [SIF:INF] ===> STL Zone[ 2, 0] Open Zone Post
<4>[ 28.357248] [SIF:INF] Partition [0, 22] open is success
<6>[ 28.375081] EXT4-fs (stl13): mounted filesystem with ordered data mode. Opts:
<7>[ 28.375139] SELinux: initialized (dev stl13, type ext4), uses xattr
<4>[ 28.376794] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 0) nVbn( 439) nCPOffs( 6)
<4>[ 28.377051] [SIF:OUT] --FSR_STL_FlushAllMetaInfo()
<4>[ 28.377081] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 2)
<4>[ 28.388316] [BIF: ] FSR VERSION: FSR_1.2.1p1_b129_RTM
<4>[ 28.388343] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:3) / 1167 line
<4>[ 28.388388] [SIF:INF] ===> STL Clst[ 1] Scan Root Info
<4>[ 28.389529] [SIF:INF] ===> STL Zone[ 1, 0] Open Zone Meta
<4>[ 28.402926] [SIF:INF] Latest Header Index ( 2) Vbn ( 119)
<4>[ 28.405293] [SIF:INF] Latest Header Clean Page Offset ( 8)
<4>[ 28.405308] [SIF:INF] POR write timer : 0xd78
<4>[ 28.405913] [SIF:INF] Latest Context BlockIdx ( 2) Offset ( 7) Vpn ( 7623)
<4>[ 28.406251] [SIF:INF] Number of Free Block ( 2)
<4>[ 28.406264] [SIF:INF] Active Log List : Num ( 0)
<4>[ 28.406279] [SIF:INF] ===> STL Zone[ 1, 0] Open Zone Post
<4>[ 28.406303] [SIF:INF] Partition [0, 21] open is success
<4>[ 28.428186] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 2)
<4>[ 28.428441] [BIF: ] FSR VERSION: FSR_1.2.1p1_b129_RTM
<4>[ 28.428461] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:3) / 1167 line
<4>[ 28.428503] [SIF:INF] ===> STL Clst[ 1] Scan Root Info
<4>[ 28.429621] [SIF:INF] ===> STL Zone[ 1, 0] Open Zone Meta
<4>[ 28.442979] [SIF:INF] Latest Header Index ( 2) Vbn ( 119)
<4>[ 28.445339] [SIF:INF] Latest Header Clean Page Offset ( 8)
<4>[ 28.445354] [SIF:INF] POR write timer : 0xd78
<4>[ 28.445958] [SIF:INF] Latest Context BlockIdx ( 2) Offset ( 7) Vpn ( 7623)
<4>[ 28.446293] [SIF:INF] Number of Free Block ( 2)
<4>[ 28.446306] [SIF:INF] Active Log List : Num ( 0)
<4>[ 28.446321] [SIF:INF] ===> STL Zone[ 1, 0] Open Zone Post
<4>[ 28.446343] [SIF:INF] Partition [0, 21] open is success
<6>[ 28.464111] EXT4-fs (stl12): mounted filesystem with ordered data mode. Opts:
<7>[ 28.464164] SELinux: initialized (dev stl12, type ext4), uses xattr
<4>[ 28.465691] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 0) nVbn( 637) nCPOffs( 6)
<4>[ 28.465946] [SIF:OUT] --FSR_STL_FlushAllMetaInfo()
<4>[ 28.465976] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 2)
<6>[ 28.534921] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts:
<7>[ 28.534973] SELinux: initialized (dev mmcblk0p2, type ext4), uses xattr
<6>[ 28.948029]
<6>[ 28.948043] Charger Type: STD DOWNSTREAM PORT
<6>[ 29.205343] adb_release
<3>[ 29.206939] android_usb: already disabled
<3>[ 29.207458] init: Warning! Service adbd needs a SELinux domain defined; please fix!
<6>[ 29.215111] mtp_open
<6>[ 29.232318] adb_open
<6>[ 29.232348] mtp_bind_config
<6>[ 29.232424] adb_bind_config
<6>[ 29.364439] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 29.465113] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 29.588819] android_usb gadget: high speed config #1: android
<6>[ 29.589328] android_work: sent uevent USB_STATE=CONFIGURED
<4>[ 32.156871] adbd (112): /proc/112/oom_adj is deprecated, please use /proc/112/oom_score_adj instead.
<3>[ 35.558393] [Battery] msm_batt_check_event (init_skip)
<3>[ 45.578109] [Battery] msm_batt_check_event
<4>[ 45.578504] [Battery] Currnet Charging state [5], Batt temp [300], Batt Level [3702], Percent [100]
<3>[ 55.598159] [Battery] msm_batt_check_event
<4>[ 55.598498] [Battery] Currnet Charging state [5], Batt temp [300], Batt Level [3703], Percent [100]
<4>[ 59.239218] [BACLKIGHT] : 5
<4>[ 59.239293] Platform V:5, Find V:3
<4>[ 61.241011] [BACLKIGHT] : 0
<4>[ 61.241084] Platform V:0, Find V:0
<4>[ 61.244139] LCD Backlight OFF. tune:0,lcd:0
<4>[ 61.268053] [HSIL] mdp_lcdc_off(352) mdp_lcdc_off end
<4>[ 61.268091] s6d16a0x_COOPER start lcdc_s6d16a0x_panel_off
<4>[ 61.408183] s6d16a0x_COOPER start s6d16a0x_disp_powerdown
<3>[ 65.618121] [Battery] msm_batt_check_event
<4>[ 65.618498] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3703], Percent [100]
<3>[ 75.638086] [Battery] msm_batt_check_event
<4>[ 75.638414] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3703], Percent [100]
<3>[ 85.658059] [Battery] msm_batt_check_event
<4>[ 85.658404] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3704], Percent [100]
<3>[ 95.678064] [Battery] msm_batt_check_event
<4>[ 95.678408] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3705], Percent [100]
<3>[ 105.698059] [Battery] msm_batt_check_event
<4>[ 105.698406] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3704], Percent [100]
<3>[ 115.718068] [Battery] msm_batt_check_event
<4>[ 115.718461] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3705], Percent [100]
<3>[ 125.738061] [Battery] msm_batt_check_event
<4>[ 125.738408] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3706], Percent [100]
<3>[ 135.758048] [Battery] msm_batt_check_event
<4>[ 135.758381] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3706], Percent [100]
<3>[ 145.778048] [Battery] msm_batt_check_event
<4>[ 145.778376] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3706], Percent [100]
<3>[ 155.798048] [Battery] msm_batt_check_event
<4>[ 155.798373] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3705], Percent [100]
<3>[ 165.818043] [Battery] msm_batt_check_event
<4>[ 165.818381] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3705], Percent [100]
<3>[ 175.838049] [Battery] msm_batt_check_event
<4>[ 175.838379] [Battery] Currnet Charging state [5], Batt temp [250], Batt Level [3706], Percent [100]
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment