iliad italy IMS Config - Redmi Note 13 Pro 5G OS1.0.1.0.UNRCNXM

iwlan_s2b_config.xml

<?xml version="1.0" ?>
<IWLAN_S2B_CONFIG>
    <GENERIC_VARIANT>
        <epdg_addr_info>
            <static_fqdn_enabled>FALSE</static_fqdn_enabled>
            <ip_pref>IP6_ONLY</ip_pref>
        </epdg_addr_info>
        <ikev2_info>
            <ke_payload_enabled>FALSE</ke_payload_enabled>
            <self_id>
                <id_type>ID_RFC822_ADDR</id_type>
                <mac_enabled>FALSE</mac_enabled>
                <identifier/>
            </self_id>
            <peer_id>
                <id_type>ID_KEY_ID</id_type>
            </peer_id>
            <ikev2_encr_algo_list>
                <encr_algo value="12">
                    <key_size>128</key_size>
                </encr_algo>
            </ikev2_encr_algo_list>
            <ikev2_hash_algo_list>
                <algo value="2"/>
            </ikev2_hash_algo_list>
            <ikev2_dh_group_list>
                <dh_group value="2"/>
            </ikev2_dh_group_list>
            <esp_encr_algo_list>
                <encr_algo value="12">
                    <key_size>128</key_size>
                </encr_algo>
            </esp_encr_algo_list>
            <esp_auth_algo_list>
                <algo value="2"/>
            </esp_auth_algo_list>
            <ikev2_sa_rekey_timer>
                <soft_sec>86300</soft_sec>
                <hard_sec>86400</hard_sec>
             </ikev2_sa_rekey_timer>
             <esp_rekey_timer>
                <soft_sec>28700</soft_sec>
                <hard_sec>28800</hard_sec>
             </esp_rekey_timer>
        </ikev2_info>
    </GENERIC_VARIANT>
    <WP_VARIANT>
        <ikev2_info>
            <esp_auth_algo_list>
                <algo value="1"/>
                <algo value="2"/>
            </esp_auth_algo_list>
            <configured_ike_port>4500</configured_ike_port>
        </ikev2_info>
    </WP_VARIANT>
</IWLAN_S2B_CONFIG>

overideconfig

[QIPCALL:ImsMediaProfileConfig]

*AudioProfile1 = "EVS_0_126;AMR_1_104;AMR_4_110;AMR_0_102;AMR_2_108"

[QIPCALL:EVS_0]

*BitRate = 4095

*Bandwidth = 6

*hf_only = 0

*ch_aw_recv = -1

*Dtx_enable = 1

[QIPCALL:ImsCodecConfig]

*EVSCMRinclusionpolicyOffer = 1

*EVSCMRinclusionpolicyAnswer = 1

[Ut:UtConfiguration]

*BlockRequestIfNullRule = 0

[QIPCALL:ImsVideoConfig]

*vtImpactedByDataSetting = 0

[QIPCALL:ImsVoiceConfig]

#This config is required to enable 380 response validation as per 3GPP.

*enableAlternateSrvRspCheck = 0

#This config is required to send permanent failiure instead of alternate emergency service for non standrad emergency service.

*sendPermanentFailon380 = 1