-
-
Save HandyMenny/61df74125a0790e01d69ac4618d2c481 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
DDR Version V1.10 20190926 | |
In | |
ID:0xFFF | |
330MHz | |
DDR3 | |
Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB | |
mach:2 | |
OUT | |
U-Boot SPL 2021.04-armbian (Aug 08 2021 - 18:00:55 +0200) | |
Trying to boot from MMC2 | |
INF [0x0] TEE-CORE:init_primary_helper:377: Initializing (1.1.0-333-gc9d95d1 #2 2018年 08月 17日 星期五 03:32:22 UTC arm) | |
INF [0x0] TEE-CORE:init_primary_helper:378: Release version: 2.0 | |
INF [0x0] TEE-CORE:init_primary_helper:379: Next entry point address: 0x61000000 | |
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done | |
U-Boot 2021.04-armbian (Aug 08 2021 - 18:00:55 +0200) | |
Model: Generic Rockchip rk322x TV Box board | |
DRAM: 1010 MiB | |
MMC: dwmmc@30000000: 1, dwmmc@30020000: 0 | |
Loading Environment from EXT4... ** File not found /boot/boot.env ** | |
** Unable to read "/boot/boot.env" from mmc0:1 ** | |
In: serial@11030000 | |
Out: serial@11030000 | |
Err: serial@11030000 | |
Model: Generic Rockchip rk322x TV Box board | |
Net: eth0: ethernet@30200000 | |
starting USB... | |
Bus usb@30040000: USB DWC2 | |
Bus usb@30080000: USB EHCI 1.00 | |
Bus usb@300c0000: USB EHCI 1.00 | |
Bus usb@30100000: USB EHCI 1.00 | |
scanning bus usb@30040000 for devices... 1 USB Device(s) found | |
scanning bus usb@30080000 for devices... 1 USB Device(s) found | |
scanning bus usb@300c0000 for devices... 1 USB Device(s) found | |
scanning bus usb@30100000 for devices... 1 USB Device(s) found | |
scanning usb for storage devices... 0 Storage Device(s) found | |
Hit any key to stop autoboot: 0 | |
switch to partitions #0, OK | |
mmc1 is current device | |
Scanning mmc 1:1... | |
Found U-Boot script /boot/boot.scr | |
3127 bytes read in 6 ms (508.8 KiB/s) | |
## Executing script at 60000000 | |
gpio: pin D25 (gpio 121) value is 1 | |
Boot script loaded from mmc 1 | |
165 bytes read in 5 ms (32.2 KiB/s) | |
6917413 bytes read in 317 ms (20.8 MiB/s) | |
9619000 bytes read in 438 ms (20.9 MiB/s) | |
43020 bytes read in 10 ms (4.1 MiB/s) | |
232 bytes read in 8 ms (28.3 KiB/s) | |
Applying kernel provided DT fixup script (rk322x-fixup.scr) | |
## Executing script at 600f0000 | |
## Loading init Ramdisk from Legacy Image at 64000000 ... | |
Image Name: uInitrd | |
Image Type: ARM Linux RAMDisk Image (gzip compressed) | |
Data Size: 6917349 Bytes = 6.6 MiB | |
Load Address: 00000000 | |
Entry Point: 00000000 | |
Verifying Checksum ... OK | |
## Flattened Device Tree blob at 61f00000 | |
Booting using the fdt blob at 0x61f00000 | |
EHCI failed to shut down host controller. | |
EHCI failed to shut down host controller. | |
Using Device Tree in place at 61f00000, end 61f72fff | |
Starting kernel ... | |
DDR Version V1.10 20190926 | |
In | |
ID:0xFFF | |
330MHz | |
DDR3 | |
Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB | |
mach:2 | |
OUT | |
U-Boot SPL 2021.04-armbian (Aug 08 2021 - 18:00:55 +0200) | |
Trying to boot from MMC2 | |
INF [0x0] TEE-CORE:init_primary_helper:377: Initializing (1.1.0-333-gc9d95d1 #2 2018年 08月 17日 星期五 03:32:22 UTC arm) | |
INF [0x0] TEE-CORE:init_primary_helper:378: Release version: 2.0 | |
INF [0x0] TEE-CORE:init_primary_helper:379: Next entry point address: 0x61000000 | |
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done | |
U-Boot 2021.04-armbian (Aug 08 2021 - 18:00:55 +0200) | |
Model: Generic Rockchip rk322x TV Box board | |
DRAM: 1010 MiB | |
MMC: dwmmc@30000000: 1, dwmmc@30020000: 0 | |
Loading Environment from EXT4... ** File not found /boot/boot.env ** | |
** Unable to read "/boot/boot.env" from mmc0:1 ** | |
In: serial@11030000 | |
Out: serial@11030000 | |
Err: serial@11030000 | |
Model: Generic Rockchip rk322x TV Box board | |
Net: eth0: ethernet@30200000 | |
starting USB... | |
Bus usb@30040000: USB DWC2 | |
Bus usb@30080000: USB EHCI 1.00 | |
Bus usb@300c0000: USB EHCI 1.00 | |
Bus usb@30100000: USB EHCI 1.00 | |
scanning bus usb@30040000 for devices... 1 USB Device(s) found | |
scanning bus usb@30080000 for devices... 1 USB Device(s) found | |
scanning bus usb@300c0000 for devices... 1 USB Device(s) found | |
scanning bus usb@30100000 for devices... 1 USB Device(s) found | |
scanning usb for storage devices... 0 Storage Device(s) found | |
Hit any key to stop autoboot: 0 | |
switch to partitions #0, OK | |
mmc1 is current device | |
Scanning mmc 1:1... | |
Found U-Boot script /boot/boot.scr | |
3127 bytes read in 6 ms (508.8 KiB/s) | |
## Executing script at 60000000 | |
gpio: pin D25 (gpio 121) value is 1 | |
Boot script loaded from mmc 1 | |
165 bytes read in 5 ms (32.2 KiB/s) | |
6917413 bytes read in 317 ms (20.8 MiB/s) | |
9619000 bytes read in 438 ms (20.9 MiB/s) | |
43020 bytes read in 10 ms (4.1 MiB/s) | |
232 bytes read in 8 ms (28.3 KiB/s) | |
Applying kernel provided DT fixup script (rk322x-fixup.scr) | |
## Executing script at 600f0000 | |
## Loading init Ramdisk from Legacy Image at 64000000 ... | |
Image Name: uInitrd | |
Image Type: ARM Linux RAMDisk Image (gzip compressed) | |
Data Size: 6917349 Bytes = 6.6 MiB | |
Load Address: 00000000 | |
Entry Point: 00000000 | |
Verifying Checksum ... OK | |
## Flattened Device Tree blob at 61f00000 | |
Booting using the fdt blob at 0x61f00000 | |
EHCI failed to shut down host controller. | |
EHCI failed to shut down host controller. | |
Using Device Tree in place at 61f00000, end 61f72fff | |
Starting kernel ... |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment