usb-uarth-dmesg

DDR Version V1.10 20190926
In
ID:0xFFF
330MHz
DDR3
Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
mach:2
OUT

U-Boot SPL 2021.04-armbian (Aug 08 2021 - 18:00:55 +0200)
Trying to boot from MMC2
INF [0x0] TEE-CORE:init_primary_helper:377: Initializing (1.1.0-333-gc9d95d1 #2 2018年 08月 17日 星期五 03:32:22 UTC arm)

INF [0x0] TEE-CORE:init_primary_helper:378: Release version: 2.0

INF [0x0] TEE-CORE:init_primary_helper:379: Next entry point address: 0x61000000

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done


U-Boot 2021.04-armbian (Aug 08 2021 - 18:00:55 +0200)

Model: Generic Rockchip rk322x TV Box board
DRAM:  1010 MiB
MMC:   dwmmc@30000000: 1, dwmmc@30020000: 0
Loading Environment from EXT4... ** File not found /boot/boot.env **

** Unable to read "/boot/boot.env" from mmc0:1 **
In:    serial@11030000
Out:   serial@11030000
Err:   serial@11030000
Model: Generic Rockchip rk322x TV Box board
Net:   eth0: ethernet@30200000
starting USB...
Bus usb@30040000: USB DWC2
Bus usb@30080000: USB EHCI 1.00
Bus usb@300c0000: USB EHCI 1.00
Bus usb@30100000: USB EHCI 1.00
scanning bus usb@30040000 for devices... 1 USB Device(s) found
scanning bus usb@30080000 for devices... 1 USB Device(s) found
scanning bus usb@300c0000 for devices... 1 USB Device(s) found
scanning bus usb@30100000 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3127 bytes read in 6 ms (508.8 KiB/s)
## Executing script at 60000000
gpio: pin D25 (gpio 121) value is 1
Boot script loaded from mmc 1
187 bytes read in 5 ms (36.1 KiB/s)
6917413 bytes read in 318 ms (20.7 MiB/s)
9619000 bytes read in 438 ms (20.9 MiB/s)
43020 bytes read in 10 ms (4.1 MiB/s)
232 bytes read in 8 ms (28.3 KiB/s)
Applying kernel provided DT fixup script (rk322x-fixup.scr)
## Executing script at 600f0000
## Loading init Ramdisk from Legacy Image at 64000000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    6917349 Bytes = 6.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 61f00000
   Booting using the fdt blob at 0x61f00000
EHCI failed to shut down host controller.
EHCI failed to shut down host controller.
   Using Device Tree in place at 61f00000, end 61f72fff

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0xf00
[    0.000000] Linux version 5.15.25-rk322x (root@d885b9fa09c2) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #22.02.1 SMP PREEMPT Sun Feb 27 09:06:05 UTC 2022
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Generic RK322x Tv Box board
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 16 MiB at 0x9f000000
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000060000000-0x000000009fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000060000000-0x00000000683fffff]
[    0.000000]   node   0: [mem 0x0000000069200000-0x000000009fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000009fffffff]
[    0.000000] On node 0, zone Normal: 512 pages in unavailable ranges
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv65535.65535 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 16 pages/cpu s35212 r8192 d22132 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 256256
[    0.000000] Kernel command line: earlyprintk root=UUID=31798217-04e3-40f9-8ebe-859ef0732ddf console=ttyS2,115200n8 console=tty1 rootwait rootfstype=ext4  consoleblank=0 loglevel=7 ubootpart=25a99261-01 usb-storage.quirks= coherent_pool=2M console=ttyS2,115200n8  cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Unknown kernel command line parameters "earlyprintk ubootpart=25a99261-01 cgroup_enable=memory cgroup_memory=1", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] allocated 1048576 bytes of page_ext
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 976752K/1034240K available (15360K kernel code, 1915K rwdata, 3120K rodata, 1024K init, 549K bss, 41104K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 48325 entries in 142 pages
[    0.000000] ftrace: allocated 142 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x530/0x70c with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000026] Switching to timer-based delay loop, resolution 41ns
[    0.001468] Console: colour dummy device 80x30
[    0.002463] printk: console [tty1] enabled
[    0.002542] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002601] pid_max: default: 32768 minimum: 301
[    0.002788] LSM: Security Framework initializing
[    0.002844] Yama: becoming mindful.
[    0.002988] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.003046] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.004609] CPU: Testing write buffer coherency: ok
[    0.005200] /cpus/cpu@f00 missing clock-frequency property
[    0.005301] /cpus/cpu@f01 missing clock-frequency property
[    0.005354] /cpus/cpu@f02 missing clock-frequency property
[    0.005406] /cpus/cpu@f03 missing clock-frequency property
[    0.005448] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[    0.006793] Setting up static identity map for 0x60100000 - 0x60100060
[    0.007064] rcu: Hierarchical SRCU implementation.
[    0.008166] smp: Bringing up secondary CPUs ...
[    0.009380] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[    0.010789] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[    0.012078] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[    0.012286] smp: Brought up 1 node, 4 CPUs
[    0.012405] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.012437] CPU: All CPU(s) started in SVC mode.
[    0.013559] devtmpfs: initialized
[    0.027360] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.027787] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.027872] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029592] pinctrl core: initialized pinctrl subsystem
[    0.031385] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.036019] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.037069] audit: initializing netlink subsys (disabled)
[    0.037596] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
[    0.038798] thermal_sys: Registered thermal governor 'step_wise'
[    0.039405] cpuidle: using governor ladder
[    0.039519] cpuidle: using governor menu
[    0.040363] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.040428] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.040847] Rockchip SIP initialized, version 0x2
[    0.058206] platform 200a0000.hdmi: Fixing up cyclic dependency with 20050000.vop
[    0.072820] rockchip-gpio 11110000.gpio0: probed /pinctrl/gpio0@11110000
[    0.074228] rockchip-gpio 11120000.gpio1: probed /pinctrl/gpio1@11120000
[    0.075283] rockchip-gpio 11130000.gpio2: probed /pinctrl/gpio2@11130000
[    0.076424] rockchip-gpio 11140000.gpio3: probed /pinctrl/gpio3@11140000
[    0.180971] raid6: neonx8   gen()   640 MB/s
[    0.249137] raid6: neonx8   xor()   472 MB/s
[    0.317332] raid6: neonx4   gen()   680 MB/s
[    0.385504] raid6: neonx4   xor()   504 MB/s
[    0.453675] raid6: neonx2   gen()   739 MB/s
[    0.521851] raid6: neonx2   xor()   527 MB/s
[    0.590024] raid6: neonx1   gen()   659 MB/s
[    0.658205] raid6: neonx1   xor()   457 MB/s
[    0.726455] raid6: int32x8  gen()   191 MB/s
[    0.794491] raid6: int32x8  xor()   118 MB/s
[    0.862739] raid6: int32x4  gen()   203 MB/s
[    0.930857] raid6: int32x4  xor()   146 MB/s
[    0.998941] raid6: int32x2  gen()   247 MB/s
[    1.067084] raid6: int32x2  xor()   143 MB/s
[    1.135251] raid6: int32x1  gen()   257 MB/s
[    1.203400] raid6: int32x1  xor()   139 MB/s
[    1.203429] raid6: using algorithm neonx2 gen() 739 MB/s
[    1.203456] raid6: .... xor() 527 MB/s, rmw enabled
[    1.203480] raid6: using neon recovery algorithm
[    1.205197] vcc_host: supplied by vcc_sys
[    1.205833] vccio_1v8: supplied by vcc_sys
[    1.206446] vccio_3v3: supplied by vcc_sys
[    1.207214] vcc_otg_vbus: supplied by vcc_sys
[    1.207806] vcc_phy: supplied by vccio_1v8
[    1.209051] iommu: Default domain type: Translated
[    1.209114] iommu: DMA domain TLB invalidation policy: strict mode
[    1.212758] SCSI subsystem initialized
[    1.213172] usbcore: registered new interface driver usbfs
[    1.213283] usbcore: registered new interface driver hub
[    1.213379] usbcore: registered new device driver usb
[    1.213562] mc: Linux media interface: v0.10
[    1.213634] videodev: Linux video capture interface: v2.00
[    1.213836] pps_core: LinuxPPS API ver. 1 registered
[    1.213867] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.213928] PTP clock support registered
[    1.217062] Bluetooth: Core ver 2.22
[    1.217215] NET: Registered PF_BLUETOOTH protocol family
[    1.217248] Bluetooth: HCI device and connection manager initialized
[    1.217291] Bluetooth: HCI socket layer initialized
[    1.217323] Bluetooth: L2CAP socket layer initialized
[    1.217400] Bluetooth: SCO socket layer initialized
[    1.217475] NetLabel: Initializing
[    1.217499] NetLabel:  domain hash size = 128
[    1.217522] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.217657] NetLabel:  unlabeled traffic allowed by default
[    1.219269] clocksource: Switched to clocksource arch_sys_counter
[    1.316125] VFS: Disk quotas dquot_6.6.0
[    1.316314] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.316657] FS-Cache: Loaded
[    1.317082] CacheFiles: Loaded
[    1.330580] NET: Registered PF_INET protocol family
[    1.330956] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.332849] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.333114] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.333252] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.333424] TCP: Hash tables configured (established 8192 bind 8192)
[    1.333677] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.333787] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.334187] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.336675] Trying to unpack rootfs image as initramfs...
[    1.337480] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    1.549986] Initialise system trusted keyrings
[    1.550596] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.557548] zbud: loaded
[    1.560252] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[    1.695938] xor: measuring software checksum speed
[    1.705688]    arm4regs        :  1036 MB/sec
[    1.719581]    8regs           :   716 MB/sec
[    1.733806]    32regs          :   695 MB/sec
[    1.743524]    neon            :  1028 MB/sec
[    1.743602] xor: using function: arm4regs (1036 MB/sec)
[    1.743647] async_tx: api initialized (async)
[    1.743684] Key type asymmetric registered
[    1.743717] Asymmetric key parser 'x509' registered
[    1.743981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    1.744482] io scheduler mq-deadline registered
[    1.744542] io scheduler kyber registered
[    1.744801] io scheduler bfq registered
[    1.761951] dma-pl330 110f0000.pdma: Loaded driver for PL330 DMAC-241330
[    1.762040] dma-pl330 110f0000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.764983] vdd_arm: supplied by vcc_sys
[    1.765881] vdd_log: supplied by vcc_sys
[    1.767084] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.771052] printk: console [ttyS2] disabled
[    1.771368] 11030000.serial: ttyS2 at MMIO 0x11030000 (irq = 38, base_baud = 1500000) is a 16550A
[    1.901511] Freeing initrd memory: 6756K
[    1.902375] printk: console [ttyS2] enabled
[    2.919915] rockchip-vop 20050000.vop: Adding to iommu group 2
[    2.930489] usbcore: registered new interface driver udl
[    2.938646] brd: module loaded
[    2.955716] loop: module loaded
[    2.962230] tun: Universal TUN/TAP device driver, 1.6
[    2.968444] CAN device driver interface
[    2.974025] rk_gmac-dwmac 30200000.ethernet: IRQ eth_wake_irq not found
[    2.981536] rk_gmac-dwmac 30200000.ethernet: IRQ eth_lpi not found
[    2.988659] rk_gmac-dwmac 30200000.ethernet: PTP uses main clock
[    2.995749] rk_gmac-dwmac 30200000.ethernet: clock input or output? (output).
[    3.003800] rk_gmac-dwmac 30200000.ethernet: TX delay(0x26).
[    3.010170] rk_gmac-dwmac 30200000.ethernet: RX delay(0x11).
[    3.016555] rk_gmac-dwmac 30200000.ethernet: integrated PHY? (yes).
[    3.023690] rk_gmac-dwmac 30200000.ethernet: cannot get clock clk_mac_speed
[    3.036662] rk_gmac-dwmac 30200000.ethernet: init for RMII
[    3.079712] rk_gmac-dwmac 30200000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    3.087838] rk_gmac-dwmac 30200000.ethernet:         DWMAC1000
[    3.093737] rk_gmac-dwmac 30200000.ethernet: DMA HW capability register supported
[    3.102155] rk_gmac-dwmac 30200000.ethernet: RX Checksum Offload Engine supported
[    3.110569] rk_gmac-dwmac 30200000.ethernet: COE Type 2
[    3.116451] rk_gmac-dwmac 30200000.ethernet: TX Checksum insertion supported
[    3.124375] rk_gmac-dwmac 30200000.ethernet: Wake-Up On Lan supported
[    3.131744] rk_gmac-dwmac 30200000.ethernet: Normal descriptors
[    3.138423] rk_gmac-dwmac 30200000.ethernet: Ring mode enabled
[    3.144989] rk_gmac-dwmac 30200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    3.174526] usbcore: registered new interface driver rt2500usb
[    3.181276] usbcore: registered new interface driver rt73usb
[    3.187734] usbcore: registered new interface driver rt2800usb
[    3.194384] usbcore: registered new interface driver rtl8xxxu
[    3.200935] usbcore: registered new interface driver rndis_wlan
[    3.207675] usbcore: registered new interface driver cdc_ether
[    3.214297] usbcore: registered new interface driver rndis_host
[    3.221879] dwc2 30040000.usb: supply vusb_d not found, using dummy regulator
[    3.230246] dwc2 30040000.usb: supply vusb_a not found, using dummy regulator
[    3.251885] dwc2 30040000.usb: DWC OTG Controller
[    3.257297] dwc2 30040000.usb: new USB bus registered, assigned bus number 1
[    3.265297] dwc2 30040000.usb: irq 58, io mem 0x30040000
[    3.271642] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.280975] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.289111] usb usb1: Product: DWC OTG Controller
[    3.294414] usb usb1: Manufacturer: Linux 5.15.25-rk322x dwc2_hsotg
[    3.301464] usb usb1: SerialNumber: 30040000.usb
[    3.307772] hub 1-0:1.0: USB hub found
[    3.312151] hub 1-0:1.0: 1 port detected
[    3.318595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.326202] ehci-platform: EHCI generic platform driver
[    3.334904] ehci-platform 30080000.usb: EHCI Host Controller
[    3.341746] ehci-platform 30080000.usb: new USB bus registered, assigned bus number 2
[    3.351435] ehci-platform 30080000.usb: irq 59, io mem 0x30080000
[    3.371310] ehci-platform 30080000.usb: USB 2.0 started, EHCI 1.00
[    3.378619] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.387957] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.396092] usb usb2: Product: EHCI Host Controller
[    3.401587] usb usb2: Manufacturer: Linux 5.15.25-rk322x ehci_hcd
[    3.408442] usb usb2: SerialNumber: 30080000.usb
[    3.414667] hub 2-0:1.0: USB hub found
[    3.419021] hub 2-0:1.0: 1 port detected
[    3.426660] ehci-platform 300c0000.usb: EHCI Host Controller
[    3.433714] ehci-platform 300c0000.usb: new USB bus registered, assigned bus number 3
[    3.443409] ehci-platform 300c0000.usb: irq 61, io mem 0x300c0000
[    3.619308] usb 1-1: new low-speed USB device number 2 using dwc2
[    3.635298] ehci-platform 300c0000.usb: USB 2.0 started, EHCI 1.00
[    3.642655] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.652002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.660137] usb usb3: Product: EHCI Host Controller
[    3.665632] usb usb3: Manufacturer: Linux 5.15.25-rk322x ehci_hcd
[    3.672486] usb usb3: SerialNumber: 300c0000.usb
[    3.678634] hub 3-0:1.0: USB hub found
[    3.683011] hub 3-0:1.0: 1 port detected
[    3.690736] ehci-platform 30100000.usb: EHCI Host Controller
[    3.697556] ehci-platform 30100000.usb: new USB bus registered, assigned bus number 4
[    3.707211] ehci-platform 30100000.usb: irq 63, io mem 0x30100000
[    3.839301] ehci-platform 30100000.usb: USB 2.0 started, EHCI 1.00
[    3.846667] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    3.856107] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.864315] usb usb4: Product: EHCI Host Controller
[    3.869893] usb usb4: Manufacturer: Linux 5.15.25-rk322x ehci_hcd
[    3.872895] usb 1-1: New USB device found, idVendor=0a81, idProduct=0101, bcdDevice= 1.10
[    3.876824] usb usb4: SerialNumber: 30100000.usb
[    3.885954] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.892202] hub 4-0:1.0: USB hub found
[    3.899211] usb 1-1: Product: USB Keyboard
[    3.903514] hub 4-0:1.0: 1 port detected
[    3.908047] usb 1-1: Manufacturer: CHESEN
[    3.917884] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.924956] ohci-platform: OHCI generic platform driver
[    3.931594] ohci-platform 300a0000.usb: Generic Platform OHCI controller
[    3.940761] ohci-platform 300a0000.usb: new USB bus registered, assigned bus number 5
[    3.950200] ohci-platform 300a0000.usb: irq 60, io mem 0x300a0000
[    4.019620] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    4.028960] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.037092] usb usb5: Product: Generic Platform OHCI controller
[    4.043743] usb usb5: Manufacturer: Linux 5.15.25-rk322x ohci_hcd
[    4.050596] usb usb5: SerialNumber: 300a0000.usb
[    4.056777] hub 5-0:1.0: USB hub found
[    4.061129] hub 5-0:1.0: 1 port detected
[    4.066656] ohci-platform 300e0000.usb: Generic Platform OHCI controller
[    4.074998] ohci-platform 300e0000.usb: new USB bus registered, assigned bus number 6
[    4.084402] ohci-platform 300e0000.usb: irq 62, io mem 0x300e0000
[    4.155648] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    4.164997] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.173130] usb usb6: Product: Generic Platform OHCI controller
[    4.179791] usb usb6: Manufacturer: Linux 5.15.25-rk322x ohci_hcd
[    4.186646] usb usb6: SerialNumber: 300e0000.usb
[    4.192805] hub 6-0:1.0: USB hub found
[    4.197149] hub 6-0:1.0: 1 port detected
[    4.202677] ohci-platform 30120000.usb: Generic Platform OHCI controller
[    4.210922] ohci-platform 30120000.usb: new USB bus registered, assigned bus number 7
[    4.220359] ohci-platform 30120000.usb: irq 64, io mem 0x30120000
[    4.291645] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    4.300987] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.309117] usb usb7: Product: Generic Platform OHCI controller
[    4.315777] usb usb7: Manufacturer: Linux 5.15.25-rk322x ohci_hcd
[    4.322631] usb usb7: SerialNumber: 30120000.usb
[    4.328842] hub 7-0:1.0: USB hub found
[    4.333191] hub 7-0:1.0: 1 port detected
[    4.338802] usbcore: registered new interface driver usb-storage
[    4.346507] usbcore: registered new interface driver iforce
[    4.352990] usbcore: registered new interface driver xpad
[    4.359285] usbcore: registered new interface driver usbtouchscreen
[    4.367151] i2c_dev: i2c /dev entries driver
[    4.374633] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    4.384677] device-mapper: raid: Loading target version 1.15.1
[    4.391709] Bluetooth: HCI UART driver ver 2.3
[    4.396763] Bluetooth: HCI UART protocol H4 registered
[    4.402560] Bluetooth: HCI UART protocol ATH3K registered
[    4.408697] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    4.416001] Bluetooth: HCI UART protocol Broadcom registered
[    4.422518] usbcore: registered new interface driver bfusb
[    4.428812] usbcore: registered new interface driver btusb
[    4.436570] Synopsys Designware Multimedia Card Interface Driver
[    4.444738] dwmmc_rockchip 30010000.mmc: IDMAC supports 32-bit address mode.
[    4.444929] dwmmc_rockchip 30000000.mmc: IDMAC supports 32-bit address mode.
[    4.445566] dwmmc_rockchip 30020000.mmc: IDMAC supports 32-bit address mode.
[    4.468891] ledtrig-cpu: registered to indicate activity on CPUs
[    4.469005] dwmmc_rockchip 30020000.mmc: Using internal DMA controller.
[    4.475912] hid: raw HID events driver (C) Jiri Kosina
[    4.483368] dwmmc_rockchip 30020000.mmc: Version ID is 270a
[    4.484279] dwmmc_rockchip 30010000.mmc: Using internal DMA controller.
[    4.484299] dwmmc_rockchip 30010000.mmc: Version ID is 270a
[    4.484404] dwmmc_rockchip 30010000.mmc: DW MMC controller at irq 56,32 bit host data width,256 deep fifo
[    4.484722] dwmmc_rockchip 30010000.mmc: allocated mmc-pwrseq
[    4.484743] mmc_host mmc1: card is non-removable.
[    4.496000] dwmmc_rockchip 30000000.mmc: Using internal DMA controller.
[    4.503016] dwmmc_rockchip 30020000.mmc: DW MMC controller at irq 57,32 bit host data width,256 deep fifo
[    4.509269] dwmmc_rockchip 30000000.mmc: Version ID is 270a
[    4.509346] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 400000Hz, actual 244140HZ div = 2)
[    4.520299] mmc_host mmc2: card is non-removable.
[    4.526552] dwmmc_rockchip 30000000.mmc: DW MMC controller at irq 55,32 bit host data width,256 deep fifo
[    4.527362] input: CHESEN USB Keyboard as /devices/platform/30040000.usb/usb1/1-1/1-1:1.0/0003:0A81:0101.0001/input/input0
[    4.544583] mmc_host mmc2: Bus speed (slot 0) = 2343750Hz (slot req 400000Hz, actual 390625HZ div = 3)
[    4.550273] dwmmc_rockchip 30000000.mmc: Got CD GPIO
[    4.565667] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    4.579538] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    4.582818] mmc1: error -84 whilst initialising SDIO card
[    4.596594] hid-generic 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-30040000.usb-1/input0
[    4.619329] random: fast init done
[    4.632093] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 300000Hz, actual 244140HZ div = 2)
[    4.640599] input: CHESEN USB Keyboard System Control as /devices/platform/30040000.usb/usb1/1-1/1-1:1.1/0003:0A81:0101.0002/input/input1
[    4.658973] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    4.681786] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[    4.691700] mmc0: new high speed SDXC card at address aaaa
[    4.702810] mmc2: new high speed MMC card at address 0001
[    4.708606] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    4.708784] mmc1: error -5 whilst initialising SDIO card
[    4.710329] mmcblk0: mmc0:aaaa SC64G 59.5 GiB
[    4.716362] mmcblk2: mmc2:0001 008G92 7.28 GiB
[    4.718301]  mmcblk0: p1
[    4.739211] input: CHESEN USB Keyboard Consumer Control as /devices/platform/30040000.usb/usb1/1-1/1-1:1.1/0003:0A81:0101.0002/input/input2
[    4.745757]  mmcblk2: p1
[    4.759844] hid-generic 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-30040000.usb-1/input1
[    4.763423] mmcblk2boot0: mmc2:0001 008G92 4.00 MiB
[    4.775392] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 200000Hz, actual 162760HZ div = 3)
[    4.775677] usbcore: registered new interface driver usbhid
[    4.775690] usbhid: USB HID core driver
[    4.776262] ashmem: initialized
[    4.777005] rockchip-dfi 11210000.dfi: rk3228_dfi_init enter
[    4.777086] rockchip-dfi 11210000.dfi: rk3228-dfi initialized, dram type: 0x3, channels: 1
[    4.780744] NET: Registered PF_INET6 protocol family
[    4.784775] Segment Routing with IPv6
[    4.784791] mmcblk2boot1: mmc2:0001 008G92 4.00 MiB
[    4.793165] mmcblk2rpmb: mmc2:0001 008G92 512 KiB, chardev (241:0)
[    4.797809] In-situ OAM (IOAM) with IPv6
[    4.848065] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    4.857116] NET: Registered PF_PACKET protocol family
[    4.863109] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.877750] can: controller area network core
[    4.882854] NET: Registered PF_CAN protocol family
[    4.888657] Bluetooth: RFCOMM TTY layer initialized
[    4.894298] Bluetooth: RFCOMM socket layer initialized
[    4.900254] Bluetooth: RFCOMM ver 1.11
[    4.904593] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.911353] Bluetooth: HIDP socket layer initialized
[    4.917312] 8021q: 802.1Q VLAN Support v1.8
[    4.922194] lib80211: common routines for IEEE802.11 drivers
[    4.928748] Key type dns_resolver registered
[    4.934234] ThumbEE CPU extension supported.
[    4.939120] Registering SWP/SWPB emulation handler
[    4.945665] Loading compiled-in X.509 certificates
[    4.957111] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    4.958689] zswap: loaded using pool zstd/z3fold
[    4.973827] mmc1: error -5 whilst initialising SDIO card
[    4.980873] Key type ._fscrypt registered
[    4.985520] Key type .fscrypt registered
[    4.989982] Key type fscrypt-provisioning registered
[    4.997048] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    5.006521] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 100000Hz, actual 97656HZ div = 5)
[    5.030964] inno-hdmi-phy 12030000.hdmi-phy: IRQ index 0 not found
[    5.038381] inno-hdmi-phy 12030000.hdmi-phy: phy_flag is: 0
[    5.047456] rockchip-drm display-subsystem: bound 20050000.vop (ops 0xb106de7c)
[    5.056267] dwhdmi-rockchip 200a0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (inno_dw_hdmi_phy2)
[    5.068407] dwhdmi-rockchip 200a0000.hdmi: registered DesignWare HDMI I2C bus driver
[    5.078679] rockchip-drm display-subsystem: bound 200a0000.hdmi (ops 0xb10719c4)
[    5.128967] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    5.140137] mmc1: error -5 whilst initialising SDIO card
[    5.325288] Console: switching to colour frame buffer device 240x75
[    5.432962] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[    5.443973] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[    5.455188] of_cfs_init
[    5.458417] of_cfs_init: OK
[    5.462438] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.514598] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.523790] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.534171] cfg80211: failed to load regulatory.db
[    5.539894] dw-apb-uart 11030000.serial: forbid DMA for kernel console
[    5.555040] Freeing unused kernel image (initmem) memory: 1024K
[    5.583769] Run /init as init process
Loading, please wait...
Starting version 247.3-7
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
/dev/mmcblk0p1: recovering journal
/dev/mmcblk0p1: clean, 25608/50512 files, 174471/201728 blocks
done.
[    8.179633] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[    8.944664] systemd[1]: System time before build time, advancing clock.
[    9.013001] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    9.041398] systemd[1]: Detected architecture arm.

Welcome to Armbian 22.05.0-trunk Bullseye!

[    9.071686] systemd[1]: Set hostname to <rk322x-box>.
[   10.596366] systemd[1]: Queued start job for default target Graphical Interface.
[   10.608976] random: systemd: uninitialized urandom read (16 bytes read)
[   10.617694] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[   10.632978] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[   10.650493] systemd[1]: Created slice system-modprobe.slice.
[  OK  ] Created slice system-modprobe.slice.
[   10.675859] random: systemd: uninitialized urandom read (16 bytes read)
[   10.688422] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[   10.711914] random: systemd: uninitialized urandom read (16 bytes read)
[   10.723644] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[   10.748999] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active.
[  OK  ] Started Dispatch Password …tch when bootsplash is active.
[   10.780736] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[   10.810252] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  OK  ] Set up automount Arbitrary…s File System Automount Point.
[   10.840397] systemd[1]: Reached target Local Encrypted Volumes.
[  OK  ] Reached target Local Encrypted Volumes.
[   10.864505] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[   10.880118] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[   10.903948] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[   10.920164] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[   10.936183] systemd[1]: Reached target System Time Set.
[  OK  ] Reached target System Time Set.
[   10.961951] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[   10.981570] systemd[1]: Listening on fsck to fsckd communication Socket.
[  OK  ] Listening on fsck to fsckd communication Socket.
[   11.008862] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[   11.038111] systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
[   11.065689] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[   11.093879] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[   11.117686] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[   11.145292] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[   11.169714] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[   11.190457] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[   11.237895] systemd[1]: Mounting Kernel Debug File System...
         Mounting Kernel Debug File System...
[   11.290248] systemd[1]: Mounting Kernel Trace File System...
         Mounting Kernel Trace File System...
[   11.348975] systemd[1]: Starting Restore / save the current clock...
         Starting Restore / save the current clock...
[   11.408650] systemd[1]: Starting Set the console keyboard layout...
         Starting Set the console keyboard layout...
[   11.475083] systemd[1]: Starting Create list of static device nodes for the current kernel...
         Starting Create list of st…odes for the current kernel...
[   11.540834] systemd[1]: Starting Load Kernel Module configfs...
         Starting Load Kernel Module configfs...
[   11.601017] systemd[1]: Starting Load Kernel Module drm...
         Starting Load Kernel Module drm...
[   11.660916] systemd[1]: Starting Load Kernel Module fuse...
         Starting Load Kernel Module fuse...
[   11.722446] fuse: init (API version 7.34)
[   11.729655] systemd[1]: Started Nameserver information manager.
[  OK  ] Started Nameserver information manager.
[   11.803413] systemd[1]: Reached target Network (Pre).
[  OK  ] Reached target Network (Pre).
[   11.851208] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   11.880640] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   11.931882] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[   11.981605] systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
[   12.047663] systemd[1]: Starting Coldplug All udev Devices...
         Starting Coldplug All udev Devices...
[   12.131995] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[   12.168994] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none.
[   12.172447] random: crng init done
[   12.217874] random: 7 urandom warning(s) missed due to ratelimiting
[   12.254282] systemd[1]: Mounted Kernel Debug File System.
[  OK  ] Mounted Kernel Debug File System.
[   12.297790] systemd[1]: Mounted Kernel Trace File System.
[  OK  ] Mounted Kernel Trace File System.
[   12.345694] systemd[1]: Finished Restore / save the current clock.
[  OK  ] Finished Restore / save the current clock.
[   12.393057] systemd[1]: Finished Set the console keyboard layout.
[  OK  ] Finished Set the console keyboard layout.
[   12.441956] systemd[1]: Finished Create list of static device nodes for the current kernel.
[  OK  ] Finished Create list of st… nodes for the current kernel.
[   12.492712] systemd[1]: modprobe@configfs.service: Succeeded.
[   12.520211] systemd[1]: Finished Load Kernel Module configfs.
[  OK  ] Finished Load Kernel Module configfs.
[   12.567969] systemd[1]: modprobe@drm.service: Succeeded.
[   12.594313] systemd[1]: Finished Load Kernel Module drm.
[  OK  ] Finished Load Kernel Module drm.
[   12.639886] systemd[1]: modprobe@fuse.service: Succeeded.
[   12.666583] systemd[1]: Finished Load Kernel Module fuse.
[  OK  ] Finished Load Kernel Module fuse.
[   12.720818] systemd[1]: Finished Load Kernel Modules.
[  OK  ] Finished Load Kernel Modules.
[   12.760996] systemd[1]: Finished Remount Root and Kernel File Systems.
[  OK  ] Finished Remount Root and Kernel File Systems.
[   12.832703] systemd[1]: Mounting FUSE Control File System...
         Mounting FUSE Control File System...
[   12.879746] systemd[1]: Mounting Kernel Configuration File System...
         Mounting Kernel Configuration File System...
[   12.930534] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   12.957936] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   12.998545] systemd[1]: Starting Load/Save Random Seed...
         Starting Load/Save Random Seed...
[   13.050691] systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[   13.107918] systemd[1]: Starting Create System Users...
         Starting Create System Users...
[   13.166282] systemd[1]: Mounted FUSE Control File System.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Finished Load/Save Random Seed.
[  OK  ] Finished Apply Kernel Variables.
[  OK  ] Finished Create System Users.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Finished Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /tmp...
         Starting Rule-based Manage…for Device Events and Files...
[  OK  ] Mounted /tmp.
[  OK  ] Reached target Local File Systems.
         Starting Armbian ZRAM config...
         Starting Set console font and keymap...
[  OK  ] Finished Set console font and keymap.
[  OK  ] Finished Coldplug All udev Devices.
         Starting Helper to synchronize boot up for ifupdown...
[  OK  ] Finished Helper to synchronize boot up for ifupdown.
         Starting Raise network interfaces...
[  OK  ] Started Rule-based Manager for Device Events and Files.
[  OK  ] Found device /dev/ttyS2.