HectorTorres

import pyodbc
import time
import sys
import os
from datetime import datetime
from configparser import ConfigParser

dummyVar = 1
va = 12
vc = "Texto"

HectorTorres

 #String json_data = "{\"Sesor_id\":\"3E24R\",\"Value\":" + (String)randNumber + "}";

import serial, time, json
import matplotlib.pyplot as plt
import numpy as np

hw_sensor = serial.Serial(port='COM4', baudrate=115200, timeout=1, write_timeout=1)
fig, ax = plt.subplots()

t = np.linspace(0,20,21)

HectorTorres

long randNumber;
String inputString;

void setup(){
  Serial.begin(115200);
  randomSeed(analogRead(0));
  }

void loop(){
  delay(100);

HectorTorres

 #String json_data = "{\"Sesor_id\":\"3E24R\",\"Value\":" + (String)randNumber + "}";

import serial, time, json

hw_sensor = serial.Serial(port='COM4', baudrate=115200, timeout=1, write_timeout=1)

if __name__ == '__main__':
    while True:
        hw_sensor.write('getValue'.encode('utf-8'))
        time.sleep(1)

HectorTorres

import matplotlib.pyplot as plt
import numpy as np
import time


f=10
T=1/f

t = np.linspace(0,5*T,300)
diff=t[1]-t[0]

HectorTorres

import matplotlib.pyplot as plt
import numpy as np
import math

x = np.linspace(0, 10, 5000)

fig, ax = plt.subplots()  # Crea la figura y los ejes.
ax.plot(x, x*x)  # Grafica una funcion cuadratica
plt.show() # Llama a la grafica para que se muestre.

HectorTorres

#include <Servo.h>
#include <NewPing.h>

#define TRIGGER_PIN  12  // Arduino pin tied to trigger pin on the ultrasonic sensor.
#define ECHO_PIN     11  // Arduino pin tied to echo pin on the ultrasonic sensor.
#define MAX_DISTANCE 200// Maximum distance we want to ping for (in centimeters). Maximum sensor distance is rated at 400-500cm.

NewPing sonar(TRIGGER_PIN, ECHO_PIN, MAX_DISTANCE); // NewPing setup of pins and maximum distance.

Servo myservo;  // create servo object to control a servo

HectorTorres

#include <NewPing.h>
#include <Servo.h>

#define TRIGGER_PIN  13 
#define ECHO_PIN     12  
#define MAX_DISTANCE 50
#define TimeDelayServo 200


int pos; //Position Servo

HectorTorres

#define PinBuzzer 7
#define SoundTime 2000
#define PinSignal 8

void setup() {
  pinMode(PinBuzzer, OUTPUT);
  pinMode(PinSignal, INPUT);
}

void loop() {

HectorTorres

#define Led_full 7
#define Led_Eighty_percent 6
#define Led_medium 5
#define Led_minimun 4
#define Battery 0
#define Delay_ON_OFF 1500
float BatteryVoltage = 0;
const float full = 1.5;
const float Eighty_percent= 1.2; //Greater than 80 percent
const float medium= 0.9; //60 percent