Skip to content

Instantly share code, notes, and snippets.

@HighwayStar

HighwayStar/kuntao 4.9 usb

Created August 4, 2020 16:48
Show Gist options
  • Save HighwayStar/25968e8f07e60b5c586b6f7416376305 to your computer and use it in GitHub Desktop.
Save HighwayStar/25968e8f07e60b5c586b6f7416376305 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
kuntao 4.9 usb
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.112-perf+ (tomin@linux-13jc) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 4 23:42:56 +08 2020
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine: Kuntao p2b1
[ 0.000000] core_ctl: disable_cpumask=0-7
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ffc00000, size 4 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_region@0, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node gpu_region@0, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f000000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node venus_region@0, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: invalid size property in 'mem_dump_region' node.
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f4800000, size 180 MiB
[ 0.000000] OF: reserved mem: initialized node secure_region@0, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3800000, size 16 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_region@0, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3400000, size 4 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000084a00000, size 30 MiB
[ 0.000000] OF: reserved mem: initialized node other_ext_region@0, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086c00000, size 86 MiB
[ 0.000000] OF: reserved mem: initialized node modem_region@0, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008d600000, size 17 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_fw_region@0, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008e700000, size 7 MiB
[ 0.000000] OF: reserved mem: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
[ 0.000000] cma: Reserved 16 MiB at 0x00000000f2400000
[ 0.000000] On node 0 totalpages: 947200
[ 0.000000] DMA zone: 15360 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 947200 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] Did not receive the expected number of bytes from PRNG: 0
[ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc0f216b000 s55296 r8192 d30720 u94208
[ 0.000000] pcpu-alloc: s55296 r8192 d30720 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 931840
[ 0.000000] Kernel command line: core_ctl_disable_cpumask=0-7 kpti=0 console=null androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci androidboot.usbconfigfs=true androidboot.selinux=permissive buildvariant=eng androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 secureboot.ap_sbc=true secureboot.msa_sbc=true secureboot.imei=861157030307330 secureboot.unlock=true androidboot.secureversion=2 androidboot.serialno=ZY223MMBQK androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_mot_smd_549_1080p_cmd_v0 androidboot.radio=0x1 androidboot.device=kuntao androidboot.hwrev=0x83B0 androidboot.mode=normal androidboot.bootloader=0xC000 androidboot.bootreason=0x1,0x21 androidboot.wifimacaddr=CC:61:E5:D0:A2:D5,CC:61:E5:D0:A2:D6 androidboot.btmacaddr=CC:61:E5:D0:A2:D4 androidboot.last_reboot=1
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
[ 0.000000] log_buf_len min size: 131072 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 126480(96%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 3402236K/3788800K available (17916K kernel code, 2780K rwdata, 7580K rodata, 6144K init, 3004K bss, 144900K reserved, 241664K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8009200000 ( 17920 KB)
[ 0.000000] .rodata : 0xffffff8009200000 - 0xffffff8009a00000 ( 8192 KB)
[ 0.000000] .init : 0xffffff8009a00000 - 0xffffff800a000000 ( 6144 KB)
[ 0.000000] .data : 0xffffff800a000000 - 0xffffff800a2b7200 ( 2781 KB)
[ 0.000000] .bss : 0xffffff800a2b7200 - 0xffffff800a5a6320 ( 3005 KB)
[ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00400000 - 0xffffffbf04000000 ( 60 MB actual)
[ 0.000000] memory : 0xffffffc010000000 - 0xffffffc100000000 ( 3840 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] \x09RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000]
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** trace_printk() being used. Allocating extra memory. **
[ 0.000000] ** **
[ 0.000000] ** This means that this is a DEBUG kernel and it is **
[ 0.000000] ** unsafe for production use. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your vendor! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] \x09Offload RCU callbacks from all CPUs
[ 0.000000] \x09Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000021] clocksource: Switched to clocksource arch_sys_counter
[ 0.000989] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.001001] pid_max: default: 32768 minimum: 301
[ 0.001080] Security Framework initialized
[ 0.001090] SELinux: Initializing.
[ 0.001139] SELinux: Starting in permissive mode
[ 0.001175] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001186] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.002383] /cpus/cpu@0: Missing clock-frequency property
[ 0.002397] /cpus/cpu@1: Missing clock-frequency property
[ 0.002408] /cpus/cpu@2: Missing clock-frequency property
[ 0.002419] /cpus/cpu@3: Missing clock-frequency property
[ 0.002432] /cpus/cpu@100: Missing clock-frequency property
[ 0.002445] /cpus/cpu@101: Missing clock-frequency property
[ 0.002459] /cpus/cpu@102: Missing clock-frequency property
[ 0.002474] /cpus/cpu@103: Missing clock-frequency property
[ 0.002578] sched-energy: Sched-energy-costs installed from DT
[ 0.002592] ASID allocator initialised with 32768 entries
[ 0.018740] cpu_clock_pwr_init: Power clocks configured
[ 0.021024] MSM Memory Dump base table set up
[ 0.021052] MSM Memory Dump apps data table set up
[ 0.021208] EFI services will not be available.
[ 0.030039] CPU1: Booted secondary processor [410fd034]
[ 0.038659] CPU2: Booted secondary processor [410fd034]
[ 0.047252] CPU3: Booted secondary processor [410fd034]
[ 0.055955] CPU4: Booted secondary processor [410fd034]
[ 0.064593] CPU5: Booted secondary processor [410fd034]
[ 0.073235] CPU6: Booted secondary processor [410fd034]
[ 0.081927] CPU7: Booted secondary processor [410fd034]
[ 0.082197] Brought up 8 CPUs
[ 0.082226] SMP: Total of 8 processors activated.
[ 0.082235] CPU features: detected feature: 32-bit EL0 Support
[ 0.082242] CPU features: kernel page table isolation forced OFF by command line option
[ 0.082253] CPU: All CPU(s) started at EL1
[ 0.082330] alternatives: patching kernel code
[ 0.082551] CPU7: update max cpu_capacity 1024
[ 0.090050] CPU7: update max cpu_capacity 1024
[ 0.138534] DMI not present or invalid.
[ 0.138954] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.138976] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.149053] pinctrl core: initialized pinctrl subsystem
[ 0.149848] NET: Registered protocol family 16
[ 0.152455] schedtune: init normalization constants...
[ 0.152468] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 180
[ 0.152476] schedtune: CPU[0] min_pwr: 1 max_pwr: 65
[ 0.152483] schedtune: CPU[1] min_pwr: 1 max_pwr: 65
[ 0.152490] schedtune: CPU[2] min_pwr: 1 max_pwr: 65
[ 0.152496] schedtune: CPU[3] min_pwr: 1 max_pwr: 65
[ 0.152504] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 175
[ 0.152511] schedtune: CPU[4] min_pwr: 1 max_pwr: 65
[ 0.152518] schedtune: CPU[5] min_pwr: 1 max_pwr: 65
[ 0.152526] schedtune: CPU[6] min_pwr: 1 max_pwr: 65
[ 0.152534] schedtune: CPU[7] min_pwr: 1 max_pwr: 65
[ 0.152540] schedtune: SYSTEM min_pwr: 10 max_pwr: 875
[ 0.152547] schedtune: using normalization constants mul: 789479538 sh1: 1 sh2: 9
[ 0.152552] schedtune: verify normalization constants...
[ 0.152558] schedtune: max_pwr/2^0: 865 => norm_pwr: 1024
[ 0.152564] schedtune: max_pwr/2^1: 432 => norm_pwr: 511
[ 0.152570] schedtune: max_pwr/2^2: 216 => norm_pwr: 255
[ 0.152576] schedtune: max_pwr/2^3: 108 => norm_pwr: 127
[ 0.152582] schedtune: max_pwr/2^4: 54 => norm_pwr: 63
[ 0.152588] schedtune: max_pwr/2^5: 27 => norm_pwr: 31
[ 0.152594] schedtune: configured to support 5 boost groups
[ 0.154439] cpuidle: using governor menu
[ 0.155632] cpuidle: using governor qcom
[ 0.160411] vdso: 2 pages (1 code @ ffffff8009208000, 1 data @ ffffff800a004000)
[ 0.160433] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.161471] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.165919] pstore: using zlib compression
[ 0.166535] console [pstore-1] enabled
[ 0.166635] pstore: Registered ramoops as persistent store backend
[ 0.166645] ramoops: attached 0x80000@0x8ee00000, ecc: 0/0
[ 0.169175] smd_channel_probe_now: allocation table not initialized
[ 0.170083] smd_channel_probe_now: allocation table not initialized
[ 0.170555] smd_channel_probe_now: allocation table not initialized
[ 0.171267] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[ 0.171882] pm8953_s1: Bringing 1uV into 16-16uV
[ 0.172437] pm8953_s2_level: Bringing 1uV into 16-16uV
[ 0.172800] pm8953_s2_floor_level: Bringing 1uV into 16-16uV
[ 0.173708] pm8953_s2_level_ao: Bringing 1uV into 16-16uV
[ 0.175653] pm8953_s7_level_ao: Bringing 1uV into 16-16uV
[ 0.185910] qcom,gcc-8953 1800000.qcom,gcc: Venus speed bin: 2
[ 0.202960] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks
[ 0.203474] msm8953-pinctrl 1000000.pinctrl: invalid resource
[ 0.213704] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0
[ 0.220662] unable to find DT imem DLOAD mode node
[ 0.221900] unable to find DT imem EDLOAD mode node
[ 0.225155] sps:sps is ready.
[ 0.228423] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
[ 0.228526] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-pwrcl regulator!!!
[ 0.230183] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
[ 0.231360] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
[ 0.233597] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region@0
[ 0.234540] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 0.235361] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
[ 0.235594] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
[ 0.235818] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
[ 0.235998] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
[ 0.236833] apc_mem_acc_corner: Bringing 0uV into 1-1uV
[ 0.237675] gfx_mem_acc_corner: Bringing 0uV into 1-1uV
[ 0.238169] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV
[ 0.238180] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV
[ 0.238190] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV
[ 0.238204] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000
[ 0.238213] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000
[ 0.238222] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default
[ 0.238747] pm8953_s5_avs_limit: Bringing 0uV into 400000-400000uV
[ 0.238990] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us
[ 0.273414] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 0.273431] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
[ 0.273456] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[ 0.273988] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
[ 0.274031] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
[ 0.274042] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
[ 0.274065] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[ 0.275164] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
[ 0.275596] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
[ 0.278347] KPI: Bootloader start count = 44610
[ 0.278359] KPI: Bootloader end count = 309856
[ 0.278366] KPI: Bootloader display count = 3165012079
[ 0.278374] KPI: Bootloader load kernel count = 3004232331
[ 0.278382] KPI: Kernel MPM timestamp = 329130
[ 0.278388] KPI: Kernel MPM Clock frequency = 32768
[ 0.278411] socinfo_print: v0.10, id=293, ver=1.1, raw_id=70, raw_ver=1, hw_plat=8, hw_plat_ver=65536\x0a accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=3 serial_number=990285408
[ 0.280447] vio_disp: supplied by pm8953_l6
[ 0.282113] arm-smmu 1c40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk
[ 0.282570] arm-smmu 1e00000.qcom,iommu: \x09(IDR0.CTTW overridden by dma-coherent property)
[ 0.282585] arm-smmu 1e00000.qcom,iommu: \x09stream matching with 122 register groups, mask 0x7fff
[ 0.282692] arm-smmu 1e00000.qcom,iommu: found 32 context interrupt(s) but have 30 context banks. assuming 30 context interrupts.
[ 0.283516] iommu: Adding device soc:qcom,msm-audio-ion to group 0
[ 0.287802] SCSI subsystem initialized
[ 0.288018] usbcore: registered new interface driver usbfs
[ 0.288070] usbcore: registered new interface driver hub
[ 0.288321] usbcore: registered new device driver usb
[ 0.289479] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
[ 0.289506] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[ 0.289748] input: qpnp_pon as /devices/virtual/input/input0
[ 0.290701] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: No PON config. specified
[ 0.290761] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
[ 0.290784] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[ 0.291409] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[ 0.291483] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.291494] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.291736] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.292326] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[ 0.292386] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.292398] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.292530] i2c-msm-v2 78b7000.i2c: irq:70 when no active transfer
[ 0.292615] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.292844] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
[ 0.292892] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.292904] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[ 0.293124] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.293675] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
[ 0.293722] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.293732] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.293939] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.294349] media: Linux media interface: v0.10
[ 0.294393] Linux video capture interface: v2.00
[ 0.307345] EDAC MC: Ver: 3.0.0
[ 0.308844] Unable to get pmic_revid rc=-22
[ 0.308968] dmi: Firmware registration failed.
[ 0.310104] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
[ 0.310270] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
[ 0.310416] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
[ 0.310673] ION heap system created
[ 0.310936] ION heap mm created at 0x00000000f4800000 with size b400000
[ 0.310954] ION heap qsecom created at 0x00000000f3800000 with size 1000000
[ 0.310969] ION heap qsecom_ta created at 0x00000000f3400000 with size 400000
[ 0.312356] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.312366] ipa ipa_init:4016 fail to register with bus mgr!
[ 0.312460] ipa ipa_plat_drv_probe:5046 ipa_init failed
[ 0.313328] PMIC@SID0: PM8953 v1.0 options: 2, 2, 0, 0
[ 0.313484] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0
[ 0.315835] Advanced Linux Sound Architecture Driver Initialized.
[ 0.316411] Bluetooth: Core ver 2.22
[ 0.316445] NET: Registered protocol family 31
[ 0.316454] Bluetooth: HCI device and connection manager initialized
[ 0.316467] Bluetooth: HCI socket layer initialized
[ 0.316479] Bluetooth: L2CAP socket layer initialized
[ 0.317084] NetLabel: Initializing
[ 0.317093] NetLabel: domain hash size = 128
[ 0.317100] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.317154] NetLabel: unlabeled traffic allowed by default
[ 0.317664] gcc_oxili_gfx3d_clk: set OPP pair(19200000 Hz: 615000 uV) on 1c00000.qcom,kgsl-3d0
[ 0.318018] gcc_oxili_gfx3d_clk: set OPP pair(200000000 Hz: 675000 uV) on 1c00000.qcom,kgsl-3d0
[ 0.318466] gcc_oxili_gfx3d_clk: set OPP pair(650000000 Hz: 0 uV) on 1c00000.qcom,kgsl-3d0
[ 0.318805] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks.
[ 0.318903] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
[ 0.318995] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-pwrcl regulator!!!
[ 0.319517] cpr4_apss_read_fuse_data: apc_corner: speed bin = 2, CPR fusing revision = 3, foundry id = 2
[ 0.319529] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 0.319564] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 0.319661] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV
[ 0.319671] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV
[ 0.319680] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 775000 uV
[ 0.319688] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV
[ 0.319743] cpr4_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 557
[ 0.319754] cpr4_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 645, quot_offset[ 7]= 85
[ 0.319764] cpr4_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 837, quot_offset[ 7]= 190
[ 0.319774] cpr4_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1110, quot_offset[ 7]= 270
[ 0.319940] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = 11, aging RO scale = 2800 QUOT/V
[ 0.320124] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop
[ 0.321220] ibb_reg: Bringing 0uV into 4600000-4600000uV
[ 0.321637] lab_reg: Bringing 0uV into 4600000-4600000uV
[ 0.321864] qpnp_labibb_regulator_probe: LAB/IBB registered successfully, lab_vreg enable=1 ibb_vreg enable=1 swire_control=1
[ 0.322150] gdsc_oxili_gx: supplied by msm_gfx_ldo
[ 0.323314] arm-smmu 1c40000.arm,smmu-kgsl: \x09(IDR0.CTTW overridden by dma-coherent property)
[ 0.323330] arm-smmu 1c40000.arm,smmu-kgsl: \x09stream matching with 4 register groups, mask 0x7fff
[ 0.326961] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.326973] ipa ipa_init:4016 fail to register with bus mgr!
[ 0.327046] ipa ipa_plat_drv_probe:5046 ipa_init failed
[ 0.327144] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0
[ 0.328775] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0
[ 0.328789] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0
[ 0.328802] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0
[ 0.328812] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0
[ 0.328824] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0
[ 0.328834] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0
[ 0.328842] ramp_lmh_sid: Use Default LMH SID
[ 0.328849] ramp_dfs_sid: Use Default DFS SID
[ 0.328856] ramp_link_sid: Use Default Link SID
[ 0.328900] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1
[ 0.328910] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1
[ 0.328921] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1
[ 0.328931] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1
[ 0.328942] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1
[ 0.328953] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1
[ 0.328960] ramp_lmh_sid: Use Default LMH SID
[ 0.328966] ramp_dfs_sid: Use Default DFS SID
[ 0.328972] ramp_link_sid: Use Default Link SID
[ 0.329021] clock_rcgwr_init: RCGwR Init Completed
[ 0.332217] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7)
[ 0.332232] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1
[ 0.332239] print_opp_table: clock_cpu: a53 C0: OPP voltage for 2016000000: 7
[ 0.332247] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1
[ 0.332254] print_opp_table: clock_cpu: a53 C2: OPP voltage for 2016000000: 7
[ 0.332492] sched-energy energy-costs: cpu=0 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
[ 0.332502] CPU0: update cpu_capacity 932
[ 0.332515] sched-energy energy-costs: cpu=1 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
[ 0.332522] CPU1: update cpu_capacity 932
[ 0.332534] sched-energy energy-costs: cpu=2 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
[ 0.332542] CPU2: update cpu_capacity 932
[ 0.332554] sched-energy energy-costs: cpu=3 eff=1024 [freq=652800 cap=302 power_d0=5] -> [freq=2400000 cap=932 power_d0=65]
[ 0.332561] CPU3: update cpu_capacity 932
[ 0.332574] sched-energy energy-costs: cpu=4 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
[ 0.332581] CPU4: update cpu_capacity 1024
[ 0.332593] sched-energy energy-costs: cpu=5 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
[ 0.332600] CPU5: update cpu_capacity 1024
[ 0.332612] sched-energy energy-costs: cpu=6 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
[ 0.332620] CPU6: update cpu_capacity 1024
[ 0.332632] sched-energy energy-costs: cpu=7 eff=1126 [freq=652800 cap=332 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65]
[ 0.332639] CPU7: update cpu_capacity 1024
[ 0.333936] sched-energy energy-costs: Sched-energy-costs capacity updated
[ 0.336163] cpufreq: driver msm up and running
[ 0.336366] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.336370] ipa ipa_init:4016 fail to register with bus mgr!
[ 0.336410] ipa ipa_plat_drv_probe:5046 ipa_init failed
[ 0.337118] clocksource: Switched to clocksource arch_sys_counter
[ 0.340080] CPU5: update max cpu_capacity 1024
[ 0.363934] VFS: Disk quotas dquot_6.6.0
[ 0.363977] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.364023] msm_bus_fabric_init_driver
[ 0.367746] msm_bus_device 580000.ad-hoc-bus: Bus scaling driver probe successful
[ 0.368643] NET: Registered protocol family 2
[ 0.369021] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.369183] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.369549] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.369590] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.369636] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.369764] NET: Registered protocol family 1
[ 0.370358] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks.
[ 0.370947] ipa ipa2_uc_state_check:297 uC interface not initialized
[ 0.370957] ipa ipa_sps_irq_control_all:963 EP (2) not allocated.
[ 0.370962] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
[ 0.372246] sps:BAM 0x0000000007904000 is registered.
[ 0.372618] sps:BAM 0x0000000007904000 (va:0xffffff800abc0000) enabled: ver:0x27, number of pipes:20
[ 0.375339] IPA driver initialization was successful.
[ 0.375584] Trying to unpack rootfs image as initramfs...
[ 0.622048] Freeing initrd memory: 10216K
[ 0.623042] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.625568] audit: initializing netlink subsys (disabled)
[ 0.625602] audit: type=2000 audit(0.619:1): initialized
[ 0.625775] Initialise system trusted keyrings
[ 0.626035] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.629714] [SDFAT] Filesystem version 2.1.8
[ 0.629820] Registering sdcardfs 0.1
[ 0.629965] fuse init (API version 7.26)
[ 0.630347] SELinux: Registering netfilter hooks
[ 0.630498] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
[ 0.630502] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
[ 0.630507] pfk [pfk_init]: Driver initialized successfully
[ 0.633090] Key type asymmetric registered
[ 0.633095] Asymmetric key parser 'x509' registered
[ 0.633105] io scheduler noop registered
[ 0.633210] io scheduler cfq registered (default)
[ 0.639396] msm_mdss_get_res_byname: 'vbif_nrt_phys' resource not found
[ 0.639408] mdss_mdp_probe+0x1a4/0x1300->msm_mdss_ioremap_byname: 'vbif_nrt_phys' msm_mdss_get_res_byname failed
[ 0.639551] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
[ 0.639562] mdss_mdp_irq_clk_register: unable to get clk: mnoc_clk
[ 0.639832] No change in context(0==0), skip
[ 0.640507] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
[ 0.640521] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
[ 0.640525] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
[ 0.640538] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
[ 0.640549] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
[ 0.640557] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
[ 0.640633] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
[ 0.640640] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read
[ 0.640813] xlog_status: enable:1, panic:1, dump:2
[ 0.640993] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 1
[ 0.641119] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 2
[ 0.641262] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100
[ 0.642287] mdss_smmu_util_parse_dt_clock: clocks are not defined
[ 0.642295] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
[ 0.642309] mdss_smmu_util_parse_dt_clock: clocks are not defined
[ 0.642314] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
[ 0.642542] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.642551] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.642559] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.642888] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[ 0.642971] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_mot_smd_549_1080p_cmd_v0 panel_name:qcom,mdss_dsi_mot_smd_549_1080p_cmd_v0
[ 0.642980] mdss_dsi_panel_init: Panel Name = mipi_mot_cmd_smd_1080p_549
[ 0.643082] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_mot_smd_549_1080p_cmd_v0" (ffffffc08c2eb1d8)
[ 0.643095] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[ 0.643102] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[ 0.643105] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
[ 0.643178] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
[ 0.643184] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
[ 0.643197] mdss_dsi_parse_panel_features: partial_update_enabled=1
[ 0.643205] mdss_dsi_parse_panel_features: ulps feature disabled
[ 0.643211] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[ 0.643216] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[ 0.643260] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
[ 0.643266] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
[ 0.643290] mdss_panel_parse_param_prop: HBM feature enabled with 2 dt cmds
[ 0.643304] mdss_panel_parse_param_prop: ACL feature enabled with 2 dt cmds
[ 0.643319] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.643327] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.643334] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.643342] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.643465] mdss_dsi_parse_ctrl_params:4164 Unable to read qcom,display-id, data=0000000000000000,len=20
[ 0.643475] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
[ 0.643479] mdss_dsi_parse_gpio_params: ext vdd gpio not specified
[ 0.643512] msm_mdss_get_res_byname: 'dsi_phy_regulator' resource not found
[ 0.643522] mdss_dsi_retrieve_ctrl_resources+0xc8/0x230->msm_mdss_ioremap_byname: 'dsi_phy_regulator' msm_mdss_get_res_byname failed
[ 0.643527] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800aa85000 ctrl_size=400 phy_base=ffffff800aa87400 phy_size=580
[ 0.643609] dsi_panel_device_register: Continuous splash enabled
[ 0.643667] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
[ 0.644914] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2
[ 0.645082] mdss_dsi_status_init: DSI status check interval:5000
[ 0.645261] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
[ 0.645609] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
[ 0.645895] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
[ 0.646150] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
[ 0.646205] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
[ 0.646251] mdss_mdp_splash_parse_dt: splash mem child node is not present
[ 0.646358] qcom-sps-dma 7884000.qcom,sps-dma: dma_async_device_register: device has no channels!
[ 0.646404] qcom-sps-dma 7ac4000.qcom,sps-dma: dma_async_device_register: device has no channels!
[ 0.648342] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 0.648347] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 0.648352] memshare: hyp_assign_phys failed size=2097152 err=-5
[ 0.648375] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
[ 0.648509] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
[ 0.650115] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 0.650119] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 0.650123] memshare: hyp_assign_phys failed size=5242880 err=-5
[ 0.650130] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
[ 0.651246] minidump-id not found for a506_zap
[ 0.651257] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped.
[ 0.651561] minidump-id not found for adsp
[ 0.651635] minidump-id not found for wcnss
[ 0.651779] minidump-id not found for venus
[ 0.651789] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
[ 0.652477] minidump-id not found for modem
[ 0.653330] wcnss: wcnss_wlan probed in built-in mode
[ 0.653569] mmi_unit_info (SMEM) for modem: version = 0x03, device = 'kuntao', radio = 0x1, radio_str = '0x1', system_rev = 0x83b0, system_serial = 0x0000000000000000, machine = '', barcode = 'ZY223MMBQK', baseband = '', carrier = '', pu_reason = 0xffffffff
[ 0.653870] msm_serial_hs module loaded
[ 0.655066] random: fast init done
[ 0.655129] random: crng init done
[ 0.659359] diag: In __diag_glink_init, unable to register for glink channel DIAG_CTRL
[ 0.659492] diag: In __diag_glink_init, unable to register for glink channel DIAG_DATA
[ 0.659573] diag: In __diag_glink_init, unable to register for glink channel DIAG_CMD
[ 0.659651] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_DATA
[ 0.659730] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_CMD
[ 0.662217] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_user to group 3
[ 0.662375] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0
[ 0.662581] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_secure to group 4
[ 0.670339] brd: module loaded
[ 0.672978] loop: module loaded
[ 0.673255] zram: Added device: zram0
[ 0.674047] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
[ 0.674065] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[ 0.674071] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
[ 0.674076] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
[ 0.674231] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
[ 0.674440] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xc (ok)
[ 0.674557] bcm2079x-i2c 5-0076: bcm2079x_probe, probing bcm2079x driver flags = 0
[ 0.674579] nfc: dev-name=5-0076
[ 0.674585] nfc: succeed in obtaining nfc_clk from msm pmic
[ 0.674620] 5-0076 supply nfc_vddswp not found, using dummy regulator
[ 0.674679] bcm2079x-i2c 5-0076: requesting IRQ 287
[ 0.674740] bcm2079x-i2c 5-0076: bcm2079x_probe, probing bcm2079x driver exited successfully
[ 0.677187] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[ 0.677432] qce 720000.qcedev: QTI Crypto 5.3.3 device found @0x720000
[ 0.677439] qce 720000.qcedev: CE device = 0x0 IO base, CE = ffffff800b820000 Consumer (IN) PIPE 2,\x0aProducer (OUT) PIPE 3 IO base BAM = 0000000000000000\x0aBAM IRQ 65 Engines Availability = 0x2010853
[ 0.677564] sps:BAM 0x0000000000704000 is registered.
[ 0.677694] sps:BAM 0x0000000000704000 (va:0xffffff800bca0000) enabled: ver:0x27, number of pipes:8
[ 0.677840] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 65
[ 0.684152] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[ 0.684408] qcrypto 720000.qcrypto: QTI Crypto 5.3.3 device found @0x720000
[ 0.684415] qcrypto 720000.qcrypto: CE device = 0x0 IO base, CE = ffffff800bda0000 Consumer (IN) PIPE 4,\x0aProducer (OUT) PIPE 5 IO base BAM = 0000000000000000\x0aBAM IRQ 65 Engines Availability = 0x2010853
[ 0.684613] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 65
[ 0.688186] qcrypto 720000.qcrypto: qcrypto-ecb-aes
[ 0.688283] qcrypto 720000.qcrypto: qcrypto-cbc-aes
[ 0.688361] qcrypto 720000.qcrypto: qcrypto-ctr-aes
[ 0.688430] qcrypto 720000.qcrypto: qcrypto-ecb-des
[ 0.688502] qcrypto 720000.qcrypto: qcrypto-cbc-des
[ 0.688571] qcrypto 720000.qcrypto: qcrypto-ecb-3des
[ 0.688641] qcrypto 720000.qcrypto: qcrypto-cbc-3des
[ 0.688711] qcrypto 720000.qcrypto: qcrypto-xts-aes
[ 0.688780] qcrypto 720000.qcrypto: qcrypto-sha1
[ 0.688851] qcrypto 720000.qcrypto: qcrypto-sha256
[ 0.688920] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[ 0.688989] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[ 0.689058] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[ 0.689127] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[ 0.689197] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[ 0.689266] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[ 0.689338] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
[ 0.689408] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
[ 0.689478] qcrypto 720000.qcrypto: qcrypto-aes-ccm
[ 0.689547] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
[ 0.689950] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
[ 0.689995] ICE IRQ = 75
[ 0.690419] SCSI Media Changer driver v0.25
[ 0.691272] libphy: Fixed MDIO Bus: probed
[ 0.691276] tun: Universal TUN/TAP device driver, 1.6
[ 0.691280] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.691315] PPP generic driver version 2.4.2
[ 0.691355] PPP BSD Compression module registered
[ 0.691359] PPP Deflate Compression module registered
[ 0.691368] PPP MPPE Compression module registered
[ 0.691373] NET: Registered protocol family 24
[ 0.691484] usbcore: registered new interface driver asix
[ 0.691527] usbcore: registered new interface driver ax88179_178a
[ 0.691546] usbcore: registered new interface driver cdc_ether
[ 0.691564] usbcore: registered new interface driver net1080
[ 0.691582] usbcore: registered new interface driver cdc_subset
[ 0.691600] usbcore: registered new interface driver zaurus
[ 0.691625] usbcore: registered new interface driver cdc_ncm
[ 0.691629] CHRDEV "uio" major number 233 goes below the dynamic allocation range
[ 0.691940] msm_sharedmem: sharedmem_register_qmi: qmi init successful
[ 0.692481] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 0.692486] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 0.692493] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f2f00000 size=1572864 err=-5
[ 0.692545] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[ 0.694631] msm-dwc3 7000000.ssusb: unable to get dbm device
[ 0.695117] CHRDEV "usbmon" major number 232 goes below the dynamic allocation range
[ 0.695161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.695165] ehci-platform: EHCI generic platform driver
[ 0.695400] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 0.695982] usbcore: registered new interface driver cdc_acm
[ 0.695985] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.696010] usbcore: registered new interface driver usb-storage
[ 0.696027] usbcore: registered new interface driver ums-alauda
[ 0.696045] usbcore: registered new interface driver ums-cypress
[ 0.696062] usbcore: registered new interface driver ums-datafab
[ 0.696079] usbcore: registered new interface driver ums-freecom
[ 0.696096] usbcore: registered new interface driver ums-isd200
[ 0.696112] usbcore: registered new interface driver ums-jumpshot
[ 0.696129] usbcore: registered new interface driver ums-karma
[ 0.696146] usbcore: registered new interface driver ums-onetouch
[ 0.696162] usbcore: registered new interface driver ums-sddr09
[ 0.696179] usbcore: registered new interface driver ums-sddr55
[ 0.696197] usbcore: registered new interface driver ums-usbat
[ 0.696235] usbcore: registered new interface driver usbserial
[ 0.696255] usbcore: registered new interface driver usb_ehset_test
[ 0.696273] usbcore: registered new interface driver lvs
[ 0.696296] CHRDEV "ttyGS" major number 231 goes below the dynamic allocation range
[ 0.697033] CHRDEV "rmnet_ctrl" major number 230 goes below the dynamic allocation range
[ 0.697317] mousedev: PS/2 mouse device common for all mice
[ 0.697535] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0xf (ok)
[ 0.697724] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-wakeup[4]
[ 0.697736] synaptics_dsx_i2c 3-0020: processed 1 patch sets for 1 functions
[ 0.697743] synaptics_dsx_i2c 3-0020: processed 1 patch sets for 1 functions
[ 0.697748] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-aod[0]
[ 0.697850] synaptics_dsx_i2c 3-0020: no valid patch sets found
[ 0.697855] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-charger[3]
[ 0.697859] synaptics_dsx_dt_parse_modifiers: using charger detection
[ 0.697865] synaptics_dsx_i2c 3-0020: processed 1 patch sets for 1 functions
[ 0.697888] synaptics_dsx_of_init: using gpio config
[ 0.697893] synaptics_dsx_of_init: using single touch in aod
[ 0.697906] synaptics_dsx_gpio_config: [wj]request irq touch_irq [65]
[ 0.697909] synaptics_dsx_gpio_config: [wj]request reset touch_reset [64]
[ 0.710088] 3-0020 supply touch_vdd not found, using dummy regulator
[ 0.710121] 3-0020 supply vdd_quirk not found, using dummy regulator
[ 0.741908] synaptics_dsx_i2c 3-0020: synaptics_rmi4_cap_button_map: cap_button_map is \x09\x09\x09\x09NULL in board file
[ 0.743480] synaptics_dsx_i2c 3-0020: synaptics_rmi4_query_device: No handler for F51
[ 0.747085] input: synaptics_dsx_i2c as /devices/platform/soc/78b7000.i2c/i2c-3/3-0020/input/input1
[ 0.747123] synaptics_rmi4_query_device: Product: s3508sga, firmware id: 255439, config id: 16082202
[ 0.747947] synaptics_dsx_sensor_state: state change UNKNOWN -> STANDBY
[ 0.747953] synaptics_dsx_sysfs_touchscreen: assigned minor 32
[ 0.748054] CHRDEV "rmi" major number 229 goes below the dynamic allocation range
[ 0.748140] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0x10 (ok)
[ 0.748228] alsps_epl8802elan sensor probe enter.
[ 0.748301] EPL8802 4-0049: sensor_power_init success
[ 0.756960] synaptics_dsx_i2c 3-0020: RxTx mapped from F$55\x0a\x0a\x09Rx mapped count 28(32)\x0a\x09Tx \x09\x09\x09\x09mapped count 16(22)\x0a
[ 0.757494] statistics_start_timekeeping: F51 data: invalid offset
[ 0.757498] statistics_init: statistics init failed
[ 0.758041] synaptics_dsx_i2c 3-0020: fwu_scan_pdt: BL version = 6
[ 0.830048] epl8802 ldo delay 80ms
[ 0.832289] alsps_epl8802set_psensor_intr_threshold: low_thd = 2000, high_thd = 2300
[ 0.832354] input: light as /devices/virtual/input/input2
[ 0.832472] input: proximity as /devices/virtual/input/input3
[ 0.850305] alsps_epl8802sensor probe success.
[ 0.850766] vfsspi_probe: enter
[ 0.850827] CHRDEV "validity_fingerprint" major number 228 goes below the dynamic allocation range
[ 0.861444] vfsspi_send_drdy_signal: pid not received yet
[ 0.871872] vfsspi_probe: vfsspi_probe successful
[ 0.872264] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: rtc core: registered qpnp_rtc as rtc0
[ 0.872428] i2c /dev entries driver
[ 0.874836] iommu: Adding device 1d00000.qcom,vidc:non_secure_cb to group 5
[ 0.875201] iommu: Adding device 1d00000.qcom,vidc:secure_bitstream_cb to group 6
[ 0.875484] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 0.875489] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 0.875554] iommu: Adding device 1d00000.qcom,vidc:secure_pixel_cb to group 7
[ 0.875776] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 0.875780] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 0.875843] iommu: Adding device 1d00000.qcom,vidc:secure_non_pixel_cb to group 8
[ 0.876060] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 0.876064] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 0.877283] vfsspi_send_drdy_signal: pid not received yet
[ 0.879675] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 9
[ 0.879762] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [0] = 1024\x0a,
[ 0.879767] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [1] = 10240\x0a,
[ 0.879821] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 10
[ 0.879900] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :cpp sid [0] = 7168\x0a,
[ 0.879951] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 11
[ 0.880054] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :jpeg_enc0 sid [0] = 6144\x0a,
[ 0.880946] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 0.881885] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 0.882021] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 0.882120] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 0.882394] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 0.882514] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 0.882628] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 0.882890] msm_actuator_platform_probe:1987 msm_actuator_platform_probe: No/Error Actuator GPIOs
[ 0.883217] msm_eeprom_platform_probe failed 1780
[ 0.883409] msm_eeprom_platform_probe failed 1780
[ 0.887794] MSM-CPP cpp_init_hardware:1133 CPP HW Version: 0x40030003
[ 0.887800] MSM-CPP cpp_init_hardware:1151 stream_cnt:0
[ 0.887877] MSM-CPP cpp_release_hardware:1214 cpp hw release done
[ 0.888823] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found
[ 0.888828] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found
[ 0.888905] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk
[ 0.889668] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found
[ 0.889673] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found
[ 0.889736] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk
[ 0.890480] __msm_jpeg_init:1551] Jpeg Device id 0
[ 0.890592] CHRDEV "jpeg0" major number 227 goes below the dynamic allocation range
[ 0.891293] FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=aa
[ 0.892539] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17
[ 0.894246] smb1351_parallel_charger_probe: smb1351 parallel successfully probed.
[ 0.901179] FG: get_prop_capacity: bat profile not ready, using shutdown soc 93
[ 0.901442] create_debugfs_entries: Couldn't create debug dir
[ 0.901447] smb1351_main_charger_probe: smb1351 successfully probed. charger=1, batt=1 version=SMB1350
[ 0.901899] FG: get_prop_capacity: using pre shutdown soc 93
[ 0.902796] TYPEC: qpnp_typec_probe: TypeC successfully probed state=0 CC-line-state=2
[ 0.903812] thermal thermal_zone1: failed to read out thermal zone (-517)
[ 0.904038] thermal thermal_zone18: failed to read out thermal zone (-517)
[ 0.904324] qpnp_vadc_read: error enabling the charger circuitry vote
[ 0.904328] qpnp_vadc_get_temp: VADC read error with -22
[ 0.904333] thermal thermal_zone46: failed to read out thermal zone (-22)
[ 0.904410] qpnp_vadc_init_thermal: thermal device register failed.
[ 0.904414] qpnp_vadc_init_thermal: Init HWMON failed for qpnp_adc with -19
[ 0.904418] qcom,qpnp-vadc 200f000.qcom,spmi:qcom,pmi8950@2:vadc@3100: failed to initialize qpnp thermal adc
[ 0.925446] device-mapper: uevent: version 1.0.3
[ 0.925563] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 0.925695] device-mapper: req-crypt: dm-req-crypt successfully initalized.\x0a
[ 0.926062] CHRDEV "bt" major number 226 goes below the dynamic allocation range
[ 0.926135] sdhci: Secure Digital Host Controller Interface driver
[ 0.926138] sdhci: Copyright(c) Pierre Ossman
[ 0.926141] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.927246] sdhci_msm 7824900.sdhci: failed opening nvmem cell err : -2
[ 0.927258] qcom_ice_get_pdevice: found ice device ffffffc0e9915000
[ 0.927261] qcom_ice_get_pdevice: matching platform device ffffffc0ec065000
[ 0.927451] haptics: qpnp_haptics_parse_dt: Invalid length for brake pattern
[ 0.927457] qcom,qpnp-haptics 200f000.qcom,spmi:qcom,pmi8950@3:qcom,haptics@c000: Error in parsing DT parameters, rc=-22
[ 0.927466] qcom,qpnp-haptics: probe of 200f000.qcom,spmi:qcom,pmi8950@3:qcom,haptics@c000 failed with error -22
[ 0.928537] usbcore: registered new interface driver usbhid
[ 0.928540] usbhid: USB HID core driver
[ 0.928645] ashmem: initialized
[ 0.928792] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
[ 0.930388] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff800b9e8000
[ 0.930989] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
[ 1.004687] mmc0: Out-of-interrupt timeout is 50[ms]
[ 1.004693] mmc0: eMMC FW version: 0x07
[ 1.004696] mmc0: CMDQ supported: depth: 16
[ 1.004700] mmc0: cache barrier support 0 flush policy 0
[ 1.016230] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 63488 slot-sz: 24
[ 1.016336] mmc0: CMDQ enabled on card
[ 1.016345] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[ 1.016755] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1
[ 1.016761] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1
[ 1.016827] mmcblk0: mmc0:0001 RC14MB 58.2 GiB
[ 1.017001] mmcblk0rpmb: mmc0:0001 RC14MB partition 3 4.00 MiB
[ 1.018299] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56
[ 1.022346] sdhci_msm 7864900.sdhci: failed opening nvmem cell err : -2
[ 1.022356] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
[ 1.036549] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
[ 1.066253] tz_log 8600720.tz-log: Hyp log service is not supported
[ 1.066626] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[ 1.069051] st-lsm6ds3-i2c 4-006a: sensor_power_init success
[ 1.069057] st-lsm6ds3-i2c 4-006a: sensor_power_set on=1
[ 1.102729] FG: get_prop_capacity: using pre shutdown soc 93
[ 1.216414] FG: get_prop_capacity: using pre shutdown soc 93
[ 1.270056] st-lsm6ds3-i2c 4-006a: st_lsm6ds3_common_probe power control success
[ 1.270060] lsm6ds3 msensor_gpio_init data->msensor_gpio = 44
[ 1.270063] lsm6ds3 msensor_gpio_init gpio_is_valid ok1
[ 1.270072] lsm6ds3 msensor_gpio_init gpio_request return=0
[ 1.270077] lsm6ds3 msensor_gpio_init gpio_direction_output ok 1 return=0
[ 1.270134] msensor_gpio_init:pinctrl adopt active state\x0d
[ 1.270275] st-lsm6ds3-i2c 4-006a: driver use DRDY int pin 1.
[ 1.792341] coresight-tmc 6028000.tmc: failed to get flush cti
[ 1.792346] coresight-tmc 6028000.tmc: failed to get reset cti
[ 1.792352] coresight-tmc 6028000.tmc: failed to get csr, defer probe
[ 1.792500] coresight-tmc 6027000.tmc: failed to get flush cti
[ 1.792504] coresight-tmc 6027000.tmc: failed to get reset cti
[ 1.792509] coresight-tmc 6027000.tmc: failed to get csr, defer probe
[ 1.793802] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized
[ 1.793907] coresight-stm 6002000.stm: stm_register_device failed, probing deffered
[ 1.794316] OF: graph: no port node found in /soc/cti@6010000
[ 1.794395] OF: graph: no port node found in /soc/cti@6011000
[ 1.794474] OF: graph: no port node found in /soc/cti@6012000
[ 1.794550] OF: graph: no port node found in /soc/cti@6013000
[ 1.794625] OF: graph: no port node found in /soc/cti@6014000
[ 1.794697] OF: graph: no port node found in /soc/cti@6015000
[ 1.794772] OF: graph: no port node found in /soc/cti@6016000
[ 1.794846] OF: graph: no port node found in /soc/cti@6017000
[ 1.794921] OF: graph: no port node found in /soc/cti@6018000
[ 1.794994] OF: graph: no port node found in /soc/cti@6019000
[ 1.795068] OF: graph: no port node found in /soc/cti@601a000
[ 1.795145] OF: graph: no port node found in /soc/cti@601b000
[ 1.795220] OF: graph: no port node found in /soc/cti@601c000
[ 1.795297] OF: graph: no port node found in /soc/cti@601d000
[ 1.795371] OF: graph: no port node found in /soc/cti@601e000
[ 1.795448] OF: graph: no port node found in /soc/cti@601f000
[ 1.795524] OF: graph: no port node found in /soc/cti@6198000
[ 1.795608] OF: graph: no port node found in /soc/cti@6199000
[ 1.795690] OF: graph: no port node found in /soc/cti@619a000
[ 1.795770] OF: graph: no port node found in /soc/cti@619b000
[ 1.795856] OF: graph: no port node found in /soc/cti@61b8000
[ 1.795942] OF: graph: no port node found in /soc/cti@61b9000
[ 1.796033] OF: graph: no port node found in /soc/cti@61ba000
[ 1.796127] OF: graph: no port node found in /soc/cti@61bb000
[ 1.796222] OF: graph: no port node found in /soc/cti@6128000
[ 1.796300] OF: graph: no port node found in /soc/cti@6124000
[ 1.796377] OF: graph: no port node found in /soc/cti@6134000
[ 1.796462] OF: graph: no port node found in /soc/cti@6139000
[ 1.796540] OF: graph: no port node found in /soc/cti@613c000
[ 1.796619] OF: graph: no port node found in /soc/cti@610c000
[ 1.796805] OF: graph: no port node found in /soc/csr@6001000
[ 1.796846] coresight-csr 6001000.csr: CSR initialized: coresight-csr
[ 1.797152] OF: graph: no port node found in /soc/hwevent@6101000
[ 1.797196] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
[ 1.797583] CHRDEV "sensors" major number 225 goes below the dynamic allocation range
[ 1.797781] usbcore: registered new interface driver snd-usb-audio
[ 1.798212] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.799686] msm8953-pinctrl 1000000.pinctrl: pin GPIO_95 already requested by soc:wsa881x_analog_vi_pctrl; cannot claim for soc:wsa881x_analog_reset_pctrl
[ 1.799692] msm8953-pinctrl 1000000.pinctrl: pin-95 (soc:wsa881x_analog_reset_pctrl) status -22
[ 1.799697] msm8953-pinctrl 1000000.pinctrl: could not request pin 95 (GPIO_95) from group gpio95 on device 1000000.pinctrl
[ 1.799702] msm-cdc-pinctrl soc:wsa881x_analog_reset_pctrl: Error applying setting, reverse things back
[ 1.799707] msm-cdc-pinctrl soc:wsa881x_analog_reset_pctrl: msm_cdc_pinctrl_probe: set cdc gpio sleep state fail: -22
[ 1.800502] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x1b (ok)
[ 1.800564] wsa881x-i2c-codec 2-000f: No cache used with register defaults set!
[ 1.800621] msm8953-pinctrl 1000000.pinctrl: pin GPIO_95 already requested by soc:wsa881x_analog_vi_pctrl; cannot claim for soc:wsa881x_analog_reset_pctrl
[ 1.800626] msm8953-pinctrl 1000000.pinctrl: pin-95 (soc:wsa881x_analog_reset_pctrl) status -22
[ 1.800632] msm8953-pinctrl 1000000.pinctrl: could not request pin 95 (GPIO_95) from group gpio95 on device 1000000.pinctrl
[ 1.800636] msm-cdc-pinctrl soc:wsa881x_analog_reset_pctrl: Error applying setting, reverse things back
[ 1.800640] wsa881x_reset: gpio set cannot be activated wsa_reset
[ 1.800645] wsa881x-i2c-codec 2-000f: wsa881x_i2c_probe: WSA enable Failed -22
[ 1.800714] tas2555 2-004c: tas2555_i2c_probe enter
[ 1.800724] tas2555 2-004c: tas2555_i2c_probe, reset gpio is (94)
[ 1.841326] tas2555 2-004c: TAS2555 PGID: 0xd0
[ 1.843254] tas2555 2-004c: tas2555_register_misc, leave
[ 1.843258] TiLoad DRIVER : tiload_driver_init
[ 1.843261] allocating dynamic major number
[ 1.843266] CHRDEV "tiload_node" major number 224 goes below the dynamic allocation range
[ 1.843276] allocated Major Number: 224
[ 1.843307] Registered TiLoad driver, Major number: 224
[ 1.851233] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx group_id: 0x9100
[ 1.851390] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0 dev_id: 0x9000
[ 1.851399] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.851420] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx group_id: 0x9101
[ 1.851567] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0 dev_id: 0x9001
[ 1.851577] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.851596] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx group_id: 0x9110
[ 1.851738] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0 dev_id: 0x9010
[ 1.851747] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.851767] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
[ 1.851910] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
[ 1.851920] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.851939] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
[ 1.852082] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
[ 1.852091] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.852111] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
[ 1.852253] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
[ 1.852262] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.852282] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
[ 1.852422] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
[ 1.852431] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.852451] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
[ 1.852593] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
[ 1.852602] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.852625] msm-dai-tdm soc:qcom,msm-dai-tdm-quin-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quin-rx group_id: 0x9140
[ 1.852765] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0 dev_id: 0x9040
[ 1.852774] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.852794] msm-dai-tdm soc:qcom,msm-dai-tdm-quin-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quin-tx group_id: 0x9141
[ 1.852937] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0 dev_id: 0x9041
[ 1.852946] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.855643] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
[ 1.855651] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node
[ 1.855662] msm8952-asoc-wcd c051000.sound: is_ext_spk_gpio_support: missing qcom,msm-spk-ext-pa in dt node
[ 1.855672] msm8952-asoc-wcd c051000.sound: Headset is using external micbias
[ 1.856090] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
[ 1.856096] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
[ 1.857900] CHRDEV "avtimer" major number 223 goes below the dynamic allocation range
[ 1.858196] audio_notifier_init: PDR register failed, ret = -19, disable service
[ 1.858498] audio_notifer_reg_service: service SSR_ADSP is in use
[ 1.858503] audio_notifer_reg_service: service SSR_MODEM is in use
[ 1.859446] u32 classifier
[ 1.859449] Actions configured
[ 1.859456] Netfilter messages via NETLINK v0.30.
[ 1.859587] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.859720] ctnetlink v0.93: registering with nfnetlink.
[ 1.859952] xt_time: kernel timezone is -0000
[ 1.860004] IPv4 over IPsec tunneling driver
[ 1.860309] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.860418] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 1.860459] Initializing XFRM netlink socket
[ 1.860635] NET: Registered protocol family 10
[ 1.861225] mip6: Mobile IPv6
[ 1.861237] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.861548] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.861956] NET: Registered protocol family 17
[ 1.861968] NET: Registered protocol family 15
[ 1.861984] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.861988] Ebtables v2.0 registered
[ 1.862057] l2tp_core: L2TP core driver, V2.0
[ 1.862065] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.862068] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 1.862078] l2tp_netlink: L2TP netlink interface
[ 1.862098] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 1.862102] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 1.862171] sctp: Hash tables configured (bind 256/256)
[ 1.862879] NET: Registered protocol family 27
[ 1.863046] spmi spmi-0: error: impermissible write to peripheral sid:0 addr:0xc441
[ 1.863053] qcom-spmi-gpio 200f000.qcom,spmi:qcom,pm8953@0:gpios: write 0x41 failed
[ 1.863061] adv_vreg: Failed to request enable GPIO1277: -19
[ 1.863065] reg-fixed-voltage soc:adv_vreg: Failed to register regulator: -19
[ 1.865246] minidump-id not found for adsp
[ 1.865765] minidump-id not found for wcnss
[ 1.865849] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
[ 1.866231] minidump-id not found for modem
[ 1.866449] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
[ 1.866486] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
[ 1.869252] sps:BAM 0x0000000007104000 is registered.
[ 1.869619] msm-dwc3 7000000.ssusb: charger detection in progress
[ 1.869734] CHRDEV "byte-cntr" major number 222 goes below the dynamic allocation range
[ 1.869889] sps:BAM 0x0000000006044000 is registered.
[ 1.870357] CHRDEV "6002000.stm" major number 221 goes below the dynamic allocation range
[ 1.870463] coresight-stm 6002000.stm: STM32 initialized
[ 1.870648] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.871086] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
[ 1.871093] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node
[ 1.871105] msm8952-asoc-wcd c051000.sound: is_ext_spk_gpio_support: missing qcom,msm-spk-ext-pa in dt node
[ 1.871115] msm8952-asoc-wcd c051000.sound: Headset is using external micbias
[ 1.871553] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
[ 1.871560] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
[ 1.872328] Registered cp15_barrier emulation handler
[ 1.872347] Registered setend emulation handler
[ 1.872534] registered taskstats version 1
[ 1.872545] Loading compiled-in X.509 certificates
[ 1.874607] Loaded X.509 cert 'Build time autogenerated kernel key: 50d812c5092c8596aae9530b73236946d52e4162'
[ 1.875798] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully
[ 1.879795] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb to group 12
[ 1.880732] CHRDEV "adsprpc-smd" major number 220 goes below the dynamic allocation range
[ 1.881003] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.881418] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
[ 1.881425] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node
[ 1.881437] msm8952-asoc-wcd c051000.sound: is_ext_spk_gpio_support: missing qcom,msm-spk-ext-pa in dt node
[ 1.881446] msm8952-asoc-wcd c051000.sound: Headset is using external micbias
[ 1.881889] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
[ 1.881895] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
[ 1.883119] input: soc:gpio_keys as /devices/platform/soc/soc:gpio_keys/input/input4
[ 1.883301] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.883687] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
[ 1.883694] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node
[ 1.883703] msm8952-asoc-wcd c051000.sound: is_ext_spk_gpio_support: missing qcom,msm-spk-ext-pa in dt node
[ 1.883712] msm8952-asoc-wcd c051000.sound: Headset is using external micbias
[ 1.884092] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
[ 1.884098] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
[ 1.884369] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: setting system clock to 1973-10-24 09:24:18 UTC (120302658)
[ 1.885394] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.885795] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
[ 1.885802] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node
[ 1.885812] msm8952-asoc-wcd c051000.sound: is_ext_spk_gpio_support: missing qcom,msm-spk-ext-pa in dt node
[ 1.885822] msm8952-asoc-wcd c051000.sound: Headset is using external micbias
[ 1.886216] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
[ 1.886223] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
[ 1.886799] lpm_levels_of: idx 1 276
[ 1.886805] lpm_levels_of: Residency < 0 for LPM
[ 1.886884] lpm_levels_of: idx 1 286
[ 1.886889] lpm_levels_of: Residency < 0 for LPM
[ 1.887094] lpm_levels: register_cluster_lpm_stats()
[ 1.887224] lpm_levels: register_cluster_lpm_stats()
[ 1.888041] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.888443] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
[ 1.888450] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node
[ 1.888461] msm8952-asoc-wcd c051000.sound: is_ext_spk_gpio_support: missing qcom,msm-spk-ext-pa in dt node
[ 1.888470] msm8952-asoc-wcd c051000.sound: Headset is using external micbias
[ 1.888868] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
[ 1.888875] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
[ 1.890537] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.890934] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
[ 1.890941] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node
[ 1.890952] msm8952-asoc-wcd c051000.sound: is_ext_spk_gpio_support: missing qcom,msm-spk-ext-pa in dt node
[ 1.890961] msm8952-asoc-wcd c051000.sound: Headset is using external micbias
[ 1.891348] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
[ 1.891355] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
[ 1.892855] rmnet_ipa started initialization
[ 1.892860] IPA SSR support = True
[ 1.892863] IPA ipa-loaduC = True
[ 1.892866] IPA SG support = True
[ 1.892869] IPA Napi Enable = False
[ 1.892872] using default for wan-rx-desc-size = 1024
[ 1.894104] CHRDEV "wwan_ioctl" major number 219 goes below the dynamic allocation range
[ 1.894591] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
[ 1.894598] ipa ipa2_uc_state_check:302 uC is not loaded
[ 1.895555] rmnet_ipa completed initialization
[ 1.895751] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8953@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.896183] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
[ 1.896190] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node
[ 1.896201] msm8952-asoc-wcd c051000.sound: is_ext_spk_gpio_support: missing qcom,msm-spk-ext-pa in dt node
[ 1.896212] msm8952-asoc-wcd c051000.sound: Headset is using external micbias
[ 1.896645] msm8952-asoc-wcd c051000.sound: ASoC: platform /soc/qcom,msm-pcm-voice not registered
[ 1.896651] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
[ 1.897110] RNDIS_IPA module is loaded.
[ 1.897122] clock_late_init: Removing enables held for handed-off clocks
[ 1.901564] apc_mem_acc_corner: disabling
[ 1.901568] gfx_mem_acc_corner: disabling
[ 1.901596] ALSA device list:
[ 1.901599] No soundcards found.
[ 1.901637] Warning: unable to open an initial console.
[ 1.903063] Freeing unused kernel memory: 6144K
[ 1.904893] init: init first stage started!
[ 1.904911] init: First stage mount skipped (recovery mode)
[ 1.905079] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 1.905131] init: Skipped setting INIT_AVB_VERSION (not vbmeta compatible)
[ 1.905146] init: Loading SELinux policy
[ 1.908836] SELinux: 8192 avtab hash slots, 25751 rules.
[ 1.916964] SELinux: 8192 avtab hash slots, 25751 rules.
[ 1.916979] SELinux: 1 users, 2 roles, 1939 types, 0 bools, 1 sens, 1024 cats
[ 1.916983] SELinux: 92 classes, 25751 rules
[ 1.919774] SELinux: Class bpf not defined in policy.
[ 1.919781] SELinux: the above unknown classes and permissions will be denied
[ 1.919798] SELinux: Completing initialization.
[ 1.919799] SELinux: Setting up existing superblocks.
[ 2.013772] audit: type=1403 audit(120302658.619:2): policy loaded auid=4294967295 ses=4294967295
[ 2.014014] selinux: SELinux: Loaded policy from /sepolicy\x0a
[ 2.018084] selinux: SELinux: Loaded file_contexts\x0a
[ 2.019509] init: init second stage started!
[ 2.024891] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.028682] selinux: SELinux: Loaded file_contexts\x0a
[ 2.029486] selinux: SELinux: Loaded property_contexts from /plat_property_contexts & /nonplat_property_contexts.\x0a
[ 2.029502] init: Running restorecon...
[ 2.035040] selinux: SELinux: Could not stat /dev/block: No such file or directory.\x0a
[ 2.035394] init: waitid failed: No child processes
[ 2.035431] init: Couldn't load property file: Unable to open '/system/etc/prop.default': No such file or directory: No such file or directory
[ 2.036108] init: property_set("ro.product.first_api_level", "23") failed: property already set
[ 2.036643] init: Couldn't load property file: Unable to open '/odm/default.prop': No such file or directory: No such file or directory
[ 2.038043] audit: type=1400 audit(120302658.639:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
[ 2.038537] audit: type=1400 audit(120302658.639:4): avc: denied { create } for pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 2.038562] audit: type=1400 audit(120302658.639:5): avc: denied { write } for pid=1 comm="init" path="/acct/uid_0/pid_372/cgroup.procs" dev="rootfs" ino=16197 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 2.040315] ueventd: ueventd started!
[ 2.040358] ueventd: Parsing file /ueventd.rc...
[ 2.040855] ueventd: Parsing file /vendor/ueventd.rc...
[ 2.040876] ueventd: Unable to open '/vendor/ueventd.rc': No such file or directory
[ 2.040891] ueventd: Parsing file /odm/ueventd.rc...
[ 2.040911] ueventd: Unable to open '/odm/ueventd.rc': No such file or directory
[ 2.040963] ueventd: Parsing file /ueventd.qcom.rc...
[ 2.040981] ueventd: Unable to open '/ueventd.qcom.rc': No such file or directory
[ 2.044358] selinux: SELinux: Loaded file_contexts\x0a
[ 2.060998] FG: get_prop_capacity: using pre shutdown soc 93
[ 2.084587] FG: get_prop_capacity: using pre shutdown soc 93
[ 2.116624] ueventd: firmware: loading 'tas2555_uCDSP.bin' for '/devices/platform/soc/78b6000.i2c/i2c-2/2-004c/firmware/tas2555_uCDSP.bin'
[ 2.174174] FG: get_prop_capacity: using pre shutdown soc 93
[ 2.339618] FG: get_prop_capacity: using pre shutdown soc 93
[ 2.453127] FG: get_prop_capacity: using pre shutdown soc 93
[ 2.486852] FG: get_prop_capacity: using pre shutdown soc 93
[ 2.486880] FG: get_prop_capacity: using pre shutdown soc 93
[ 3.411566] FG: get_prop_capacity: using pre shutdown soc 93
[ 3.520155] of_batterydata_get_best_profile: 2380449_lenovo_5000mah_averaged_masterslave_apr11th2016 found
[ 3.530810] FG: fg_batt_profile_init: Battery SOC: 99, V: 4244817uV
[ 3.680795] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[ 3.680811] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[ 3.940646] Mass Storage Function, version: 2009/09/11
[ 3.940660] LUN: removable file: (no medium)
[ 3.943876] file system registered
[ 3.944588] CHRDEV "msm_usb_bridge" major number 218 goes below the dynamic allocation range
[ 3.956365] audit: type=1400 audit(120302660.559:6): avc: denied { write } for pid=391 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
[ 3.956954] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
[ 3.957969] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
[ 3.960655] CHRDEV "usb_rndis" major number 217 goes below the dynamic allocation range
[ 3.964369] audit: type=1400 audit(120302660.569:7): avc: denied { add_name } for pid=1 comm="init" name="enable" scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 3.964401] audit: type=1400 audit(120302660.569:8): avc: denied { create } for pid=1 comm="init" name="enable" scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 3.964931] audit: type=1400 audit(120302660.569:9): avc: denied { create } for pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 3.964959] audit: type=1400 audit(120302660.569:10): avc: denied { write } for pid=1 comm="init" path="/acct/uid_0/pid_398/cgroup.procs" dev="rootfs" ino=16339 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 3.970865] read descriptors
[ 3.970952] read strings
[ 4.019235] tas2555 2-004c: tas2555_fw_ready:
[ 4.019238] tas2555 2-004c: tas2555_uCDSP.bin firmware is not loaded.
[ 4.388070] synaptics_dsx_sensor_state: state change STANDBY -> ACTIVE
[ 4.521636] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts:
[ 4.521757] SELinux: Context u:object_r:mnt_vendor_file:s0 is not valid (left unmapped).
[ 4.601321] F2FS-fs (mmcblk0p56): Magic Mismatch, valid(0xf2f52010) - read(0x6c37df02)
[ 4.601358] F2FS-fs (mmcblk0p56): Can't find valid F2FS filesystem in 1th superblock
[ 4.601509] F2FS-fs (mmcblk0p56): Magic Mismatch, valid(0xf2f52010) - read(0x9a5d0b65)
[ 4.601514] F2FS-fs (mmcblk0p56): Can't find valid F2FS filesystem in 2th superblock
[ 4.601528] F2FS-fs (mmcblk0p56): Magic Mismatch, valid(0xf2f52010) - read(0x6c37df02)
[ 4.601532] F2FS-fs (mmcblk0p56): Can't find valid F2FS filesystem in 1th superblock
[ 4.601537] F2FS-fs (mmcblk0p56): Magic Mismatch, valid(0xf2f52010) - read(0x9a5d0b65)
[ 4.601542] F2FS-fs (mmcblk0p56): Can't find valid F2FS filesystem in 2th superblock
[ 4.601750] F2FS-fs (mmcblk0p56): Magic Mismatch, valid(0xf2f52010) - read(0x6c37df02)
[ 4.601755] F2FS-fs (mmcblk0p56): Can't find valid F2FS filesystem in 1th superblock
[ 4.619587] EXT4-fs (mmcblk0p53): mounted filesystem with ordered data mode. Opts:
[ 4.632979] capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
[ 4.634513] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 4.634541] QSEECOM: qseecom_register_listener: Service 8192 is registered
[ 4.634948] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 4.634961] QSEECOM: qseecom_register_listener: Service 12288 is registered
[ 4.635742] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 4.635756] QSEECOM: qseecom_register_listener: Service 10 is registered
[ 4.636861] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 4.636886] QSEECOM: qseecom_register_listener: Service 28672 is registered
[ 8.492283] QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288
[ 8.607492] QSEECOM: qseecom_create_key: Set the key successfully
[ 8.607661] audit_printk_skb: 36 callbacks suppressed
[ 8.607663] audit: type=1400 audit(1596559068.476:23): avc: denied { read write } for pid=420 comm="recovery" name="device-mapper" dev="tmpfs" ino=16248 scontext=u:r:recovery:s0 tcontext=u:object_r:dm_device:s0 tclass=chr_file permissive=1
[ 8.607691] audit: type=1400 audit(1596559068.476:24): avc: denied { open } for pid=420 comm="recovery" path="/dev/device-mapper" dev="tmpfs" ino=16248 scontext=u:r:recovery:s0 tcontext=u:object_r:dm_device:s0 tclass=chr_file permissive=1
[ 8.607718] audit: type=1400 audit(1596559068.476:25): avc: denied { ioctl } for pid=420 comm="recovery" path="/dev/device-mapper" dev="tmpfs" ino=16248 ioctlcmd=0xfd03 scontext=u:r:recovery:s0 tcontext=u:object_r:dm_device:s0 tclass=chr_file permissive=1
[ 8.608690] device-mapper: req-crypt: req_crypt_ctr: Mapping block_device /dev/block/mmcblk0p56 to dm-req-crypt ok!\x0a
[ 10.661170] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
[ 10.759592] EXT4-fs (mmcblk0p54): mounted filesystem without journal. Opts:
[ 10.798916] EXT4-fs (mmcblk0p55): mounted filesystem without journal. Opts:
[ 10.878005] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
[ 10.902023] audit: type=1400 audit(1596559070.776:26): avc: denied { getattr } for pid=387 comm="recovery" path="/data/bootchart" dev="dm-0" ino=188417 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
[ 10.902055] audit: type=1400 audit(1596559070.776:27): avc: denied { read } for pid=387 comm="recovery" name="bootchart" dev="dm-0" ino=188417 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
[ 10.902071] audit: type=1400 audit(1596559070.776:28): avc: denied { open } for pid=387 comm="recovery" path="/data/bootchart" dev="dm-0" ino=188417 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
[ 10.902964] audit: type=1400 audit(1596559070.776:29): avc: denied { getattr } for pid=387 comm="recovery" path="/data/local/tmp" dev="dm-0" ino=1867778 scontext=u:r:recovery:s0 tcontext=u:object_r:shell_data_file:s0 tclass=dir permissive=1
[ 10.902986] audit: type=1400 audit(1596559070.776:30): avc: denied { read } for pid=387 comm="recovery" name="tmp" dev="dm-0" ino=1867778 scontext=u:r:recovery:s0 tcontext=u:object_r:shell_data_file:s0 tclass=dir permissive=1
[ 10.903001] audit: type=1400 audit(1596559070.776:31): avc: denied { open } for pid=387 comm="recovery" path="/data/local/tmp" dev="dm-0" ino=1867778 scontext=u:r:recovery:s0 tcontext=u:object_r:shell_data_file:s0 tclass=dir permissive=1
[ 10.903274] SELinux: Context u:object_r:trace_data_file:s0 is not valid (left unmapped).
[ 10.906830] audit: type=1400 audit(1596559070.776:32): avc: denied { getattr } for pid=387 comm="recovery" path="/data/data/com.android.fmradio" dev="dm-0" ino=2342914 scontext=u:r:recovery:s0 tcontext=u:object_r:system_app_data_file:s0 tclass=dir permissive=1
[ 10.907532] SELinux: Context u:object_r:privapp_data_file:s0:c512,c768 is not valid (left unmapped).
[ 14.095698] audit_printk_skb: 705 callbacks suppressed
[ 14.095701] audit: type=1400 audit(1596559073.966:268): avc: denied { getattr } for pid=387 comm="recovery" path="/data/data/com.android.chrome/lib" dev="dm-0" ino=2449508 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c96,c256,c512,c768 tclass=lnk_file permissive=1
[ 14.295633] audit: type=1400 audit(1596559074.166:269): avc: denied { getattr } for pid=387 comm="recovery" path="/data/data/com.google.android.gm" dev="dm-0" ino=2457601 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c106,c256,c512,c768 tclass=dir permissive=1
[ 14.295667] audit: type=1400 audit(1596559074.166:270): avc: denied { read } for pid=387 comm="recovery" name="com.google.android.gm" dev="dm-0" ino=2457601 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c106,c256,c512,c768 tclass=dir permissive=1
[ 14.295683] audit: type=1400 audit(1596559074.166:271): avc: denied { open } for pid=387 comm="recovery" path="/data/data/com.google.android.gm" dev="dm-0" ino=2457601 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c106,c256,c512,c768 tclass=dir permissive=1
[ 14.295977] audit: type=1400 audit(1596559074.166:272): avc: denied { getattr } for pid=387 comm="recovery" path="/data/data/com.google.android.gm/cache/highwaystar.ru@gmail.com/Screenshot_20171124-153023.png" dev="dm-0" ino=2457605 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c106,c256,c512,c768 tclass=file permissive=1
[ 14.634023] audit: type=1400 audit(1596559074.506:273): avc: denied { getattr } for pid=387 comm="recovery" path="/data/data/ru.bus62.SmartTransport" dev="dm-0" ino=2474257 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c112,c256,c512,c768 tclass=dir permissive=1
[ 14.634057] audit: type=1400 audit(1596559074.506:274): avc: denied { read } for pid=387 comm="recovery" name="ru.bus62.SmartTransport" dev="dm-0" ino=2474257 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c112,c256,c512,c768 tclass=dir permissive=1
[ 14.634075] audit: type=1400 audit(1596559074.506:275): avc: denied { open } for pid=387 comm="recovery" path="/data/data/ru.bus62.SmartTransport" dev="dm-0" ino=2474257 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c112,c256,c512,c768 tclass=dir permissive=1
[ 14.634445] audit: type=1400 audit(1596559074.506:276): avc: denied { getattr } for pid=387 comm="recovery" path="/data/data/ru.bus62.SmartTransport/shared_prefs/settings.xml" dev="dm-0" ino=2474261 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c112,c256,c512,c768 tclass=file permissive=1
[ 14.635047] audit: type=1400 audit(1596559074.506:277): avc: denied { getattr } for pid=387 comm="recovery" path="/data/data/tesmath.calcy" dev="dm-0" ino=2474274 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c108,c256,c512,c768 tclass=dir permissive=1
[ 15.213388] SELinux: Context u:object_r:network_watchlist_data_file:s0 is not valid (left unmapped).
[ 15.213602] SELinux: Context u:object_r:update_engine_log_data_file:s0 is not valid (left unmapped).
[ 15.213687] SELinux: Context u:object_r:wm_trace_data_file:s0 is not valid (left unmapped).
[ 15.213903] SELinux: Context u:object_r:stats_data_file:s0 is not valid (left unmapped).
[ 15.214084] SELinux: Context u:object_r:iorapd_data_file:s0 is not valid (left unmapped).
[ 15.338753] SELinux: Context u:object_r:packages_list_file:s0 is not valid (left unmapped).
[ 15.341150] SELinux: Context u:object_r:dropbox_data_file:s0 is not valid (left unmapped).
[ 15.381031] SELinux: Context u:object_r:storaged_data_file:s0 is not valid (left unmapped).
[ 15.381154] SELinux: Context u:object_r:rollback_data_file:s0 is not valid (left unmapped).
[ 15.583150] SELinux: Context u:object_r:vendor_data_file:s0 is not valid (left unmapped).
[ 15.583954] SELinux: Context u:object_r:vendor_audio_data_file:s0 is not valid (left unmapped).
[ 15.584420] SELinux: Context u:object_r:display_vendor_data_file:s0 is not valid (left unmapped).
[ 15.584576] SELinux: Context u:object_r:vendor_media_data_file:s0 is not valid (left unmapped).
[ 15.584937] SELinux: Context u:object_r:vendor_ramdump_data_file:s0 is not valid (left unmapped).
[ 15.585155] SELinux: Context u:object_r:vendor_bt_data_file:s0 is not valid (left unmapped).
[ 15.587853] SELinux: Context u:object_r:wpa_data_file:s0 is not valid (left unmapped).
[ 15.589645] SELinux: Context u:object_r:hostapd_data_file:s0 is not valid (left unmapped).
[ 15.590408] SELinux: Context u:object_r:vendor_mbn_data_file:s0 is not valid (left unmapped).
[ 15.590779] SELinux: Context u:object_r:mediadrm_vendor_data_file:s0 is not valid (left unmapped).
[ 15.593455] SELinux: Context u:object_r:face_vendor_data_file:s0 is not valid (left unmapped).
[ 15.594190] SELinux: Context u:object_r:fingerprint_vendor_data_file:s0 is not valid (left unmapped).
[ 15.609466] SELinux: Context u:object_r:apex_data_file:s0 is not valid (left unmapped).
[ 15.610772] SELinux: Context u:object_r:staging_data_file:s0 is not valid (left unmapped).
[ 15.612319] SELinux: Context u:object_r:adbroot_data_file:s0 is not valid (left unmapped).
[ 15.612904] SELinux: Context u:object_r:gsi_data_file:s0 is not valid (left unmapped).
[ 16.387581] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts:
[ 16.474515] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
[ 16.519132] EXT4-fs (mmcblk0p54): mounted filesystem without journal. Opts:
[ 16.559143] EXT4-fs (mmcblk0p55): mounted filesystem without journal. Opts:
[ 20.607867] audit_printk_skb: 1572 callbacks suppressed
[ 20.607870] audit: type=1400 audit(1596559080.476:802): avc: denied { getattr } for pid=387 comm="recovery" path="/data/data/com.android.internal.systemui.navbar.gestural_narrow_back" dev="dm-0" ino=2361710 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c162,c256,c512,c768 tclass=dir permissive=1
[ 20.607907] audit: type=1400 audit(1596559080.476:803): avc: denied { read } for pid=387 comm="recovery" name="com.android.internal.systemui.navbar.gestural_narrow_back" dev="dm-0" ino=2361710 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c162,c256,c512,c768 tclass=dir permissive=1
[ 20.607924] audit: type=1400 audit(1596559080.476:804): avc: denied { open } for pid=387 comm="recovery" path="/data/data/com.android.internal.systemui.navbar.gestural_narrow_back" dev="dm-0" ino=2361710 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c162,c256,c512,c768 tclass=dir permissive=1
[ 20.608721] audit: type=1400 audit(1596559080.476:805): avc: denied { getattr } for pid=387 comm="recovery" path="/data/data/com.android.theme.icon_pack.rounded.settings" dev="dm-0" ino=2361713 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c185,c256,c512,c768 tclass=dir permissive=1
[ 20.608748] audit: type=1400 audit(1596559080.476:806): avc: denied { read } for pid=387 comm="recovery" name="com.android.theme.icon_pack.rounded.settings" dev="dm-0" ino=2361713 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c185,c256,c512,c768 tclass=dir permissive=1
[ 20.608765] audit: type=1400 audit(1596559080.476:807): avc: denied { open } for pid=387 comm="recovery" path="/data/data/com.android.theme.icon_pack.rounded.settings" dev="dm-0" ino=2361713 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c185,c256,c512,c768 tclass=dir permissive=1
[ 20.610203] audit: type=1400 audit(1596559080.486:808): avc: denied { getattr } for pid=387 comm="recovery" path="/data/data/com.android.theme.icon_pack.circular.android" dev="dm-0" ino=2361719 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c189,c256,c512,c768 tclass=dir permissive=1
[ 20.610228] audit: type=1400 audit(1596559080.486:809): avc: denied { read } for pid=387 comm="recovery" name="com.android.theme.icon_pack.circular.android" dev="dm-0" ino=2361719 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c189,c256,c512,c768 tclass=dir permissive=1
[ 20.610245] audit: type=1400 audit(1596559080.486:810): avc: denied { open } for pid=387 comm="recovery" path="/data/data/com.android.theme.icon_pack.circular.android" dev="dm-0" ino=2361719 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c189,c256,c512,c768 tclass=dir permissive=1
[ 20.611024] audit: type=1400 audit(1596559080.486:811): avc: denied { getattr } for pid=387 comm="recovery" path="/data/data/com.lgeha.nuts" dev="dm-0" ino=2369093 scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c200,c256,c512,c768 tclass=dir permissive=1
[ 21.335778] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts:
[ 23.026757] selinux: avc: denied { set } for property=sys.usb.config pid=387 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1\x0a
[ 23.026837] init: processing action (sys.usb.config=none) from (/init.recovery.usb.rc:64)
[ 23.026949] init: Unable to write to '/config/usb_gadget/g1/UDC': No such device
[ 23.026971] init: Sending signal 9 to service 'adbd' (pid 398) process group...
[ 23.027111] init: Successfully killed process cgroup uid 0 pid 398 in 0ms
[ 23.027675] init: processing action (sys.usb.config=mtp,adb) from (/init.recovery.usb.rc:102)
[ 23.027758] init: Service 'adbd' (pid 398) killed by signal 9
[ 23.027771] init: Sending signal 9 to service 'adbd' (pid 398) process group...
[ 23.027809] init: Successfully killed process cgroup uid 0 pid 398 in 0ms
[ 23.027965] init: starting service 'adbd'...
[ 23.034136] read descriptors
[ 23.034227] read strings
[ 23.059374] EXT4-fs (mmcblk0p54): mounted filesystem without journal. Opts:
[ 23.831188] mtp_open
[ 34.622958] audit_printk_skb: 703 callbacks suppressed
[ 34.622961] audit: type=1400 audit(1596559094.496:1047): avc: denied { write } for pid=387 comm="recovery" name="Screenshots" dev="dm-0" ino=1081358 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
[ 34.622986] audit: type=1400 audit(1596559094.496:1048): avc: denied { add_name } for pid=387 comm="recovery" name="Screenshot_2020-08-04-11-38-14.png" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=1
[ 34.623008] audit: type=1400 audit(1596559094.496:1049): avc: denied { create } for pid=387 comm="recovery" name="Screenshot_2020-08-04-11-38-14.png" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
[ 34.624644] audit: type=1400 audit(1596559094.496:1050): avc: denied { write } for pid=387 comm="recovery" path="/data/media/0/Pictures/Screenshots/Screenshot_2020-08-04-11-38-14.png" dev="dm-0" ino=1081866 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
[ 34.945080] audit: type=1400 audit(1596559094.816:1051): avc: denied { setattr } for pid=387 comm="recovery" name="Screenshot_2020-08-04-11-38-14.png" dev="dm-0" ino=1081866 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
[ 34.974290] audit: type=1400 audit(1596559094.846:1052): avc: denied { read } for pid=456 comm="dmesg" name="kmsg" dev="tmpfs" ino=16083 scontext=u:r:recovery:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
[ 34.974316] audit: type=1400 audit(1596559094.846:1053): avc: denied { open } for pid=456 comm="dmesg" path="/dev/kmsg" dev="tmpfs" ino=16083 scontext=u:r:recovery:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment