Article HFN - Mettre à jour le RFlink depuis un Mac - https://hotfirenet.com/blog/3223-mettre-a-jour-le-rflink-depuis-un-mac/
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| vrdude: Version 6.3-20171130 | |
| Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ | |
| Copyright (c) 2007-2014 Joerg Wunsch | |
| System wide configuration file is "/Applications/Arduino.app/Contents/Java/hardware/tools/avr/etc/avrdude.conf" | |
| User configuration file is "/Users/djo/.avrduderc" | |
| User configuration file does not exist or is not a regular file, skipping | |
| Using Port : /dev/cu.usbmodem1411 | |
| Using Programmer : wiring | |
| Overriding Baud Rate : 115200 | |
| AVR Part : ATmega2560 | |
| Chip Erase delay : 9000 us | |
| PAGEL : PD7 | |
| BS2 : PA0 | |
| RESET disposition : dedicated | |
| RETRY pulse : SCK | |
| serial program mode : yes | |
| parallel program mode : yes | |
| Timeout : 200 | |
| StabDelay : 100 | |
| CmdexeDelay : 25 | |
| SyncLoops : 32 | |
| ByteDelay : 0 | |
| PollIndex : 3 | |
| PollValue : 0x53 | |
| Memory Detail : | |
| Block Poll Page Polled | |
| Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack | |
| ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- --------- | |
| eeprom 65 10 8 0 no 4096 8 0 9000 9000 0x00 0x00 | |
| flash 65 10 256 0 yes 262144 256 1024 4500 4500 0x00 0x00 | |
| lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
| hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
| efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
| lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00 | |
| calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00 | |
| signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00 | |
| Programmer Type : Wiring | |
| Description : Wiring | |
| Programmer Model: AVRISP | |
| Hardware Version: 15 | |
| Firmware Version Master : 2.10 | |
| Vtarget : 0.0 V | |
| SCK period : 0.1 us | |
| avrdude: AVR device initialized and ready to accept instructions | |
| Reading | ################################################## | 100% 0.01s | |
| avrdude: Device signature = 0x1e9801 (probably m2560) | |
| avrdude: safemode: lfuse reads as FF | |
| avrdude: safemode: hfuse reads as D8 | |
| avrdude: safemode: efuse reads as FF | |
| avrdude: reading input file "/Users/djo/Downloads/RFLink_v1.1_r48/RFLink.cpp.hex" | |
| avrdude: input file /Users/djo/Downloads/RFLink_v1.1_r48/RFLink.cpp.hex auto detected as Intel Hex | |
| avrdude: writing flash (199364 bytes): | |
| Writing | ################################################## | 100% 31.91s | |
| avrdude: 199364 bytes of flash written | |
| avrdude: verifying flash memory against /Users/djo/Downloads/RFLink_v1.1_r48/RFLink.cpp.hex: | |
| avrdude: load data flash data from input file /Users/djo/Downloads/RFLink_v1.1_r48/RFLink.cpp.hex: | |
| avrdude: input file /Users/djo/Downloads/RFLink_v1.1_r48/RFLink.cpp.hex auto detected as Intel Hex | |
| avrdude: input file /Users/djo/Downloads/RFLink_v1.1_r48/RFLink.cpp.hex contains 199364 bytes | |
| avrdude: reading on-chip flash data: | |
| Reading | ################################################## | 100% 25.51s | |
| avrdude: verifying ... | |
| avrdude: 199364 bytes of flash verified | |
| avrdude: safemode: lfuse reads as FF | |
| avrdude: safemode: hfuse reads as D8 | |
| avrdude: safemode: efuse reads as FF | |
| avrdude: safemode: Fuses OK (E:FF, H:D8, L:FF) | |
| avrdude done. Thank you |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment