Last active
August 29, 2015 14:01
-
-
Save IQAndreas/b6205964a734476c8196 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- | |
Latency: 0 | |
Capabilities: <access denied> | |
Kernel driver in use: agpgart-intel | |
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller]) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Interrupt: pin A routed to IRQ 44 | |
Region 0: Memory at e4400000 (64-bit, non-prefetchable) [size=1M] | |
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] | |
Region 4: I/O ports at 4000 [size=8] | |
Expansion ROM at <unassigned> [disabled] | |
Capabilities: <access denied> | |
Kernel driver in use: i915 | |
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Region 0: Memory at e4500000 (64-bit, non-prefetchable) [size=1M] | |
Capabilities: <access denied> | |
00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Interrupt: pin A routed to IRQ 43 | |
Region 0: Memory at e4600000 (32-bit, non-prefetchable) [size=128K] | |
Region 1: Memory at e4620000 (32-bit, non-prefetchable) [size=4K] | |
Region 2: I/O ports at 4020 [size=32] | |
Capabilities: <access denied> | |
Kernel driver in use: e1000e | |
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI]) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Interrupt: pin A routed to IRQ 16 | |
Region 4: I/O ports at 4040 [size=32] | |
Kernel driver in use: uhci_hcd | |
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI]) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Interrupt: pin B routed to IRQ 17 | |
Region 4: I/O ports at 4060 [size=32] | |
Kernel driver in use: uhci_hcd | |
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI]) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Interrupt: pin C routed to IRQ 18 | |
Region 0: Memory at e4621000 (32-bit, non-prefetchable) [size=1K] | |
Capabilities: <access denied> | |
Kernel driver in use: ehci-pci | |
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0, Cache Line Size: 64 bytes | |
Interrupt: pin A routed to IRQ 46 | |
Region 0: Memory at e4624000 (64-bit, non-prefetchable) [size=16K] | |
Capabilities: <access denied> | |
Kernel driver in use: snd_hda_intel | |
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode]) | |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0, Cache Line Size: 64 bytes | |
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 | |
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- | |
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- | |
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
Capabilities: <access denied> | |
Kernel driver in use: pcieport | |
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode]) | |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0, Cache Line Size: 64 bytes | |
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 | |
Memory behind bridge: e4000000-e40fffff | |
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- | |
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- | |
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
Capabilities: <access denied> | |
Kernel driver in use: pcieport | |
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode]) | |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0, Cache Line Size: 64 bytes | |
Bus: primary=00, secondary=18, subordinate=18, sec-latency=0 | |
I/O behind bridge: 00002000-00003fff | |
Memory behind bridge: e0000000-e3ffffff | |
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff | |
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- | |
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- | |
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
Capabilities: <access denied> | |
Kernel driver in use: pcieport | |
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI]) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Interrupt: pin A routed to IRQ 20 | |
Region 4: I/O ports at 4080 [size=32] | |
Kernel driver in use: uhci_hcd | |
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI]) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Interrupt: pin B routed to IRQ 22 | |
Region 4: I/O ports at 40a0 [size=32] | |
Kernel driver in use: uhci_hcd | |
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI]) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Interrupt: pin C routed to IRQ 18 | |
Region 4: I/O ports at 40c0 [size=32] | |
Kernel driver in use: uhci_hcd | |
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI]) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Interrupt: pin A routed to IRQ 20 | |
Region 0: Memory at e4628000 (32-bit, non-prefetchable) [size=1K] | |
Capabilities: <access denied> | |
Kernel driver in use: ehci-pci | |
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode]) | |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 | |
Memory behind bridge: e4100000-e43fffff | |
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- | |
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- | |
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
Capabilities: <access denied> | |
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M-E) LPC Interface Controller [8086:2811] (rev 03) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Capabilities: <access denied> | |
Kernel driver in use: lpc_ich | |
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP]) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0 | |
Interrupt: pin A routed to IRQ 16 | |
Region 0: I/O ports at 01f0 [size=8] | |
Region 1: I/O ports at 03f4 [size=1] | |
Region 2: I/O ports at 0170 [size=8] | |
Region 3: I/O ports at 0374 [size=1] | |
Region 4: I/O ports at 40e0 [size=16] | |
Kernel driver in use: ata_piix | |
02:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI]) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes | |
Interrupt: pin A routed to IRQ 20 | |
Region 0: Memory at e4100000 (32-bit, non-prefetchable) [size=2K] | |
Capabilities: <access denied> | |
Kernel driver in use: firewire_ohci | |
02:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) | |
Subsystem: Hewlett-Packard Company Device [103c:30c8] | |
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 64, Cache Line Size: 64 bytes | |
Interrupt: pin B routed to IRQ 22 | |
Region 0: Memory at e4101000 (32-bit, non-prefetchable) [size=256] | |
Capabilities: <access denied> | |
Kernel driver in use: sdhci-pci | |
10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61) | |
Subsystem: Intel Corporation Vaio VGN-SZ79SN_C [8086:1100] | |
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
Latency: 0, Cache Line Size: 64 bytes | |
Interrupt: pin A routed to IRQ 45 | |
Region 0: Memory at e4000000 (64-bit, non-prefetchable) [size=8K] | |
Capabilities: <access denied> | |
Kernel driver in use: iwl4965 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
smartctl 6.2 2013-04-20 r3812 [i686-linux-3.11.0-20-generic] (local build) | |
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org | |
=== START OF INFORMATION SECTION === | |
Model Family: Toshiba 1.8" HDD | |
Device Model: TOSHIBA MK8009GAH | |
Serial Number: 18TGW348W | |
Firmware Version: BS021C | |
User Capacity: 80,026,361,856 bytes [80.0 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: ATA/ATAPI-7 (minor revision not indicated) | |
Local Time is: Wed May 14 00:01:22 2014 CDT | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
See vendor-specific Attribute list for marginal Attributes. | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 120) seconds. | |
Offline data collection | |
capabilities: (0x51) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Suspend Offline collection upon new | |
command. | |
No Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 73) minutes. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
1 Raw_Read_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0 | |
2 Throughput_Performance 0x0007 100 100 050 Pre-fail Always - 0 | |
3 Spin_Up_Time 0x0003 100 100 002 Pre-fail Always - 1743 | |
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 6123 | |
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 | |
7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0 | |
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 | |
9 Power_On_Hours 0x0032 007 007 000 Old_age Always - 37211 | |
10 Spin_Retry_Count 0x0013 222 100 030 Pre-fail Always - 0 | |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4095 | |
187 Reported_Uncorrect 0x0032 094 094 000 Old_age Always - 6 | |
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 16 | |
190 Airflow_Temperature_Cel 0x0022 052 034 045 Old_age Always In_the_past 48 (Min/Max 32/48) | |
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 2977 | |
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8257662 | |
193 Load_Cycle_Count 0x0032 083 083 000 Old_age Always - 177060 | |
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 48 (Min/Max 4/66) | |
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 | |
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 8326 | |
222 Loaded_Hours 0x0032 018 018 000 Old_age Always - 32863 | |
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 | |
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 | |
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 206 | |
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 | |
SMART Error Log Version: 1 | |
ATA Error Count: 6 (device log contains only the most recent five errors) | |
CR = Command Register [HEX] | |
FR = Features Register [HEX] | |
SC = Sector Count Register [HEX] | |
SN = Sector Number Register [HEX] | |
CL = Cylinder Low Register [HEX] | |
CH = Cylinder High Register [HEX] | |
DH = Device/Head Register [HEX] | |
DC = Device Command Register [HEX] | |
ER = Error register [HEX] | |
ST = Status register [HEX] | |
Powered_Up_Time is measured from power on, and printed as | |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
Error 6 occurred at disk power-on lifetime: 17595 hours (733 days + 3 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
40 51 44 f9 a7 60 e7 Error: UNC 68 sectors at LBA = 0x0760a7f9 = 123774969 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
c8 00 00 3d a7 60 e7 00 00:00:48.560 READ DMA | |
ec 00 00 00 00 00 a0 02 00:00:48.552 IDENTIFY DEVICE | |
ef 03 45 00 00 00 a0 02 00:00:48.544 SET FEATURES [Set transfer mode] | |
ec 00 00 00 00 00 a0 02 00:00:48.536 IDENTIFY DEVICE | |
c8 00 00 3d a7 60 e7 00 00:00:43.945 READ DMA | |
Error 5 occurred at disk power-on lifetime: 17595 hours (733 days + 3 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
40 51 44 f9 a7 60 e7 Error: UNC 68 sectors at LBA = 0x0760a7f9 = 123774969 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
c8 00 00 3d a7 60 e7 00 00:00:43.945 READ DMA | |
ec 00 00 00 00 00 a0 02 00:00:43.937 IDENTIFY DEVICE | |
ef 03 45 00 00 00 a0 02 00:00:43.929 SET FEATURES [Set transfer mode] | |
ec 00 00 00 00 00 a0 02 00:00:43.922 IDENTIFY DEVICE | |
c8 00 00 3d a7 60 e7 00 00:00:39.458 READ DMA | |
Error 4 occurred at disk power-on lifetime: 17595 hours (733 days + 3 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
40 51 44 f9 a7 60 e7 Error: UNC 68 sectors at LBA = 0x0760a7f9 = 123774969 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
c8 00 00 3d a7 60 e7 00 00:00:39.458 READ DMA | |
ec 00 00 00 00 00 a0 02 00:00:39.450 IDENTIFY DEVICE | |
ef 03 45 00 00 00 a0 02 00:00:39.442 SET FEATURES [Set transfer mode] | |
ec 00 00 00 00 00 a0 02 00:00:39.436 IDENTIFY DEVICE | |
c8 00 00 3d a7 60 e7 00 00:00:34.963 READ DMA | |
Error 3 occurred at disk power-on lifetime: 17595 hours (733 days + 3 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
40 51 44 f9 a7 60 e7 Error: UNC 68 sectors at LBA = 0x0760a7f9 = 123774969 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
c8 00 00 3d a7 60 e7 00 00:00:34.963 READ DMA | |
ec 00 00 00 00 00 a0 02 00:00:34.955 IDENTIFY DEVICE | |
ef 03 45 00 00 00 a0 02 00:00:34.955 SET FEATURES [Set transfer mode] | |
ec 00 00 00 00 00 a0 02 00:00:34.950 IDENTIFY DEVICE | |
c8 00 00 3d a7 60 e7 00 00:00:30.452 READ DMA | |
Error 2 occurred at disk power-on lifetime: 17595 hours (733 days + 3 hours) | |
When the command that caused the error occurred, the device was active or idle. | |
After command completion occurred, registers were: | |
ER ST SC SN CL CH DH | |
-- -- -- -- -- -- -- | |
40 51 44 f9 a7 60 e7 Error: UNC 68 sectors at LBA = 0x0760a7f9 = 123774969 | |
Commands leading to the command that caused the error were: | |
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
-- -- -- -- -- -- -- -- ---------------- -------------------- | |
c8 00 00 3d a7 60 e7 00 00:00:30.452 READ DMA | |
ec 00 00 00 00 00 a0 02 00:00:30.444 IDENTIFY DEVICE | |
ef 03 45 00 00 00 a0 02 00:00:30.444 SET FEATURES [Set transfer mode] | |
ec 00 00 00 00 00 a0 02 00:00:30.436 IDENTIFY DEVICE | |
c8 00 00 3d a7 60 e7 00 00:00:25.902 READ DMA | |
SMART Self-test log structure revision number 1 | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Extended offline Completed without error 00% 6690 - | |
# 2 Short offline Completed without error 00% 6689 - | |
# 3 Extended offline Aborted by host 90% 5257 - | |
# 4 Short offline Completed without error 00% 1090 - | |
# 5 Extended offline Interrupted (host reset) 10% 14 - | |
SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment