Ihindng/alacritty.yml

## alacritty.yml
# Configuration for Alacritty, the GPU enhanced terminal emulator.

# Any items in the `env` entry below will be added as
# environment variables. Some entries may override variables
# set by alacritty itself.
# env:
  # TERM variable
  #
  # This value is used to set the `$TERM` environment variable for
  # each instance of Alacritty. If it is not present, alacritty will
  # check the local terminfo database and use `alacritty` if it is
  # available, otherwise `xterm-256color` is used.
  # TERM: xterm-256color
window:
  # Window dimensions (changes require restart)
  #
  # Specified in number of columns/lines, not pixels.
  # If both are `0`, this setting is ignored.
  dimensions:
    columns: 0
    lines: 0
  startup_mode: Windowed
  dynamic_padding: true
  decorations: transparent


  position:
   x: 0
   y: 0

  # Window padding (changes require restart)
  #
  # Blank space added around the window in pixels. This padding is scaled
  # by DPI and the specified value is always added at both opposing sides.
  padding:
    x: 0
    y: 0

scrolling:
  # Maximum number of lines in the scrollback buffer.
  # Specifying '0' will disable scrolling.
  history: 10000

  # Number of lines the viewport will move for every line scrolled when
  # scrollback is enabled (history > 0).
  multiplier: 3

  # Faux Scrolling
  #
  # The `faux_multiplier` setting controls the number of lines the terminal
  # should scroll when the alternate screen buffer is active. This is used
  # to allow mouse scrolling for applications like `man`.
  #
  # Specifying `0` will disable faux scrolling.
  faux_multiplier: 3

  # Scroll to the bottom when new text is written to the terminal.
  auto_scroll: false

# Spaces per Tab (changes require restart)
#
# This setting defines the width of a tab in cells.
#
# Some applications, like Emacs, rely on knowing about the width of a tab.
# To prevent unexpected behavior in these applications, it's also required to
# change the `it` value in terminfo when altering this setting.
tabspaces: 4

# If `true`, bold text is drawn using the bright color variants.
draw_bold_text_with_bright_colors: true
# Font configuration (changes require restart)
font:
  # The normal (roman) font face to use.
  normal:
    family: Iosevka Nerd Font Mono
    # Style can be specified to pick a specific face.
    style: Regular

  # The bold font face
  bold:
    family: Iosevka Nerd Font Mono
    # Style can be specified to pick a specific face.
    # style: Bold

  # The italic font face
  italic:
    family: Iosevka Nerd Font Mono
    # Style can be specified to pick a specific face.
    # style: Italic
  # Point size
  size: 26

  # Offset is the extra space around each character. `offset.y` can be thought of
  # as modifying the line spacing, and `offset.x` as modifying the letter spacing.
  offset:
    x: 0
    y: 0

  # Glyph offset determines the locations of the glyphs within their cells with
  # the default being at the bottom. Increasing `x` moves the glyph to the right,
  # increasing `y` moves the glyph upwards.
  glyph_offset:
    x: 0
    y: 0

# Colors (Tomorrow Night Bright)
colors:
  # Default colors
  primary:
    background: '0x002b36' # base03
    foreground: '0x839496' # base0'

    # Bright and dim foreground colors
    #
    # The dimmed foreground color is calculated automatically if it is not present.
    # If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
    # is `false`, the normal foreground color will be used.
    # dim_foreground: '0x9a9a9a'
    # bright_foreground: '0xffffff'

  # Cursor colors
  #
  # Colors which should be used to draw the terminal cursor. If these are unset,
  # the cursor color will be the inverse of the cell color.
  # cursor:
  #  text: '0x000000'
  #  cursor: '0xffffff'

  # Selection colors
  #
  # Colors which should be used to draw the selection area. If selection
  # background is unset, selection color will be the inverse of the cell colors.
  # If only text is unset the cell text color will remain the same.
  # selection:
  #  text: '0xeaeaea'
  #  background: '0x404040'

  # Normal colors
  normal:
    black:   '0x073642' # base02
    red:     '0xdc322f' # red
    green:   '0x859900' # green
    yellow:  '0xb58900' # yellow
    blue:    '0x268bd2' # blue
    magenta: '0xd33682' # magenta
    cyan:    '0x2aa198' # cyan
    white:   '0xeee8d5' # base2'

  # Bright colors
  bright:
    black:   '0x002b36' # base03
    red:     '0xcb4b16' # orange
    green:   '0x586e75' # base01
    yellow:  '0x657b83' # base00
    blue:    '0x839496' # base0
    magenta: '0x6c71c4' # violet
    cyan:    '0x93a1a1' # base1
    white:   '0xfdf6e3' # base3

  # Dim colors
  #
  # If the dim colors are not set, they will be calculated automatically based
  # on the `normal` colors.
  # dim:
  #  black:   '0x000000'
  #  red:     '0x8c3336'
  #  green:   '0x7a8530'
  #  yellow:  '0x97822e'
  #  blue:    '0x506d8f'
  #  magenta: '0x80638e'
  #  cyan:    '0x497e7a'
  #  white:   '0x9a9a9a'

  # Indexed Colors
  #
  # The indexed colors include all colors from 16 to 256.
  # When these are not set, they're filled with sensible defaults.
  #
  # Example:
  #   `- { index: 16, color: '0xff00ff' }`
  #
  indexed_colors: []

# Visual Bell
#
# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
# rung, the terminal background will be set to white and transition back to the
# default background color. You can control the rate of this transition by
# setting the `duration` property (represented in milliseconds). You can also
# configure the transition function by setting the `animation` property.
#
# Values for `animation`:
#   - Ease
#   - EaseOut
#   - EaseOutSine
#   - EaseOutQuad
#   - EaseOutCubic
#   - EaseOutQuart
#   - EaseOutQuint
#   - EaseOutExpo
#   - EaseOutCirc
#   - Linear
#
# Specifying a `duration` of `0` will disable the visual bell.
visual_bell:
  animation: EaseOutExpo
  duration: 0
  color: '0xffffff'

# Background opacity
#
# Window opacity as a floating point number from `0.0` to `1.0`.
# The value `0.0` is completely transparent and `1.0` is opaque.
background_opacity: 0.8

selection:
  semantic_escape_chars: ",│`|:\"' ()[]{}<>"

  # When set to `true`, selected text will be copied to the primary clipboard.
  save_to_clipboard: false

# Allow terminal applications to change Alacritty's window title.
dynamic_title: true

cursor:
  # Cursor style
  #
  # Values for `style`:
  #   - ▇ Block
  #   - _ Underline
  #   - | Beam
  style: Block

  # If this is `true`, the cursor will be rendered as a hollow box when the
  # window is not focused.
  unfocused_hollow: true

# Live config reload (changes require restart)
live_config_reload: true

# Shell
#
# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
# Entries in `shell.args` are passed unmodified as arguments to the shell.
#
# Default:
#   - (macOS) /bin/bash --login
#   - (Linux) user login shell
#   - (Windows) powershell
# shell:
#  program: /bin/bash
#  args:
#    - --login

# Startup directory
#
# Directory the shell is started in. If this is unset, or `None`, the working
# directory of the parent process will be used.
working_directory: None

# Windows 10 ConPTY backend (Windows only)
#
# This will enable better color support and may resolve other issues,
# however this API and its implementation is still young and so is
# disabled by default, as stability may not be as good as the winpty
# backend.
#
# Alacritty will fall back to the WinPTY automatically if the ConPTY
# backend cannot be initialized.
enable_experimental_conpty_backend: false

# Send ESC (\x1b) before characters when alt is pressed.
alt_send_esc: true

debug:
  # Display the time it takes to redraw each frame.
  render_timer: false

  # Keep the log file after quitting Alacritty.
  persistent_logging: false

  # Log level
  #
  # Values for `log_level`:
  #   - None
  #   - Error
  #   - Warn
  #   - Info
  #   - Debug
  #   - Trace
  log_level: Warn

  # Print all received window events.
  print_events: false

  # Record all characters and escape sequences as test data.
  ref_test: false

mouse:
  # Click settings
  #
  # The `double_click` and `triple_click` settings control the time
  # alacritty should wait for accepting multiple clicks as one double
  # or triple click.
  double_click: { threshold: 300 }
  triple_click: { threshold: 300 }

  # If this is `true`, the cursor is temporarily hidden when typing.
  hide_when_typing: false

  url:
    # URL launcher
    #
    # This program is executed when clicking on a text which is recognized as a URL.
    # The URL is always added to the command as the last parameter.
    #
    # When set to `None`, URL launching will be disabled completely.
    #
    # Default:
    #   - (macOS) open
    #   - (Linux) xdg-open
    #   - (Windows) explorer
    # launcher:
    #  program: xdg-open
    #  args: []

    # URL modifiers
    #
    # These are the modifiers that need to be held down for opening URLs when clicking
    # on them. The available modifiers are documented in the key binding section.
    modifiers: None

# Mouse bindings
#
# Mouse bindings are specified as a list of objects, much like the key
# bindings further below.
#
# Each mouse binding will specify a:
#
# - `mouse`:
#
#   - Middle
#   - Left
#   - Right
#   - Numeric identifier such as `5`
#
# - `action` (see key bindings)
#
# And optionally:
#
# - `mods` (see key bindings)
mouse_bindings:
  - { mouse: Middle, action: PasteSelection }

# Key bindings
#
# Key bindings are specified as a list of objects. For example, this is the
# default paste binding:
#
# `- { key: V, mods: Control|Shift, action: Paste }`
#
# Each key binding will specify a:
#
# - `key`: Identifier of the key pressed
#
#    - A-Z
#    - F1-F12
#    - Key0-Key9
#
#    A full list with available key codes can be found here:
#    https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html# variants
#
#    Instead of using the name of the keys, the `key` field also supports using
#    the scancode of the desired key. Scancodes have to be specified as a
#    decimal number. This command will allow you to display the hex scancodes
#    for certain keys:
#
#       `showkey --scancodes`.
#
# Then exactly one of:
#
# - `chars`: Send a byte sequence to the running application
#
#    The `chars` field writes the specified string to the terminal. This makes
#    it possible to pass escape sequences. To find escape codes for bindings
#    like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside
#    of tmux. Note that applications use terminfo to map escape sequences back
#    to keys. It is therefore required to update the terminfo when changing an
#    escape sequence.
#
# - `action`: Execute a predefined action
#
#   - Copy
#   - Paste
#   - PasteSelection
#   - IncreaseFontSize
#   - DecreaseFontSize
#   - ResetFontSize
#   - ScrollPageUp
#   - ScrollPageDown
#   - ScrollLineUp
#   - ScrollLineDown
#   - ScrollToTop
#   - ScrollToBottom
#   - ClearHistory
#   - Hide
#   - Quit
#   - ToggleFullscreen
#   - SpawnNewInstance
#   - ClearLogNotice
#   - None
#
#   (macOS only):
#   - ToggleSimpleFullscreen: Enters fullscreen without occupying another space
#
# - `command`: Fork and execute a specified command plus arguments
#
#    The `command` field must be a map containing a `program` string and an
#    `args` array of command line parameter strings. For example:
#       `{ program: "alacritty", args: ["-e", "vttest"] }`
#
# And optionally:
#
# - `mods`: Key modifiers to filter binding actions
#
#    - Command
#    - Control
#    - Option
#    - Super
#    - Shift
#    - Alt
#
#    Multiple `mods` can be combined using `|` like this:
#       `mods: Control|Shift`.
#    Whitespace and capitalization are relevant and must match the example.
#
# - `mode`: Indicate a binding for only specific terminal reported modes
#
#    This is mainly used to send applications the correct escape sequences
#    when in different modes.
#
#    - AppCursor
#    - AppKeypad
#    - Alt
#
#    A `~` operator can be used before a mode to apply the binding whenever
#    the mode is *not* active, e.g. `~Alt`.
#
# Bindings are always filled by default, but will be replaced when a new
# binding with the same triggers is defined. To unset a default binding, it can
# be mapped to the `None` action.
key_bindings:
  # (Windows/Linux only)
  # - { key: V,        mods: Control|Shift, action: Paste            }
  # - { key: C,        mods: Control|Shift, action: Copy             }
  # - { key: Insert,   mods: Shift,         action: PasteSelection   }
  # - { key: Key0,     mods: Control,       action: ResetFontSize    }
  # - { key: Equals,   mods: Control,       action: IncreaseFontSize }
  # - { key: Add,      mods: Control,       action: IncreaseFontSize }
  # - { key: Subtract, mods: Control,       action: DecreaseFontSize }
  # - { key: Minus,    mods: Control,       action: DecreaseFontSize }
  # - { key: Return,   mods: Alt,           action: ToggleFullscreen }

  # (macOS only)
  # - { key: Key0,   mods: Command,         action: ResetFontSize    }
  # - { key: Equals, mods: Command,         action: IncreaseFontSize }
  # - { key: Add,    mods: Command,         action: IncreaseFontSize }
  # - { key: Minus,  mods: Command,         action: DecreaseFontSize }
  # - { key: K,      mods: Command,         action: ClearHistory     }
  # - { key: K,      mods: Command,         chars: "\x0c"            }
  # - { key: V,      mods: Command,         action: Paste            }
  # - { key: C,      mods: Command,         action: Copy             }
  # - { key: H,      mods: Command,         action: Hide             }
  # - { key: Q,      mods: Command,         action: Quit             }
  # - { key: W,      mods: Command,         action: Quit             }
  # - { key: F,      mods: Command|Control, action: ToggleFullscreen }

  - { key: Paste,                   action: Paste                            }
  - { key: Copy,                    action: Copy                             }
  - { key: L,        mods: Control, action: ClearLogNotice                   }
  - { key: L,        mods: Control, chars: "\x0c"                            }
  - { key: Home,     mods: Alt,     chars: "\x1b[1;3H"                       }
  - { key: Home,                    chars: "\x1bOH",        mode: AppCursor  }
  - { key: Home,                    chars: "\x1b[H",        mode: ~AppCursor }
  - { key: End,      mods: Alt,     chars: "\x1b[1;3F"                       }
  - { key: End,                     chars: "\x1bOF",        mode: AppCursor  }
  - { key: End,                     chars: "\x1b[F",        mode: ~AppCursor }
  - { key: PageUp,   mods: Shift,   action: ScrollPageUp,   mode: ~Alt       }
  - { key: PageUp,   mods: Shift,   chars: "\x1b[5;2~",     mode: Alt        }
  - { key: PageUp,   mods: Control, chars: "\x1b[5;5~"                       }
  - { key: PageUp,   mods: Alt,     chars: "\x1b[5;3~"                       }
  - { key: PageUp,                  chars: "\x1b[5~"                         }
  - { key: PageDown, mods: Shift,   action: ScrollPageDown, mode: ~Alt       }
  - { key: PageDown, mods: Shift,   chars: "\x1b[6;2~",     mode: Alt        }
  - { key: PageDown, mods: Control, chars: "\x1b[6;5~"                       }
  - { key: PageDown, mods: Alt,     chars: "\x1b[6;3~"                       }
  - { key: PageDown,                chars: "\x1b[6~"                         }
  - { key: Tab,      mods: Shift,   chars: "\x1b[Z"                          }
  - { key: Back,                    chars: "\x7f"                            }
  - { key: Back,     mods: Alt,     chars: "\x1b\x7f"                        }
  - { key: Insert,                  chars: "\x1b[2~"                         }
  - { key: Delete,                  chars: "\x1b[3~"                         }
  - { key: Left,     mods: Shift,   chars: "\x1b[1;2D"                       }
  - { key: Left,     mods: Control, chars: "\x1b[1;5D"                       }
  - { key: Left,     mods: Alt,     chars: "\x1b[1;3D"                       }
  - { key: Left,                    chars: "\x1b[D",        mode: ~AppCursor }
  - { key: Left,                    chars: "\x1bOD",        mode: AppCursor  }
  - { key: Right,    mods: Shift,   chars: "\x1b[1;2C"                       }
  - { key: Right,    mods: Control, chars: "\x1b[1;5C"                       }
  - { key: Right,    mods: Alt,     chars: "\x1b[1;3C"                       }
  - { key: Right,                   chars: "\x1b[C",        mode: ~AppCursor }
  - { key: Right,                   chars: "\x1bOC",        mode: AppCursor  }
  - { key: Up,       mods: Shift,   chars: "\x1b[1;2A"                       }
  - { key: Up,       mods: Control, chars: "\x1b[1;5A"                       }
  - { key: Up,       mods: Alt,     chars: "\x1b[1;3A"                       }
  - { key: Up,                      chars: "\x1b[A",        mode: ~AppCursor }
  - { key: Up,                      chars: "\x1bOA",        mode: AppCursor  }
  - { key: Down,     mods: Shift,   chars: "\x1b[1;2B"                       }
  - { key: Down,     mods: Control, chars: "\x1b[1;5B"                       }
  - { key: Down,     mods: Alt,     chars: "\x1b[1;3B"                       }
  - { key: Down,                    chars: "\x1b[B",        mode: ~AppCursor }
  - { key: Down,                    chars: "\x1bOB",        mode: AppCursor  }
  - { key: F1,                      chars: "\x1bOP"                          }
  - { key: F2,                      chars: "\x1bOQ"                          }
  - { key: F3,                      chars: "\x1bOR"                          }
  - { key: F4,                      chars: "\x1bOS"                          }
  - { key: F5,                      chars: "\x1b[15~"                        }
  - { key: F6,                      chars: "\x1b[17~"                        }
  - { key: F7,                      chars: "\x1b[18~"                        }
  - { key: F8,                      chars: "\x1b[19~"                        }
  - { key: F9,                      chars: "\x1b[20~"                        }
  - { key: F10,                     chars: "\x1b[21~"                        }
  - { key: F11,                     chars: "\x1b[23~"                        }
  - { key: F12,                     chars: "\x1b[24~"                        }
  - { key: F1,       mods: Shift,   chars: "\x1b[1;2P"                       }
  - { key: F2,       mods: Shift,   chars: "\x1b[1;2Q"                       }
  - { key: F3,       mods: Shift,   chars: "\x1b[1;2R"                       }
  - { key: F4,       mods: Shift,   chars: "\x1b[1;2S"                       }
  - { key: F5,       mods: Shift,   chars: "\x1b[15;2~"                      }
  - { key: F6,       mods: Shift,   chars: "\x1b[17;2~"                      }
  - { key: F7,       mods: Shift,   chars: "\x1b[18;2~"                      }
  - { key: F8,       mods: Shift,   chars: "\x1b[19;2~"                      }
  - { key: F9,       mods: Shift,   chars: "\x1b[20;2~"                      }
  - { key: F10,      mods: Shift,   chars: "\x1b[21;2~"                      }
  - { key: F11,      mods: Shift,   chars: "\x1b[23;2~"                      }
  - { key: F12,      mods: Shift,   chars: "\x1b[24;2~"                      }
  - { key: F1,       mods: Control, chars: "\x1b[1;5P"                       }
  - { key: F2,       mods: Control, chars: "\x1b[1;5Q"                       }
  - { key: F3,       mods: Control, chars: "\x1b[1;5R"                       }
  - { key: F4,       mods: Control, chars: "\x1b[1;5S"                       }
  - { key: F5,       mods: Control, chars: "\x1b[15;5~"                      }
  - { key: F6,       mods: Control, chars: "\x1b[17;5~"                      }
  - { key: F7,       mods: Control, chars: "\x1b[18;5~"                      }
  - { key: F8,       mods: Control, chars: "\x1b[19;5~"                      }
  - { key: F9,       mods: Control, chars: "\x1b[20;5~"                      }
  - { key: F10,      mods: Control, chars: "\x1b[21;5~"                      }
  - { key: F11,      mods: Control, chars: "\x1b[23;5~"                      }
  - { key: F12,      mods: Control, chars: "\x1b[24;5~"                      }
  - { key: F1,       mods: Alt,     chars: "\x1b[1;6P"                       }
  - { key: F2,       mods: Alt,     chars: "\x1b[1;6Q"                       }
  - { key: F3,       mods: Alt,     chars: "\x1b[1;6R"                       }
  - { key: F4,       mods: Alt,     chars: "\x1b[1;6S"                       }
  - { key: F5,       mods: Alt,     chars: "\x1b[15;6~"                      }
  - { key: F6,       mods: Alt,     chars: "\x1b[17;6~"                      }
  - { key: F7,       mods: Alt,     chars: "\x1b[18;6~"                      }
  - { key: F8,       mods: Alt,     chars: "\x1b[19;6~"                      }
  - { key: F9,       mods: Alt,     chars: "\x1b[20;6~"                      }
  - { key: F10,      mods: Alt,     chars: "\x1b[21;6~"                      }
  - { key: F11,      mods: Alt,     chars: "\x1b[23;6~"                      }
  - { key: F12,      mods: Alt,     chars: "\x1b[24;6~"                      }
  - { key: F1,       mods: Super,   chars: "\x1b[1;3P"                       }
  - { key: F2,       mods: Super,   chars: "\x1b[1;3Q"                       }
  - { key: F3,       mods: Super,   chars: "\x1b[1;3R"                       }
  - { key: F4,       mods: Super,   chars: "\x1b[1;3S"                       }
  - { key: F5,       mods: Super,   chars: "\x1b[15;3~"                      }
  - { key: F6,       mods: Super,   chars: "\x1b[17;3~"                      }
  - { key: F7,       mods: Super,   chars: "\x1b[18;3~"                      }
  - { key: F8,       mods: Super,   chars: "\x1b[19;3~"                      }
  - { key: F9,       mods: Super,   chars: "\x1b[20;3~"                      }
  - { key: F10,      mods: Super,   chars: "\x1b[21;3~"                      }
  - { key: F11,      mods: Super,   chars: "\x1b[23;3~"                      }
  - { key: F12,      mods: Super,   chars: "\x1b[24;3~"                      }
  - { key: NumpadEnter,             chars: "\n"                              }
	# Configuration for Alacritty, the GPU enhanced terminal emulator.

	# Any items in the `env` entry below will be added as
	# environment variables. Some entries may override variables
	# set by alacritty itself.
	# env:
	# TERM variable
	#
	# This value is used to set the `$TERM` environment variable for
	# each instance of Alacritty. If it is not present, alacritty will
	# check the local terminfo database and use `alacritty` if it is
	# available, otherwise `xterm-256color` is used.
	# TERM: xterm-256color
	window:
	# Window dimensions (changes require restart)
	#
	# Specified in number of columns/lines, not pixels.
	# If both are `0`, this setting is ignored.
	dimensions:
	columns: 0
	lines: 0
	startup_mode: Windowed
	dynamic_padding: true
	decorations: transparent


	position:
	x: 0
	y: 0

	# Window padding (changes require restart)
	#
	# Blank space added around the window in pixels. This padding is scaled
	# by DPI and the specified value is always added at both opposing sides.
	padding:
	x: 0
	y: 0

	scrolling:
	# Maximum number of lines in the scrollback buffer.
	# Specifying '0' will disable scrolling.
	history: 10000

	# Number of lines the viewport will move for every line scrolled when
	# scrollback is enabled (history > 0).
	multiplier: 3

	# Faux Scrolling
	#
	# The `faux_multiplier` setting controls the number of lines the terminal
	# should scroll when the alternate screen buffer is active. This is used
	# to allow mouse scrolling for applications like `man`.
	#
	# Specifying `0` will disable faux scrolling.
	faux_multiplier: 3

	# Scroll to the bottom when new text is written to the terminal.
	auto_scroll: false

	# Spaces per Tab (changes require restart)
	#
	# This setting defines the width of a tab in cells.
	#
	# Some applications, like Emacs, rely on knowing about the width of a tab.
	# To prevent unexpected behavior in these applications, it's also required to
	# change the `it` value in terminfo when altering this setting.
	tabspaces: 4

	# If `true`, bold text is drawn using the bright color variants.
	draw_bold_text_with_bright_colors: true
	# Font configuration (changes require restart)
	font:
	# The normal (roman) font face to use.
	normal:
	family: Iosevka Nerd Font Mono
	# Style can be specified to pick a specific face.
	style: Regular

	# The bold font face
	bold:
	family: Iosevka Nerd Font Mono
	# Style can be specified to pick a specific face.
	# style: Bold

	# The italic font face
	italic:
	family: Iosevka Nerd Font Mono
	# Style can be specified to pick a specific face.
	# style: Italic
	# Point size
	size: 26

	# Offset is the extra space around each character. `offset.y` can be thought of
	# as modifying the line spacing, and `offset.x` as modifying the letter spacing.
	offset:
	x: 0
	y: 0

	# Glyph offset determines the locations of the glyphs within their cells with
	# the default being at the bottom. Increasing `x` moves the glyph to the right,
	# increasing `y` moves the glyph upwards.
	glyph_offset:
	x: 0
	y: 0

	# Colors (Tomorrow Night Bright)
	colors:
	# Default colors
	primary:
	background: '0x002b36' # base03
	foreground: '0x839496' # base0'

	# Bright and dim foreground colors
	#
	# The dimmed foreground color is calculated automatically if it is not present.
	# If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
	# is `false`, the normal foreground color will be used.
	# dim_foreground: '0x9a9a9a'
	# bright_foreground: '0xffffff'

	# Cursor colors
	#
	# Colors which should be used to draw the terminal cursor. If these are unset,
	# the cursor color will be the inverse of the cell color.
	# cursor:
	# text: '0x000000'
	# cursor: '0xffffff'

	# Selection colors
	#
	# Colors which should be used to draw the selection area. If selection
	# background is unset, selection color will be the inverse of the cell colors.
	# If only text is unset the cell text color will remain the same.
	# selection:
	# text: '0xeaeaea'
	# background: '0x404040'

	# Normal colors
	normal:
	black: '0x073642' # base02
	red: '0xdc322f' # red
	green: '0x859900' # green
	yellow: '0xb58900' # yellow
	blue: '0x268bd2' # blue
	magenta: '0xd33682' # magenta
	cyan: '0x2aa198' # cyan
	white: '0xeee8d5' # base2'

	# Bright colors
	bright:
	black: '0x002b36' # base03
	red: '0xcb4b16' # orange
	green: '0x586e75' # base01
	yellow: '0x657b83' # base00
	blue: '0x839496' # base0
	magenta: '0x6c71c4' # violet
	cyan: '0x93a1a1' # base1
	white: '0xfdf6e3' # base3

	# Dim colors
	#
	# If the dim colors are not set, they will be calculated automatically based
	# on the `normal` colors.
	# dim:
	# black: '0x000000'
	# red: '0x8c3336'
	# green: '0x7a8530'
	# yellow: '0x97822e'
	# blue: '0x506d8f'
	# magenta: '0x80638e'
	# cyan: '0x497e7a'
	# white: '0x9a9a9a'

	# Indexed Colors
	#
	# The indexed colors include all colors from 16 to 256.
	# When these are not set, they're filled with sensible defaults.
	#
	# Example:
	# `- { index: 16, color: '0xff00ff' }`
	#
	indexed_colors: []

	# Visual Bell
	#
	# Any time the BEL code is received, Alacritty "rings" the visual bell. Once
	# rung, the terminal background will be set to white and transition back to the
	# default background color. You can control the rate of this transition by
	# setting the `duration` property (represented in milliseconds). You can also
	# configure the transition function by setting the `animation` property.
	#
	# Values for `animation`:
	# - Ease
	# - EaseOut
	# - EaseOutSine
	# - EaseOutQuad
	# - EaseOutCubic
	# - EaseOutQuart
	# - EaseOutQuint
	# - EaseOutExpo
	# - EaseOutCirc
	# - Linear
	#
	# Specifying a `duration` of `0` will disable the visual bell.
	visual_bell:
	animation: EaseOutExpo
	duration: 0
	color: '0xffffff'

	# Background opacity
	#
	# Window opacity as a floating point number from `0.0` to `1.0`.
	# The value `0.0` is completely transparent and `1.0` is opaque.
	background_opacity: 0.8

	selection:
	semantic_escape_chars: ",│`\|:\"' ()[]{}<>"

	# When set to `true`, selected text will be copied to the primary clipboard.
	save_to_clipboard: false

	# Allow terminal applications to change Alacritty's window title.
	dynamic_title: true

	cursor:
	# Cursor style
	#
	# Values for `style`:
	# - ▇ Block
	# - _ Underline
	# - \| Beam
	style: Block

	# If this is `true`, the cursor will be rendered as a hollow box when the
	# window is not focused.
	unfocused_hollow: true

	# Live config reload (changes require restart)
	live_config_reload: true

	# Shell
	#
	# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
	# Entries in `shell.args` are passed unmodified as arguments to the shell.
	#
	# Default:
	# - (macOS) /bin/bash --login
	# - (Linux) user login shell
	# - (Windows) powershell
	# shell:
	# program: /bin/bash
	# args:
	# - --login

	# Startup directory
	#
	# Directory the shell is started in. If this is unset, or `None`, the working
	# directory of the parent process will be used.
	working_directory: None

	# Windows 10 ConPTY backend (Windows only)
	#
	# This will enable better color support and may resolve other issues,
	# however this API and its implementation is still young and so is
	# disabled by default, as stability may not be as good as the winpty
	# backend.
	#
	# Alacritty will fall back to the WinPTY automatically if the ConPTY
	# backend cannot be initialized.
	enable_experimental_conpty_backend: false

	# Send ESC (\x1b) before characters when alt is pressed.
	alt_send_esc: true

	debug:
	# Display the time it takes to redraw each frame.
	render_timer: false

	# Keep the log file after quitting Alacritty.
	persistent_logging: false

	# Log level
	#
	# Values for `log_level`:
	# - None
	# - Error
	# - Warn
	# - Info
	# - Debug
	# - Trace
	log_level: Warn

	# Print all received window events.
	print_events: false

	# Record all characters and escape sequences as test data.
	ref_test: false

	mouse:
	# Click settings
	#
	# The `double_click` and `triple_click` settings control the time
	# alacritty should wait for accepting multiple clicks as one double
	# or triple click.
	double_click: { threshold: 300 }
	triple_click: { threshold: 300 }

	# If this is `true`, the cursor is temporarily hidden when typing.
	hide_when_typing: false

	url:
	# URL launcher
	#
	# This program is executed when clicking on a text which is recognized as a URL.
	# The URL is always added to the command as the last parameter.
	#
	# When set to `None`, URL launching will be disabled completely.
	#
	# Default:
	# - (macOS) open
	# - (Linux) xdg-open
	# - (Windows) explorer
	# launcher:
	# program: xdg-open
	# args: []

	# URL modifiers
	#
	# These are the modifiers that need to be held down for opening URLs when clicking
	# on them. The available modifiers are documented in the key binding section.
	modifiers: None

	# Mouse bindings
	#
	# Mouse bindings are specified as a list of objects, much like the key
	# bindings further below.
	#
	# Each mouse binding will specify a:
	#
	# - `mouse`:
	#
	# - Middle
	# - Left
	# - Right
	# - Numeric identifier such as `5`
	#
	# - `action` (see key bindings)
	#
	# And optionally:
	#
	# - `mods` (see key bindings)
	mouse_bindings:
	- { mouse: Middle, action: PasteSelection }

	# Key bindings
	#
	# Key bindings are specified as a list of objects. For example, this is the
	# default paste binding:
	#
	# `- { key: V, mods: Control\|Shift, action: Paste }`
	#
	# Each key binding will specify a:
	#
	# - `key`: Identifier of the key pressed
	#
	# - A-Z
	# - F1-F12
	# - Key0-Key9
	#
	# A full list with available key codes can be found here:
	# https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html# variants
	#
	# Instead of using the name of the keys, the `key` field also supports using
	# the scancode of the desired key. Scancodes have to be specified as a
	# decimal number. This command will allow you to display the hex scancodes
	# for certain keys:
	#
	# `showkey --scancodes`.
	#
	# Then exactly one of:
	#
	# - `chars`: Send a byte sequence to the running application
	#
	# The `chars` field writes the specified string to the terminal. This makes
	# it possible to pass escape sequences. To find escape codes for bindings
	# like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside
	# of tmux. Note that applications use terminfo to map escape sequences back
	# to keys. It is therefore required to update the terminfo when changing an
	# escape sequence.
	#
	# - `action`: Execute a predefined action
	#
	# - Copy
	# - Paste
	# - PasteSelection
	# - IncreaseFontSize
	# - DecreaseFontSize
	# - ResetFontSize
	# - ScrollPageUp
	# - ScrollPageDown
	# - ScrollLineUp
	# - ScrollLineDown
	# - ScrollToTop
	# - ScrollToBottom
	# - ClearHistory
	# - Hide
	# - Quit
	# - ToggleFullscreen
	# - SpawnNewInstance
	# - ClearLogNotice
	# - None
	#
	# (macOS only):
	# - ToggleSimpleFullscreen: Enters fullscreen without occupying another space
	#
	# - `command`: Fork and execute a specified command plus arguments
	#
	# The `command` field must be a map containing a `program` string and an
	# `args` array of command line parameter strings. For example:
	# `{ program: "alacritty", args: ["-e", "vttest"] }`
	#
	# And optionally:
	#
	# - `mods`: Key modifiers to filter binding actions
	#
	# - Command
	# - Control
	# - Option
	# - Super
	# - Shift
	# - Alt
	#
	# Multiple `mods` can be combined using `\|` like this:
	# `mods: Control\|Shift`.
	# Whitespace and capitalization are relevant and must match the example.
	#
	# - `mode`: Indicate a binding for only specific terminal reported modes
	#
	# This is mainly used to send applications the correct escape sequences
	# when in different modes.
	#
	# - AppCursor
	# - AppKeypad
	# - Alt
	#
	# A `~` operator can be used before a mode to apply the binding whenever
	# the mode is not active, e.g. `~Alt`.
	#
	# Bindings are always filled by default, but will be replaced when a new
	# binding with the same triggers is defined. To unset a default binding, it can
	# be mapped to the `None` action.
	key_bindings:
	# (Windows/Linux only)
	# - { key: V, mods: Control\|Shift, action: Paste }
	# - { key: C, mods: Control\|Shift, action: Copy }
	# - { key: Insert, mods: Shift, action: PasteSelection }
	# - { key: Key0, mods: Control, action: ResetFontSize }
	# - { key: Equals, mods: Control, action: IncreaseFontSize }
	# - { key: Add, mods: Control, action: IncreaseFontSize }
	# - { key: Subtract, mods: Control, action: DecreaseFontSize }
	# - { key: Minus, mods: Control, action: DecreaseFontSize }
	# - { key: Return, mods: Alt, action: ToggleFullscreen }

	# (macOS only)
	# - { key: Key0, mods: Command, action: ResetFontSize }
	# - { key: Equals, mods: Command, action: IncreaseFontSize }
	# - { key: Add, mods: Command, action: IncreaseFontSize }
	# - { key: Minus, mods: Command, action: DecreaseFontSize }
	# - { key: K, mods: Command, action: ClearHistory }
	# - { key: K, mods: Command, chars: "\x0c" }
	# - { key: V, mods: Command, action: Paste }
	# - { key: C, mods: Command, action: Copy }
	# - { key: H, mods: Command, action: Hide }
	# - { key: Q, mods: Command, action: Quit }
	# - { key: W, mods: Command, action: Quit }
	# - { key: F, mods: Command\|Control, action: ToggleFullscreen }

	- { key: Paste, action: Paste }
	- { key: Copy, action: Copy }
	- { key: L, mods: Control, action: ClearLogNotice }
	- { key: L, mods: Control, chars: "\x0c" }
	- { key: Home, mods: Alt, chars: "\x1b[1;3H" }
	- { key: Home, chars: "\x1bOH", mode: AppCursor }
	- { key: Home, chars: "\x1b[H", mode: ~AppCursor }
	- { key: End, mods: Alt, chars: "\x1b[1;3F" }
	- { key: End, chars: "\x1bOF", mode: AppCursor }
	- { key: End, chars: "\x1b[F", mode: ~AppCursor }
	- { key: PageUp, mods: Shift, action: ScrollPageUp, mode: ~Alt }
	- { key: PageUp, mods: Shift, chars: "\x1b[5;2~", mode: Alt }
	- { key: PageUp, mods: Control, chars: "\x1b[5;5~" }
	- { key: PageUp, mods: Alt, chars: "\x1b[5;3~" }
	- { key: PageUp, chars: "\x1b[5~" }
	- { key: PageDown, mods: Shift, action: ScrollPageDown, mode: ~Alt }
	- { key: PageDown, mods: Shift, chars: "\x1b[6;2~", mode: Alt }
	- { key: PageDown, mods: Control, chars: "\x1b[6;5~" }
	- { key: PageDown, mods: Alt, chars: "\x1b[6;3~" }
	- { key: PageDown, chars: "\x1b[6~" }
	- { key: Tab, mods: Shift, chars: "\x1b[Z" }
	- { key: Back, chars: "\x7f" }
	- { key: Back, mods: Alt, chars: "\x1b\x7f" }
	- { key: Insert, chars: "\x1b[2~" }
	- { key: Delete, chars: "\x1b[3~" }
	- { key: Left, mods: Shift, chars: "\x1b[1;2D" }
	- { key: Left, mods: Control, chars: "\x1b[1;5D" }
	- { key: Left, mods: Alt, chars: "\x1b[1;3D" }
	- { key: Left, chars: "\x1b[D", mode: ~AppCursor }
	- { key: Left, chars: "\x1bOD", mode: AppCursor }
	- { key: Right, mods: Shift, chars: "\x1b[1;2C" }
	- { key: Right, mods: Control, chars: "\x1b[1;5C" }
	- { key: Right, mods: Alt, chars: "\x1b[1;3C" }
	- { key: Right, chars: "\x1b[C", mode: ~AppCursor }
	- { key: Right, chars: "\x1bOC", mode: AppCursor }
	- { key: Up, mods: Shift, chars: "\x1b[1;2A" }
	- { key: Up, mods: Control, chars: "\x1b[1;5A" }
	- { key: Up, mods: Alt, chars: "\x1b[1;3A" }
	- { key: Up, chars: "\x1b[A", mode: ~AppCursor }
	- { key: Up, chars: "\x1bOA", mode: AppCursor }
	- { key: Down, mods: Shift, chars: "\x1b[1;2B" }
	- { key: Down, mods: Control, chars: "\x1b[1;5B" }
	- { key: Down, mods: Alt, chars: "\x1b[1;3B" }
	- { key: Down, chars: "\x1b[B", mode: ~AppCursor }
	- { key: Down, chars: "\x1bOB", mode: AppCursor }
	- { key: F1, chars: "\x1bOP" }
	- { key: F2, chars: "\x1bOQ" }
	- { key: F3, chars: "\x1bOR" }
	- { key: F4, chars: "\x1bOS" }
	- { key: F5, chars: "\x1b[15~" }
	- { key: F6, chars: "\x1b[17~" }
	- { key: F7, chars: "\x1b[18~" }
	- { key: F8, chars: "\x1b[19~" }
	- { key: F9, chars: "\x1b[20~" }
	- { key: F10, chars: "\x1b[21~" }
	- { key: F11, chars: "\x1b[23~" }
	- { key: F12, chars: "\x1b[24~" }
	- { key: F1, mods: Shift, chars: "\x1b[1;2P" }
	- { key: F2, mods: Shift, chars: "\x1b[1;2Q" }
	- { key: F3, mods: Shift, chars: "\x1b[1;2R" }
	- { key: F4, mods: Shift, chars: "\x1b[1;2S" }
	- { key: F5, mods: Shift, chars: "\x1b[15;2~" }
	- { key: F6, mods: Shift, chars: "\x1b[17;2~" }
	- { key: F7, mods: Shift, chars: "\x1b[18;2~" }
	- { key: F8, mods: Shift, chars: "\x1b[19;2~" }
	- { key: F9, mods: Shift, chars: "\x1b[20;2~" }
	- { key: F10, mods: Shift, chars: "\x1b[21;2~" }
	- { key: F11, mods: Shift, chars: "\x1b[23;2~" }
	- { key: F12, mods: Shift, chars: "\x1b[24;2~" }
	- { key: F1, mods: Control, chars: "\x1b[1;5P" }
	- { key: F2, mods: Control, chars: "\x1b[1;5Q" }
	- { key: F3, mods: Control, chars: "\x1b[1;5R" }
	- { key: F4, mods: Control, chars: "\x1b[1;5S" }
	- { key: F5, mods: Control, chars: "\x1b[15;5~" }
	- { key: F6, mods: Control, chars: "\x1b[17;5~" }
	- { key: F7, mods: Control, chars: "\x1b[18;5~" }
	- { key: F8, mods: Control, chars: "\x1b[19;5~" }
	- { key: F9, mods: Control, chars: "\x1b[20;5~" }
	- { key: F10, mods: Control, chars: "\x1b[21;5~" }
	- { key: F11, mods: Control, chars: "\x1b[23;5~" }
	- { key: F12, mods: Control, chars: "\x1b[24;5~" }
	- { key: F1, mods: Alt, chars: "\x1b[1;6P" }
	- { key: F2, mods: Alt, chars: "\x1b[1;6Q" }
	- { key: F3, mods: Alt, chars: "\x1b[1;6R" }
	- { key: F4, mods: Alt, chars: "\x1b[1;6S" }
	- { key: F5, mods: Alt, chars: "\x1b[15;6~" }
	- { key: F6, mods: Alt, chars: "\x1b[17;6~" }
	- { key: F7, mods: Alt, chars: "\x1b[18;6~" }
	- { key: F8, mods: Alt, chars: "\x1b[19;6~" }
	- { key: F9, mods: Alt, chars: "\x1b[20;6~" }
	- { key: F10, mods: Alt, chars: "\x1b[21;6~" }
	- { key: F11, mods: Alt, chars: "\x1b[23;6~" }
	- { key: F12, mods: Alt, chars: "\x1b[24;6~" }
	- { key: F1, mods: Super, chars: "\x1b[1;3P" }
	- { key: F2, mods: Super, chars: "\x1b[1;3Q" }
	- { key: F3, mods: Super, chars: "\x1b[1;3R" }
	- { key: F4, mods: Super, chars: "\x1b[1;3S" }
	- { key: F5, mods: Super, chars: "\x1b[15;3~" }
	- { key: F6, mods: Super, chars: "\x1b[17;3~" }
	- { key: F7, mods: Super, chars: "\x1b[18;3~" }
	- { key: F8, mods: Super, chars: "\x1b[19;3~" }
	- { key: F9, mods: Super, chars: "\x1b[20;3~" }
	- { key: F10, mods: Super, chars: "\x1b[21;3~" }
	- { key: F11, mods: Super, chars: "\x1b[23;3~" }
	- { key: F12, mods: Super, chars: "\x1b[24;3~" }
	- { key: NumpadEnter, chars: "\n" }