gistfile1.txt

Call wifi_connect
INFO - D (0) wifi:
INFO - clear blacklist
INFO - 

INFO - D (0) wifi:
INFO - Start wifi connect
INFO - 

INFO - D (0) wifi:
INFO - connect status 0 -> 0
INFO - 

INFO - D (0) wifi:
INFO - connect chan=0
INFO - 

INFO - V (0) wifi:
INFO - nvs=0, ssid=home, channel=255
INFO - 

INFO - V (0) wifi:
INFO - ssid=home match nvs 0, channel=255
INFO - 

INFO - D (0) wifi:
INFO - first chan=1
INFO - 

INFO - D (0) wifi:
INFO - connect status 0 -> 1
INFO - 

INFO - D (0) wifi:
INFO - filter: set rx policy=3
INFO - 

INFO - D (0) wifi:
INFO - clear scan ap list
INFO - 

INFO - D (0) wifi:
INFO - start scan: type=0x50f, priority=2, cb=0x420a1c12, arg=0x0, ss_state=0x01, time=5211844, index=0
0x420a1c12 - cnx_start_handoff_cb
    at ??:??
INFO - 

INFO - V (0) wifi:
INFO - inter_channel_timeout: arg=0x0, ss_state=0x01
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<1,0>, dur<10,20>
INFO - 

INFO - V (0) wifi:
INFO - change: chan<1,0>, dur<10,20>
INFO - 

INFO - V (0) wifi:
INFO - enter start op, arg=0x3fca0358
0x3fca0358 - .LANCHOR46
    at ??:??
INFO - 

INFO - V (0) wifi:
INFO - scan operation: state=0x03, chan<1,0>, arg=0x3fca0358, status=0
0x3fca0358 - .LANCHOR46
    at ??:??
INFO - 

INFO - V (0) wifi:
INFO - scan specific ssid=home
INFO - 

INFO - V (0) wifi:
INFO - start min timer
INFO - 

INFO - V (0) wifi:
INFO - start max timer
INFO - 

wifi_connect returned Ok(())
Ok(EnumSet(Client))
Status(Starting, Stopped)
Wait to get connected
INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x03
INFO - 

INFO - D (0) wifi:
INFO - perform scan: ss_state=0x09, chan<2,0>, dur<10,20>
INFO - 

INFO - V (0) wifi:
INFO - change: chan<2,0>, dur<10,20>
INFO - 

INFO - V (0) wifi:
INFO - ht20 freq=2417, chan=2
INFO - 

INFO - V (0) wifi:
INFO - enter start op, arg=0x3fca0358
0x3fca0358 - .LANCHOR46
    at ??:??
INFO - 

INFO - V (0) wifi:
INFO - scan operation: state=0x03, chan<2,0>, arg=0x3fca0358, status=0
0x3fca0358 - .LANCHOR46
    at ??:??
INFO - 

INFO - V (0) wifi:
INFO - scan specific ssid=home
INFO - 

INFO - V (0) wifi:
INFO - start min timer
INFO - 

INFO - V (0) wifi:
INFO - start max timer
INFO - 

INFO - D (0) wifi:
INFO - rsn valid: gcipher=3 ucipher=3 akm=5

INFO - 

INFO - D (0) wifi:
INFO - profile match: ss_state=0x07
INFO - 

INFO - V (0) wifi:
INFO - scan histroy table is not full yet, add
INFO - 

INFO - V (0) wifi:
INFO - add ssid=home, chan=1 to scan history
INFO - 

INFO - D (0) wifi:
INFO - scan end: arg=0x0, status=0, ss_state=0x07
INFO - 

INFO - D (0) wifi:
INFO - find first mathched ssid, scan done
INFO - 

INFO - V (0) wifi:
INFO - back home chan=<1,0>, current chan=<2,0>
INFO - 

INFO - V (0) wifi:
INFO - ht20 freq=2412, chan=1
INFO - 

INFO - D (0) wifi:
INFO - filter: set rx policy=4
INFO - 

INFO - D (0) wifi:
INFO - first chan=1
INFO - 

INFO - V (0) wifi:
INFO - scan_done: arg=0x0, status=0, cur_time=5907989, scan_id=128, scan state=00
INFO - 

INFO - V (0) wifi:
INFO - call scan_done cb, arg=0x0
INFO - 

INFO - D (0) wifi:
INFO - handoff_cb: status=0
INFO - 

INFO - V (0) wifi:
INFO - best bss has set.
INFO - 

INFO - D (0) wifi:
INFO - ap found, mac=a2:6c:ac:b9:0f:b8
INFO - 

INFO - V (0) wifi:
INFO - bssid=a2:6c:ac:b9:0f:b8, LR=0
INFO - 

INFO - D (0) wifi:
INFO - new_bss=0x3fca0570, cur_bss=0x0, new_chan=<1,0>, cur_chan=1
0x3fca0570 - g_cnxMgr
    at ??:??
INFO - 

INFO - D (0) wifi:
INFO - filter: set rx policy=5
INFO - 

INFO - I (0) wifi:
INFO - new:<1,0>, old:<1,0>, ap:<255,255>, sta:<1,0>, prof:1
INFO - 

INFO - D (0) wifi:
INFO - connect_op: status=0, auth=5, cipher=3 
INFO - 

INFO - D (0) wifi:
INFO - auth mode is not none
INFO - 

INFO - D (0) wifi:
INFO - connect_bss: auth=1, reconnect=0
INFO - 

INFO - I (0) wifi:
INFO - state: init -> auth (b0)
INFO - 

INFO - D (0) wifi:
INFO - start 1s AUTH timer
INFO - 

INFO - D (0) wifi:
INFO - clear scan ap list
INFO -