pick out different remotes example

infrared-with-light-case.ino

/*
 * IRremote: IRrecvDemo - demonstrates receiving IR codes with IRrecv
 * An IR detector/demodulator must be connected to the input RECV_PIN.
 * Version 0.1 July, 2009
 * Copyright 2009 Ken Shirriff
 * http://arcfn.com
 * modified for light indicator and response to different buttons JSCook 5/12/2020
 */

#include <IRremote.h>

int RECV_PIN = 11;

IRrecv irrecv(RECV_PIN);

decode_results results;

void setup()
{
  Serial.begin(9600);
  // In case the interrupt driver crashes on setup, give a clue
  // to the user what's going on.
  Serial.println("Enabling IRin");
  irrecv.enableIRIn(); // Start the receiver
  Serial.println("Enabled IRin");
  pinMode(LED_BUILTIN, OUTPUT);
}

void loop() {
  if (irrecv.decode(&results)) {
    digitalWrite(LED_BUILTIN, HIGH);
    Serial.println(results.value, HEX); //will tell you codes regardless of remote
    
    switch(results.value){
      case 0x100BCBD:{ //program in your particular buttons as needed
        Serial.println("Panasonic power button");
        break;
      }
      case 0xC1C7C03F:{ //program in your particular buttons as needed
        Serial.println("Canon start/stop button");
        break;
      }
      case 0x1009293:{ //program in your particular buttons as needed
        Serial.println("Panasonic OK button");
        break;
      }
      default: {
        Serial.println("Unknnown code");
        break;
      }
    }
  delay(250);
  irrecv.resume(); // Receive the next value
  digitalWrite(LED_BUILTIN, LOW);
}
}