English manual for the ZUOYA GMK67 Mechanical Keyboard. Made from the printed version (Original).
-
Key Features
- A knob
- Adjustable non-slip rubber feet
- All-keys anti ghosting
- Compatible with Windows & MAC OS
- Custom driver available
- Factory case foam
- Full RGB backlit with audio-sync function
- Hot-swappable PCB (5-pins slot)
- Plug & play mechanical keyboard
- Poron gasket structure
- Poron plate foam
- Prelubed stabilizers
- South facing RGB LED
- Trimode connection (USB Type-C / Bluetooth/ 2.4Ghz Wireless)
-
Commons Connectivity (Trimode)
- USB Type-C
- Bluetooth (3 channels)
- 2.4Ghz Wireless Connection (wireless dongle)
-
Switches
- Hot-swappable PCB
- Support for 3-pins / 5-pins switches
-
RGB Backlit
- South facing LED
- 20 preset RGB mode
- Audio visualizer mode
- RGB Customization ready (driver available)
-
Battery
- 3000Mah (15-20 hours / charging cycle)
-
Number of Keys
- 66 keys
-
Compatibility
- Windows
- MAC
-
Keyboard Bundle
- 1 x Zuoya GMK67 Trimode Mechanical Keyboard
- 1 x Type-C Cable
- 1 x 2.4Ghz Wireless Dongle
- 1 x Keyswitch Puller
FN+ ↑: RGB backlight brightness IncreaseFN+ ↓: RGB backlight brightness decreaseFN+ ←: Switch RGB dynamic backlight directionFN+ →: Switch RGB backlight colorFN+ [: RGB backlight speed decreaseFN+ ]: RGB backlight speed increaseFN+ \\: Toggle different RGB backlight modes totally 18 modes
Volume adjust, turn counterclockwise is volume down, rotate clockwise is volume up, press one time to mute.
| FN Combination Keys | WIN OS Mode | MAC OS Mode |
|---|---|---|
FN+ ESC |
` | ` |
FN+ 1! |
F1 | Screen Brightness - |
FN+ 2@ |
F2 | Screen Brightness + |
FN+ 3# |
F3 | Task |
FN+ 4$ |
F4 | Control Pad |
FN+ 5% |
F5 | N/A |
FN+ 6^ |
F6 | N/A |
FN+ 7& |
F7 | Previous Track |
FN+ 8* |
F8 | Play/Pause |
FN+ 9( |
F9 | Next Track |
FN+ 0) |
F10 | Mute |
FN+ -_ |
F11 | Volume- |
FN+ =+ |
F12 | Volume+ |
FN+ P |
PAUSE | F15 |
FN+ O |
SCROLL LOCK | F14 |
FN+ I |
PRTSCR | F13 |
FN+ DEL |
INSERT | N/A |
FN+ PGUP |
HOME | HOME |
FN+ PGDOWN |
END | END |
SHIFT+ ESC |
~ | ~ |
FN+ WIN |
Win lock | N/A |
FN+ BACKSPACE |
Long press for 3 seconds to reset the keyboard to the factory setting | Long press for 3 seconds to reset the keyboard to the factory setting |
Please toggle the mode switch to the middle wired mode, and then insert USB cable into your computer, the keyboard backlight lights on and turns to the default of RGB backlight effect, it means connection successful.
-
Please toggle the mode switch to the Bluetooth mode
-
Long press
FN+ Q/W/Efor 3-5 seconds to enter pairing mode, at this time, the device indicator flashes red/green/blue color quickly. Q W and E are selectors for each Bluetooth channel. -
Open the Bluetooth settings on your device and scan for available devices, Locate and select the "BT Keyboard" entry.
-
Once the keyboard has connected to your device, the indicator will cease flashing, indicating that Bluetooth pairing was successful. Short press "FN" and "Q" or "FN" and "W" or "FN" and "E" keys to switch paired Bluetooth device.
-
Please toggle the mode switch to 2.4Ghz mode
-
Plug in the receiver into your device. The device indicator is white color when the keyboard is under 2.4G mode.
-
Long press
FN+ Rkey enter 2.4g pairing mode. At this time, the device indicator flashes white color quickly. After the connection is successful, the device indicator stops blinking and goes to steady white color
After 5 minutes without a key press, the backlight will turn off to conserve battery. Any key press will be awaken the keyboard, After 30 minutes without a key press, the keyboard will entry deep sleep under Bluetooth mode, Bluetooth disconnect, any key press will reconnect the keyboard.
| Mode | Key | Keys lit up |
|---|---|---|
| FPS Game | FN+ Z |
W A S D ↑ ↓ ↑ → |
| LOL | FN+ X |
Q W E R D G F B V (Left Ctrl) (Left Alt) Tab Space (1-6) Esc |
| Office Mode (37 keys) | FN+ C |
(A-Z) [ ] ; ' , . / ↑ ↓ ↑ → |
| Custom mode | FN+ Left Shift |
Continuously press the same button to specify the color, apply to other keys as desired. To save the custom lights, press FN+ Left Shift again. |
FN key will blink red repeatedly when the keyboard is low on battery (battery voltage less than 3.5V). It is always red light when charging, it's turns to the green light after fully charged.
No driver needed.
The software allow for color and mode customizations, macros, key remaps, shortcuts and firmware updates.
Known working links for download:
Has anyone had any cases where the keys do not work at all? for example, my X, 4 & 6 keys do not work at all?