Terminal Window log

terminal.log

Recv: ok
Send: N94466 G1 X122.989 Y87.579 E0.0001*103
Recv: ok
Send: N94467 G1 X122.984 Y87.590 E0.0005*104
Recv: ok
Send: N94468 G1 X122.982 Y87.594 E0.0002*98
Recv: ok
Send: N94469 G1 X122.981 Y87.596 E0.0001*97
Recv: ok
Send: N94470 G1 X122.930 Y87.679 E0.0039*106
Recv: ok
Send: N94471 G1 X122.829 Y87.848 E0.0079*106
Recv: ok
Send: N94472 G1 X122.825 Y87.853 E0.0002*99
Recv: ok
Send: N94473 G1 X122.823 Y87.855 E0.0001*97
Recv: ok
Send: N94474 G1 X122.820 Y87.859 E0.0002*106
Recv: ok
Send: N94475 G1 X122.819 Y87.861 E0.0001*105
Recv: ok
Send: N94476 G1 X122.808 Y87.874 E0.0007*104
Recv: ok
Send: N94477 G1 X117.091 Y82.157 E0.3259*96
Recv: ok
Send: N94478 G1 X117.249 Y82.993 E0.0343*97
Recv: ok
Send: N94479 G1 X122.484 Y88.229 E0.2985*99
Recv: ok
Send: N94480 G1 X122.147 Y88.571 E0.0194*111
Recv: ok
Send: N94481 G1 X117.406 Y83.830 E0.2703*97
Recv: ok
Send: N94482 G1 X117.564 Y84.666 E0.0343*111
Recv: ok
Send: N94483 G1 X121.717 Y88.819 E0.2368*108
Recv: ok
Send: N94484 G1 X121.038 Y88.819 E0.0274*111
Recv: ok
Send: N94485 G1 X117.721 Y85.502 E0.1891*110
Recv: ok
Send: N94486 G1 X117.745 Y85.630 E0.0052*107
Recv: ok
Send: N94487 G1 X117.589 Y85.756 E0.0081*103
Recv: ok
Send: N94488 G1 X117.587 Y85.758 E0.0001*96
Recv: ok
Send: N94489 G1 X117.441 Y85.875 E0.0076*106
Recv: ok
Send: N94490 G1 X117.439 Y85.878 E0.0001*96
Recv: ok
Send: N94491 G1 X117.431 Y85.891 E0.0006*105
Recv: ok
Send: N94492 G1 X120.359 Y88.819 E0.1669*100
Recv: ok
Send: N94493 G1 X119.680 Y88.819 E0.0274*103
Recv: ok
Send: N94494 G1 X117.178 Y86.317 E0.1426*101
Recv: ok
Send: N94495 G1 X117.144 Y86.692 E0.0152*100
Recv: ok
Send: N94496 G1 X117.145 Y86.694 E0.0001*103
Recv: ok
Send: N94497 G1 X117.144 Y86.699 E0.0002*105
Recv: ok
Recv: ok
Send: N94498 M105*47
Send: N94499 G1 X117.144 Y86.701 E0.0001*100
Recv: ok T:205.1 /205.0 B:60.1 /60.0 T0:205.1 /205.0 @:92 B@:39
Send: N94500 G1 X117.144 Y86.707 E0.0003*97
Recv: ok
Send: N94501 G1 X117.143 Y86.714 E0.0002*100
Recv: ok
Send: N94502 G1 X117.156 Y86.898 E0.0075*104
Recv: ok
Send: N94503 G1 X117.161 Y86.979 E0.0032*96
Recv: ok
Send: N94504 G1 X119.001 Y88.819 E0.1049*106
Recv: ok
Send: N94505 G1 E-0.6000 F2100*16
Recv: ok
Send: N94506 G1 Z15.912 F1002*41
Recv: ok
Send: N94507 G1 X108.256 Y86.899 F6000*120
Recv: ok
Send: N94508 G1 Z15.732 F1002*43
Recv: ok
Send: N94509 G1 E0.6000 F2100*49
Recv: ok
Send: N94510 G1 X110.177 Y88.819 E0.1095 F3840*14
Recv: ok
Send: N94511 G1 X110.855 Y88.819 E0.0274*99
Recv: ok
Send: N94512 G1 X108.301 Y86.265 E0.1456*107
Recv: ok
Send: N94513 G1 X108.368 Y86.156 E0.0051*100
Recv: ok
Send: N94514 G1 X108.371 Y86.151 E0.0002*106
Recv: ok
Send: N94515 G1 X108.538 Y85.880 E0.0128*111
Recv: ok
Send: N94516 G1 X108.540 Y85.877 E0.0001*97
Recv: ok
Send: N94517 G1 X108.541 Y85.875 E0.0001*99
Recv: ok
Send: N94518 G1 X108.568 Y85.853 E0.0014*103
Recv: ok
Send: N94519 G1 X111.534 Y88.819 E0.1691*110
Recv: ok
Send: N94520 G1 X112.213 Y88.819 E0.0274*107
Recv: ok
Send: N94521 G1 X108.804 Y85.410 E0.1944*108
Recv: ok
Send: N94522 G1 X108.646 Y84.573 E0.0343*110
Recv: ok
Send: N94523 G1 X112.892 Y88.819 E0.2420*110
Recv: ok
Send: N94524 G1 X113.003 Y88.819 E0.0045*109
Recv: ok
Send: N94525 G1 X113.240 Y88.577 E0.0137*104
Recv: ok
Send: N94526 G1 X113.284 Y88.533 E0.0025*97
Recv: ok
Send: N94527 G1 X108.489 Y83.737 E0.2734*105
Recv: ok
Send: N94528 G1 X108.331 Y82.900 E0.0343*111
Recv: ok
Send: N94529 G1 X113.621 Y88.191 E0.3016*106
Recv: ok
Send: N94530 G1 X113.753 Y88.057 E0.0076*104
Recv: ok
Send: N94531 G1 X113.772 Y88.034 E0.0012*109
Recv: ok
Send: N94532 G1 X113.919 Y87.860 E0.0092*99
Recv: ok
Send: N94533 G1 X113.920 Y87.859 E0.0001*104
Recv: ok
Send: N94534 G1 X113.923 Y87.855 E0.0002*99
Recv: ok
Send: N94535 G1 X113.925 Y87.853 E0.0001*97
Recv: ok
Send: N94536 G1 X113.928 Y87.848 E0.0002*102
Recv: ok
Send: N94537 G1 X113.939 Y87.830 E0.0009*99
Recv: ok
Send: N94538 G1 X108.173 Y82.064 E0.3287*107
Recv: ok
Send: N94539 G1 X108.016 Y81.228 E0.0343*107
Recv: ok
Send: N94540 G1 X114.170 Y87.381 E0.3508*103
Recv: ok
Send: N94541 G1 X114.193 Y87.323 E0.0025*106
Recv: ok
Send: N94542 G1 X114.196 Y87.315 E0.0003*109
Recv: ok
Send: N94543 G1 X114.197 Y87.313 E0.0001*105
Recv: ok
Recv: ok
Send: N94544 G1 X114.198 Y87.310 E0.0001*98
Send: N94545 G1 X114.239 Y87.132 E0.0074*107
Recv: ok
Send: N94546 G1 X114.265 Y87.027 E0.0044*103
Recv: ok
Send: N94547 G1 X114.265 Y87.025 E0.0001*101
Recv: ok
Send: N94548 G1 X114.265 Y87.022 E0.0001*109
Recv: ok
Send: N94549 G1 X114.266 Y87.020 E0.0001*109
Recv: ok
Send: N94550 G1 X114.266 Y87.016 E0.0001*96
Recv: ok
Send: N94551 G1 X114.280 Y86.827 E0.0077*99
Recv: ok
Send: N94552 G1 X114.281 Y86.814 E0.0005*100
Recv: ok
Send: N94553 G1 X107.850 Y80.383 E0.3666*98
Recv: ok
Send: N94554 M204 S2000*93
Recv: ok
Send: N94555 G1 X107.533 Y81.255 F6000*121
Recv: ok
Send: N94556 G1 X105.407 Y84.936 E0.1714 F4800*7
Recv: ok
Send: N94557 G1 E-0.6000 F2100*23
Recv: ok
Send: N94558 G1 Z15.912 F1002*34
Recv: ok
Send: N94559 G1 X116.681 Y87.000 F6000*123
Recv: ok
Send: N94560 G1 Z15.732 F1002*37
Recv: ok
Send: N94561 G1 E0.6000 F2100*63
Recv: ok
Send: N94562 G1 X114.749 Y87.000 E0.0779 F4800*12
Recv: ok
Send: N94563 G1 X114.742 Y87.089 E0.0036*97
Recv: ok
Send: N94564 G1 X114.742 Y87.091 E0.0001*107
Recv: ok
Send: N94565 G1 X114.741 Y87.093 E0.0001*107
Recv: ok
Send: N94566 G1 X114.741 Y87.095 E0.0001*110
Recv: ok
Send: N94567 G1 X114.741 Y87.097 E0.0001*109
Recv: ok
Send: N94568 G1 X114.741 Y87.098 E0.0001*109
Recv: ok
Send: N94569 G1 X114.740 Y87.101 E0.0001*108
Recv: ok
Send: N94570 G1 X114.707 Y87.241 E0.0058*108
Recv: ok
Send: N94571 G1 X114.657 Y87.456 E0.0089*101
Recv: ok
Send: N94572 G1 X114.655 Y87.460 E0.0002*98
Recv: ok
Send: N94573 G1 X114.655 Y87.462 E0.0001*98
Recv: ok
Send: N94574 G1 X114.652 Y87.468 E0.0002*107
Recv: ok
Send: N94575 G1 X114.524 Y87.784 E0.0138*97
Recv: ok
Send: N94576 G1 X114.521 Y87.791 E0.0002*107
Recv: ok
Send: N94577 G1 X114.520 Y87.793 E0.0001*106
Recv: ok
Send: N94578 G1 X114.515 Y87.805 E0.0005*103
Recv: ok
Recv: ok
Send: N94579 G1 X114.512 Y87.810 E0.0002*98
Send: N94580 G1 X114.511 Y87.813 E0.0002*100
Recv: ok
Send: N94581 G1 X114.441 Y87.928 E0.0054*107
Recv: ok
Send: N94582 G1 X114.320 Y88.129 E0.0095*99
Recv: ok
Send: N94583 G1 X114.316 Y88.134 E0.0003*100
Recv: ok
Send: N94584 G1 X114.314 Y88.137 E0.0002*99
Recv: ok
Send: N94585 G1 X114.311 Y88.140 E0.0002*103
Recv: ok
Send: N94586 G1 X114.139 Y88.344 E0.0107*110
Recv: ok
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: ok
Send: N94588 G1 X113.582 Y88.914 E0.0302*107
Recv: ok
Send: N94589 G1 X113.204 Y89.299 E0.0218*102
Recv: Error:checksum mismatch, Last Line: 94587
Recv: Resend: 94588
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N94587 G1 X114.108 Y88.380 E0.0019*107
Recv: Error:Line Number is not Last Line Number+1, Last Line: 94587
Recv: Resend: 94588