Last active
July 13, 2024 03:12
-
-
Save JohnScottUK/de30eb8c22993c4405e6afbd9b5db113 to your computer and use it in GitHub Desktop.
Ender 3 S1 Pro Optimal Start/Stop GCode for OrcaSlicer Software.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
; Creality Ender-3 S1 Pro Optimal Start GCode for OrcaSlicer Software. | |
; By John Scott, 2023. https://gist.github.com/JohnScottUK/de30eb8c22993c4405e6afbd9b5db113 | |
;M117 Set Movement... | |
G90; Use absolute positioning. | |
;M117 Heating Bed... | |
M140 S[bed_temperature_initial_layer_single]; Start heating bed. | |
;M117 Homing Axis... | |
G28; Home all axis to know where everything is. | |
; Bed Mesh - Use one of M420 or G29. Uncomment if/as required. | |
;M420 S1 Z10; Use saved bed mesh, fading out over 10 layers. Quicker and reduced machine wear. | |
; Alternative - Generate new bed mesh this print. | |
;M117 Awaiting Bed+Nozzle... | |
;M104 S150; Start pre-heating nozzle without oozing filament. | |
;M190 S[bed_temperature_initial_layer_single]; Wait for bed temperature when creating new bed mesh. | |
;M109 S150; Wait for hotend pre-heat temperature to create new bed mesh with everything warm. | |
;M117 Generating Bed Mesh... | |
;G29; Create new bed mesh for this print. | |
;M117 Ready Nozzle... | |
G1 Z2.0 F3000; Move Z Axis up to avoid bed. | |
G1 X2.0 Y10 F5000; Move above purge-line start, so any hotend oozing is out the way. | |
G1 Z0.28; Drop and wait for temperature. | |
;M117 Awaiting Bed+Nozzle... | |
M104 S150; Start pre-heating nozzle without oozing filament. | |
M190 S[bed_temperature_initial_layer_single]; Wait for bed temperature before printing. | |
M109 S[nozzle_temperature_initial_layer]; Set and wait for nozzle to reach temperature. | |
;M117 Purging Nozzle... | |
G92 E0; Reset extruder. | |
G1 X2.0 Y140 Z0.28 F1500 E10; Draw the first line. | |
G1 X2.3 Y140 Z0.28 F5000; Move to side a little. | |
G1 X2.3 Y10 Z0.28 F1500 E20; Draw the second line. | |
;M117 Printing... |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
; Creality Ender-3 S1 Pro Optimal End GCode for OrcaSlicer Software. | |
; By John Scott, 2023. https://gist.github.com/JohnScottUK/de30eb8c22993c4405e6afbd9b5db113 | |
;M117 Printing Finished... | |
G91; Relative positioning. | |
G1 Z0.2 E-2 F2400; Retract extruder a little and raise Z. | |
G1 X5 Y5 F3000; Wipe out. | |
G1 Z10; Raise Z more. | |
;M117 Presenting Print... | |
G90; Absolute positioning. | |
G1 X0 Y200; Present print. | |
;M117 Stopping... | |
M140 S0; Turn off bed. | |
M104 S0; Turn off hotend. | |
M106 S0; Turn off fan. | |
M84; Disable all steppers. | |
;M117 Printing Complete. |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
; Sonic Pad Ender-3 S1 Pro Optimal Start GCode for OrcaSlicer Software. | |
; By John Scott, 2023. https://gist.github.com/JohnScottUK/8acd76895716b3abda4fde270738daf3 | |
; Set Movement... | |
G90; Use absolute positioning. | |
; Heat Bed... | |
M140 S[bed_temperature_initial_layer_single]; Start heating bed. | |
; Home Axis... | |
G28; Home all axis to know where everything is. | |
; Bed Mesh - Use one of CALIBRATE or PROFILE LOAD. Uncomment if/as required. | |
;M104 S150; Start pre-heating hotend without oozing filament. | |
;M190 S[bed_temperature_initial_layer_single]; Wait for bed temperature when creating new bed mesh. | |
;M109 S150; Wait for hotend pre-heat temperature to create new bed mesh with everything warm. | |
;BED_MESH_CALIBRATE | |
;BED_MESH_PROFILE LOAD=default | |
; Ready Nozzle... | |
G1 Z2.0 F3000; Move Z Axis up to avoid bed. | |
G1 X2.0 Y10 F5000; Move above purge-line start, so any hotend oozing is out the way. | |
G1 Z0.28; Drop and wait for temperature. | |
; Await Bed+Nozzle... | |
M104 S150; Start pre-heating hotend without oozing filament. | |
M190 S[bed_temperature_initial_layer_single]; Wait for bed temperature before printing. | |
M109 S[nozzle_temperature_initial_layer]; Set and wait for hotend to reach temperature. | |
; Purge Nozzle... | |
G92 E0; Reset extruder. | |
G1 X2.0 Y140 Z0.28 F1500 E10; Draw the first line. | |
G1 X2.3 Y140 Z0.28 F5000; Move to side a little. | |
G1 X2.3 Y10 Z0.28 F1500 E20; Draw the second line. | |
; Print... |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
; Sonic Pad Ender-3 S1 Pro Optimal End GCode for OrcaSlicer Software. | |
; By John Scott, 2023. https://gist.github.com/JohnScottUK/8acd76895716b3abda4fde270738daf3 | |
; Print Finished... | |
G91; Relative positioning. | |
G1 Z0.2 E-2 F2400; Retract extruder a little and raise Z. | |
G1 X5 Y5 F3000; Wipe out. | |
G1 Z10; Raise Z more. | |
; Present Print... | |
G90; Absolute positioning. | |
G1 X0 Y200; Present print. | |
; Stop... | |
M140 S0; Turn off bed. | |
M104 S0; Turn off hotend. | |
M106 S0; Turn off fan. | |
M84; Disable all steppers. | |
; Print Complete. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment