Skip to content

Instantly share code, notes, and snippets.

@JokerGermany

JokerGermany/panic

Created November 12, 2020 09:17
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save JokerGermany/bee4447fd9f40681d817dddd4319aaa5 to your computer and use it in GitHub Desktop.
Save JokerGermany/bee4447fd9f40681d817dddd4319aaa5 to your computer and use it in GitHub Desktop.
Download ZIP
Panic Freetz FB7590 7.21 v2
Raw
panic
UPTIME: 136
(0 d 0 h 2 min 16 s - panic on Thu Jan 01 00:02:16 1970 UTC )
Irregular Reboots: SUM(2) - PANIC(2) (since last regular reboot/power-cut)
HW: 226.4
FW: 07.21
Bootloader: 1.3578
PANIC LOG VERSION 3.0
Panic#1 Part1
<7>[ 2.155624] phy phy-18000000.pciephy.1: Looking up phy-supply from device tree
<7>[ 2.155634] phy phy-18000000.pciephy.1: Looking up phy-supply property in node /pciephy@18000000 failed
<6>[ 2.155747] intel-pcie-slim-phy 18000000.pciephy: PCIe slim phy[1] init success!
<7>[ 2.163125] phy phy-18a00000.pciephy.2: Looking up phy-supply from device tree
<7>[ 2.163135] phy phy-18a00000.pciephy.2: Looking up phy-supply property in node /pciephy@18a00000 failed
<6>[ 2.163248] intel-pcie-slim-phy 18a00000.pciephy: PCIe slim phy[2] init success!
<7>[ 2.170938] ltq-grx500-phy 1a400000.phy: Looking up vbus-supply from device tree
<7>[ 2.170952] ltq-grx500-phy 1a400000.phy: Looking up vbus-supply property in node /ssx2@1a000000/phy@400000 failed
<4>[ 2.170964] 1a400000.phy supply vbus not found, using dummy regulator
<7>[ 2.177467] phy phy-1a400000.phy.3: Looking up phy-supply from device tree
<7>[ 2.177477] phy phy-1a400000.phy.3: Looking up phy-supply property in node /ssx2@1a000000/phy@400000 failed
<7>[ 2.177673] ltq-grx500-phy 1a600000.phy: Looking up vbus-supply from device tree
<7>[ 2.177682] ltq-grx500-phy 1a600000.phy: Looking up vbus-supply property in node /ssx2@1a000000/phy@600000 failed
<4>[ 2.177688] 1a600000.phy supply vbus not found, using dummy regulator
<7>[ 2.184158] phy phy-1a600000.phy.4: Looking up phy-supply from device tree
<7>[ 2.184170] phy phy-1a600000.phy.4: Looking up phy-supply property in node /ssx2@1a000000/phy@600000 failed
<7>[ 2.184729] pinctrl core: add 2 pinctrl maps
<7>[ 2.184771] intel-pinctrl 16c80000.pinctrl: found group selector 3 for dectrd
<7>[ 2.184781] intel-pinctrl 16c80000.pinctrl: found group selector 3 for dectrd
<7>[ 2.184798] intel-pinctrl 16c80000.pinctrl: request pin 35 (io-35) for avm-gpio:gpio_avm_dect_rd
<7>[ 2.184808] intel-pinctrl 16c80000.pinctrl: set mux group name: dectrd, pin num: 1
<7>[ 2.184852] avm,avm_gpio_generic avm-gpio:gpio_avm_dect_rd: obtain a copy of previously claimed pinctrl
<7>[ 2.184897] intel-pinctrl 16c80000.pinctrl: request pin 35 (io-35) for gpiochip1:451
<7>[ 2.184950] pinctrl core: add 2 pinctrl maps
<7>[ 2.184966] intel-pinctrl 16c80000.pinctrl: found group selector 5 for tdmfsc
<7>[ 2.184989] intel-pinctrl 16c80000.pinctrl: found group selector 5 for tdmfsc
<7>[ 2.185048] pinctrl core: add 2 pinctrl maps
<7>[ 2.185062] intel-pinctrl 16c80000.pinctrl: found group selector 5 for tdmfsc
<7>[ 2.185070] intel-pinctrl 16c80000.pinctrl: found group selector 5 for tdmfsc
<7>[ 2.185096] intel-pinctrl 16c80000.pinctrl: request pin 28 (io-28) for gpiochip0:508
<7>[ 2.185130] pinctrl core: add 2 pinctrl maps
<7>[ 2.185145] intel-pinctrl 16c80000.pinctrl: found group selector 7 for tdmdcl
<7>[ 2.185154] intel-pinctrl 16c80000.pinctrl: found group selector 7 for tdmdcl
<7>[ 2.185194] pinctrl core: add 2 pinctrl maps
<7>[ 2.185209] intel-pinctrl 16c80000.pinctrl: found group selector 7 for tdmdcl
<7>[ 2.185218] intel-pinctrl 16c80000.pinctrl: found group selector 7 for tdmdcl
<7>[ 2.185240] intel-pinctrl 16c80000.pinctrl: request pin 31 (io-31) for gpiochip0:511
<7>[ 2.185294] intel-pinctrl 16c80000.pinctrl: request pin 43 (io-43) for gpiochip1:459
<7>[ 2.185347] intel-pinctrl 16c80000.pinctrl: request pin 0 (io-0) for gpiochip0:480
<7>[ 2.185400] intel-pinctrl 16c80000.pinctrl: request pin 17 (io-17) for gpiochip0:497
<7>[ 2.185452] intel-pinctrl 16c80000.pinctrl: request pin 15 (io-15) for gpiochip0:495
<7>[ 2.185505] intel-pinctrl 16c80000.pinctrl: request pin 18 (io-18) for gpiochip0:498
<7>[ 2.185558] intel-pinctrl 16c80000.pinctrl: request pin 36 (io-36) for gpiochip1:452
<7>[ 2.185611] intel-pinctrl 16c80000.pinctrl: request pin 42 (io-42) for gpiochip1:458
<7>[ 2.185671] intel-pinctrl 16c80000.pinctrl: request pin 34 (io-34) for gpiochip1:450
<7>[ 2.185739] intel-pinctrl 16c80000.pinctrl: request pin 32 (io-32) for gpiochip1:448
<7>[ 2.185796] intel-pinctrl 16c80000.pinctrl: request pin 2 (io-2) for gpiochip0:482
<7>[ 2.185850] intel-pinctrl 16c80000.pinctrl: request pin 1 (io-1) for gpiochip0:481
<7>[ 2.186922] intel-pinctrl 16c80000.pinctrl: request pin 9 (io-9) for gpiochip0:489
<6>[ 2.291614] OF: PCI: host bridge /pcie@18900000 ranges:
<6>[ 2.296745] OF: PCI: MEM 0xb8000000..0xbaffffff -> 0xb8000000
<6>[ 2.302690] OF: PCI: IO 0xbb800000..0xbb80ffff -> 0xbb800000
<6>[ 2.311011] intel-pcie-slim-phy 18500000.pciephy: PCIe LCPLL SSC Mode Enabled
<6>[ 2.450495] intel-pcie 18900000.pcie: PCI host bridge to bus 0000:00
<6>[ 2.456737] pci_bus 0000:00: root bus resource [bus 00-08]
<6>[ 2.462244] pci_bus 0000:00: root bus resource [mem 0xb8000000-0xbaffffff]
<6>[ 2.469185] pci_bus 0000:00: root bus resource [io 0xbb800000-0xbb80ffff]
<7>[ 2.476174] pci 0000:00:00.0: [1bef:0030] type 01 class 0x060400
<7>[ 2.476293] pci 0000:00:00.0: supports D1 D2
<7>[ 2.476301] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
<6>[ 2.476531] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
<7>[ 2.484595] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
<7>[ 2.484648] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
<7>[ 2.484802] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
<6>[ 2.485048] pci 0000:00:00.0: PCI bridge to [bus 01-08]
<7>[ 2.490142] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
<7>[ 2.490152] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
<7>[ 2.490162] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff pref]
<7>[ 2.490176] pci_bus 0000:01: busn_res: [bus 01-08] end is updated to 01
<6>[ 2.490402] pci 0000:00:00.0: BAR 8: assigned [mem 0xb8000000-0xb81fffff]
<6>[ 2.497042] pci 0000:00:00.0: BAR 9: assigned [mem 0xb8200000-0xb82fffff pref]
<6>[ 2.504335] pci 0000:00:00.0: BAR 7: assigned [io 0xbb800000-0xbb800fff]
<6>[ 2.511198] pci 0000:01:00.0: BAR 0: assigned [mem 0xb8000000-0xb81fffff 64bit]
<6>[ 2.518577] pci 0000:00:00.0: PCI bridge to [bus 01]
<6>[ 2.523595] pci 0000:00:00.0: bridge window [io 0xbb800000-0xbb800fff]
<6>[ 2.530453] pci 0000:00:00.0: bridge window [mem 0xb8000000-0xb81fffff]
<6>[ 2.537310] pci 0000:00:00.0: bridge window [mem 0xb8200000-0xb82fffff pref]
<7>[ 2.544677] pcieport 0000:00:00.0: no of_node; not parsing pinctrl DT
<6>[ 2.544738] pcieport 0000:00:00.0: enabling device (0000 -> 0003)
<6>[ 2.550968] intel-pcie 18900000.pcie: Intel AXI PCIe Root Complex Port 0 Init Done
<7>[ 2.558710] intel-pinctrl 16c80000.pinctrl: request pin 8 (io-8) for gpiochip0:488
<6>[ 2.663605] OF: PCI: host bridge /pcie@18400000 ranges:
<6>[ 2.668710] OF: PCI: MEM 0xb4000000..0xb6ffffff -> 0xb4000000
<6>[ 2.674674] OF: PCI: IO 0xb7800000..0xb780ffff -> 0xb7800000
<6>[ 2.681767] intel-pcie-slim-phy 18000000.pciephy: SSC has been enabled, count: 2!
<6>[ 2.822531] intel-pcie 18400000.pcie: PCI host bridge to bus 0001:00
<6>[ 2.828766] pci_bus 0001:00: root bus resource [bus 00-08]
<6>[ 2.834279] pci_bus 0001:00: root bus resource [mem 0xb4000000-0xb6ffffff]
<6>[ 2.841221] pci_bus 0001:00: root bus resource [io 0xb7800000-0xb780ffff]
<7>[ 2.848207] pci 0001:00:00.0: [1bef:0030] type 01 class 0x060400
<7>[ 2.848321] pci 0001:00:00.0: supports D1 D2
<7>[ 2.848329] pci 0001:00:00.0: PME# supported from D0 D1 D3hot D3cold
<6>[ 2.848572] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
<7>[ 2.856657] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
<7>[ 2.856709] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
<7>[ 2.856860] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
<6>[ 2.857093] pci 0001:00:00.0: PCI bridge to [bus 01-08]
<7>[ 2.862188] pci 0001:00:00.0: bridge window [io 0x0000-0x0fff]
<7>[ 2.862199] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff]
<7>[ 2.862208] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff pref]
<7>[ 2.862222] pci_bus 0001:01: busn_res: [bus 01-08] end is updated to 01
<6>[ 2.862476] pci 0001:00:00.0: BAR 8: assigned [mem 0xb4000000-0xb41fffff]
<6>[ 2.869114] pci 0001:00:00.0: BAR 9: assigned [mem 0xb4200000-0xb42fffff pref]
<6>[ 2.876406] pci 0001:00:00.0: BAR 7: assigned [io 0xb7800000-0xb7800fff]
<6>[ 2.883266] pci 0001:01:00.0: BAR 0: assigned [mem 0xb4000000-0xb41fffff 64bit]
<6>[ 2.890647] pci 0001:00:00.0: PCI bridge to [bus 01]
<6>[ 2.895666] pci 0001:00:00.0: bridge window [io 0xb7800000-0xb7800fff]
<6>[ 2.902523] pci 0001:00:00.0: bridge window [mem 0xb4000000-0xb41fffff]
<6>[ 2.909380] pci 0001:00:00.0: bridge window [mem 0xb4200000-0xb42fffff pref]
<7>[ 2.916747] pcieport 0001:00:00.0: no of_node; not parsing pinctrl DT
<6>[ 2.916807] pcieport 0001:00:00.0: enabling device (0000 -> 0003)
<6>[ 2.923033] intel-pcie 18400000.pcie: Intel AXI PCIe Root Complex Port 1 Init Done
<7>[ 2.930788] intel-pinctrl 16c80000.pinctrl: request pin 16 (io-16) for gpiochip0:496
<6>[ 3.035606] OF: PCI: host bridge /pcie@18e00000 ranges:
<6>[ 3.040709] OF: PCI: MEM 0xbc000000..0xbeffffff -> 0xbc000000
<6>[ 3.046675] OF: PCI: IO 0xbf800000..0xbf80ffff -> 0xbf800000
<6>[ 3.053769] intel-pcie-slim-phy 18a00000.pciephy: SSC has been enabled, count: 3!
<6>[ 3.181881] intel-pcie 18e00000.pcie: PCI host bridge to bus 0002:00
<6>[ 3.188121] pci_bus 0002:00: root bus resource [bus 00-08]
<6>[ 3.193634] pci_bus 0002:00: root bus resource [mem 0xbc000000-0xbeffffff]
<6>[ 3.200576] pci_bus 0002:00: root bus resource [io 0xbf800000-0xbf80ffff]
<7>[ 3.207587] pci 0002:00:00.0: [1bef:0030] type 01 class 0x060400
<7>[ 3.207698] pci 0002:00:00.0: supports D1 D2
<7>[ 3.207706] pci 0002:00:00.0: PME# supported from D0 D1 D3hot D3cold
<6>[ 3.207943] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
<7>[ 3.216004] pci 0002:01:00.0: [8086:09a9] type 00 class 0x028000
<7>[ 3.216052] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x007fffff]
<7>[ 3.216208] pci 0002:01:00.0: supports D1 D2
<7>[ 3.216217] pci 0002:01:00.0: PME# supported from D0 D1 D3hot D3cold
<6>[ 3.216460] pci 0002:00:00.0: PCI bridge to [bus 01-08]
<7>[ 3.221557] pci 0002:00:00.0: bridge window [io 0x0000-0x0fff]
<7>[ 3.221567] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff]
<7>[ 3.221577] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff pref]
<7>[ 3.221590] pci_bus 0002:01: busn_res: [bus 01-08] end is updated to 01
<6>[ 3.221878] pci 0002:00:00.0: BAR 8: assigned [mem 0xbc000000-0xbc7fffff]
<6>[ 3.228511] pci 0002:00:00.0: BAR 9: assigned [mem 0xbc800000-0xbc8fffff pref]
<6>[ 3.235803] pci 0002:00:00.0: BAR 7: assigned [io 0xbf800000-0xbf800fff]
<6>[ 3.242663] pci 0002:01:00.0: BAR 0: assigned [mem 0xbc000000-0xbc7fffff]
<6>[ 3.249516] pci 0002:00:00.0: PCI bridge to [bus 01]
<6>[ 3.254543] pci 0002:00:00.0: bridge window [io 0xbf800000-0xbf800fff]
<6>[ 3.261401] pci 0002:00:00.0: bridge window [mem 0xbc000000-0xbc7fffff]
<6>[ 3.268257] pci 0002:00:00.0: bridge window [mem 0xbc800000-0xbc8fffff pref]
<7>[ 3.275631] pcieport 0002:00:00.0: no of_node; not parsing pinctrl DT
<6>[ 3.275692] pcieport 0002:00:00.0: enabling device (0000 -> 0003)
<6>[ 3.281909] intel-pcie 18e00000.pcie: Intel AXI PCIe Root Complex Port 2 Init Done
<6>[ 3.291257] UMT initialize success on processor: 0 !
<6>[ 3.296107] HW MCPY driver: Version: 1.1.0, Init Done!
<6>[ 3.302302] 16600000.serial: ttyLTQ0 at MMIO 0x16600000 (irq = 210, base_baud = 0) is a lantiq,asc
<6>[ 3.311417] console [ttyLTQ0] enabled
<6>[ 3.318617] bootconsole [early0] disabled
<6>[ 3.328035] avm_net_trace: Up and running.
<6>[ 3.331272] [loadcontrol] set auto - scale=1
<4>[ 3.334970] [avm] configured: watchdog event debug
<4>[ 3.339625]
<6>[ 3.341082] AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0)
<3>[ 3.348407] [grx:watchdog] start on cpu0
<3>[ 3.351743] [grx:watchdog] start on cpu1
<3>[ 3.355591] [grx:watchdog] start on cpu2
<3>[ 3.359494] [grx:watchdog] start on cpu3
<6>[ 3.363713] Register push button event to receive the set_factory_kernel event
<6>[ 3.385241] zram: Added device: zram0
<6>[ 3.389418] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xdc
<6>[ 3.394353] nand: Macronix MX30LF4GE8AB
<6>[ 3.398147] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
<3>[ 3.405708] macronix_nand_ecc_init: enabling ECC (hidden_ecc: 0):
<6>[ 3.411774] nand_avm_init_fixup: applying nand options fixup
<6>[ 3.417427] Scanning device for bad blocks
<5>[ 4.070415] 5 ofpart partitions found on MTD device 17c00000.nand-parts
<5>[ 4.075575] Creating 5 MTD partitions on "17c00000.nand-parts":
<5>[ 4.081484] 0x000000500000-0x000000d00000 : "kernel"
<5>[ 4.088581] 0x000000000000-0x000000100000 : "urlader"
<5>[ 4.093985] 0x000000100000-0x000000500000 : "nand-tffs"
<5>[ 4.099666] 0x000000d00000-0x000001500000 : "reserved-kernel"
<5>[ 4.105854] 0x000001500000-0x000020000000 : "ubi"
<6>[ 4.116686] [TFFS3_Register_Panic_CB] registering panic callback for mtd 17c00000.nand-parts
<6>[ 4.124710] libphy: Fixed MDIO Bus: probed
<4>[ 4.128558] Node name /ssx1@1c000000/gswitch@000000
<4>[ 4.133676] Node name /ssx2@1a000000/gswitch@000000
<4>[ 4.139148] ::::::: SWAPI Reached ::::::
<4>[ 4.141740] GSWIP devid = 0
<4>[ 4.144483] memres->start = 0x1c000000 memres->end = 0x1c002fff
<4>[ 4.150502] addr_gswl = 0xbc000000
<3>[ 4.153774] /GU/KERNEL_grx5_build/linux/drivers/net/ethernet/lantiq/switch-api/gsw_init.c:ltq_gsw_api_register:933 (Register l base:0xbc000000)
<6>[ 4.166641] SWAPI: Registered char device [switch_api] with major no [81]
<4>[ 4.173399] addr_gswl = 0xbc000000
<4>[ 4.176782]
<4>[ 4.176782] ########## Switch Core INIT for device = 0 ##########
<4>[ 4.184333] Switch Core Base Address = 0xbc000000
<4>[ 4.189026]
<4>[ 4.189026] GSWIP 3.0 HardWare Capability
<4>[ 4.194480] -----------------------------
<4>[ 4.194480]
<4>[ 4.199951] Switch Version ID = 0x30
<4>[ 4.204898]
<4>[ 4.206359] Number of logical port = 7
<4>[ 4.211061] Number of ports including V port = 8
<4>[ 4.215751] Number of queues = 32
<4>[ 4.220525] Number of meter instance = 16
<4>[ 4.225303] Number of shapers = 32
<4>[ 4.230079] Number of PMAC = 1
<4>[ 4.234767] Number of CPU PORT = 0
<4>[ 4.239449]
<4>[ 4.240923] PPPOE table size = 16
<4>[ 4.245700] IP packet length table size = 16
<4>[ 4.250472] Protocol table size = 32
<4>[ 4.255249] MAC DA/SA table size = 64
<4>[ 4.260024] Application table size = 64
<4>[ 4.264796] IP DA/SA MSB table size = 64
<4>[ 4.269572] IP DA/SA LSB table size = 64
<4>[ 4.274344] Multicast table size = 64
<4>[ 4.279126] Multicast Hw Snoop = 0
<4>[ 4.283811] TFLOW table size = 64
<4>[ 4.288585] MAC bridge table size = 2048
<4>[ 4.293532] TFLOW RMON counter table Size = 256
<4>[ 4.298390] Payload Table Size = 64
<4>[ 4.303167] Extend VLAN Table Size table = 0
<4>[ 4.307855] VlanFilter table Size = 0
<4>[ 4.307855]
<4>[ 4.314014]
<4>[ 4.315511] Enter PCE micro-code init
<3>[ 4.319386] Exit PCE micro-code init
<4>[ 4.322696] Switch API: PCE MicroCode loaded !!
<4>[ 4.327317] ::::::: SWAPI Reached ::::::
<4>[ 4.331206] GSWIP devid = 1
<4>[ 4.333993] memres->start = 0x1a000000 memres->end = 0x1a002fff
<4>[ 4.339963] addr_gswr = 0xba000000
<3>[ 4.343260] /GU/KERNEL_grx5_build/linux/drivers/net/ethernet/lantiq/switch-api/gsw_init.c:ltq_gsw_api_register:944 (Register r base:0xba000000)
<4>[ 4.356133]
<4>[ 4.356133] ########## Switch Core INIT for device = 1 ##########
<4>[ 4.363674] Switch Core Base Address = 0xba000000
<4>[ 4.368366]
<4>[ 4.368366] GSWIP 3.0 HardWare Capability
<4>[ 4.373882] -----------------------------
<4>[ 4.373882]
<4>[ 4.379306] Switch Version ID = 0x30
<4>[ 4.384249]
<4>[ 4.385705] Number of logical port = 2
<4>[ 4.390414] Number of ports including V port = 17
<4>[ 4.395188] Number of queues = 32
<4>[ 4.399958] Number of meter instance = 64
<4>[ 4.404744] Number of shapers = 32
<4>[ 4.409507] Number of PMAC = 1
<4>[ 4.414198] Number of CPU PORT = 0
<4>[ 4.418879]
<4>[ 4.420361] PPPOE table size = 16
<4>[ 4.425136] IP packet length table size = 16
<4>[ 4.429916] Protocol table size = 32
<4>[ 4.434688] MAC DA/SA table size = 64
<4>[ 4.439459] Application table size = 64
<4>[ 4.444234] IP DA/SA MSB table size = 64
<4>[ 4.449008] IP DA/SA LSB table size = 64
<4>[ 4.453783] Multicast table size = 64
<4>[ 4.458557] Multicast Hw Snoop = 0
<4>[ 4.463245] TFLOW table size = 512
<4>[ 4.468106] MAC bridge table size = 2048
<4>[ 4.473054] TFLOW RMON counter table Size = 256
<4>[ 4.477915] Payload Table Size = 64
<4>[ 4.482689] Extend VLAN Table Size table = 0
<4>[ 4.487377] VlanFilter table Size = 0
<4>[ 4.487377]
<4>[ 4.493539]
<4>[ 4.495015] Enter PCE micro-code init
<3>[ 4.498915] Exit PCE micro-code init
<4>[ 4.502222] Switch API: PCE MicroCode loaded !!
<6>[ 4.512966] lro_sram_membase_res0 from DT: a2013000
<6>[ 4.516772] ltq_toe_membase: e2000000 and lro_sram_membase_res0: e2013000
<6>[ 4.523888] TOE Init Done !!
<6>[ 5.172188] i2c /dev entries driver
<7>[ 5.177844] cpufreq-dt cpufreq-dt.0: no of_node; not parsing pinctrl DT
<6>[ 5.186143] AVM PA for Linux Linux version 4.9.198 (jenkins@buildxjplxpsq19p1xgrx5xNL1skbdbg) (gcc version 8.3.0 (Buildroot 2018.11.4-gd0078a7b1) ) #1 SMP Fri Aug 28 17:55:06 CEST 2020
<6>[ 5.186143] (late init)
<6>[ 5.204731] Mirror/redirect action on
<6>[ 5.207349] u32 classifier
<6>[ 5.210088] Performance counters on
<6>[ 5.213866] input device check on
<6>[ 5.217506] Actions configured
<6>[ 5.221434] ipip: IPv4 and MPLS over IPv4 tunneling driver
<6>[ 5.228380] Initializing XFRM netlink socket
<6>[ 5.231276] IPsec XFRM device driver
<6>[ 5.237469] NET: Registered protocol family 10
<6>[ 5.244343] avm_pa: try to activate hw accelaration for pid 2 (ipv6) called from avm_pa_dev_pidhandle_register_with_ingress
<6>[ 5.254377] NET: Registered protocol family 17
<5>[ 5.258757] Bridge flood ratelimiter registered
<6>[ 5.263149] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
<6>[ 5.276034] lec:lane_module_init: lec.c: initialized
<6>[ 5.280953] mpoa:atm_mpoa_init: mpc.c: initialized
<4>[ 5.285732] KOAM is loaded successfully.
<6>[ 5.289676] l2tp_core: L2TP core driver, V2.0
<6>[ 5.293920] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
<6>[ 5.299640] l2tp_netlink: L2TP netlink interface
<6>[ 5.304221] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
<6>[ 5.309980] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
<6>[ 5.317068] 8021q: 802.1Q VLAN Support v1.8
<5>[ 5.324181] audit: type=1400 audit(4.788:2): apparmor="STATUS" info="AppArmor sha1 policy hashing enabled" pid=1 comm="swapper/0"
<6>[ 5.334483] AppArmor: AppArmor sha1 policy hashing enabled
<6>[ 5.345755] [TFFS3_Init] Called.
<6>[ 5.347642] [TFFS3_CACHE_Configure] Setting up caching for backend nand
<6>[ 5.354198] [TFFS3-CACHE] Caching module for TFFS 3.x
<6>[ 5.359222] [TFFS3-NAND] NAND storage backend for TFFS 3.x
<6>[ 5.674269] [TFFS3-NAND] Initialisation successful, 32/32/32 NAND blocks active, fill rate 11%
<6>[ 5.682040] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 3.0)
<6>[ 5.689307] Adam2 environment variables API installed.
<5>[ 5.694978] ubi0: attaching mtd4
<5>[ 6.346237] ubi0: scanning is finished
<5>[ 6.380953] ubi0: attached mtd4 (name "ubi", size 491 MiB)
<5>[ 6.385025] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>[ 6.391855] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>[ 6.398616] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>[ 6.405562] ubi0: good PEBs: 3928, bad PEBs: 0, corrupted PEBs: 0
<5>[ 6.411639] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
<5>[ 6.418848] ubi0: max/mean erase counter: 396/148, WL threshold: 4096, image sequence number: 17735914
<5>[ 6.428133] ubi0: available PEBs: 0, total reserved PEBs: 3928, PEBs reserved for bad PEB handling: 80
<5>[ 6.437444] ubi0: background thread "ubi_bgt0d" started, PID 625
<6>[ 6.439189] [announce_root] filesystem (/dev/mtdblock5) will be used as root device
<6>[ 6.457247] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
<6>[ 6.469363] devtmpfs: mounted
<6>[ 6.472141] Freeing unused kernel: 388k freed
<4>[ 6.475211] This architecture does not have kernel memory protection.
<5>[ 6.917963] random: init: uninitialized urandom read (4 bytes read)
<5>[ 7.093285] random: 1: uninitialized urandom read (4 bytes read)
<5>[ 7.357039] random: head: uninitialized urandom read (4 bytes read)
<4>[ 7.564875] eip123_hw: loading out-of-tree module taints kernel.
<4>[ 7.569535] eip123_hw: module license 'Proprietary' taints kernel.
<4>[ 7.575705] Disabling lock debugging due to kernel taint
<6>[ 7.581443] [module-mem] give 0x4000 bytes at 884a8000 to module 'eip123_hw' (0x98a000 bytes left)
<6>[ 7.592309] [module-mem] give 0x2000 bytes at 884ac000 to module 'eip123' (0x988000 bytes left)
<6>[ 7.600838] eip123 1e000000.eip123: Detected hardware version 2.2.2
<6>[ 7.605973] eip123 1e000000.eip123: my_id=3 master_id=0 num_mailboxes=4 mailbox_size=256
<6>[ 7.613981] eip123 1e000000.eip123: Linked mailbox number 1
<6>[ 7.643652] eip123 1e000000.eip123: Sysinfo: FWVersion=2.4.2 HWVersion=2.2.2 MemorySize=32768 HostId=3 Identity=0 NVMAnomaly=0 NVMAnomalyLocation=0
<6>[ 7.875704] eip123 1e000000.eip123: eip123_hw init successful
<5>[ 7.908410] random: crng init done
<5>[ 7.910355] random: 7 urandom warning(s) missed due to ratelimiting
<4>[ 7.935705] eip123 1e000000.eip123: Device responded with error_src=0x0 error=0x1 opcode=0x1c
<3>[ 7.942840] eip123 1e000000.eip123: Could not find rootkey in OTP
<6>[ 8.261438] [module-mem] give 0x32000 bytes at 884ae000 to module 'led_module' (0x956000 bytes left)
<3>[ 8.279860] [LED] use GPIO 14 for 'gpio_avm_led_power'
<4>[ 8.284299] [init_ambient_brightness] HWSubRev 4
<3>[ 8.288749] [LED] use GPIO 15 for 'gpio_avm_led_wlan'
<3>[ 8.293324] [LED] use GPIO 16 for 'gpio_avm_led_fon'
<3>[ 8.298229] [LED] use GPIO 17 for 'gpio_avm_led_connect'
<3>[ 8.303522] [LED] use GPIO 19 for 'gpio_avm_led_info'
<3>[ 8.308574] [LED] use GPIO 18 for 'gpio_avm_led_info_red'
<3>[ 8.313928] [LED] use GPIO 20 for 'gpio_avm_ambientbrightness'
<3>[ 8.319751] [LED] use GPIO 3 for 'gpio_avm_led_output_enable'
<3>[ 8.325617] [BUTTON] use GPIO 12 for 'gpio_avm_button_wlan'
<3>[ 8.331022] [BUTTON] use GPIO 11 for 'gpio_avm_button_dect'
<3>[ 8.336580] [BUTTON] use GPIO 13 for 'gpio_avm_button_connect'
<6>[ 8.342734] [avm_connect][state_machine_init] starting event worker thread
<6>[ 8.350356] led_module: Waiting for event system to be ready...
<6>[ 8.437341] [TFFS_Cache] Allocate segement buffer cache (size=2024)
<6>[ 8.444119] TFFS Name Table N
<4>[ 9.580356] [0]system-load 56% loadavg 0.8 0.2 0.1 - pgstat: sum=216469 free=101823 slab=1883 alloc=1064/s fault=412/s ai_sys:0.40/s 0x884a9624 endian_convert_array+0x20/0x38 [eip12 (sleep 1)
<6>[ 15.584600] [module-mem] give 0x10000 bytes at 884e0000 to module 'fat' (0x946000 bytes left)
<6>[ 15.641326] [module-mem] give 0x3000 bytes at 884f0000 to module 'vfat' (0x943000 bytes left)
<6>[ 15.740234] [module-mem] give 0x1000 bytes at 884f3000 to module 'nls_utf8' (0x942000 bytes left)
<2>[ 15.898667] AVM_WATCHDOG: System Init Ueberwachung 120 Sekunden
<30>[ 16.365337] udevd[1152]: starting version 3.2.5
<27>[ 16.432884] udevd[1152]: specified group 'tty' unknown
<27>[ 16.437353] udevd[1152]: specified group 'dialout' unknown
<27>[ 16.442622] udevd[1152]: specified group 'kmem' unknown
<27>[ 16.448017] udevd[1152]: specified group 'input' unknown
<27>[ 16.453236] udevd[1152]: specified group 'video' unknown
<27>[ 16.458584] udevd[1152]: specified group 'audio' unknown
<27>[ 16.464184] udevd[1152]: specified group 'lp' unknown
<27>[ 16.469186] udevd[1152]: specified group 'disk' unknown
<27>[ 16.474274] udevd[1152]: specified group 'cdrom' unknown
<30>[ 16.486278] udevd[1152]: starting eudev-3.2.5
<4>[ 16.878040] [avm_debug] standard kernel-messages
<6>[ 16.929365] [module-mem] give 0xc000 bytes at 884f4000 to module 'Piglet_noemif' (0x936000 bytes left)
<3>[ 16.939975] Could not find Env 'kernel_args' in the device tree ~/Downloads/YourFritz-master/eva_tools
<3>[ 16.945595] [avm-gpio-shim] avm_get_hw_config: ignoring p_param pointer!
<3>[ 16.951272] [avm-gpio-shim] avm_get_hw_config: ignoring p_param pointer!
<3>[ 16.957991] [avm-gpio-shim] avm_get_hw_config: ignoring p_param pointer!
<3>[ 16.964637] [avm-gpio-shim] avm_get_hw_config: ignoring p_param pointer!
<3>[ 16.971307] [avm-gpio-shim] avm_get_hw_config: ignoring p_param pointer!
<3>[ 16.977999] [avm-gpio-shim] avm_get_hw_config: ignoring p_param pointer!
<3>[ 16.984695] [piglet]use default-settings (6 gpios from hw_config)
<3>[ 17.083318] [piglet]patch_dectfw: patch_adress: a0 max_len: 53 with Version 1 Len: 17
<3>[ 17.089797] [piglet]patch_dectfw: RFPI tag found 02d6d28800
<3>[ 17.095283] [piglet]get_tag_value: tag 9 not found -> ignore
<3>[ 17.101438] [piglet]patch_dectfw: c0f69000, totallen = 51753(ca29) crc=0xdc
<3>[ 17.107878] [piglet]slow: dect_loader-bootmode
<6>[ 17.155616] <FE>
<3>[ 18.131356]
<4>[ 18.448233] *************************
<3>[ 20.605773]
<3>[ 20.651596] [piglet]dect_file_process: upload of '/lib/modules/dectfw_secondlevel_441.hex' successfull
<4>[ 21.780367] [2]system-load 27% loadavg 0.52 0.11 0.4 - task runtime:11% max:modprobe 7% pgstat: sum=213949 free=99275 slab=2558 alloc=2108/s fault=1830/s (sleep 2)
<3>[ 22.675893] [piglet]bitfile '/lib/modules/bitfile.bit'
<3>[ 22.679726] [piglet]try to preload in progress-context: /lib/modules/bitfile.bit
<3>[ 26.165375] [piglet] bitfile 340697 bytes done
<6>[ 26.268596] [piglet]TDM: FS: 8000 Hz CLK: 1201545 Hz
<6>[ 26.326460] [module-mem] give 0xb000 bytes at 88500000 to module 'directconnect_datapath' (0x92b000 bytes left)
<6>[ 26.364208] [module-mem] give 0x7000 bytes at 8850b000 to module 'dc_mode0_xrx500' (0x924000 bytes left)
<6>[ 26.409717] [module-mem] give 0x1000 bytes at 88512000 to module 'eth_oam_handler' (0x923000 bytes left)
<6>[ 26.418454] Loading eth_oam driver for WAN interface ptm0
<4>[ 26.425462] eth_oam driver: given ethwan device not present; waiting for its registration
<6>[ 26.432302] Init eth_oam driver succeeded
<6>[ 26.452571] [module-mem] give 0x68000 bytes at 88513000 to module 'pcmlink' (0x8bb000 bytes left)
<6>[ 26.460053] [module-mem] give 0x3000 bytes at 8857b000 to module 'cprocfsmod' (0x8b8000 bytes left)
<3>[ 26.467693] Could not find Env 'kernel_args' in the device tree
<4>[ 26.478648] [module-mem] module 'cchardev' reserved size 24576 is to great for demand size 20480 - waste 4096 (module_alloc_waste=4096)
<6>[ 26.489411] [module-mem] give 0x5000 bytes at 8857e000 to module 'cchardev' (0x8b3000 bytes left)
<6>[ 26.499546] cchardevice: loaded
<6>[ 26.953551] [module-mem] give 0x150000 bytes at 88583000 to module 'isdn_fbox_fon5' (0x763000 bytes left)
<6>[ 26.990336] [capi_oslib]avm_stack_attach: cpu2 -> cpu0
<3>[ 27.000002] [avm-gpio-shim] avm_get_hw_config: ignoring p_param pointer!
<7>[ 27.005563] intel-pinctrl 16c80000.pinctrl: request pin 28 (io-28) for avm-gpio:gpio_avm_pcmlink_fsc
<7>[ 27.005588] intel-pinctrl 16c80000.pinctrl: set mux group name: tdmfsc, pin num: 1
<3>[ 27.005610] [avm-gpio-shim] avm_get_hw_config: ignoring p_param pointer!
<7>[ 27.012140] intel-pinctrl 16c80000.pinctrl: request pin 31 (io-31) for avm-gpio:gpio_avm_pcmlink_dcl
<7>[ 27.012158] intel-pinctrl 16c80000.pinctrl: set mux group name: tdmdcl, pin num: 1
<3>[ 27.012181] [tdmlink]ltq_tdm_request_gpioresource: ERROR: no gpio_avm_pcmlink_di exist
<3>[ 27.021595] tdm_get_irqdata(0): irq 270 flags 1028
<3>[ 27.025114] tdm_get_irqdata(1): irq 271 flags 1025
<6>[ 27.043690][0][isdn]PCMLINK: (fpga2) Codecslots=13 Slics=2 Pots=1 TE=2 NT=2 DECT=4 (CLARE2) DSP-EC: 0
<4>[ 27.276025] [3]system-load 29% loadavg 0.56 0.13 0.4 - task runtime:5% max:modprobe 2% pgstat: sum=210258 free=96730 slab=2732 alloc=4192/s fault=3343/s (sleep 2)
<6>[ 27.519188] [module-mem] give 0x5d000 bytes at 886d3000 to module 'capi_codec' (0x706000 bytes left)
<6>[ 27.721407] [module-mem] give 0x1a7000 bytes at 88730000 to module 'kdsldmod' (0x55f000 bytes left)
<6>[ 27.775553] [module-mem] give 0x50000 bytes at 888d7000 to module 'avm_dect' (0x50f000 bytes left)
<6>[ 27.786135] kdsld: init start (sizeof(struct sk_buff) = 464)
<6>[ 27.791717] kdsld: Initialisation of debughandles ...
<6>[ 27.795646] kdsld: Initialisation of debughandles [OK]
<6>[ 27.798370] [module-mem] give 0x6000 bytes at 88927000 to module 'dect_io' (0x509000 bytes left)
<6>[ 27.809396] kdsld: Initialisation of global ...
<6>[ 27.814770] kdsld: Initialisation of global [OK]
<6>[ 27.818543] kdsld: Initialisation of procfs ...
<6>[ 27.823138] kdsld: Initialisation of procfs [OK]
<6>[ 27.827613] kdsld: Initialisation of kmod_debugctl ...
<6>[ 27.832734] kdsld: Initialisation of kmod_debugctl [OK]
<3>[ 27.834952][0][DECTDRV_ERR] fpCap ext data queueSize 20, avmTpui 16/390, etsiTpui 406/40
<6>[ 27.837906] kdsld: Initialisation of cenv ...
<6>[ 27.842215] kdsld: Initialisation of cenv [OK]
<6>[ 27.846630] kdsld: Initialisation of ctimer ...
<6>[ 27.851640] kdsld: Initialisation of ctimer [OK]
<6>[ 27.855820] kdsld: Initialisation of dsld_setup ...
<6>[ 27.860639] kdsld: Initialisation of dsld_setup [OK]
<6>[ 27.865561] kdsld: Initialisation of adsl_net ...
<6>[ 27.871973] kdsld: Initialisation of adsl_net [OK]
<6>[ 27.875345] kdsld: Initialisation of ingress_shaping ...
<6>[ 27.882382] kdsld: Initialisation of ingress_shaping [OK]
<6>[ 27.886524] kdsld: Initialisation of pppdp ...
<6>[ 27.912615] kdsld: Initialisation of pppdp [OK]
<6>[ 27.915813] kdsld: Initialisation of kmodcmddev ...
<6>[ 27.920810] kdsld: Initialisation of kmodcmddev [OK]
<6>[ 27.925701] kdsld: Initialisation of kdsldev ...
<6>[ 27.930394] kdsld: Initialisation of kdsldev [OK]
<6>[ 27.935016] kdsld: Initialisation of kvpnd ...
<6>[ 27.939476] kdsld: Initialisation of kvpnd [OK]
<6>[ 27.943873] kdsld: Initialisation of kdsluserdev ...
<6>[ 27.948768] kdsld: Initialisation of kdsluserdev [OK]
<6>[ 27.953743] kdsld: Initialisation of kdsltrafficdev ...
<6>[ 27.958968] kdsld: Initialisation of kdsltrafficdev [OK]
<6>[ 27.964249] kdsld: Initialisation of kdslmiscdev ...
<6>[ 27.969220] kdsld: Initialisation of kdslmiscdev [OK]
<6>[ 27.974231] kdsld: Initialisation of packettrace ...
<6>[ 27.979294] kdsld: Initialisation of packettrace [OK]
<6>[ 27.984214] kdsld: Initialisation of nqos ...
<6>[ 27.989248] kdsld: Initialisation of nqos [OK]
<6>[ 27.993033] kdsld: Initialisation of http_filter ...
<4>[ 27.998014] CHRDEV "userman_url" major number 233 goes below the dynamic allocation range
<6>[ 28.006115] userman: device registerd (userman_url) with major=233
<6>[ 28.012259] kdsld: Initialisation of http_filter [OK]
<6>[ 28.017296] kdsld: Initialisation of atmvcchook ...
<6>[ 28.022156] kdsld: Initialisation of atmvcchook [OK]
<6>[ 28.027099] kdsld: Initialisation of timer ...
<6>[ 28.031594] kdsld: Initialisation of timer [OK]
<6>[ 28.036040] kdsld: Initialisation of netdevice_notifier ...
<6>[ 28.041667] kdsld: Initialisation of netdevice_notifier [OK]
<6>[ 28.047249] kdsld: Initialisation of ttychannel_ldisc ...
<6>[ 28.052625] kdsld: ttychannel: ldisc 8 registered
<6>[ 28.057311] kdsld: Initialisation of ttychannel_ldisc [OK]
<6>[ 28.062778] kdsld: Initialisation of guestflt ...
<6>[ 28.067538] kdsld: Initialisation of guestflt [OK]
<6>[ 28.072239] kdsld: Initialisation of bridgeflt ...
<4>[ 28.077016] CHRDEV "bridgeflt" major number 232 goes below the dynamic allocation range
<6>[ 28.085036] kdsld: Initialisation of bridgeflt [OK]
<6>[ 28.089873] kdsld: Initialisation of krextd ...
<6>[ 28.094382] kdsld: Initialisation of krextd:debughandles ...
<6>[ 28.100058] kdsld: Initialisation of krextd:debughandles [OK]
<6>[ 28.105756] kdsld: Initialisation of krextd:global ...
<6>[ 28.110879] kdsld: Initialisation of krextd:global [OK]
<6>[ 28.116077] kdsld: Initialisation of krextd:memcache ...
<6>[ 28.121519] kdsld: Initialisation of krextd:memcache [OK]
<6>[ 28.126760] kdsld: Initialisation of krextd:igmpcompr ...
<6>[ 28.132153] kdsld: Initialisation of krextd:igmpcompr [OK]
<6>[ 28.137604] kdsld: Initialisation of krextd:krextdev ...
<4>[ 28.142955] CHRDEV "krextd" major number 231 goes below the dynamic allocation range
<6>[ 28.150651] kdsld: Initialisation of krextd:krextdev [OK]
<6>[ 28.156019] kdsld: Initialisation of krextd:krextdev_wland ...
<4>[ 28.161848] CHRDEV "krextd_wlan" major number 230 goes below the dynamic allocation range
<6>[ 28.170012] kdsld: Initialisation of krextd:krextdev_wland [OK]
<6>[ 28.175890] kdsld: Initialisation of krextd:netdevice_notifier ...
<6>[ 28.182080] kdsld: Initialisation of krextd:netdevice_notifier [OK]
<6>[ 28.188302] kdsld: Initialisation of krextd:krextdprocfs ...
<6>[ 28.194022] kdsld: Initialisation of krextd:krextdprocfs [OK]
<6>[ 28.199688] kdsld: Initialisation of krextd:krextdtimer ...
<6>[ 28.205239] kdsld: Initialisation of krextd:krextdtimer [OK]
<6>[ 28.210871] kdsld: Initialisation of krextd [OK]
<6>[ 28.215469] kdsld: Initialisation of kdsldprocfs ...
<6>[ 28.220451] kdsld: Initialisation of kdsldprocfs [OK]
<6>[ 28.225458] kdsld: Initialisation of pcp ...
<6>[ 28.230405] kdsld: Initialisation of pcp [OK]
<6>[ 28.234141] kdsld: Initialisation [OK]
<6>[ 28.267786] [module-mem] give 0x1000 bytes at 8892d000 to module 'offload_util' (0x508000 bytes left)
<6>[ 28.298907] [module-mem] give 0x1000 bytes at 8892e000 to module 'ktestdrive' (0x507000 bytes left)
<4>[ 28.309359] [module-mem] module 'offload_dp' reserved size 40960 is to great for demand size 36864 - waste 4096 (module_alloc_waste=8192)
<6>[ 28.320320] [module-mem] give 0x9000 bytes at 8892f000 to module 'offload_dp' (0x4fe000 bytes left)
<3>[ 28.331520] [datapath_proc] { dp_sub_proc_install_30 : 3491 }dp_sub_proc_install ok
<3>[ 28.338004] Rmon clear for CTP RX/TX --Logical Port 0
<3>[ 28.342768] Rmon clear for CTP RX/TX --Logical Port 1
<3>[ 28.347800] Rmon clear for CTP RX/TX --Logical Port 2
<3>[ 28.352833] Rmon clear for CTP RX/TX --Logical Port 3
<3>[ 28.357866] Rmon clear for CTP RX/TX --Logical Port 4
<3>[ 28.362905] Rmon clear for CTP RX/TX --Logical Port 5
<3>[ 28.367938] Rmon clear for CTP RX/TX --Logical Port 6
<3>[ 28.373048] Rmon clear for CTP RX/TX --Logical Port 0
<3>[ 28.378019] Rmon clear for CTP RX/TX --Logical Port 1
<3>[ 28.383051] Rmon clear for CTP RX/TX --Logical Port 2
<3>[ 28.388082] Rmon clear for CTP RX/TX --Logical Port 3
<3>[ 28.393123] Rmon clear for CTP RX/TX --Logical Port 4
<3>[ 28.398151] Rmon clear for CTP RX/TX --Logical Port 5
<3>[ 28.403189] Rmon clear for CTP RX/TX --Logical Port 6
<3>[ 28.408222] Rmon clear for CTP RX/TX --Logical Port 7
<3>[ 28.413254] Rmon clear for CTP RX/TX --Logical Port 8
<3>[ 28.418292] Rmon clear for CTP RX/TX --Logical Port 9
<3>[ 28.423325] Rmon clear for CTP RX/TX --Logical Port 10
<3>[ 28.428448] Rmon clear for CTP RX/TX --Logical Port 11
<3>[ 28.433570] Rmon clear for CTP RX/TX --Logical Port 12
<3>[ 28.438691] Rmon clear for CTP RX/TX --Logical Port 13
<3>[ 28.443814] Rmon clear for CTP RX/TX --Logical Port 14
<3>[ 28.448935] Rmon clear for CTP RX/TX --Logical Port 15
<3>[ 28.454061] Rmon clear for CTP RX/TX --Logical Port 16
<3>[ 28.459235] [datapath_api] { dp_init_module : 2745 }datapath init done
<6>[ 28.465749] [cbm] { dp_port_alloc : 3195 }flags 0x20
<6>[ 28.470660] [cbm] { cbm_add_to_list : 427 }1
<6>[ 28.475103] [cbm] { dp_enable : 3659 }ep=7 tmu_port=2 queue=35 sid=19
<6>[ 28.481340] [cbm] { dp_enable : 3666 }egp_type 0x20
<6>[ 28.486519] [cbm] { dp_enable : 3700 }enable queue 35
<6>[ 28.491191] [cbm] { dp_enable : 3701 }flag 1 refcnt 1488
<6>[ 28.498260] [module-mem] give 0x2000 bytes at 88938000 to module 'offload_qos' (0x4fc000 bytes left)
<6>[ 28.571867] [module-mem] give 0x16000 bytes at 8893a000 to module 'offload_pa' (0x4e6000 bytes left)
<6>[ 28.583951] avm_pa: try to activate hw accelaration for pid 3 (ing0) called from notifier_fn [offload_pa]
<6>[ 28.592357] avm_pa: try to activate hw accelaration for pid 1 (ipv4) called from avm_pa_register_hardware_pa
<6>[ 28.601920] avm_pa: tx channel activated, pid 1 (ipv4)
<6>[ 28.607091] avm_pa: try to activate hw accelaration for pid 2 (ipv6) called from avm_pa_register_hardware_pa
<6>[ 28.616891] avm_pa: tx channel activated, pid 2 (ipv6)
<6>[ 28.634655] [module-mem] give 0x2000 bytes at 88950000 to module 'sch_hw' (0x4e4000 bytes left)
<6>[ 28.655359] [module-mem] give 0x3000 bytes at 88952000 to module 'sch_llq' (0x4e1000 bytes left)
<6>[ 28.684576] [module-mem] give 0x2000 bytes at 88955000 to module 'sch_tbf' (0x4df000 bytes left)
<6>[ 29.204744] [module-mem] give 0x1000 bytes at 88957000 to module 'xrx500_phy_fw' (0x4de000 bytes left)
<6>[ 29.213960] phy-xrx500 phy-xrx500: requesting ltq_fw_PHY11G_IP_xRx5xx_A21.bin
<6>[ 29.269280] phy-xrx500 phy-xrx500: booting GPHY0 firmware at 25A10000 for GRX500
<6>[ 29.275609] phy-xrx500 phy-xrx500: booting GPHY1 firmware at 25A10000 for GRX500
<6>[ 29.282750] phy-xrx500 phy-xrx500: booting GPHY2 firmware at 25A10000 for GRX500
<6>[ 29.290210] phy-xrx500 phy-xrx500: booting GPHY3 firmware at 25A10000 for GRX500
<6>[ 29.297576] phy-xrx500 phy-xrx500: booting GPHY4 firmware at 25A10000 for GRX500
<6>[ 29.485479] [module-mem] give 0x6000 bytes at 88958000 to module 'ltq_eth_drv_xrx500' (0x4d8000 bytes left)
<6>[ 29.495717] PMAC_EG_CFG_SET for GSW-L
<6>[ 29.500154] PMAC_IG_CFG_SET for GSW-L
<6>[ 29.502424] PMAC_EG_CFG_SET for GSW-R
<6>[ 29.509807] PMAC_IG_CFG_SET for GSW-R
<6>[ 29.512313]
<6>[ 29.512313] GSW PMAC Init Done!!!
<6>[ 29.517018] registering one of MII bus
<6>[ 29.520960] libphy: lantiq,xrx500-mdio: probed
<6>[ 29.587427] registering one of MII bus
<6>[ 29.590165] libphy: lantiq,xrx500-mdio: probed
<6>[ 29.610454] [cbm] { dp_port_alloc : 3195 }flags 0x2
<6>[ 29.614004] [cbm] { cbm_add_to_list : 427 }2
<6>[ 29.618166] [cbm] { dp_port_alloc : 3344 }disabling q 17 port 7
<6>[ 29.624071] [cbm] { dp_port_alloc : 3350 }first time LOOKUP prgrm
<6>[ 29.630548] [cbm] { dp_port_alloc : 3355 }1024
<6>[ 29.634900] xrx500_of_iface: rx csum offload is enabled !
<6>[ 29.640032] trying to connect: eth3 to device: 0:02 with irq: 290
<6>[ 31.604157] eth3: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:02, irq=290)
<6>[ 31.927232] [cbm] { dp_enable : 3659 }ep=2 tmu_port=7 queue=17 sid=1
<6>[ 31.932193] [cbm] { dp_enable : 3700 }enable queue 17
<6>[ 31.937151] [cbm] { dp_enable : 3701 }flag 1 refcnt 1024
<6>[ 31.942446] [cbm] { dp_enable : 3700 }enable queue 83
<6>[ 31.947484] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 31.952520] [cbm] { dp_enable : 3700 }enable queue 84
<6>[ 31.957549] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 31.962585] [cbm] { dp_enable : 3700 }enable queue 85
<6>[ 31.967624] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 31.972659] [cbm] { dp_enable : 3700 }enable queue 86
<6>[ 31.977689] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 31.982724] [cbm] { dp_enable : 3700 }enable queue 87
<6>[ 31.987764] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 31.992797] [cbm] { dp_enable : 3700 }enable queue 88
<6>[ 31.997834] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 32.002864] [cbm] { dp_enable : 3700 }enable queue 89
<6>[ 32.007902] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<3>[ 32.014551] [setup_avm_pa_eth_dev] dev eth3
<6>[ 32.017836] [cbm] { dp_port_alloc : 3195 }flags 0x2
<6>[ 32.022267] [cbm] { cbm_add_to_list : 427 }2
<6>[ 32.026488] [cbm] { dp_port_alloc : 3344 }disabling q 18 port 8
<6>[ 32.032334] [cbm] { dp_port_alloc : 3350 }first time LOOKUP prgrm
<6>[ 32.038703] [cbm] { dp_port_alloc : 3355 }1024
<6>[ 32.043149] xrx500_of_iface: rx csum offload is enabled !
<6>[ 32.048251] trying to connect: eth2 to device: 0:03 with irq: 291
<6>[ 33.647214] eth2: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:03, irq=291)
<6>[ 33.838497] [cbm] { dp_enable : 3659 }ep=3 tmu_port=8 queue=18 sid=2
<6>[ 33.843421] [cbm] { dp_enable : 3700 }enable queue 18
<6>[ 33.848404] [cbm] { dp_enable : 3701 }flag 1 refcnt 1024
<6>[ 33.853699] [cbm] { dp_enable : 3700 }enable queue 90
<6>[ 33.858733] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 33.863769] [cbm] { dp_enable : 3700 }enable queue 91
<6>[ 33.868803] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 33.873838] [cbm] { dp_enable : 3700 }enable queue 92
<6>[ 33.878873] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 33.883908] [cbm] { dp_enable : 3700 }enable queue 93
<6>[ 33.888942] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 33.893978] [cbm] { dp_enable : 3700 }enable queue 94
<6>[ 33.899012] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 33.904048] [cbm] { dp_enable : 3700 }enable queue 95
<6>[ 33.909082] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 33.914118] [cbm] { dp_enable : 3700 }enable queue 96
<6>[ 33.919152] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<3>[ 33.925401] [setup_avm_pa_eth_dev] dev eth2
<6>[ 33.928793] [cbm] { dp_port_alloc : 3195 }flags 0x2
<6>[ 33.933350] [cbm] { cbm_add_to_list : 427 }2
<6>[ 33.937549] [cbm] { dp_port_alloc : 3344 }disabling q 19 port 9
<6>[ 33.943396] [cbm] { dp_port_alloc : 3350 }first time LOOKUP prgrm
<6>[ 33.949780] [cbm] { dp_port_alloc : 3355 }1024
<6>[ 33.954266] xrx500_of_iface: rx csum offload is enabled !
<6>[ 33.959314] trying to connect: eth1 to device: 0:04 with irq: 292
<4>[ 34.931928] [2]system-load 59% loadavg 0.91 0.21 0.7 - task runtime:22% max:modprobe 16% pgstat: sum=210859 free=96614 slab=2867 alloc=1094/s fault=761/s (sleep 1)
<4>[ 35.199870] [1]system-load 25% loadavg 0.91 0.21 0.7 - task runtime:39% max:modprobe 24% pgstat: sum=210859 free=96614 slab=2867 alloc=4839/s fault=4013/s (sleep 2)
<6>[ 35.319912] eth1: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:04, irq=292)
<6>[ 35.538237] [cbm] { dp_enable : 3659 }ep=4 tmu_port=9 queue=19 sid=3
<6>[ 35.543162] [cbm] { dp_enable : 3700 }enable queue 19
<6>[ 35.548148] [cbm] { dp_enable : 3701 }flag 1 refcnt 1024
<6>[ 35.553443] [cbm] { dp_enable : 3700 }enable queue 97
<6>[ 35.558474] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 35.563510] [cbm] { dp_enable : 3700 }enable queue 98
<6>[ 35.568547] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 35.573582] [cbm] { dp_enable : 3700 }enable queue 99
<6>[ 35.578614] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 35.583655] [cbm] { dp_enable : 3700 }enable queue 100
<6>[ 35.588771] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 35.593809] [cbm] { dp_enable : 3700 }enable queue 101
<6>[ 35.598927] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 35.603965] [cbm] { dp_enable : 3700 }enable queue 102
<6>[ 35.609083] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 35.614122] [cbm] { dp_enable : 3700 }enable queue 103
<6>[ 35.619240] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<3>[ 35.625503] [setup_avm_pa_eth_dev] dev eth1
<6>[ 35.630209] [cbm] { dp_port_alloc : 3195 }flags 0x2
<6>[ 35.633729] [cbm] { cbm_add_to_list : 427 }2
<6>[ 35.638006] [cbm] { dp_port_alloc : 3344 }disabling q 20 port 10
<6>[ 35.643917] [cbm] { dp_port_alloc : 3350 }first time LOOKUP prgrm
<6>[ 35.650281] [cbm] { dp_port_alloc : 3355 }1024
<6>[ 35.654693] xrx500_of_iface: rx csum offload is enabled !
<6>[ 35.659823] trying to connect: eth0 to device: 0:05 with irq: 293
<6>[ 37.095349] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:05, irq=293)
<6>[ 37.286641] [cbm] { dp_enable : 3659 }ep=5 tmu_port=10 queue=20 sid=4
<6>[ 37.291664] [cbm] { dp_enable : 3700 }enable queue 20
<6>[ 37.296649] [cbm] { dp_enable : 3701 }flag 1 refcnt 1024
<6>[ 37.301943] [cbm] { dp_enable : 3700 }enable queue 104
<6>[ 37.307064] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 37.312100] [cbm] { dp_enable : 3700 }enable queue 105
<6>[ 37.317217] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 37.322256] [cbm] { dp_enable : 3700 }enable queue 106
<6>[ 37.327377] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 37.332414] [cbm] { dp_enable : 3700 }enable queue 107
<6>[ 37.337529] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 37.342570] [cbm] { dp_enable : 3700 }enable queue 108
<6>[ 37.347689] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 37.352727] [cbm] { dp_enable : 3700 }enable queue 109
<6>[ 37.357843] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 37.362883] [cbm] { dp_enable : 3700 }enable queue 110
<6>[ 37.368005] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<3>[ 37.374550] [setup_avm_pa_eth_dev] dev eth0
<6>[ 37.377669] [cbm] { dp_port_alloc : 3195 }flags 0x4
<6>[ 37.382280] [cbm] { cbm_add_to_list : 427 }1
<6>[ 37.386504] [cbm] { dp_port_alloc : 3344 }disabling q 28 port 19
<6>[ 37.392422] [cbm] { dp_port_alloc : 3350 }first time LOOKUP prgrm
<6>[ 37.398799] [cbm] { dp_port_alloc : 3355 }1024
<6>[ 37.403219] xrx500_of_iface: rx csum offload is enabled !
<6>[ 37.408342] trying to connect: wan to device: 1:01 with irq: 294
<6>[ 38.749193] wan: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=1:01, irq=294)
<6>[ 38.940297] [cbm] { dp_enable : 3659 }ep=15 tmu_port=19 queue=28 sid=12
<6>[ 38.945483] [cbm] { dp_enable : 3700 }enable queue 28
<6>[ 38.950462] [cbm] { dp_enable : 3701 }flag 1 refcnt 1024
<6>[ 38.955758] [cbm] { dp_enable : 3700 }enable queue 164
<6>[ 38.960878] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 38.965914] [cbm] { dp_enable : 3700 }enable queue 165
<6>[ 38.971035] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 38.976070] [cbm] { dp_enable : 3700 }enable queue 166
<6>[ 38.981191] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 38.986227] [cbm] { dp_enable : 3700 }enable queue 167
<6>[ 38.991348] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 38.996384] [cbm] { dp_enable : 3700 }enable queue 168
<6>[ 39.001505] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 39.006540] [cbm] { dp_enable : 3700 }enable queue 169
<6>[ 39.011661] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<6>[ 39.016697] [cbm] { dp_enable : 3700 }enable queue 170
<6>[ 39.021818] [cbm] { dp_enable : 3701 }flag 1 refcnt 0
<3>[ 39.028406] [setup_avm_pa_eth_dev] dev wan
<6>[ 39.031367] Lantiq ethernet driver for XRX500 init.
<6>[ 39.200986] sch_hw: adjust excessive latency to ~5ms (687500 Bytes)
<6>[ 39.212518] sch_hw: adjust excessive latency to ~5ms (687500 Bytes)
<6>[ 39.224126] sch_hw: adjust excessive latency to ~5ms (687500 Bytes)
<6>[ 39.235474] sch_hw: adjust excessive latency to ~5ms (687500 Bytes)
<5>[ 39.323893] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 1783
<5>[ 39.336274] audit: type=1400 audit(38.800:3): apparmor="STATUS" operation="profile_load" name="/sbin/nqcs" pid=1780 comm="dd"
<5>[ 39.346270] audit: type=1400 audit(38.808:4): apparmor="STATUS" operation="profile_load" name="/sbin/nqcs//msgsend" pid=1780 comm="dd"
<5>[ 39.472531] UBIFS (ubi0:3): recovery needed
<5>[ 39.920148] UBIFS (ubi0:3): recovery completed
<5>[ 39.923296] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "avm_userdata"
<5>[ 39.931097] UBIFS (ubi0:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>[ 39.940951] UBIFS (ubi0:3): FS size: 391720960 bytes (373 MiB, 3085 LEBs), journal size 19554304 bytes (18 MiB, 154 LEBs)
<5>[ 39.951882] UBIFS (ubi0:3): reserved for root: 4952683 bytes (4836 KiB)
<5>[ 39.958491] UBIFS (ubi0:3): media format: w4/r0 (latest is w4/r0), UUID 52BC70CD-42DE-4B7F-97E0-70CB5E66706D, small LPT model
<4>[ 40.045610] [3]system-load 25% loadavg 1.8 0.26 0.9 - task runtime:6% max:kworker/0:2 5% pgstat: sum=210257 free=96219 slab=2922 alloc=787/s fault=795/s (sleep 2)
<6>[ 40.177191] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=200 act_rate=0 mul=141 div=10 offset=100 NormP=2920 mW -> SumNormP=2920 mW
<6>[ 40.190413] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=0 mul=55 div=10 offset=0 NormP=2750 mW -> SumNormP=5670 mW
<6>[ 40.204903] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_usb_host2: norm_power_rate=500 act_rate=0 mul=55 div=10 offset=0 NormP=2750 mW -> SumNormP=8420 mW
<6>[ 40.219458] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=0 mul=130 div=10 offset=100 NormP=1400 mW -> SumNormP=9820 mW
<6>[ 40.233913] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=200 div=78 offset=150 NormP=406 mW -> SumNormP=10226 mW
<6>[ 40.248292] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=10226 mW
<6>[ 40.262621] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=23 mul=15 div=1 offset=0 NormP=1500 mW -> SumNormP=11726 mW
<6>[ 40.277215] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_dspclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=1000 NormP=1000 mW -> SumNormP=12726 mW
<6>[ 40.292038] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=2000 NormP=2000 mW -> SumNormP=14726 mW
<6>[ 40.307154] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_isdnnt: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=14826 mW
<6>[ 40.321306] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_isdnte: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=14926 mW
<6>[ 40.335467] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=2817 act_rate=268435456 mul=1 div=1 offset=50 NormP=2867 mW -> SumNormP=17793 mW
<6>[ 40.436673] sysrq: SysRq : Changing Loglevel
<6>[ 40.439485] sysrq: Loglevel set to 4
<3>[ 40.448397]
<3>[ 40.448397] [avm_debug] redirecting kernel-messages (/dev/debug)
<6>[ 46.624920][0]xrx500-eth 1e000000.ssx0:eth@a00000 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
<4>[ 49.744431][0][0]system-load 29% loadavg 1.30 0.33 0.11 - task runtime:7% max:kworker/0:2 3% pgstat: sum=210352 free=96320 slab=3006 alloc=4064/s fault=3910/s (sleep 1)
<3>[ 50.675658][0]start slab_allocator-trace now (use cat /proc/slab_allocators)
<0>[ 136.691698][1]Kernel panic - not syncing: ar7wdt_hw_reboot: init sequence hangs !
<0>[ 136.691698][1]
<3>[ 136.699672][1]set_reboot_status: Soft-Reboot(PANIC) - PANIC(2)SUM(2)UP(136)UTC(136)FW(07.21)HW(226)HWS(4)BV(1.3578)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment