YT-260 Pan/Tilt hack

arduino_pan_tilt.ino

const byte numChars = 32;
char receivedChars[numChars];   // an array to store the received data

boolean newData = false;

int dataNumber = 0;             // new for this version

void setup() {
    pinMode(5, OUTPUT);
    pinMode(4, OUTPUT);
    pinMode(0, OUTPUT);
    pinMode(2, OUTPUT);
    
    Serial.begin(115200);
    Serial.println("<Pan/Tilt Controller>");
    Serial.println("Ready!");
}

void loop() {
    recvWithEndMarker();
    showNewNumber();
}

void recvWithEndMarker() {
    static byte ndx = 0;
    char endMarker = '\n';
    char rc;
   
    if (Serial.available() > 0) {
        rc = Serial.read();

        if (rc != endMarker) {
            receivedChars[ndx] = rc;
            ndx++;
            if (ndx >= numChars) {
                ndx = numChars - 1;
            }
        }
        else {
            receivedChars[ndx] = '\0'; // terminate the string
            ndx = 0;
            newData = true;
        }
    }
}

void showNewNumber() {
    if (newData == true) {
        dataNumber = 0;
        dataNumber = atoi(receivedChars);   
        
        if (dataNumber == 1) {
          Serial.println("Received stop command");
          analogWrite(5, 0);
          analogWrite(4, 0);
          exit;       
        }
        else if (dataNumber == 2) {
          Serial.println("Received rotate left command");
          analogWrite(4, 1023);
          digitalWrite(2, LOW);
          delay(300);
          analogWrite(4, 0);
        }
        else if (dataNumber == 3) {
          Serial.println("Received rotate right command");
          analogWrite(4, 1023);
          digitalWrite(2, HIGH);
          delay(300);
          analogWrite(4,0);
        }
        else if (dataNumber == 4) {
          Serial.println("Received tilt back command");
          analogWrite(5, 1023);
          digitalWrite(0, HIGH);
          delay(300);
          analogWrite(5,0);
        }
        else if (dataNumber == 5) {
          Serial.println("Received tilt forward command");
          analogWrite(5, 1023);
          digitalWrite(0, LOW);
          delay(300);
          analogWrite(5,0);
        }
        newData = false;
    }
}

I forgot to mention the power switch. I used a germanium diode so that there would be no chance for the power switch on the base to damage the PIO driver on the Pi. Also, the 10k resistors are to prevent unintended activation and/or ESD damage.

Thanks. Also interesting I think... https://blog.featherbear.cc/post/zifon-yt-1000-wifi-acu/

…

On Fri, 20 Jan 2023 at 23:18, jay3702 ***@***.***> wrote: ***@***.**** commented on this gist. ------------------------------ I forgot to mention the power switch. I used a germanium diode so that there would be no chance for the power switch on the base to damage the PIO driver on the Pi. Also, the 10k resistors are to prevent unintended activation and/or ESD damage. — Reply to this email directly, view it on GitHub <https://gist.github.com/a3c05dd6f6f883de456fbdd358486c40#gistcomment-4444119> or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACKKCKUQ6LNB75XFYNQ7HXLWTMFMVBFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFQKSXMYLMOVS2I5DSOVS2I3TBNVS3W5DIOJSWCZC7OBQXE5DJMNUXAYLOORPWCY3UNF3GS5DZVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFVA4DEOJXGAZTSMFHORZGSZ3HMVZKMY3SMVQXIZI> . You are receiving this email because you commented on the thread. Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub> .

Yep, that's the way I would do it now. I found this one not long after fully committing to the hardware-hacking approach: https://hackaday.io/project/175096-hacking-yt-500-pan-tilt-head-radio-remote/details