Galileo on debian

    GNU GRUB  version 0.97  (604K lower / 245628K upper memory)

 +-------------------------------------------------------------------------+
 | Clanton SVP kernel-SPI initrd-SPI IMR-On IO-APIC/HPET NoEMU             |  
 | Clanton SVP kernel-SPI rootfs-SD IMR-On IO-APIC/HPET NoEMU              |
 | Clanton SVP kernel-MassStorage initrd-MassStorage big-rootfs IMR-On I>  |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |  
 +-------------------------------------------------------------------------+
      Use the ^ and v keys to select which entry is highlighted.
      Press enter to boot the selected OS, 'e' to edit the
      commands before booting, 'a' to modify the kernel arguments
      before booting, or 'c' for a command-line.

   The highlighted entry will be booted automatically in 1 seconds.    






Found layout.conf @ 0xffcff000 len 0x00000d18
#Generated by Buildbot - Sysimage 782
#EXAMPLE LAYOUT.CONF FILE FOR FPGA/RELEASE

# WARNING: this file is indirectly included in a Makefile where it
# defines Make targets and pre-requisites. As a consequence you MUST
# run "make clean" BEFORE making changes to it. Failure to do so may
# result in the make process being unable to clean files it no longer
# has references to.

[main]
size=8388608
type=global


[MFH]
version=0x1
flags=0x0
address=0xfff08000
type=mfh


[Flash Image Version]
type=mfh.version
meta=version
value=782

[ROM_OVERLAY]
address=0xfffe0000
#item_file=/p/clanton/swbuilds/BootRom/Ver_1_00_09/Clanton.rom
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOTROM_OVERRIDE.Fv
type=some_type
# in_capsule=no

[signed-key-module]
address=0xfffd8000
item_file=config/SvpSignedKeyModule.bin
svn_index=0
type=some_type

[svn-area]
address=0xfffd0000
item_file=config/SVNArea.bin
type=some_type

[fixed_recovery_image]
address=0xfff90000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_RECOVERY_IMAGE1.Fv
sign=yes
type=mfh.host_fw_stage1_signed
svn_index=2
# in_capsule=no

[NV_Storage]
address=0xfff30000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_NVRAM.bin
type=some_type

[RMU]
address=0xfff00000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/RMU.bin
type=none_registered

[boot_stage1_image1]
address=0xffec0000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE1.Fv
sign=yes
boot_index=0
type=mfh.host_fw_stage1_signed
svn_index=1

[boot_stage1_image2]
address=0xffe80000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE2.Fv
sign=yes
boot_index=1
type=mfh.host_fw_stage1_signed
svn_index=1

[boot_stage_2_compact]
address=0xffd00000
item_file=/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE2_COMPACT.Fv
sign=yes
type=mfh.host_fw_stage2_signed
svn_index=3

#address=0x002E1000 
[Ramdisk]
address=0xffa60000
item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/image-spi-clanton.cpio.lzma
sign=yes
type=mfh.ramdisk_signed
svn_index=7

[LAYOUT.CONF_DUMP]
address=0xffcff000
type=mfh.build_information
meta=layout

[Kernel]
address=0xff852000
item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/bzImage
sign=yes
type=mfh.kernel_signed
svn_index=6

[grub.conf]
address=0xff851000
item_file=grub/grub-ce.conf
sign=yes
type=mfh.bootloader_conf_signed
svn_index=5

[grub]
address=0xff800000
item_file=/p/clanton/swbuilds/meta-clanton_spi/meta-cln_spi_00157/grub.efi
sign=yes
fvwrap=yes
guid=B43BD3E1-64D1-4744-9394-D0E1C4DE8C87
type=mfh.bootloader_signed
svn_index=4

# strings -n 16 '/p/clanton/swbuilds/EDK2/edk2_gcc_CP_00388/ClantonPeakCRBPlatform/RELEASE_GCC/FV/FlashModules/EDKII_BOOT_STAGE1_IMAGE1.Fv' | grep -i 'clanton.*version' | head | unix2dos
# Clanton RomCode Version 
# Clanton Microcode Version a0_1_00_23

[Linux-EFI, setup=0x1091, size=0x200540]
[Initrd, addr=0xd9df000, size=0x15ff49]
[    2.802573] console [ttyS1] enabled, bootconsole disabled
[    2.815502] Real Time Clock Driver v1.12b
[    2.832892] brd: module loaded
[    2.851880] loop: module loaded
[    2.857545] lpc_sch_probe BIOS_CNTL 0x00000101
[    2.862195] lpc_sch_probe new BIOS_CNTL 0x00000101
[    2.867052] lpc_sch_probe RCBA @ 0xfed1c000
[    2.894837] cpuidle: using governor ladder
[    2.899006] cpuidle: using governor menu
[    2.904657] sdhci: Secure Digital Host Controller Interface driver
[    2.911015] sdhci: Copyright(c) Pierre Ossman
[    2.916006] sdhci-pci 0000:00:14.0: SDHCI controller found [8086:08a7] (rev 10)
[    2.970253] mmc0: SDHCI controller on PCI [0000:00:14.0] using ADMA
[    2.983785] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.006173] THRM: critical reset 104 c hot 95 c hardware failover 105 c
[    3.034816] TCP: cubic registered
[    3.038203] NET: Registered protocol family 17
[    3.044720] ... APIC ID:      00000000 (0)
[    3.048856] ... APIC VERSION: 00030010
[    3.052740] 0000000000000000000000000000000000000000000000000000000000000000
[    3.052740] 0000000000000000000000000002000000000000000000000000000000000000
[    3.052740] 0000000000000000000000000000000000000000000000000000000000008000
[    3.052740] 
[    3.076663] testing the IO APIC.......................
[    3.084360] .................................... done.
[    3.089541] Using IPI Shortcut mode
[    3.106712]   Magic number: 1:0:0
[    3.122765] Freeing unused kernel memory: 272k freed
[    3.130794] Write protecting the kernel text: 3100k
[    3.136858] Write protecting the kernel read-only data: 1284k
[    3.142793] NX-protecting the kernel data: 3044k
[    3.165221] mmc0: new high speed SDHC card at address b368
[    3.189824] mmcblk0: mmc0:b368 SD08G 7.41 GiB 
[    3.225250]  mmcblk0: p1
[    3.241243] tsc: Refined TSC clocksource calibration: 399.076 MHz
[    3.247580] Switching to clocksource tsc
[    3.372969] udevd[542]: starting version 182
Waiting for removable media...
  5[    9.534515] kjournald starting.  Commit interval 5 seconds
[    9.543211] EXT3-fs (loop0): using internal journal
[    9.548320] EXT3-fs (loop0): mounted filesystem with writeback data mode
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[   13.176537] udevd[1069]: starting version 175
. ok 
[....] Synthesizing the initial hotplug events...[   15.533708] ACPI: bus type usb registered
[   15.538871] usbcore: registered new interface driver usbfs
[   15.813430] usbcore: registered new interface driver hub
[   15.901711] usbcore: registered new device driver usb
[   16.007046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   16.123090] ehci-pci: EHCI PCI platform driver
[   16.128162] ehci-pci 0000:00:14.3: EHCI Host Controller
[   16.292452] ehci-pci 0000:00:14.3: new USB bus registered, assigned bus number 1
[   16.369179] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
[   16.374881] ehci-pci 0000:00:14.3: INSNREG01 is 0x007f007f
[   16.444041] ehci-pci 0000:00:14.3: irq 19, io mem 0x9000d000
[   16.495572] ehci-pci 0000:00:14.3: USB 2.0 started, EHCI 1.00
[   16.509814] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   16.754516] hub 1-0:1.0: USB hub found
[   16.759052] hub 1-0:1.0: 2 ports detected
[   16.984945] ce4100_spi 0000:00:15.0: enabling device (0000 -> 0002)
[   17.050564] stmmaceth 0000:00:14.6: enabling device (0000 -> 0002)
[   17.057869] stmmac MSI mode enabled
[   17.061370] Vendor 0x8086 Device 0x0937
[   17.160622] stmmac - user ID: 0x10, Synopsys ID: 0x37
[   17.165729]  DMA HW capability register supported
[   17.170432]  Enhanced/Alternate descriptors
[   17.174862]  RX Checksum Offload Engine supported (type 2)
[   17.180512]  TX Checksum insertion supported
[   17.184833]  Enable RX Mitigation via HW Watchdog Timer
[   17.538480] libphy: stmmac: probed
[   17.542091] eth0: PHY ID 20005c90 at 1 IRQ 0 (stmmac-1:01) active
[ ok [   17.606633] ohci_hcd 0000:00:14.4: OHCI Host Controller
[   17.640342] ohci_hcd 0000:00:14.4: new USB bus registered, assigned bus number 2
[   17.648091] ohci_hcd 0000:00:14.4: irq 16, io mem 0x9000c000
[   17.767036] hub 2-0:1.0: USB hub found
done.
[   17.815300] hub 2-0:1.0: 2 ports detected
[   17.890745] intel_cln_gpio_probe UIO addr 0x90006000 internal_addr 0x00000000 size 3765706752 memtype 4096
[   18.013455] ce4100_spi 0000:00:15.1: enabling device (0000 -> 0002)
[....] Waiting for /dev to be fully populated...[   19.390312] spi_master spi0: will run message pump with realtime priority
[   19.470324] spi_master spi1: will run message pump with realtime priority
[   19.547375] at24 0-0050: byte_len looks suspicious (no power of 2)!
[   19.584310] at24 0-0050: 11264 byte at24 EEPROM, writable, 1 bytes/write
[   19.624041] cy8c9540a 0-0020: can't read device ID
[   19.628975] cy8c9540a: probe of 0-0020 failed with error -121
done.
[ ok ] Activating swap...done.
[warn] Creating compatibility symlink from /etc/mtab to /proc/mounts. ... (warning).
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[....] Configuring network interfaces...[   39.675597] NET: Registered protocol family 10
Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

[   40.088272] eth0: device MAC address 98:4f:ee:00:49:97
Listening on LPF/eth0/98:4f:ee:00:49:97
Sending on   LPF/eth0/98:4f:ee:00:49:97
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 1
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
done.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Enabling additional executable binary formats: binfmt-supportupdate-binfmts: warning: Couldn't load the binfmt_misc module.
. ok 
[ ok ] Starting enhanced syslogd: rsyslogd.
Starting script ssh 
[ ok ] Starting periodic command scheduler: cron.

Debian GNU/Linux 7 clanton ttyS1

clanton login: kazu
Password: 
Linux clanton 3.8.7-yocto-standard #1 Tue Oct 1 00:09:01 IST 2013 i586

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
kazu@clanton:~$ ls
ros_catkin_ws