FreeBSD10 MBR on BhyVe by ubuntu13.10

Entering vmboot()
vmboot: Starting Networking. "File Exists" warnings are okay.
ifconfig: BRDGADD em0: File exists

vmboot: the bhyve command will be:

/usr/sbin/bhyve -c 2 -m 4096 -A -I -H -s 0,hostbridge -s 2,virtio-blk,./vm/ubuntu0/ubuntu0.img -s 3,virtio-net,tap0 -s 4,ahci-cd,./vm/ubuntu0/ubuntu0.iso -S 31,uart,stdio ubuntu0

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
[    0.000000] Command line: console=ttyS0 BOOT_IMAGE=/install/vmlinuz file=/cdrom/preseed/ubuntu-server.seed priority=low --
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fffe] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI not present or invalid.
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] e820: last_pfn = 0xc0000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0000-0x000f000f] mapped at [ffff8800000f0000]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbfffffff]
[    0.000000] RAMDISK: [mem 0x02bdd000-0x033c6fff]
[    0.000000] ACPI: RSDP 00000000000f0400 00024 (v02 BHYVE )
[    0.000000] ACPI: XSDT 00000000000f0480 00034 (v01 BHYVE  BVXSDT   00000001 INTL 20130823)
[    0.000000] ACPI: APIC 00000000000f0500 0005C (v01 BHYVE  BVMADT   00000001 INTL 20130823)
[    0.000000] ACPI: FACP 00000000000f0600 0010C (v05 BHYVE  BVFACP   00000001 INTL 20130823)
[    0.000000] ACPI: DSDT 00000000000f0800 000F2 (v02 BHYVE  BVDSDT   00000001 INTL 20130823)
[    0.000000] ACPI: FACS 00000000000f0780 00040
[    0.000000] Setting APIC routing to physical flat.
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fff9000-0x13fffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbfffffff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-16
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86720 r8192 d23872 u1048576
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1032073
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0 BOOT_IMAGE=/install/vmlinuz file=/cdrom/preseed/ubuntu-server.seed priority=low --
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 4037412K/4193912K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 156500K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: using PMTIMER reference calibration
[    0.000000] tsc: Detected 2413.331 MHz processor
[    0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4826.66 BogoMIPS (lpj=9653324)
[    0.001005] pid_max: default: 32768 minimum: 301
[    0.001482] Security Framework initialized
[    0.001909] AppArmor: AppArmor initialized
[    0.002300] Yama: becoming mindful.
[    0.002953] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.007898] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010664] Mount-cache hash table entries: 256
[    0.011463] Initializing cgroup subsys memory
[    0.011891] Initializing cgroup subsys devices
[    0.012311] Initializing cgroup subsys freezer
[    0.012727] Initializing cgroup subsys blkio
[    0.013128] Initializing cgroup subsys perf_event
[    0.013570] Initializing cgroup subsys hugetlb
[    0.014055] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.014055] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.014055] tlb_flushall_shift: 6
[    0.015607] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[    0.024040] ACPI: Core revision 20130517
[    0.024771] ACPI: All ACPI Tables successfully acquired
[    0.025580] ftrace: allocating 27796 entries in 109 pages
[    0.063115] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.103350] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 520  @ 2.40GHz (fam: 06, model: 25, stepping: 05)
[    0.188675] APIC calibration not consistent with PM-Timer: 79ms instead of 100ms
[    0.189378] APIC delta adjusted to PM-Timer: 14980335 (11970240)
[    0.189997] Performance Events: unsupported p6 CPU model 37 no PMU driver, software events only.
[    0.192556] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.193374] smpboot: Booting Node   0, Processors  #1 OK
[    0.301675] Brought up 2 CPUs
[    0.302138] smpboot: Total of 2 processors activated (9615.01 BogoMIPS)
[    0.304072] devtmpfs: initialized
[    0.305724] EVM: security.selinux
[    0.306214] EVM: security.SMACK64
[    0.306706] EVM: security.capability
[    0.308417] regulator-dummy: no parameters
[    0.309095] RTC time: 92:14:31, date: 03/30/14
[    0.309806] NET: Registered protocol family 16
[    0.310612] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.311705] ACPI: bus type PCI registered
[    0.312199] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.312901] PCI: Using configuration type 1 for base access
[    0.314463] bio: create slab <bio-0> at 0
[    0.315292] ACPI: Added _OSI(Module Device)
[    0.315702] ACPI: Added _OSI(Processor Device)
[    0.316123] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.316568] ACPI: Added _OSI(Processor Aggregator Device)
[    0.317368] ACPI: Interpreter enabled
[    0.317725] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    0.318616] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.319508] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
[    0.320399] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130517/hwxface-571)
[    0.321328] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20130517/hwxface-571)
[    0.322218] ACPI: (supports S0)
[    0.322519] ACPI: Using IOAPIC for interrupt routing
[    0.322999] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.323864] ACPI: No dock devices found.
[    0.324431] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.325018] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.325765] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.326513] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.327608] PCI host bridge to bus 0000:00
[    0.328000] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.328519] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.329098] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.329747] pci 0000:00:00.0: ignoring class 0x060000 (doesn't match header type 01)
[    0.358516] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.359519] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.360278] vgaarb: loaded
[    0.360749] SCSI subsystem initialized
[    0.361114] ACPI: bus type ATA registered
[    0.361642] ACPI: bus type USB registered
[    0.362071] usbcore: registered new interface driver usbfs
[    0.362600] usbcore: registered new interface driver hub
[    0.363197] usbcore: registered new device driver usb
[    0.364014] PCI: Using ACPI for IRQ routing
[    0.364440] pci 0000:00:02.0: no compatible bridge window for [mem 0xc0000000-0xc0001fff]
[    0.365213] pci 0000:00:03.0: no compatible bridge window for [mem 0xc0002000-0xc0003fff]
[    0.366001] pci 0000:00:04.0: no compatible bridge window for [mem 0xc0004000-0xc00043ff]
[    0.366939] NetLabel: Initializing
[    0.367269] NetLabel:  domain hash size = 128
[    0.367679] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.368156] NetLabel:  unlabeled traffic allowed by default
[    0.368811] Switched to clocksource refined-jiffies
[    0.378449] AppArmor: AppArmor Filesystem Enabled
[    0.378959] pnp: PnP ACPI init
[    0.379283] ACPI: bus type PNP registered
[    0.379762] pnp: PnP ACPI: found 1 devices
[    0.380159] ACPI: bus type PNP unregistered
[    0.390782] Switched to clocksource acpi_pm
[    0.391195] pci 0000:00:02.0: BAR 1: can't assign mem (size 0x2000)
[    0.391790] pci 0000:00:02.0: BAR 1: trying firmware assignment [mem 0xc0000000-0xc0001fff]
[    0.392571] pci 0000:00:02.0: BAR 1: assigned [mem 0xc0000000-0xc0001fff]
[    0.393227] pci 0000:00:03.0: BAR 1: can't assign mem (size 0x2000)
[    0.393863] pci 0000:00:03.0: BAR 1: trying firmware assignment [mem 0xc0002000-0xc0003fff]
[    0.394661] pci 0000:00:03.0: BAR 1: assigned [mem 0xc0002000-0xc0003fff]
[    0.395312] pci 0000:00:02.0: BAR 6: can't assign mem pref (size 0x800)
[    0.395957] pci 0000:00:03.0: BAR 6: can't assign mem pref (size 0x800)
[    0.420017] pci 0000:00:04.0: BAR 6: can't assign mem pref (size 0x800)
[    0.420983] pci 0000:00:1f.0: BAR 6: can't assign mem pref (size 0x800)
[    0.421953] pci 0000:00:04.0: BAR 5: can't assign mem (size 0x400)
[    0.422963] pci 0000:00:04.0: BAR 5: trying firmware assignment [mem 0xc0004000-0xc00043ff]
[    0.424186] pci 0000:00:04.0: BAR 5: assigned [mem 0xc0004000-0xc00043ff]
[    0.425199] pci 0000:00:00.0: not setting up bridge for bus 0000:01
[    0.426219] NET: Registered protocol family 2
[    0.427149] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.428759] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.430266] TCP: Hash tables configured (established 32768 bind 32768)
[    0.431390] TCP: reno registered
[    0.431872] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.432820] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.433911] NET: Registered protocol family 1
[    0.434684] Trying to unpack rootfs image as initramfs...
[    0.617997] Freeing initrd memory: 8104K (ffff880002bdd000 - ffff8800033c7000)
[    0.618704] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.619315] software IO TLB [mem 0xbc000000-0xc0000000] (64MB) mapped at [ffff8800bc000000-ffff8800bfffffff]
[    0.620365] Scanning for low memory corruption every 60 seconds
[    0.621413] Initialise module verification
[    0.621871] audit: initializing netlink socket (disabled)
[    0.622398] type=2000 audit(1396469671.447:1): initialized
[    0.646120] bounce pool size: 64 pages
[    0.646513] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.648944] zbud: loaded
[    0.649648] VFS: Disk quotas dquot_6.5.2
[    0.650097] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.651444] fuse init (API version 7.22)
[    0.652000] msgmni has been set to 7901
[    0.654883] Key type asymmetric registered
[    0.655288] Asymmetric key parser 'x509' registered
[    0.655790] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.656650] io scheduler noop registered
[    0.657221] io scheduler deadline registered (default)
[    0.657992] io scheduler cfq registered
[    0.658640] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.659463] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.660585] GHES: HEST is not enabled!
[    0.661706] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.683851] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.688795] serial 0000:00:1f.0: can't derive routing for PCI INT A
[    0.689388] serial 0000:00:1f.0: PCI INT A: no GSI - using ISA IRQ 4
[    0.711389] 0000:00:1f.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.712736] Linux agpgart interface v0.103
[    0.717054] brd: module loaded
[    0.719896] loop: module loaded
[    1.621413] tsc: Refined TSC clocksource calibration: 2394.393 MHz
[    2.642865] Switched to clocksource tsc
[  238.593098] INFO: task swapper/0:1 blocked for more than 120 seconds.
[  238.607760] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  238.629610] swapper/0       D ffff88013fc14580     0     1      0 0x00000000
[  238.650433]  ffff880139ae9958 0000000000000046 ffff880139ae9fd8 0000000000014580
[  238.670778]  ffff880139ae9fd8 0000000000014580 ffff880139ae0000 ffff88013fc14e28
[  238.681914]  ffff880139ae99e0 0000000000000002 ffffffff8113eaf0 ffff880139ae99d0
[  238.695392] Call Trace:
[  238.700237]  [<ffffffff8113eaf0>] ? wait_on_page_read+0x60/0x60
[  238.709671]  [<ffffffff816ea87d>] io_schedule+0x9d/0x130
[  238.718042]  [<ffffffff8113eafe>] sleep_on_page+0xe/0x20
[  238.726319]  [<ffffffff816e86cb>] __wait_on_bit_lock+0x5b/0xc0
[  238.735498]  [<ffffffff811de140>] ? blkdev_write_begin+0x30/0x30
[  238.744772]  [<ffffffff8113ec0a>] __lock_page+0x6a/0x70
[  238.752915]  [<ffffffff81085600>] ? wake_atomic_t_function+0x40/0x40
[  238.762738]  [<ffffffff811de158>] ? blkdev_readpage+0x18/0x20
[  238.771883]  [<ffffffff8113fbb8>] do_read_cache_page+0x168/0x190
[  238.781219]  [<ffffffff8113fc19>] read_cache_page+0x19/0x30
[  238.789974]  [<ffffffff8134320d>] read_dev_sector+0x2d/0x90
[  238.798735]  [<ffffffff81343f90>] ? check_partition+0x240/0x240
[  238.807880]  [<ffffffff81344000>] adfspart_check_ICS+0x70/0x280
[  238.816864]  [<ffffffff81367809>] ? snprintf+0x39/0x40
[  238.824755]  [<ffffffff81343f90>] ? check_partition+0x240/0x240
[  238.834066]  [<ffffffff81343e58>] check_partition+0x108/0x240
[  238.843048]  [<ffffffff81343a84>] rescan_partitions+0xb4/0x2c0
[  238.852099]  [<ffffffff811df4b4>] __blkdev_get+0x384/0x4c0
[  238.860728]  [<ffffffff811df7b5>] blkdev_get+0x1c5/0x340
[  238.869003]  [<ffffffff811bfbd3>] ? unlock_new_inode+0x53/0x80
[  238.875645]  [<ffffffff811ddffd>] ? bdget+0x13d/0x160
[  238.880715]  [<ffffffff81341331>] add_disk+0x3a1/0x4b0
[  238.885851]  [<ffffffff811de81f>] ? revalidate_disk+0x6f/0x80
[  238.891693]  [<ffffffff81414142>] ? vp_get+0x52/0x70
[  238.896727]  [<ffffffff81496492>] virtblk_probe+0x4a2/0x6d0
[  238.902310]  [<ffffffff81413f10>] ? vp_finalize_features+0x30/0x30
[  238.908409]  [<ffffffff814128b2>] virtio_dev_probe+0xe2/0x150
[  238.914152]  [<ffffffff81475177>] driver_probe_device+0x87/0x3a0
[  238.920692]  [<ffffffff81475563>] __driver_attach+0x93/0xa0
[  238.932057]  [<ffffffff814754d0>] ? __device_attach+0x40/0x40
[  238.934186]  [<ffffffff81473093>] bus_for_each_dev+0x63/0xa0
[  238.936264]  [<ffffffff81474bce>] driver_attach+0x1e/0x20
[  238.939322]  [<ffffffff81474768>] bus_add_driver+0x1e8/0x2a0
[  238.942530]  [<ffffffff81d72378>] ? loop_init+0x14d/0x14d
[  238.945611]  [<ffffffff81475c04>] driver_register+0x74/0x150
[  238.948852]  [<ffffffff81d72378>] ? loop_init+0x14d/0x14d
[  238.952311]  [<ffffffff81412740>] register_virtio_driver+0x20/0x30
[  238.956425]  [<ffffffff81d723c6>] init+0x4e/0x80
[  238.959331]  [<ffffffff810020fa>] do_one_initcall+0xfa/0x1b0
[  238.962892]  [<ffffffff81082895>] ? parse_args+0x225/0x400
[  238.966362]  [<ffffffff81d27068>] kernel_init_freeable+0x165/0x1e6
[  238.970242]  [<ffffffff81d2689a>] ? do_early_param+0x88/0x88
[  238.973804]  [<ffffffff816d4730>] ? rest_init+0x80/0x80
[  238.977105]  [<ffffffff816d473e>] kernel_init+0xe/0x190
[  238.980419]  [<ffffffff816f516c>] ret_from_fork+0x7c/0xb0
[  238.983855]  [<ffffffff816d4730>] ? rest_init+0x80/0x80