Created
May 3, 2019 22:41
-
-
Save Klathmon/59adf6450e1decddbae792137a05d95b to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# generated by Slic3r Prusa Edition 1.42.0-beta2+win64 on 2019-04-25 at 18:00:51 | |
[filament:Black Hatchbox] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #000000 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 25 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 205 | |
[filament:Black Sparkle Proto-Pasta] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #000000 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 60 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 230 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 230 | |
[filament:Black eSun PETG] | |
bed_temperature = 90 | |
bridge_fan_speed = 50 | |
compatible_printers = | |
compatible_printers_condition = | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 3 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 20 | |
filament_colour = #000000 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 4 | |
filament_cost = 27.82 | |
filament_density = 1.27 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 8 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = PET | |
filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PET | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 85 | |
first_layer_temperature = 230 | |
inherits = | |
max_fan_speed = 50 | |
min_fan_speed = 30 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" | |
temperature = 230 | |
[filament:Blue Sparkle Proto-Pasta] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #0000A0 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 60 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 230 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 228 | |
[filament:Bubblegum Pink Matterhackers] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FD007E | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 42 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 215 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 215 | |
[filament:Copper Amazon Basics] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #6F3700 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 19 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 210 | |
[filament:Gold 3d Solutech] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #9E8265 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 18 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 210 | |
[filament:Gold Sparkle Proto-Pasta] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #808000 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 60 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 225 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 225 | |
[filament:Gray Amazon Basics] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #C0C0C0 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 19 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 210 | |
[filament:Green Hatchbox] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #00BF00 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 3 | |
filament_cost = 25 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 90 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 205 | |
[filament:Green Sparkle Proto-Pasta] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #008000 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 60 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 235 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 235 | |
[filament:Light Blue 3d Solutech] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #80FFFF | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 25 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 210 | |
[filament:Light Pink 3d Solutech] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FFB9FF | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 25 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 200 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 200 | |
[filament:Lilac Matterhackers] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #8080FF | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 2 | |
filament_cost = 42 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 210 | |
[filament:Mint 3d Solutech] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #04FBCA | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 18 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.54839 5.51613 6.58065 7.41935 7.70968 7.93548 9.09677 10.6452| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 200 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 200 | |
[filament:Navy Blue 3d Solutech] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #0000D5 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 18 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 210 | |
[filament:Orange AIO Robotics] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FF8000 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 26 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 205 | |
[filament:Orange Hatchbox] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FF8000 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 3 | |
filament_cost = 25 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 90 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 205 | |
[filament:Orange Sparkle Proto-Pasta] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FFA346 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 60 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 235 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 235 | |
[filament:PVA eSun] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 0 | |
disable_fan_first_layers = 1 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FFFFD7 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 80 | |
filament_density = 1.23 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 2.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = BVOH | |
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 1 | |
filament_toolchange_delay = 0 | |
filament_type = PVA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 205 | |
inherits = Verbatim BVOH MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" | |
temperature = 205 | |
[filament:Pink Sparkle Proto-Pasta] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FF80FF | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 60 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 230 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 225 | |
[filament:Purple Sparkle Proto-Pasta] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #400080 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 60 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 230 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 225 | |
[filament:Purple eSun] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #400080 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 24 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 215 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 215 | |
[filament:Red Hatchbox] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FF0000 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 20 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 205 | |
[filament:Red Matterhackers] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FF0000 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 42 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 14 | |
filament_loading_speed_start = 3 | |
filament_max_volumetric_speed = 10 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 100 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 215 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 210 | |
[filament:Red Sparkle Proto-Pasta] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FF0000 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 60 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 225 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 225 | |
[filament:Silver PolyMaker] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #C0C0C0 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 25 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 215 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 215 | |
[filament:Silver Sparkle Proto-Pasta] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #C0C0C0 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 60 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 225 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 225 | |
[filament:Skin 3d Solutech] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #EBC6BC | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 18 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.54839 5.51613 6.58065 7.41935 7.70968 7.93548 9.09677 10.6452| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 210 | |
[filament:Teal 3d Solutech] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #04BAFF | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 20 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.54839 5.51613 6.58065 7.41935 7.70968 7.93548 9.09677 10.6452| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 210 | |
[filament:White Hatchbox] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FFFFFF | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 20 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 210 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 205 | |
[filament:Wood Hatchbox] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 0 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 0.98 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #BD8604 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 34 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 195 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 195 | |
[filament:Yellow Hatchbox] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FFFF00 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 25 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 215 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 205 | |
[filament:Yellow eSun] | |
bed_temperature = 55 | |
bridge_fan_speed = 100 | |
compatible_printers = | |
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ | |
compatible_prints = | |
compatible_prints_condition = | |
cooling = 1 | |
disable_fan_first_layers = 2 | |
end_filament_gcode = "; Filament-specific end gcode" | |
extrusion_multiplier = 1 | |
fan_always_on = 1 | |
fan_below_layer_time = 100 | |
filament_colour = #FFFF00 | |
filament_cooling_final_speed = 1 | |
filament_cooling_initial_speed = 2 | |
filament_cooling_moves = 1 | |
filament_cost = 23 | |
filament_density = 1.24 | |
filament_diameter = 1.75 | |
filament_load_time = 12 | |
filament_loading_speed = 21 | |
filament_loading_speed_start = 19 | |
filament_max_volumetric_speed = 11.5 | |
filament_minimal_purge_on_wipe_tower = 15 | |
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.54839 5.51613 6.58065 7.41935 7.77419 8 8.96774 10.5161 11.4516 11.5161| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
filament_settings_id = "" | |
filament_soluble = 0 | |
filament_toolchange_delay = 0 | |
filament_type = PLA | |
filament_unload_time = 11 | |
filament_unloading_speed = 20 | |
filament_unloading_speed_start = 120 | |
first_layer_bed_temperature = 55 | |
first_layer_temperature = 215 | |
inherits = Prusament PLA MMU2 | |
max_fan_speed = 100 | |
min_fan_speed = 100 | |
min_print_speed = 15 | |
slowdown_below_layer_time = 20 | |
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
temperature = 205 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment