https://github.com/Koenkk/zigbee2mqtt/issues/13767

DDS238-2.js

const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const extend = require('zigbee-herdsman-converters/lib/extend');
const utils = require('zigbee-herdsman-converters/lib/utils');
const ota = require('zigbee-herdsman-converters/lib/ota');
const tuya = require('zigbee-herdsman-converters/lib/tuya');
const e = exposes.presets;
const ea = exposes.access;

const definition = {
    fingerprint: tuya.fingerprint('TS0601', ['_TZE200_lsanae15', '_TZE200_bkkmqmyo', '_TZE200_eaac7dkw']),
    model: 'TS0601_din_1',
    vendor: 'TuYa',
    description: 'Zigbee DIN energy meter',
    fromZigbee: [tuya.fzDataPoints],
    toZigbee: [tuya.tzDataPoints],
    configure: tuya.configureMagicPacket,
    exposes: [tuya.exposes.switch(), e.ac_frequency(), e.energy(), e.power(), e.power_factor(), e.voltage(), e.current(),
        exposes.numeric('produced_energy', exposes.access.STATE).withUnit('kWh').withDescription('Sum of produced energy'),],
    meta: {
        tuyaDatapoints: [
            [1, 'energy', tuya.valueConverter.divideBy100],
            [6, null, tuya.valueConverter.phaseA], // voltage and current
            [16, 'state', tuya.valueConverter.onOff],
            [103, 'power', tuya.valueConverter.raw],
            [105, 'ac_frequency', tuya.valueConverter.divideBy100],
            [111, 'power_factor', tuya.valueConverter.divideBy10],
            // Ignored for now; we don't know what the values mean
            [109, null, null], // reactive_power in VArh, ignored for now
            [101, null, null], // total active power (translated from chinese) - same as energy dp 1??
            [102, 'produced_energy', tuya.valueConverter.divideBy100],
            [9, null, null], // Fault - we don't know the possible values here
            [110, null, null], // total reactive power (translated from chinese) - value is 0.03kvar, we already have kvarh on dp 109
            [17, null, null], // Alarm set1 - value seems garbage "AAAAAAAAAAAAAABkAAEOAACqAAAAAAAKAAAAAAAA"
            [18, null, null], // 18 - Alarm set2 - value seems garbage "AAUAZAAFAB4APAAAAAAAAAA="
        ],
    },
    whiteLabel: [{vendor: 'Hiking', model: 'DDS238-2'}, {vendor: 'TuYa', model: 'RC-MCB'}],
};

module.exports = definition;

@gericho, Use the addon MariaDB there everything is done very simply
Here are all the details:

https://www.home-assistant.io/integrations/recorder/

Use the addon MariaDB there everything is done very simply

Thank you for the advice, I tiried already days ago, I'm on a raspberry Pi3, Maria DB literally killed the system on a 64bit Hassio, I downgraded yesterday to 32bit Hassio using a full backup, I'll try if works better. BTW 32bit on this machine is WAY faster, 30% ram saved, never used swap, the system is fresh like new again. I'll try mariaDB on 32bit, but I'm worried SD cards (I'm using a sandisk max endurance) are no longer a viable solution with latest Hassio releases, I see all people switching to SSD, at that point better to point on a faster machine. I STILL think Home assistant developers have to take in consideration to customize granularity in recorder by entity. A sensor that pushes 10+ entities to the network (if you use original hub and app) every 10 seconds, is just sad, starting from TuYa decision to flood the network in general, no doubt.

@Matriciel yes, or switch the the dev branch (https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html)

Hi, thanks for your great job, but i have a error with the code.

[18:09:33] INFO: Preparing to start...
[18:09:33] INFO: Socat not enabled
[18:09:34] INFO: Starting Zigbee2MQTT...
/app/dist/util/externally-loaded.js:20
exposes: [tuya.exposes.switch(), e.ac_frequency(), e.energy(), e.power(), e.power_factor(), e.voltage(), e.current(),
^
TypeError: tuya.exposes.switch is not a function
at /app/dist/util/externally-loaded.js:20:34
at Script.runInContext (node:vm:139:12)
at Script.runInNewContext (node:vm:144:17)
at Object.runInNewContext (node:vm:298:38)
at loadModuleFromText (/app/lib/util/utils.ts:148:8)
at loadModuleFromFile (/app/lib/util/utils.ts:155:12)
at Object.getExternalConvertersDefinitions (/app/lib/util/utils.ts:165:25)
at getExternalConvertersDefinitions.next ()
at new ExternalConverters (/app/lib/extension/externalConverters.ts:12:20)
at new Controller (/app/lib/controller.ts:84:58)

what can i do?
thanks

@raslr6 you are probably not using the latest dev https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html#linux

@Koenkk How can I look at it and if I don't have it, how is it updated, I don't have much skill even with all this, i have home assistant add-on thanks

@Koenkk I'm sorry, I didn't notice that edge was another version, it's already working, thank you very much

To be sure you are on the latest edge, uninstall and install the addon

Hello gentlemans,

Long time din't hear us. I hope you are doing fine.
I think I need your support again :| Apparently I buyed a second DDS238-2 zigbee, but apparently it's a different manufacture: TZE200_byzdayie, and again I can't see in zigbee2mqtt "produced energy" like in manufacture TZE200_bkkmqmyo. Can you give me some hints how to do it also for this device? It will be nice if I would get the same parameters for both of them, like in attached picture.

Thank you!

Hi,
I also observed that in TZE200_byzdayie the power is not give negative values, like power from TZE200_bkkmqmyo. Ca you please support me?
Thank you!