Created
October 2, 2018 11:50
-
-
Save Kunsi/1f6bbe10254a5d76411d2cbdd40f73bf to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Changing monitoring state from "Offline" to "Detecting serial port" | |
Serial port list: ['/dev/ttyACM0'] | |
Connecting to: /dev/ttyACM0 | |
Changing monitoring state from "Detecting serial port" to "Opening serial port" | |
Connected to: Serial<id=0x6b2fb390, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor | |
Changing monitoring state from "Opening serial port" to "Connecting" | |
Recv: echo:Unknown command: "echo: Last Updated: Aug 8 2016 11:27:24 | Author: (none, default config)" | |
Send: N0 M110 N0*125 | |
Recv: ok | |
Changing monitoring state from "Connecting" to "Operational" | |
Send: N1 M105*38 | |
Recv: Error:checksum mismatch, Last Line: 0 | |
Recv: Resend: 1 | |
Recv: ok | |
Send: N1 M105*38 | |
Recv: ok T:18.1 /0.0 B:18.1 /0.0 T0:18.1 /0.0 @:0 B@:0 | |
Send: N0 M110 N0*125 | |
Recv: Error:Line Number out of sequence. Expected: 2 Got: 1 | |
Recv: Resend: 2 | |
Printer requested line 2 but no sufficient history is available, can't resend | |
Recv: ok | |
Recv: ok | |
No response from printer after 3 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. | |
Changing monitoring state from "Operational" to "Offline (Error: Too many consecutive timeouts, printer still connected and alive?)" | |
Connection closed, closing down monitor | |
Changing monitoring state from "Offline" to "Detecting serial port" | |
Serial port list: ['/dev/ttyACM0'] | |
Connecting to: /dev/ttyACM0 | |
Changing monitoring state from "Detecting serial port" to "Opening serial port" | |
Connected to: Serial<id=0x73900d90, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor | |
Changing monitoring state from "Opening serial port" to "Connecting" | |
Send: N0 M110 N0*125 | |
Recv: ok | |
Changing monitoring state from "Connecting" to "Operational" | |
Send: N1 M105*38 | |
Recv: ok T:18.1 /0.0 B:18.1 /0.0 T0:18.1 /0.0 @:0 B@:0 | |
Send: N0 M110 N0*125 | |
Recv: ok | |
Send: N1 M115*39 | |
Recv: FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:3D Printer EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000 | |
Recv: ok | |
Send: M140 S90 | |
Recv: ok | |
Send: M104 S35 | |
Recv: ok | |
Send: M105 | |
Recv: ok T:21.5 /35.0 B:18.0 /90.0 T0:21.5 /35.0 @:127 B@:127 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment