pulseaudio -vv

I: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client3
D: [pulseaudio] protocol-native.c: Protocol version: remote 32, local 32
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: [pulseaudio] protocol-native.c: SHM possible: yes
D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
D: [pulseaudio] protocol-native.c: Memfd possible: yes
D: [pulseaudio] protocol-native.c: Negotiated SHM type: shared memfd
D: [pulseaudio] memblock.c: Using shared memfd memory pool with 1024 slots of size 64,0 KiB each, total size is 64,0 MiB, maximum usable slot size is 65472
D: [pulseaudio] srbchannel.c: SHM block is 65472 bytes, ringbuffer capacity is 2 * 32712 bytes
D: [pulseaudio] protocol-native.c: Enabling srbchannel...
I: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client4
D: [pulseaudio] protocol-native.c: Protocol version: remote 32, local 32
I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: [pulseaudio] protocol-native.c: SHM possible: yes
D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
D: [pulseaudio] protocol-native.c: Memfd possible: yes
D: [pulseaudio] protocol-native.c: Negotiated SHM type: shared memfd
D: [pulseaudio] memblock.c: Using shared memfd memory pool with 1024 slots of size 64,0 KiB each, total size is 64,0 MiB, maximum usable slot size is 65472
D: [pulseaudio] srbchannel.c: SHM block is 65472 bytes, ringbuffer capacity is 2 * 32712 bytes
D: [pulseaudio] protocol-native.c: Enabling srbchannel...
D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pavucontrol
D: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/pavucontrol.desktop.
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/applications/pavucontrol.desktop'
D: [pulseaudio] protocol-native.c: Client enabled srbchannel.
D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pavucontrol
D: [pulseaudio] protocol-native.c: Client enabled srbchannel.
D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
I: [pulseaudio] source-output.c: Trying to change sample rate
I: [pulseaudio] source.c: Cannot update rate, this is a monitor source and the sink is running.
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.usb-Focusrite_Scarlett_Solo_USB_Y77V1VK950F391-00.analog-stereo becomes busy, resuming.
D: [pulseaudio] resampler.c: Resampler:
D: [pulseaudio] resampler.c:   rate 44100 -> 25 (method peaks)
D: [pulseaudio] resampler.c:   format s32le -> float32le (intermediate float32le)
D: [pulseaudio] resampler.c:   channels 2 -> 1 (resampling 1)
D: [pulseaudio] resampler.c: Channel matrix:
D: [pulseaudio] resampler.c:        I00   I01 
D: [pulseaudio] resampler.c:     +------------
D: [pulseaudio] resampler.c: O00 | 0,500 0,500
I: [pulseaudio] remap.c: Using stereo to mono remapping
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=8, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=8, prebuf=0, minreq=8 maxrewind=0
I: [pulseaudio] source-output.c: Created output 0 "Peak detect" on alsa_output.usb-Focusrite_Scarlett_Solo_USB_Y77V1VK950F391-00.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "32"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "11497"
I: [pulseaudio] source-output.c:     application.process.user = "kunsi"
I: [pulseaudio] source-output.c:     application.process.host = "kunsi-t470"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_DK.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "0f0d22ad68c8401ab8837bea6b71e275"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
D: [alsa-sink-USB Audio] alsa-sink.c: Latency set to 40,00ms
D: [alsa-sink-USB Audio] alsa-sink.c: hwbuf_unused=691488
D: [alsa-sink-USB Audio] alsa-sink.c: setting avail_min=87760
D: [alsa-sink-USB Audio] alsa-sink.c: Requesting rewind due to latency change.
D: [alsa-sink-USB Audio] alsa-sink.c: Latency set to 40,00ms
D: [alsa-sink-USB Audio] alsa-sink.c: hwbuf_unused=691488
D: [alsa-sink-USB Audio] alsa-sink.c: setting avail_min=87760
D: [alsa-sink-USB Audio] alsa-sink.c: Requested to rewind 345744 bytes.
D: [alsa-sink-USB Audio] alsa-sink.c: Limited to 341656 bytes.
D: [alsa-sink-USB Audio] alsa-sink.c: before: 42707
D: [alsa-sink-USB Audio] alsa-sink.c: after: 42707
D: [alsa-sink-USB Audio] alsa-sink.c: Rewound 341656 bytes.
D: [alsa-sink-USB Audio] sink.c: Processing rewind...
D: [alsa-sink-USB Audio] sink-input.c: Have to rewind 341656 bytes on render memblockq.
D: [alsa-sink-USB Audio] source.c: Processing rewind...
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/record_stream0
D: [pulseaudio] source.c: alsa_output.usb-Focusrite_Scarlett_Solo_USB_Y77V1VK950F391-00.analog-stereo.monitor: state: IDLE -> RUNNING
D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
I: [pulseaudio] source-output.c: Trying to change sample rate
D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.usb-Focusrite_Scarlett_Solo_USB_Y77V1VK950F391-00.analog-stereo becomes busy, resuming.
I: [alsa-source-USB Audio] alsa-source.c: Trying resume...
I: [alsa-source-USB Audio] alsa-util.c: Cannot disable ALSA period wakeups
D: [alsa-source-USB Audio] alsa-util.c: Maximum hw buffer size is 2972 ms
D: [alsa-source-USB Audio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
I: [alsa-source-USB Audio] alsa-util.c: ALSA period wakeups were not disabled
D: [alsa-source-USB Audio] alsa-source.c: hwbuf_unused=0
D: [alsa-source-USB Audio] alsa-source.c: setting avail_min=87760
I: [alsa-source-USB Audio] alsa-source.c: Time scheduling watermark is 10,00ms
I: [alsa-source-USB Audio] alsa-source.c: Resumed successfully...
I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
D: [pulseaudio] source.c: alsa_input.usb-Focusrite_Scarlett_Solo_USB_Y77V1VK950F391-00.analog-stereo: suspend_cause: IDLE -> (none)
D: [pulseaudio] source.c: alsa_input.usb-Focusrite_Scarlett_Solo_USB_Y77V1VK950F391-00.analog-stereo: state: SUSPENDED -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.usb-Focusrite_Scarlett_Solo_USB_Y77V1VK950F391-00.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] resampler.c: Resampler:
D: [pulseaudio] resampler.c:   rate 44100 -> 25 (method peaks)
D: [pulseaudio] resampler.c:   format s32le -> float32le (intermediate float32le)
D: [pulseaudio] resampler.c:   channels 2 -> 1 (resampling 1)
D: [pulseaudio] resampler.c: Channel matrix:
D: [pulseaudio] resampler.c:        I00   I01 
D: [pulseaudio] resampler.c:     +------------
D: [pulseaudio] resampler.c: O00 | 0,500 0,500
I: [pulseaudio] remap.c: Using stereo to mono remapping
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=8, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=8, prebuf=0, minreq=8 maxrewind=0
I: [pulseaudio] source-output.c: Created output 1 "Peak detect" on alsa_input.usb-Focusrite_Scarlett_Solo_USB_Y77V1VK950F391-00.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "32"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "11497"
I: [pulseaudio] source-output.c:     application.process.user = "kunsi"
I: [pulseaudio] source-output.c:     application.process.host = "kunsi-t470"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_DK.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "0f0d22ad68c8401ab8837bea6b71e275"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
D: [alsa-source-USB Audio] alsa-source.c: latency set to 40,00ms
D: [alsa-source-USB Audio] alsa-source.c: hwbuf_unused=691488
D: [alsa-source-USB Audio] alsa-source.c: setting avail_min=1324
D: [alsa-source-USB Audio] alsa-source.c: latency set to 40,00ms
D: [alsa-source-USB Audio] alsa-source.c: hwbuf_unused=691488
D: [alsa-source-USB Audio] alsa-source.c: setting avail_min=1324
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/record_stream1
D: [pulseaudio] source.c: alsa_input.usb-Focusrite_Scarlett_Solo_USB_Y77V1VK950F391-00.analog-stereo: state: IDLE -> RUNNING
D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
I: [pulseaudio] source-output.c: Trying to change sample rate
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1f.3.analog-stereo becomes busy, resuming.
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
I: [alsa-sink-ALC298 Analog] alsa-sink.c: Trying resume...
I: [alsa-sink-ALC298 Analog] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [alsa-sink-ALC298 Analog] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [alsa-sink-ALC298 Analog] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
I: [alsa-sink-ALC298 Analog] alsa-util.c: ALSA period wakeups disabled
D: [alsa-sink-ALC298 Analog] alsa-sink.c: hwbuf_unused=0
D: [alsa-sink-ALC298 Analog] alsa-sink.c: setting avail_min=87319
I: [alsa-sink-ALC298 Analog] alsa-sink.c: Time scheduling watermark is 20,00ms
I: [alsa-sink-ALC298 Analog] alsa-sink.c: Resumed successfully...
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1f.3.analog-stereo: suspend_cause: IDLE -> (none)
D: [pulseaudio] sink.c: alsa_output.pci-0000_00_1f.3.analog-stereo: state: SUSPENDED -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1f.3.analog-stereo becomes idle, timeout in 5 seconds.
I: [alsa-sink-ALC298 Analog] alsa-sink.c: Starting playback.
D: [alsa-sink-ALC298 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC298 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor: suspend_cause: IDLE -> (none)
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor: state: SUSPENDED -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1f.3.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] resampler.c: Resampler:
D: [pulseaudio] resampler.c:   rate 44100 -> 25 (method peaks)
D: [pulseaudio] resampler.c:   format s16le -> float32le (intermediate s16le)
D: [pulseaudio] resampler.c:   channels 2 -> 1 (resampling 1)
D: [pulseaudio] resampler.c: Channel matrix:
D: [pulseaudio] resampler.c:        I00   I01 
D: [pulseaudio] resampler.c:     +------------
D: [pulseaudio] resampler.c: O00 | 0,500 0,500
I: [pulseaudio] remap.c: Using stereo to mono remapping
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] source-output.c: Created output 2 "Peak detect" on alsa_output.pci-0000_00_1f.3.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "32"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "11497"
I: [pulseaudio] source-output.c:     application.process.user = "kunsi"
I: [pulseaudio] source-output.c:     application.process.host = "kunsi-t470"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_DK.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "0f0d22ad68c8401ab8837bea6b71e275"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
D: [alsa-sink-ALC298 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC298 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
D: [alsa-sink-ALC298 Analog] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-ALC298 Analog] alsa-sink.c: Latency set to 40,00ms
D: [alsa-sink-ALC298 Analog] alsa-sink.c: hwbuf_unused=345744
D: [alsa-sink-ALC298 Analog] alsa-sink.c: setting avail_min=87319
D: [alsa-sink-ALC298 Analog] alsa-sink.c: Requesting rewind due to latency change.
D: [alsa-sink-ALC298 Analog] alsa-sink.c: Latency set to 40,00ms
D: [alsa-sink-ALC298 Analog] alsa-sink.c: hwbuf_unused=345744
D: [alsa-sink-ALC298 Analog] alsa-sink.c: setting avail_min=87319
D: [alsa-sink-ALC298 Analog] alsa-sink.c: Requested to rewind 352800 bytes.
D: [alsa-sink-ALC298 Analog] alsa-sink.c: Limited to 352320 bytes.
D: [alsa-sink-ALC298 Analog] alsa-sink.c: before: 88080
D: [alsa-sink-ALC298 Analog] alsa-sink.c: after: 88080
D: [alsa-sink-ALC298 Analog] alsa-sink.c: Rewound 352320 bytes.
D: [alsa-sink-ALC298 Analog] sink.c: Processing rewind...
D: [alsa-sink-ALC298 Analog] sink.c: latency = 2292
D: [alsa-sink-ALC298 Analog] source.c: Processing rewind...
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/record_stream2
D: [pulseaudio] source.c: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor: state: IDLE -> RUNNING
D: [pulseaudio] module-stream-restore.c: Not restoring device for stream source-output-by-application-id:org.PulseAudio.pavucontrol, because already set
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
I: [pulseaudio] source-output.c: Trying to change sample rate
D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1f.3.analog-stereo becomes busy, resuming.
I: [alsa-source-ALC298 Analog] alsa-source.c: Trying resume...
I: [alsa-source-ALC298 Analog] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [alsa-source-ALC298 Analog] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [alsa-source-ALC298 Analog] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
I: [alsa-source-ALC298 Analog] alsa-util.c: ALSA period wakeups disabled
D: [alsa-source-ALC298 Analog] alsa-source.c: hwbuf_unused=0
D: [alsa-source-ALC298 Analog] alsa-source.c: setting avail_min=87319
I: [alsa-source-ALC298 Analog] alsa-source.c: Time scheduling watermark is 20,00ms
I: [alsa-source-ALC298 Analog] alsa-source.c: Resumed successfully...
I: [alsa-source-ALC298 Analog] alsa-source.c: Starting capture.
D: [pulseaudio] source.c: alsa_input.pci-0000_00_1f.3.analog-stereo: suspend_cause: IDLE -> (none)
D: [pulseaudio] source.c: alsa_input.pci-0000_00_1f.3.analog-stereo: state: SUSPENDED -> IDLE
D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1f.3.analog-stereo becomes idle, timeout in 5 seconds.
D: [pulseaudio] resampler.c: Resampler:
D: [pulseaudio] resampler.c:   rate 44100 -> 25 (method peaks)
D: [pulseaudio] resampler.c:   format s16le -> float32le (intermediate s16le)
D: [pulseaudio] resampler.c:   channels 2 -> 1 (resampling 1)
D: [pulseaudio] resampler.c: Channel matrix:
D: [pulseaudio] resampler.c:        I00   I01 
D: [pulseaudio] resampler.c:     +------------
D: [pulseaudio] resampler.c: O00 | 0,500 0,500
I: [pulseaudio] remap.c: Using stereo to mono remapping
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: [pulseaudio] source-output.c: Created output 3 "Peak detect" on alsa_input.pci-0000_00_1f.3.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "32"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "11497"
I: [pulseaudio] source-output.c:     application.process.user = "kunsi"
I: [pulseaudio] source-output.c:     application.process.host = "kunsi-t470"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_DK.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "0f0d22ad68c8401ab8837bea6b71e275"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
D: [alsa-source-ALC298 Analog] alsa-source.c: latency set to 40,00ms
D: [alsa-source-ALC298 Analog] alsa-source.c: hwbuf_unused=345744
D: [alsa-source-ALC298 Analog] alsa-source.c: setting avail_min=883
D: [alsa-source-ALC298 Analog] alsa-source.c: latency set to 40,00ms
D: [alsa-source-ALC298 Analog] alsa-source.c: hwbuf_unused=345744
D: [alsa-source-ALC298 Analog] alsa-source.c: setting avail_min=883
D: [alsa-source-ALC298 Analog] alsa-source.c: Requested volume: front-left: 18904 /  29% / -32,40 dB,   front-right: 18904 /  29% / -32,40 dB
D: [alsa-source-ALC298 Analog] alsa-source.c: Got hardware volume: front-left: 18830 /  29% / -32,50 dB,   front-right: 18830 /  29% / -32,50 dB
D: [alsa-source-ALC298 Analog] alsa-source.c: Calculated software volume: front-left: 65794 / 100% / 0,10 dB,   front-right: 65794 / 100% / 0,10 dB (accurate-enough=yes)
D: [alsa-source-ALC298 Analog] source.c: Volume not changing
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/record_stream3
D: [pulseaudio] source.c: alsa_input.pci-0000_00_1f.3.analog-stereo: state: IDLE -> RUNNING
D: [pulseaudio] module-intended-roles.c: Not setting device for stream Peak detect, because already set.
D: [pulseaudio] source-output.c: Negotiated format: pcm, format.sample_format = "\"float32le\""  format.rate = "25"  format.channels = "1"  format.channel_map = "\"mono\""
I: [pulseaudio] source-output.c: Trying to change sample rate
I: [pulseaudio] source.c: Cannot update rate, SOURCE_IS_RUNNING, will keep using 44100 Hz
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.usb-Focusrite_Scarlett_Solo_USB_Y77V1VK950F391-00.analog-stereo becomes busy, resuming.
D: [pulseaudio] resampler.c: Resampler:
D: [pulseaudio] resampler.c:   rate 44100 -> 25 (method peaks)
D: [pulseaudio] resampler.c:   format s32le -> float32le (intermediate float32le)
D: [pulseaudio] resampler.c:   channels 2 -> 1 (resampling 1)
D: [pulseaudio] resampler.c: Channel matrix:
D: [pulseaudio] resampler.c:        I00   I01 
D: [pulseaudio] resampler.c:     +------------
D: [pulseaudio] resampler.c: O00 | 0,500 0,500
I: [pulseaudio] remap.c: Using stereo to mono remapping
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=8, prebuf=0, minreq=1 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=8, prebuf=0, minreq=8 maxrewind=0
I: [pulseaudio] source-output.c: Created output 4 "Peak detect" on alsa_output.usb-Focusrite_Scarlett_Solo_USB_Y77V1VK950F391-00.analog-stereo.monitor with sample spec float32le 1ch 25Hz and channel map mono
I: [pulseaudio] source-output.c:     media.name = "Peak detect"
I: [pulseaudio] source-output.c:     application.name = "PulseAudio Volume Control"
I: [pulseaudio] source-output.c:     native-protocol.peer = "UNIX socket client"
I: [pulseaudio] source-output.c:     native-protocol.version = "32"
I: [pulseaudio] source-output.c:     application.id = "org.PulseAudio.pavucontrol"
I: [pulseaudio] source-output.c:     application.icon_name = "audio-card"
I: [pulseaudio] source-output.c:     application.version = "4.0"
I: [pulseaudio] source-output.c:     application.process.id = "11497"
I: [pulseaudio] source-output.c:     application.process.user = "kunsi"
I: [pulseaudio] source-output.c:     application.process.host = "kunsi-t470"
I: [pulseaudio] source-output.c:     application.process.binary = "pavucontrol"
I: [pulseaudio] source-output.c:     application.language = "en_DK.UTF-8"
I: [pulseaudio] source-output.c:     window.x11.display = ":0"
I: [pulseaudio] source-output.c:     application.process.machine_id = "0f0d22ad68c8401ab8837bea6b71e275"
I: [pulseaudio] source-output.c:     application.process.session_id = "1"
I: [pulseaudio] source-output.c:     module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=0, base=4, prebuf=1, minreq=0 maxrewind=0
D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=4194304, base=4, prebuf=4, minreq=4 maxrewind=0
I: [pulseaudio] protocol-native.c: Final latency 80,00 ms = 40,00 ms + 40,00 ms
D: [alsa-sink-USB Audio] alsa-sink.c: Latency set to 40,00ms
D: [alsa-sink-USB Audio] alsa-sink.c: hwbuf_unused=691488
D: [alsa-sink-USB Audio] alsa-sink.c: setting avail_min=87760
D: [alsa-sink-USB Audio] alsa-sink.c: Latency set to 40,00ms
D: [alsa-sink-USB Audio] alsa-sink.c: hwbuf_unused=691488
D: [alsa-sink-USB Audio] alsa-sink.c: setting avail_min=87760
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/record_stream4
D: [alsa-sink-USB Audio] alsa-sink.c: Wakeup from ALSA!