odroid-c2-boot.log

GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;CHK:0;

set vcck to 1100 mv
set vddee to 1050 mv
CPU clk: 1536MHz

U-Boot SPL 2023.10-rc4 (Sep 20 2023 - 18:19:45 +0000)
Trying to boot from SD
spl_load_simple_fit_skip_processing: disable watchdog
spl_load_simple_fit_skip_processing: watchdog=1205dbf
Sending bl30........................................OK.
Run bl30...
Wait bl30...Done
Sending bl301.......OK.
Run bl301...


--- UART initialized after reboot ---
[Reset cause: unknown]
[Image: unknown, amlogic_v1.1.3046-00db630-dirty 2016-08-31 09:24:14 tao.zeng@droid04]
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: ef be ad de d f0 ad ba ef be ad de not ES chip
[0.383210 Inits done]
secure task start!
high task start!
low task start!
NOTICE:  BL31: lts-v2.8.8(release):
NOTICE:  BL31: Built : 18:10:21, Sep 20 2023
INFO:    ARM GICv2 driver initialized
INFO:    BL31: Initializing runtime services
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x1000000
INFO:    SPSR = 0x3c9


U-Boot 2023.10-rc4 (Sep 20 2023 - 18:19:45 +0000) odroid-c2

Model: Hardkernel ODROID-C2
show_board_info: socinfo=1f000b01
SoC:   Amlogic Meson GXBB (S905) Revision 1f:b (0:1)
DRAM:  2 GiB
Core:  165 devices, 27 uclasses, devicetree: separate
MMC:   mmc@72000: 0, mmc@74000: 1
Loading Environment from nowhere... OK
In:    usbkbd,serial
Out:   vidconsole,serial
Err:   vidconsole,serial
Net:   eth0: ethernet@c9410000
Hit any key to stop autoboot:  0
=>
=>
=> bdinfo
boot_params = 0x0000000000000000
DRAM bank   = 0x0000000000000000
-> start    = 0x0000000000000000
-> size     = 0x0000000080000000
flashstart  = 0x0000000000000000
flashsize   = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate    = 115200 bps
relocaddr   = 0x000000007df4e000
reloc off   = 0x000000007cf4e000
Build       = 64-bit
current eth = ethernet@c9410000
ethaddr     = 00:1e:06:33:14:a7
IP addr     = <NULL>
fdt_blob    = 0x000000007bf41a60
new_fdt     = 0x000000007bf41a60
fdt_size    = 0x000000000000a340
Video       = vpu@d0100000 active
FB base     = 0x000000007fe5b000
FB size     = 720x576x32
lmb_dump_all:
 memory.cnt = 0x1 / max = 0x10
 memory[0]      [0x0-0x7fffffff], 0x80000000 bytes flags: 0
 reserved.cnt = 0x5 / max = 0x10
 reserved[0]    [0x0-0xffffff], 0x01000000 bytes flags: 4
 reserved[1]    [0x5000000-0x52fffff], 0x00300000 bytes flags: 4
 reserved[2]    [0x10000000-0x101fffff], 0x00200000 bytes flags: 4
 reserved[3]    [0x7af3d000-0x7fffffff], 0x050c3000 bytes flags: 0
 reserved[4]    [0x7bf3d470-0x7fffffff], 0x040c2b90 bytes flags: 0
devicetree  = separate
arch_number = 0x0000000000000000
TLB addr    = 0x000000007fff0000
irq_sp      = 0x000000007bf41a50
sp start    = 0x000000007bf41a50
Early malloc usage: 1478 / 2000
=>