MiniArch-20230212-6.2.11-board-h616.tanix_tx6s_axp313-SD-Image-DebugUART.txt

Boot SPL 2021.04 (Apr 17 2023 - 21:10:33 +0200)
DRAM: 4096 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.8(debug):v12.13.1-v34-Pre-89-g0363c0dd1b-68-gc3131523-dirty
NOTICE:  BL31: Built : 20:57:15, Apr 17 2023
NOTICE:  BL31: Detected Allwinner H616 SoC (1823)
NOTICE:  BL31: Found U-Boot DTB at 0x4a087088, model: Tanix TX6s (axp313)
INFO:    ARM GICv2 driver initialized
INFO:    Configuring SPC Controller
INFO:    PMIC: Probing AXP305 on RSB
ERROR:   RSB: set run-time address: 0x10003
INFO:    Could not init RSB: -65539
INFO:    BL31: Platform setup done
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a53: CPU workaround for 855873 was applied
INFO:    BL31: cortex_a53: CPU workaround for 1530924 was applied
INFO:    PSCI: Suspend is unavailable
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x4a000000
INFO:    SPSR = 0x3c9
INFO:    Changed devicetree.


U-Boot 2021.04 (Apr 17 2023 - 21:10:33 +0200) Allwinner Technology

CPU:   Allwinner H616 (SUN50I)
Model: Tanix TX6s (axp313)
I2C:   ready
DRAM:  4 GiB
MMC:   mmc@4020000: 0, mmc@4021000: 3, mmc@4022000: 2
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... In:    serial@5000000
Out:   serial@5000000
Err:   serial@5000000
Net:   phy interface6
Could not get PHY for ethernet@5030000: addr 1
No ethernet found.

starting USB...
No working controllers found
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
1532 bytes read in 1 ms (1.5 MiB/s)
## Executing script at 4fc00000
32117248 bytes read in 2642 ms (11.6 MiB/s)
Failed to load '/h616_dtb'
28260 bytes read in 6 ms (4.5 MiB/s)
7327992 bytes read in 604 ms (11.6 MiB/s)
Moving Image from 0x40080000 to 0x40200000, end=42140000
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
   Loading Ramdisk to 49902000, end 49fff0f8 ... OK
   Loading Device Tree to 00000000498f8000, end 0000000049901fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.2.11 (piotro@minimyth2-aarch64) (aarch64-minimyth-linux-gnu-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40) #1 SMP PREEMPT Mon Apr 17 10:25:45 CEST 2023
[    0.000000] Machine model: Tanix TX6s (axp313)
[    0.000000] efi: UEFI not found.
[    0.000000] earlycon: uart0 at MMIO32 0x0000000005000000 (options '115200n8')
[    0.000000] printk: bootconsole [uart0] enabled
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x000000004007ffff]
[    0.000000]   node   0: [mem 0x0000000040080000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff]
[    0.000000] cma: Reserved 64 MiB at 0x00000000fc000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 29 pages/cpu s80872 r8192 d29720 u118784
[    0.000000] pcpu-alloc: s80872 r8192 d29720 u118784 alloc=29*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032192
[    0.000000] Kernel command line: root=PARTUUID=346d1a6a-02 rw rootwait earlycon console=ttyS0,115200n8 logo.nologo vt.cur_default=1 deferred_probe_timeout=0 debug MM_DEBUG=yes
[    0.000000] Unknown kernel command line parameters "MM_DEBUG=yes", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000f8000000-0x00000000fc000000] (64MB)
[    0.000000] Memory: 3942224K/4194304K available (14592K kernel code, 3524K rwdata, 6416K rodata, 6720K init, 576K bss, 186544K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 51204 entries in 201 pages
[    0.000000] ftrace: allocated 201 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.009319] Console: colour dummy device 80x25
[    0.014182] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.025315] pid_max: default: 32768 minimum: 301
[    0.030466] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.038516] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.048039] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.055536] cblist_init_generic: Setting adjustable number of callback queues.
[    0.063408] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.070128] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.076844] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.083721] rcu: Hierarchical SRCU implementation.
[    0.088931] rcu:     Max phase no-delay instances is 1000.
[    0.097014] EFI services will not be available.
[    0.102730] smp: Bringing up secondary CPUs ...
[    0.108502] Detected VIPT I-cache on CPU1
[    0.108585] cacheinfo: Unable to detect cache hierarchy for CPU 1
[    0.108637] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.109554] Detected VIPT I-cache on CPU2
[    0.109633] cacheinfo: Unable to detect cache hierarchy for CPU 2
[    0.109679] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.110595] Detected VIPT I-cache on CPU3
[    0.110675] cacheinfo: Unable to detect cache hierarchy for CPU 3
[    0.110720] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.110862] smp: Brought up 1 node, 4 CPUs
[    0.169214] SMP: Total of 4 processors activated.
[    0.174288] CPU features: detected: 32-bit EL0 Support
[    0.179815] CPU features: detected: 32-bit EL1 Support
[    0.185390] CPU features: detected: CRC32 instructions
[    0.191022] CPU: All CPU(s) started at EL2
[    0.195488] alternatives: applying system-wide alternatives
[    0.203690] devtmpfs: initialized
[    0.216763] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.227364] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.236864] pinctrl core: initialized pinctrl subsystem
[    0.243542] DMI not present or invalid.
[    0.248333] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.256608] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.264424] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.273124] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.281770] audit: initializing netlink subsys (disabled)
[    0.287902] audit: type=2000 audit(0.143:1): state=initialized audit_enabled=0 res=1
[    0.289114] thermal_sys: Registered thermal governor 'fair_share'
[    0.296318] thermal_sys: Registered thermal governor 'bang_bang'
[    0.302898] thermal_sys: Registered thermal governor 'step_wise'
[    0.309379] thermal_sys: Registered thermal governor 'user_space'
[    0.315923] cpuidle: using governor ladder
[    0.326982] cpuidle: using governor menu
[    0.331413] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.338881] ASID allocator initialised with 65536 entries
[    0.345347] Serial: AMBA PL011 UART driver
[    0.365579] platform 6000000.hdmi: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[    0.375164] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000
[    0.384842] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000
[    0.398380] platform 6000000.hdmi: Fixed dependency cycle(s) with /connector
[    0.409711] cryptd: max_cpu_qlen set to 1000
[    0.415430] ACPI: Interpreter disabled.
[    0.421095] iommu: Default domain type: Translated 
[    0.426392] iommu: DMA domain TLB invalidation policy: strict mode 
[    0.434043] SCSI subsystem initialized
[    0.438408] usbcore: registered new interface driver usbfs
[    0.444377] usbcore: registered new interface driver hub
[    0.450202] usbcore: registered new device driver usb
[    0.456452] pps_core: LinuxPPS API ver. 1 registered
[    0.461849] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.471730] PTP clock support registered
[    0.476957] Advanced Linux Sound Architecture Driver Initialized.
[    0.484670] vgaarb: loaded
[    0.488156] clocksource: Switched to clocksource arch_sys_counter
[    0.495577] pnp: PnP ACPI: disabled
[    0.510199] NET: Registered PF_INET protocol family
[    0.515834] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.527364] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.536703] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.545092] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.553909] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.562874] TCP: Hash tables configured (established 32768 bind 32768)
[    0.570172] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.577517] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.585502] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.592309] RPC: Registered named UNIX socket transport module.
[    0.598729] RPC: Registered udp transport module.
[    0.603808] RPC: Registered tcp transport module.
[    0.608867] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.615863] NET: Registered PF_XDP protocol family
[    0.621068] PCI: CLS 0 bytes, default 64
[    0.625874] Trying to unpack rootfs image as initramfs...
[    0.635906] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.645669] kvm [1]: IPA Size Limit: 40 bits
[    0.652199] kvm [1]: vgic interrupt IRQ9
[    0.656743] kvm [1]: Hyp mode initialized successfully
[    0.980580] Freeing initrd memory: 7156K
[    1.541960] Initialise system trusted keyrings
[    1.547188] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    1.554314] zbud: loaded
[    1.557696] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.564582] NFS: Registering the id_resolver key type
[    1.570104] Key type id_resolver registered
[    1.574631] Key type id_legacy registered
[    1.579003] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.586287] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.637461] NET: Registered PF_ALG protocol family
[    1.642690] Key type asymmetric registered
[    1.647159] Asymmetric key parser 'x509' registered
[    1.652439] Asymmetric key parser 'pkcs8' registered
[    1.657831] Key type pkcs7_test registered
[    1.662359] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.670640] io scheduler mq-deadline registered
[    1.675561] io scheduler kyber registered
[    1.679943] io scheduler bfq registered
[    1.695413] EINJ: ACPI disabled.
[    1.720390] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.730392] Serial: AMBA driver
[    1.745037] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.760062] usbcore: registered new interface driver usb-storage
[    1.766652] usbcore: registered new interface driver ums-realtek
[    1.773282] usbcore: registered new interface driver usbserial_generic
[    1.780354] usbserial: USB Serial support registered for generic
[    1.789290] mousedev: PS/2 mouse device common for all mice
[    1.797130] sun6i-rtc 7000000.rtc: registered as rtc0
[    1.802650] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-02T00:00:07 UTC (86407)
[    1.811755] sun6i-rtc 7000000.rtc: RTC enabled
[    1.817650] mv64xxx_i2c 5002c00.i2c: can't get pinctrl, bus recovery not supported
[    1.830464] sdhci: Secure Digital Host Controller Interface driver
[    1.837227] sdhci: Copyright(c) Pierre Ossman
[    1.842306] Synopsys Designware Multimedia Card Interface Driver
[    1.850834] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.858590] ledtrig-cpu: registered to indicate activity on CPUs
[    1.866273] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000000
[    1.873437] hid: raw HID events driver (C) Jiri Kosina
[    1.879141] usbcore: registered new interface driver usbhid
[    1.885186] usbhid: USB HID core driver
[    1.913834] sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed
[    1.921249] NET: Registered PF_PACKET protocol family
[    1.927095] Key type dns_resolver registered
[    1.943861] registered taskstats version 1
[    1.948563] Loading compiled-in X.509 certificates
[    1.954179] zswap: loaded using pool lzo/zbud
[    1.979706] sun8i-mixer 1100000.mixer: Adding to iommu group 0
[    1.989461] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    2.008837] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
[    2.019521] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
[    2.029929] printk: console [ttyS0] disabled
[    2.034680] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 286, base_baud = 1500000) is a 16550A
[    2.044262] printk: console [ttyS0] enabled
[    2.044262] printk: console [ttyS0] enabled
[    2.052961] printk: bootconsole [uart0] disabled
[    2.052961] printk: bootconsole [uart0] disabled
[    2.066203] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pg not found, using dummy regulator
[    2.075829] 5000400.serial: ttyS1 at MMIO 0x5000400 (irq = 287, base_baud = 1500000) is a 16550A
[    2.084879] serial serial0: tty port ttyS1 registered
[    2.093640] phy phy-5100400.phy.0: Changing dr_mode to 1
[    2.094759] ehci-platform 5200000.usb: EHCI Host Controller
[    2.096260] ehci-platform 5310000.usb: EHCI Host Controller
[    2.096294] ehci-platform 5310000.usb: new USB bus registered, assigned bus number 1
[    2.096506] ehci-platform 5310000.usb: irq 290, io mem 0x05310000
[    2.098271] ehci-platform 5311000.usb: EHCI Host Controller
[    2.098304] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 2
[    2.098480] ehci-platform 5311000.usb: irq 291, io mem 0x05311000
[    2.099046] ehci-platform 5101000.usb: EHCI Host Controller
[    2.100216] ohci-platform 5101400.usb: Generic Platform OHCI controller
[    2.100253] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 3
[    2.100440] ohci-platform 5101400.usb: irq 292, io mem 0x05101400
[    2.101581] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests
[    2.104177] mv64xxx_i2c 7081400.i2c: can't get pinctrl, bus recovery not supported
[    2.104675] ehci-platform 5200000.usb: new USB bus registered, assigned bus number 4
[    2.104879] ehci-platform 5310000.usb: USB 2.0 started, EHCI 1.00
[    2.104893] dw-apb-uart 5000400.serial: Failed to create device link (0x180) with 1-0036
[    2.105276] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[    2.105288] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.105296] usb usb1: Product: EHCI Host Controller
[    2.105302] usb usb1: Manufacturer: Linux 6.2.11 ehci_hcd
[    2.105308] usb usb1: SerialNumber: 5310000.usb
[    2.105595] axp20x-i2c 1-0036: AXP20x variant AXP313a found
[    2.106974] hub 1-0:1.0: USB hub found
[    2.107043] hub 1-0:1.0: 1 port detected
[    2.108067] ohci-platform 5310400.usb: Generic Platform OHCI controller
[    2.108098] ohci-platform 5310400.usb: new USB bus registered, assigned bus number 5
[    2.108388] ohci-platform 5310400.usb: irq 295, io mem 0x05310400
[    2.108897] ohci-platform 5311400.usb: Generic Platform OHCI controller
[    2.108922] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6
[    2.109110] ohci-platform 5311400.usb: irq 296, io mem 0x05311400
[    2.109453] ohci-platform 5200400.usb: Generic Platform OHCI controller
[    2.109473] ohci-platform 5200400.usb: new USB bus registered, assigned bus number 7
[    2.109612] ohci-platform 5200400.usb: irq 297, io mem 0x05200400
[    2.110308] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 8
[    2.118175] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
[    2.118190] ehci-platform 5200000.usb: irq 289, io mem 0x05200000
[    2.124272] ehci-platform 5101000.usb: irq 288, io mem 0x05101000
[    2.130847] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[    2.131507] ehci-platform 5200000.usb: USB 2.0 started, EHCI 1.00
[    2.148168] axp20x-i2c 1-0036: AXP20X driver loaded
[    2.148179] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
[    2.149134] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.155781] dw-apb-uart 5000400.serial: Failed to create device link (0x180) with 1-0036
[    2.167600] usb usb2: Product: EHCI Host Controller
[    2.175233] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1032000 KHz, changing to: 1200000 KHz
[    2.178826] usb usb2: Manufacturer: Linux 6.2.11 ehci_hcd
[    2.178833] usb usb2: SerialNumber: 5311000.usb
[    2.191756] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
[    2.196952] sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed
[    2.200812] hub 2-0:1.0: USB hub found
[    2.202826] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pc not found, using dummy regulator
[    2.209217] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    2.216681] hub 2-0:1.0: 1 port detected
[    2.224220] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
[    2.227405] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[    2.228174] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
[    2.229329] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[    2.234147] dw-apb-uart 5000400.serial: Failed to create device link (0x180) with 7022000.pinctrl
[    2.238666] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.245193] sun4i-drm display-engine: Adding to iommu group 0
[    2.247980] usb usb4: Product: EHCI Host Controller
[    2.252356] debugfs: Directory '1100000.mixer' with parent 'regmap' already present!
[    2.258619] usb usb4: Manufacturer: Linux 6.2.11 ehci_hcd
[    2.262661] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.264488] mmc0: new high speed SDXC card at address 59b4
[    2.265420] mmcblk0: mmc0:59b4 SD64G 59.4 GiB 
[    2.266357] debugfs: Directory '1100000.mixer' with parent 'regmap' already present!
[    2.268686]  mmcblk0: p1 p2
[    2.272410] usb usb4: SerialNumber: 5200000.usb
[    2.288956] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops)
[    2.293404] hub 4-0:1.0: USB hub found
[    2.299736] sun4i-drm display-engine: bound 6510000.tcon-top (ops sun8i_tcon_top_ops)
[    2.307250] hub 4-0:1.0: 1 port detected
[    2.313721] sun4i-drm display-engine: bound 6515000.lcd-controller (ops sun4i_tcon_ops)
[    2.503151] mmc2: new DDR MMC card at address 0001
[    2.506830] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
[    2.514415] mmcblk2: mmc2:0001 CGND3R 58.2 GiB 
[    2.519588] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
[    2.529240]  mmcblk2: p1 p2
[    2.533310] hdmi_codec_probe: using aw-hdmi-codec-quirk for H616
[    2.537938] mmcblk2boot0: mmc2:0001 CGND3R 4.00 MiB 
[    2.545862] sun4i-drm display-engine: bound 6000000.hdmi (ops sun8i_dw_hdmi_ops)
[    2.549559] mmcblk2boot1: mmc2:0001 CGND3R 4.00 MiB 
[    2.552873] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[    2.755697] ------------[ cut here ]------------