Skip to content

Instantly share code, notes, and snippets.

@Leask
Created June 15, 2021 02:39
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save Leask/fc027119a758a5b09fbd7b60ed636832 to your computer and use it in GitHub Desktop.
Save Leask/fc027119a758a5b09fbd7b60ed636832 to your computer and use it in GitHub Desktop.
Smartctl INFORMATION
root@Foundation:/etc# smartctl -x /dev/sdb
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-16-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
Device Model: TOSHIBA DT01ACA200
Serial Number: 99JHDDEGS
LU WWN Device Id: 5 000039 fdbc7001e
Add. Product Id: DELL(tm)
Firmware Version: MX4OAD30
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Jun 12 15:01:33 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (14918) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 249) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance --S--- 137 137 000 - 77
3 Spin_Up_Time POS--- 153 153 024 - 247 (Average 247)
4 Start_Stop_Count -O--C- 099 099 000 - 7253
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate -O-R-- 100 100 000 - 0
8 Seek_Time_Performance --S--- 124 124 000 - 33
9 Power_On_Hours -O--C- 099 099 000 - 12794
10 Spin_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 131
192 Power-Off_Retract_Count -O--CK 091 091 000 - 11871
193 Load_Cycle_Count -O--C- 091 091 000 - 11871
194 Temperature_Celsius -O---- 183 183 000 - 30 (Min/Max 21/58)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 251
240 Head_Flying_Hours -O--C- 100 100 000 - 6264
241 Total_LBAs_Written -O--C- 100 100 000 - 160998461183
242 Total_LBAs_Read -O--C- 100 100 000 - 6255764412
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 251 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 251 [2] occurred at disk power-on lifetime: 4756 hours (198 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 21 00 00 15 11 e5 bf 05 00 Error: ICRC, ABRT at LBA = 0x1511e5bf = 353494463
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 48 00 00 15 11 e7 e0 40 00 09:18:18.709 READ FPDMA QUEUED
60 00 f0 00 10 00 00 15 11 e6 f0 40 00 09:18:18.709 READ FPDMA QUEUED
60 00 f0 00 30 00 00 15 11 e6 00 40 00 09:18:18.709 READ FPDMA QUEUED
60 00 20 00 08 00 00 15 11 e5 e0 40 00 09:18:18.709 READ FPDMA QUEUED
60 00 f0 00 68 00 00 15 11 e4 f0 40 00 09:18:18.709 READ FPDMA QUEUED
Error 250 [1] occurred at disk power-on lifetime: 4756 hours (198 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 11 36 61 ff 01 00 Error: ICRC, ABRT at LBA = 0x113661ff = 288776703
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 28 00 00 11 36 63 e0 40 00 09:14:42.663 READ FPDMA QUEUED
60 00 f0 00 68 00 00 11 36 62 f0 40 00 09:14:42.663 READ FPDMA QUEUED
60 00 f0 00 30 00 00 11 36 62 00 40 00 09:14:42.663 READ FPDMA QUEUED
60 00 20 00 48 00 00 11 36 61 e0 40 00 09:14:42.662 READ FPDMA QUEUED
60 00 f0 00 08 00 00 11 36 60 f0 40 00 09:14:42.662 READ FPDMA QUEUED
Error 249 [0] occurred at disk power-on lifetime: 4756 hours (198 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 a1 00 00 10 bc 15 3f 00 00 Error: ICRC, ABRT at LBA = 0x10bc153f = 280761663
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 38 00 00 10 bc 15 e0 40 00 09:14:04.904 READ FPDMA QUEUED
60 00 f0 00 20 00 00 10 bc 14 f0 40 00 09:14:04.904 READ FPDMA QUEUED
60 00 f0 00 00 00 00 10 bc 14 00 40 00 09:14:04.904 READ FPDMA QUEUED
60 00 20 00 10 00 00 10 bc 13 e0 40 00 09:14:04.902 READ FPDMA QUEUED
60 00 f0 00 50 00 00 10 bc 12 f0 40 00 09:14:04.902 READ FPDMA QUEUED
Error 248 [3] occurred at disk power-on lifetime: 4756 hours (198 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 d1 00 00 11 34 ab 0f 01 00 Error: ICRC, ABRT at LBA = 0x1134ab0f = 288664335
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 38 00 00 11 34 ad e0 40 00 09:13:16.296 READ FPDMA QUEUED
60 00 f0 00 30 00 00 11 34 ac f0 40 00 09:13:16.296 READ FPDMA QUEUED
60 00 f0 00 10 00 00 11 34 ac 00 40 00 09:13:16.296 READ FPDMA QUEUED
60 00 20 00 60 00 00 11 34 ab e0 40 00 09:13:16.295 READ FPDMA QUEUED
60 00 f0 00 08 00 00 11 34 aa f0 40 00 09:13:16.295 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4574 -
# 2 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: SMART Off-line Data Collection executing in background (4)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 30/30 Celsius
Lifetime Min/Max Temperature: 21/58 Celsius
Lifetime Average Temperature: 36 Celsius
Under/Over Temperature Limit Count: 0/408
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 15/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 478 (447)
Index Estimated Time Temperature Celsius
448 2021-06-12 07:04 30 ***********
... ..(355 skipped). .. ***********
326 2021-06-12 13:00 30 ***********
327 2021-06-12 13:01 31 ************
... ..( 37 skipped). .. ************
365 2021-06-12 13:39 31 ************
366 2021-06-12 13:40 30 ***********
367 2021-06-12 13:41 30 ***********
368 2021-06-12 13:42 31 ************
369 2021-06-12 13:43 30 ***********
... ..( 40 skipped). .. ***********
410 2021-06-12 14:24 30 ***********
411 2021-06-12 14:25 29 **********
412 2021-06-12 14:26 30 ***********
413 2021-06-12 14:27 ? -
414 2021-06-12 14:28 ? -
415 2021-06-12 14:29 30 ***********
... ..( 3 skipped). .. ***********
419 2021-06-12 14:33 30 ***********
420 2021-06-12 14:34 ? -
421 2021-06-12 14:35 ? -
422 2021-06-12 14:36 30 ***********
... ..( 24 skipped). .. ***********
447 2021-06-12 15:01 30 ***********
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 131 --- Lifetime Power-On Resets
0x01 0x010 4 12794 --- Power-on Hours
0x01 0x018 6 160998461183 --- Logical Sectors Written
0x01 0x020 6 376984277 --- Number of Write Commands
0x01 0x028 6 6255764412 --- Logical Sectors Read
0x01 0x030 6 149336621 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 6265 --- Spindle Motor Power-on Hours
0x03 0x010 4 6264 --- Head Flying Hours
0x03 0x018 4 11871 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 6 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 11 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 30 --- Current Temperature
0x05 0x010 1 30 N-- Average Short Term Temperature
0x05 0x018 1 33 N-- Average Long Term Temperature
0x05 0x020 1 58 --- Highest Temperature
0x05 0x028 1 21 --- Lowest Temperature
0x05 0x030 1 45 N-- Highest Average Short Term Temperature
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
0x05 0x040 1 40 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 410 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 15 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 1508 --- Number of Hardware Resets
0x06 0x010 4 1034 --- Number of ASR Events
0x06 0x018 4 251 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment