Skip to content

Instantly share code, notes, and snippets.

@Logic-gate

Logic-gate/gps.conf

Last active February 2, 2023 07:38
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save Logic-gate/1d5344cf647a771ad550abe2feea4154 to your computer and use it in GitHub Desktop.
Save Logic-gate/1d5344cf647a771ad550abe2feea4154 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gps.conf
#USE AT YOUR OWN RISK
#MAKE A COPY OF YOUR OLD CONF BEFORE APPLYING THIS
# XTRA_SERVER_QUERY (1=on, 0=off)
# If XTRA_SERVER_QUERY is on, the XTRA_SERVERs listed
# below will be ignored, and instead the servers will
# be queried from the modem.
XTRA_SERVER_QUERY=1
# XTRA_SERVERs below are used only if XTRA_SERVER_QUERY
# is off. THESE ARE DISABLED
XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0
#NTP server
NTP_SERVER=time.google.com
NTP_SERVER_2=pool.ntp.org
NTP_SERVER_3=0.europe.pool.ntp.org
#XTRA CA path
#XTRA_CA_PATH=/usr/lib/ssl-1.1/certs
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
# If DEBUG_LEVEL is commented, Android's logging levels will be used
DEBUG_LEVEL = 3
# Intermediate position report, 1=enable, 0=disable
# YOU COULD TRY PLAYING WITH THIS
INTERMEDIATE_POS=0
# supl version 1.0
SUPL_VER=0x20000
# Emergency SUPL, 1=enable, 0=disable
SUPL_ES=1
#Choose PDN for Emergency SUPL
#1 - Use emergency PDN
#0 - Use regular SUPL PDN for Emergency SUPL
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
#If it is uncommented here, this value will overwrite the value from
#config.xml.
#MSA=0X2
#MSB=0X1
SUPL_MODE=3
# GPS Capabilities bit mask
# SCHEDULING = 0x01
# MSB = 0x02
# MSA = 0x04
# ON_DEMAND_TIME = 0x10
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING
CAPABILITIES=0x17
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
ACCURACY_THRES=70
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
# SUPL_HOST=supl.host.com or IP
# SUPL_PORT=1234
SUPL_HOST=supl.google.com
SUPL_PORT=7275
# FOR MO SUPL SUPPORT, set the following
# MO_SUPL_HOST=supl.host.com or IP
# MO_SUPL_PORT=1234
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
# Bitmask of slots that are available
# for write/install to, where 1s indicate writable,
# and the default value is 0 where no slots
# are writable. For example, AGPS_CERT_WRITABLE_MASK
# of b1000001010 makes 3 slots available
# and the remaining 7 slots unwritable.
#AGPS_CERT_WRITABLE_MASK=0
####################################
# LTE Positioning Profile Settings
####################################
# LPP_PROFILE is a bit mask
# 0: Enable RRLP on LTE(Default)
# 1: Enable LPP_User_Plane on LTE
# 2: Enable LPP_Control_Plane
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
LPP_PROFILE = 3
####################################
#Datum Type
####################################
# 0: WGS-84
# 1: PZ-90
DATUM_TYPE = 0
################################
# EXTRA SETTINGS
################################
# NMEA provider (1=Modem Processor, 0=Application Processor)
NMEA_PROVIDER=0
################################
# NMEA TAG BLOCK GROUPING
################################
# NMEA tag block grouping is only applicable to GSA
# Default is disabled
# 0 - disabled
# 1 - enabled
NMEA_TAG_BLOCK_GROUPING_ENABLED = 0
# Customized NMEA GGA fix quality that can be used to tell
# whether SENSOR contributed to the fix.
#
# When this configuration item is not enabled (set to any value that is not 1),
# GGA fix quality conforms to NMEA standard spec as below:
# PPP/DGNSS/SBAS correction fix w/ or w/o sensor: 2
# RTK fixed fix w/ or w/o sensor: 4
# RTK float fix w/ or w/o sensor: 5
# SPE fix w/ or w/o sensor: 1
# Sensor dead reckoning fix: 6
#
# When this configuration is enabled (set to 1), GGA fix quality
# will be output as below:
# PPP fix w/o sensor: 59, w/ sensor: 69
# DGNSS/SBAS correction fix w/o sensor: 2, w/ sensor: 62
# RTK fixed fix w/o sensor: 4, w/ sensor: 64
# RTK float fix w/o sensor: 5, w/ sensor: 65,
# SPE fix w/o sensor: 1, and w/ sensor: 61
# Sensor dead reckoning fix: 6
#
# any value that is not 1 - disabled
# 1 - enabled
CUSTOM_NMEA_GGA_FIX_QUALITY_ENABLED = 0
################################
# NMEA Reporting Rate Config, valid only when NMEA_PROVIDER is set to "0"
################################
# NMEA Reporting Rate
# Set it to "1HZ" for 1Hz NMEA Reporting
# Set it to "NHZ" for NHz NMEA Reporting
#Default : NHZ (overridden by position update rate if set to lower rates)
NMEA_REPORT_RATE=NHZ
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
SGLTE_TARGET=0
##################################################
# Select Positioning Protocol on A-GLONASS system
##################################################
# 0x1: RRC CPlane
# 0x2: RRLP UPlane
# 0x4: LLP Uplane
A_GLONASS_POS_PROTOCOL_SELECT = 0xf
##################################################
# Select technology for LPPe Control Plane
##################################################
# 0x1: DBH for LPPe CP
# 0x2: WLAN AP Measurements for LPPe CP
# 0x4: SRN AP measurement for CP
# 0x8: Sensor Barometer Measurement LPPe CP
LPPE_CP_TECHNOLOGY = 0x2
##################################################
# Select technology for LPPe User Plane
##################################################
# 0x1: DBH for LPPe UP
# 0x2: WLAN AP Measurements for LPPe UP
# 0x4: SRN AP measurement for UP
# 0x8: Sensor Barometer Measurement LPPe UP
LPPE_UP_TECHNOLOGY = 0x2
##################################################
# AGPS_CONFIG_INJECT
##################################################
# enable/disable injection of AGPS configurations:
# SUPL_VER
# SUPL_HOST
# SUPL_PORT
# MO_SUPL_HOST
# MO_SUPL_PORT
# C2K_HOST
# C2K_PORT
# LPP_PROFILE
# A_GLONASS_POS_PROTOCOL_SELECT
# 0: disable
# 1: enable
AGPS_CONFIG_INJECT = 1
##################################################
# GNSS settings for automotive use cases
# Configurations in following section are
# specific to automotive use cases, others
# please do not change, keep the default values
##################################################
# AP Coarse Timestamp Uncertainty
##################################################
# default : 10
# AP time stamp uncertainty, until GNSS receiver
# is able to acquire better timing information
AP_TIMESTAMP_UNCERTAINTY = 10
#####################################
# DR_SYNC Pulse Availability
#####################################
# 0 : DR_SYNC pulse not available (default)
# 1 : DR_SYNC pulse available
# This configuration enables the driver to make use
# of PPS events generated by DR_SYNC pulse
# Standard Linux PPS driver needs to be enabled
DR_SYNC_ENABLED = 0
#####################################
# PPS Device name
#####################################
PPS_DEVICENAME = /dev/pps0
#####################################
# Ignore PPS at Startup and after long outage
#####################################
IGNORE_PPS_PULSE_COUNT = 1
#####################################
# Long GNSS RF outage in seconds
#####################################
GNSS_OUTAGE_DURATION = 10
#####################################
# AP Clock Accuracy
#####################################
# Quality of APPS processor clock (in PPM).
# Value specified is used for calculation of
# APPS time stamp uncertainty
AP_CLOCK_PPM = 100
#####################################
# MAX ms difference to detect missing pulse
#####################################
# Specifies time threshold in ms to validate any missing PPS pulses
MISSING_PULSE_TIME_DELTA = 900
#####################################
# Propagation time uncertainty
#####################################
# This settings enables time uncertainty propagation
# logic incase of missing PPS pulse
PROPAGATION_TIME_UNCERTAINTY = 1
#######################################
# APN / IP Type Configuration
# APN and IP Type to use for setting
# up WWAN call.
# Use below values for IP Type:
# v4 = 4
# v6 = 6
# v4v6 = 10
#######################################
# INTERNET_APN = abc.xyz
# INTERNET_IP_TYPE = 4
# SUPL_APN = abc.xyz
# SUPL_IP_TYPE = 4
#####################################
# Modem type
#####################################
# This setting configures modem type
# (external=0 or internal=1)
# comment out the next line to vote
# for the first modem in the list
MODEM_TYPE = 1
##################################################
# CONSTRAINED TIME UNCERTAINTY MODE
##################################################
# 0 : disabled (default)
# 1 : enabled
# This setting enables GPS engine to keep its time
# uncertainty below the specified constraint
#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0
# If constrained time uncertainty mode is enabled,
# this setting specifies the time uncertainty
# threshold that gps engine need to maintain.
# In unit of milli-seconds.
# Default is 0.0 meaning that modem default value
# of time uncertainty threshold will be used.
#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0
# If constrained time uncertainty mode is enabled,
# this setting specifies the power budget that
# gps engine is allowed to spend to maintain the time
# uncertainty.
# Default is 0 meaning that GPS engine is not constained
# by power budget and can spend as much power as needed.
# In unit of 0.1 milli watt second.
#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0
##################################################
# POSITION ASSISTED CLOCK ESTIMATOR
##################################################
# 0 : disabled (default)
# 1 : enabled
# This setting enables GPS engine to estimate clock
# bias and drift when the signal from at least 1
# SV is available and the UE�s position is known by
# other position engines.
#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0
#####################################
# proxyAppPackageName
#####################################
# This is a string that is sent to the framework
# in nfwNotifyCb callback
#PROXY_APP_PACKAGE_NAME = com.lbe.security.miui
#####################################
# CP_MTLR_ES
#####################################
# CP MTLR ES, 1=enable, 0=disable
CP_MTLR_ES=0
##################################################
# GNSS_DEPLOYMENT
##################################################
# 0 : Enable QTI GNSS (default)
# 1 : Enable QCSR SS5
# 2 : Enable PDS API
# This setting use to select between QTI GNSS,
# QCSR SS5 hardware receiver, and PDS API.
# By default QTI GNSS receiver is enabled.
# GNSS_DEPLOYMENT = 0
##################################################
## LOG BUFFER CONFIGURATION
##################################################
#LOG_BUFFER_ENABLED, 1=enable, 0=disable
#*_LEVEL_TIME_DEPTH, maximum time depth of level *
#in log buffer, unit is second
#*_LEVEL_MAX_CAPACITY, maximum numbers of level *
#log print sentences in log buffer
LOG_BUFFER_ENABLED = 0
E_LEVEL_TIME_DEPTH = 600
E_LEVEL_MAX_CAPACITY = 50
W_LEVEL_TIME_DEPTH = 500
W_LEVEL_MAX_CAPACITY = 100
I_LEVEL_TIME_DEPTH = 400
I_LEVEL_MAX_CAPACITY = 200
D_LEVEL_TIME_DEPTH = 30
D_LEVEL_MAX_CAPACITY = 300
V_LEVEL_TIME_DEPTH = 200
V_LEVEL_MAX_CAPACITY = 400
# Xiaomi add for breaking xtra download limitation
XTRA_TEST_ENABLED = 1
XTRA_THROTTLE_ENABLED = 0
XTRA_SYSTEM_TIME_INJECT = 1
# Mechanism to handle the gnss assistance data download
# in very bad network situations
XTRA_SOCK_KEEPALIVE=1
##################################################
# Allow buffer diag log packets when diag memory allocation
# fails during boot up time.
##################################################
BUFFER_DIAG_LOGGING = 1
#######################################
# NTRIP CLIENT LIBRARY NAME
#######################################
# NTRIP_CLIENT_LIB_NAME =
##################################################
# Correction Data Framework settings
# Default values:
# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
# CDFW_INJECT_DATA_INTERVAL = 600000 //10 mins
# CDFW_RTCM_MESSAGE_INTERVAL = 1000 //1 second
#
# If multiple sources coexist on a PL,
# the prorioty sequence can be set by the integer number.
# PRIORITY_1 is higher than PRIORITY_2, for example,
# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
# CDFW_SOURCE_PRIORITY_2 = CV2X RTCM
##################################################
##################################################
# RF LOSS
# The loss in 0.1 dbHz from the C/N0 at the antenna port
# These values must be configured by OEM if not
# supported in QMI LOC message
# There is one entry for each signal type
##################################################
RF_LOSS_GPS = 0
RF_LOSS_GPS_L5 = 0
RF_LOSS_GLO_LEFT = 0
RF_LOSS_GLO_CENTER = 0
RF_LOSS_GLO_RIGHT = 0
RF_LOSS_BDS = 0
RF_LOSS_BDS_B2A = 0
RF_LOSS_GAL = 0
RF_LOSS_GAL_E5 = 0
RF_LOSS_NAVIC = 0
Raw
pro1_gps.conf
#USE AT YOUR OWN RISK
#MAKE A COPY OF YOUR OLD CONF BEFORE APPLYING THIS
# XTRA_SERVER_QUERY (1=on, 0=off)
# If XTRA_SERVER_QUERY is on, the XTRA_SERVERs listed
# below will be ignored, and instead the servers will
# be queried from the modem.
XTRA_SERVER_QUERY=0
# URLs from which to download XTRA data
# XTRA_SERVERs below are used only if XTRA_SERVER_QUERY
# is off.
XTRA_SERVER_1=https://xtrapath1.izatcloud.net/xtra3grc.bin
XTRA_SERVER_2=https://xtrapath2.izatcloud.net/xtra3grc.bin
XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra3grc.bin
#Version check for XTRA
#DISABLE = 0
#AUTO = 1
#XTRA2 = 2
#XTRA3 = 3
XTRA_VERSION_CHECK=1
# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0
#NTP server
NTP_SERVER=time.google.com
NTP_SERVER_2=pool.ntp.org
NTP_SERVER_3=0.europe.pool.ntp.org
#XTRA CA path
XTRA_CA_PATH=/system/etc/security/cacerts
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
# If DEBUG_LEVEL is commented, Android's logging levels will be used
DEBUG_LEVEL = 3
# Intermediate position report, 1=enable, 0=disable
# YOU COULD TRY PLAYING WITH THIS
INTERMEDIATE_POS=0
# supl version 1.0
SUPL_VER=0x20000
# Emergency SUPL, 1=enable, 0=disable
SUPL_ES=0
#Choose PDN for Emergency SUPL
#1 - Use emergency PDN
#0 - Use regular SUPL PDN for Emergency SUPL
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
#If it is uncommented here, this value will overwrite the value from
#config.xml.
#MSA=0X2
#MSB=0X1
SUPL_MODE=2
# GPS Capabilities bit mask
# SCHEDULING = 0x01
# MSB = 0x02
# MSA = 0x04
# ON_DEMAND_TIME = 0x10
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING
CAPABILITIES=0x17
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
ACCURACY_THRES=70
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
# SUPL_HOST=supl.host.com or IP
# SUPL_PORT=1234
SUPL_HOST=supl.google.com
SUPL_PORT=7275
# FOR MO SUPL SUPPORT, set the following
# MO_SUPL_HOST=supl.host.com or IP
# MO_SUPL_PORT=1234
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
# Bitmask of slots that are available
# for write/install to, where 1s indicate writable,
# and the default value is 0 where no slots
# are writable. For example, AGPS_CERT_WRITABLE_MASK
# of b1000001010 makes 3 slots available
# and the remaining 7 slots unwritable.
#AGPS_CERT_WRITABLE_MASK=0
####################################
# LTE Positioning Profile Settings
####################################
# LPP_PROFILE is a bit mask
# 0: Enable RRLP on LTE(Default)
# 1: Enable LPP_User_Plane on LTE
# 2: Enable LPP_Control_Plane
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
LPP_PROFILE = 3
####################################
#Datum Type
####################################
# 0: WGS-84
# 1: PZ-90
DATUM_TYPE = 1
################################
# EXTRA SETTINGS
################################
# NMEA provider (1=Modem Processor, 0=Application Processor)
NMEA_PROVIDER=0
################################
# NMEA TAG BLOCK GROUPING
################################
# NMEA tag block grouping is only applicable to GSA
# Default is disabled
# 0 - disabled
# 1 - enabled
NMEA_TAG_BLOCK_GROUPING_ENABLED = 0
# Customized NMEA GGA fix quality that can be used to tell
# whether SENSOR contributed to the fix.
#
# When this configuration item is not enabled (set to any value that is not 1),
# GGA fix quality conforms to NMEA standard spec as below:
# PPP/DGNSS/SBAS correction fix w/ or w/o sensor: 2
# RTK fixed fix w/ or w/o sensor: 4
# RTK float fix w/ or w/o sensor: 5
# SPE fix w/ or w/o sensor: 1
# Sensor dead reckoning fix: 6
#
# When this configuration is enabled (set to 1), GGA fix quality
# will be output as below:
# PPP fix w/o sensor: 59, w/ sensor: 69
# DGNSS/SBAS correction fix w/o sensor: 2, w/ sensor: 62
# RTK fixed fix w/o sensor: 4, w/ sensor: 64
# RTK float fix w/o sensor: 5, w/ sensor: 65,
# SPE fix w/o sensor: 1, and w/ sensor: 61
# Sensor dead reckoning fix: 6
#
# any value that is not 1 - disabled
# 1 - enabled
CUSTOM_NMEA_GGA_FIX_QUALITY_ENABLED = 0
################################
# NMEA Reporting Rate Config, valid only when NMEA_PROVIDER is set to "0"
################################
# NMEA Reporting Rate
# Set it to "1HZ" for 1Hz NMEA Reporting
# Set it to "NHZ" for NHz NMEA Reporting
#Default : NHZ (overridden by position update rate if set to lower rates)
NMEA_REPORT_RATE=NHZ
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
SGLTE_TARGET=0
##################################################
# Select Positioning Protocol on A-GLONASS system
##################################################
# 0x1: RRC CPlane
# 0x2: RRLP UPlane
# 0x4: LLP Uplane
A_GLONASS_POS_PROTOCOL_SELECT = 0xf
##################################################
# Select technology for LPPe Control Plane
##################################################
# 0x1: DBH for LPPe CP
# 0x2: WLAN AP Measurements for LPPe CP
# 0x4: SRN AP measurement for CP
# 0x8: Sensor Barometer Measurement LPPe CP
LPPE_CP_TECHNOLOGY = 0x2
##################################################
# Select technology for LPPe User Plane
##################################################
# 0x1: DBH for LPPe UP
# 0x2: WLAN AP Measurements for LPPe UP
# 0x4: SRN AP measurement for UP
# 0x8: Sensor Barometer Measurement LPPe UP
LPPE_UP_TECHNOLOGY = 0x2
##################################################
# AGPS_CONFIG_INJECT
##################################################
# enable/disable injection of AGPS configurations:
# SUPL_VER
# SUPL_HOST
# SUPL_PORT
# MO_SUPL_HOST
# MO_SUPL_PORT
# C2K_HOST
# C2K_PORT
# LPP_PROFILE
# A_GLONASS_POS_PROTOCOL_SELECT
# 0: disable
# 1: enable
AGPS_CONFIG_INJECT = 1
##################################################
# GNSS settings for automotive use cases
# Configurations in following section are
# specific to automotive use cases, others
# please do not change, keep the default values
##################################################
# AP Coarse Timestamp Uncertainty
##################################################
# default : 10
# AP time stamp uncertainty, until GNSS receiver
# is able to acquire better timing information
AP_TIMESTAMP_UNCERTAINTY = 10
#####################################
# DR_SYNC Pulse Availability
#####################################
# 0 : DR_SYNC pulse not available (default)
# 1 : DR_SYNC pulse available
# This configuration enables the driver to make use
# of PPS events generated by DR_SYNC pulse
# Standard Linux PPS driver needs to be enabled
DR_SYNC_ENABLED = 0
#####################################
# PPS Device name
#####################################
PPS_DEVICENAME = /dev/pps0
#####################################
# Ignore PPS at Startup and after long outage
#####################################
IGNORE_PPS_PULSE_COUNT = 1
#####################################
# Long GNSS RF outage in seconds
#####################################
GNSS_OUTAGE_DURATION = 10
#####################################
# AP Clock Accuracy
#####################################
# Quality of APPS processor clock (in PPM).
# Value specified is used for calculation of
# APPS time stamp uncertainty
AP_CLOCK_PPM = 100
#####################################
# MAX ms difference to detect missing pulse
#####################################
# Specifies time threshold in ms to validate any missing PPS pulses
MISSING_PULSE_TIME_DELTA = 900
#####################################
# Propagation time uncertainty
#####################################
# This settings enables time uncertainty propagation
# logic incase of missing PPS pulse
PROPAGATION_TIME_UNCERTAINTY = 1
#######################################
# APN / IP Type Configuration
# APN and IP Type to use for setting
# up WWAN call.
# Use below values for IP Type:
# v4 = 4
# v6 = 6
# v4v6 = 10
#######################################
# INTERNET_APN = abc.xyz
# INTERNET_IP_TYPE = 4
# SUPL_APN = abc.xyz
# SUPL_IP_TYPE = 4
#####################################
# Modem type
#####################################
# This setting configures modem type
# (external=0 or internal=1)
# comment out the next line to vote
# for the first modem in the list
MODEM_TYPE = 1
##################################################
# CONSTRAINED TIME UNCERTAINTY MODE
##################################################
# 0 : disabled (default)
# 1 : enabled
# This setting enables GPS engine to keep its time
# uncertainty below the specified constraint
#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0
# If constrained time uncertainty mode is enabled,
# this setting specifies the time uncertainty
# threshold that gps engine need to maintain.
# In unit of milli-seconds.
# Default is 0.0 meaning that modem default value
# of time uncertainty threshold will be used.
#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0
# If constrained time uncertainty mode is enabled,
# this setting specifies the power budget that
# gps engine is allowed to spend to maintain the time
# uncertainty.
# Default is 0 meaning that GPS engine is not constained
# by power budget and can spend as much power as needed.
# In unit of 0.1 milli watt second.
#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0
##################################################
# POSITION ASSISTED CLOCK ESTIMATOR
##################################################
# 0 : disabled (default)
# 1 : enabled
# This setting enables GPS engine to estimate clock
# bias and drift when the signal from at least 1
# SV is available and the UE�s position is known by
# other position engines.
#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0
#####################################
# proxyAppPackageName
#####################################
# This is a string that is sent to the framework
# in nfwNotifyCb callback
#PROXY_APP_PACKAGE_NAME = com.lbe.security.miui
#####################################
# CP_MTLR_ES
#####################################
# CP MTLR ES, 1=enable, 0=disable
CP_MTLR_ES=0
##################################################
# GNSS_DEPLOYMENT
##################################################
# 0 : Enable QTI GNSS (default)
# 1 : Enable QCSR SS5
# 2 : Enable PDS API
# This setting use to select between QTI GNSS,
# QCSR SS5 hardware receiver, and PDS API.
# By default QTI GNSS receiver is enabled.
# GNSS_DEPLOYMENT = 0
##################################################
## LOG BUFFER CONFIGURATION
##################################################
#LOG_BUFFER_ENABLED, 1=enable, 0=disable
#*_LEVEL_TIME_DEPTH, maximum time depth of level *
#in log buffer, unit is second
#*_LEVEL_MAX_CAPACITY, maximum numbers of level *
#log print sentences in log buffer
LOG_BUFFER_ENABLED = 0
E_LEVEL_TIME_DEPTH = 600
E_LEVEL_MAX_CAPACITY = 50
W_LEVEL_TIME_DEPTH = 500
W_LEVEL_MAX_CAPACITY = 100
I_LEVEL_TIME_DEPTH = 400
I_LEVEL_MAX_CAPACITY = 200
D_LEVEL_TIME_DEPTH = 30
D_LEVEL_MAX_CAPACITY = 300
V_LEVEL_TIME_DEPTH = 200
V_LEVEL_MAX_CAPACITY = 400
# Xiaomi add for breaking xtra download limitation
XTRA_TEST_ENABLED = 1
XTRA_THROTTLE_ENABLED = 0
XTRA_SYSTEM_TIME_INJECT = 1
# Mechanism to handle the gnss assistance data download
# in very bad network situations
XTRA_SOCK_KEEPALIVE=1
##################################################
# Allow buffer diag log packets when diag memory allocation
# fails during boot up time.
##################################################
BUFFER_DIAG_LOGGING = 1
#######################################
# NTRIP CLIENT LIBRARY NAME
#######################################
# NTRIP_CLIENT_LIB_NAME =
##################################################
# Correction Data Framework settings
# Default values:
# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
# CDFW_INJECT_DATA_INTERVAL = 600000 //10 mins
# CDFW_RTCM_MESSAGE_INTERVAL = 1000 //1 second
#
# If multiple sources coexist on a PL,
# the prorioty sequence can be set by the integer number.
# PRIORITY_1 is higher than PRIORITY_2, for example,
# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
# CDFW_SOURCE_PRIORITY_2 = CV2X RTCM
##################################################
##################################################
# RF LOSS
# The loss in 0.1 dbHz from the C/N0 at the antenna port
# These values must be configured by OEM if not
# supported in QMI LOC message
# There is one entry for each signal type
##################################################
RF_LOSS_GPS = 0
RF_LOSS_GPS_L5 = 0
RF_LOSS_GLO_LEFT = 0
RF_LOSS_GLO_CENTER = 0
RF_LOSS_GLO_RIGHT = 0
RF_LOSS_BDS = 0
RF_LOSS_BDS_B2A = 0
RF_LOSS_GAL = 0
RF_LOSS_GAL_E5 = 0
RF_LOSS_NAVIC = 0
Raw
pro1_gps_v2.conf
# PRO1 gps.conf
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
# If DEBUG_LEVEL is commented, Android's logging levels will be used
DEBUG_LEVEL = 5
#Version check for XTRA
#DISABLE = 0
#AUTO = 1
#XTRA2 = 2
#XTRA3 = 3
XTRA_VERSION_CHECK=1
# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0
#NTP server
NTP_SERVER=time.izatcloud.net
NTP_SERVER_2=time.google.com
NTP_SERVER_3=pool.ntp
#XTRA CA path
XTRA_CA_PATH=/system/etc/security/cacerts
# supl version 2.0
SUPL_VER=0x20000
# Emergency SUPL, 1=enable, 0=disable
SUPL_ES=1
# GPS Capabilities bit mask
# SCHEDULING = 0x01
# MSB = 0x02
# MSA = 0x04
# ON_DEMAND_TIME = 0x10
# GEOFENCE = 0x20
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
CAPABILITIES=0x37
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
#If it is uncommented here, this value will overwrite the value from
#config.xml.
#MSA=0X2
#MSB=0X1
SUPL_MODE=2
# FOR SUPL SUPPORT, set the following
# SUPL_HOST=supl.host.com or IP
# SUPL_PORT=1234
SUPL_HOST=supl.google.com
SUPL_PORT=7276
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=1
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
ACCURACY_THRES=20
####################################
# LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default)
# 1: Enable LPP_User_Plane on LTE
# 2: Enable LPP_Control_Plane
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
LPP_PROFILE = 2
####################################
#Datum Type
####################################
# 0: WGS-84
# 1: PZ-90
DATUM_TYPE = 1
# Customized NMEA GGA fix quality that can be used to tell
# whether SENSOR contributed to the fix.
#
# When this configuration item is not enabled (set to any value that is not 1),
# GGA fix quality conforms to NMEA standard spec as below:
# PPP/DGNSS/SBAS correction fix w/ or w/o sensor: 2
# RTK fixed fix w/ or w/o sensor: 4
# RTK float fix w/ or w/o sensor: 5
# SPE fix w/ or w/o sensor: 1
# Sensor dead reckoning fix: 6
#
# When this configuration is enabled (set to 1), GGA fix quality
# will be output as below:
# PPP fix w/o sensor: 59, w/ sensor: 69
# DGNSS/SBAS correction fix w/o sensor: 2, w/ sensor: 62
# RTK fixed fix w/o sensor: 4, w/ sensor: 64
# RTK float fix w/o sensor: 5, w/ sensor: 65,
# SPE fix w/o sensor: 1, and w/ sensor: 61
# Sensor dead reckoning fix: 6
#
# any value that is not 1 - disabled
# 1 - enabled
CUSTOM_NMEA_GGA_FIX_QUALITY_ENABLED = 1
################################
# NMEA Reporting Rate Config, valid only when NMEA_PROVIDER is set to "0"
################################
# NMEA Reporting Rate
# Set it to "1HZ" for 1Hz NMEA Reporting
# Set it to "NHZ" for NHz NMEA Reporting
#Default : NHZ (overridden by position update rate if set to lower rates)
NMEA_REPORT_RATE=NHZ
################################
# EXTRA SETTINGS
################################
# NMEA provider (1=Modem Processor, 0=Application Processor)
NMEA_PROVIDER=1
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
SGLTE_TARGET=1
##################################################
# Select Positioning Protocol on A-GLONASS system
##################################################
# 0x1: RRC CPlane
# 0x2: RRLP UPlane
# 0x4: LLP Uplane
A_GLONASS_POS_PROTOCOL_SELECT = 0x7
##################################################
# Select technology for LPPe Control Plane
##################################################
# 0x1: DBH for LPPe CP
# 0x2: WLAN AP Measurements for LPPe CP
# 0x4: SRN AP measurement for CP
# 0x8: Sensor Barometer Measurement LPPe CP
LPPE_CP_TECHNOLOGY = 0x15
##################################################
# Select technology for LPPe User Plane
##################################################
# 0x1: DBH for LPPe UP
# 0x2: WLAN AP Measurements for LPPe UP
# 0x4: SRN AP measurement for UP
# 0x8: Sensor Barometer Measurement LPPe UP
LPPE_UP_TECHNOLOGY = 0x15
##################################################
# AGPS_CONFIG_INJECT
##################################################
# enable/disable injection of AGPS configurations:
# SUPL_VER
# SUPL_HOST
# SUPL_PORT
# C2K_HOST
# C2K_PORT
# LPP_PROFILE
# A_GLONASS_POS_PROTOCOL_SELECT
# 0: disable
# 1: enable
AGPS_CONFIG_INJECT = 1
##################################################
# GNSS settings for automotive use cases
# Configurations in following section are
# specific to automotive use cases, others
# please do not change, keep the default values
##################################################
# AP Coarse Timestamp Uncertainty
##################################################
# default : 10
# AP time stamp uncertainty, until GNSS receiver
# is able to acquire better timing information
AP_TIMESTAMP_UNCERTAINTY = 10
##################################################
# QDR engine availability status
##################################################
# 0 : NO QDR (default)
# 1 : QDR enabled
# This settings enables QDR Configuration for
# automotive use case, if enabled then
# DR_AP_Service needs to be enabled in izat.conf
#EXTERNAL_DR_ENABLED = 0
#####################################
# PPS Device name
#####################################
PPS_DEVICENAME = /dev/pps0
#####################################
# AP Clock Accuracy
#####################################
# Quality of APPS processor clock (in PPM).
# Value specified is used for calculation of
# APPS time stamp uncertainty
AP_CLOCK_PPM = 100
#####################################
# MAX ms difference to detect missing pulse
#####################################
# Specifies time threshold in ms to validate any missing PPS pulses
MISSING_PULSE_TIME_DELTA = 900
#####################################
# Propagation time uncertainty
#####################################
# This settings enables time uncertainty propagation
# logic incase of missing PPS pulse
PROPAGATION_TIME_UNCERTAINTY = 1
#######################################
# APN / IP Type Configuration
# APN and IP Type to use for setting
# up WWAN call.
# Use below values for IP Type:
# v4 = 4
# v6 = 6
# v4v6 = 10
#######################################
# INTERNET_APN = abc.xyz
# INTERNET_IP_TYPE = 4
# SUPL_APN = abc.xyz
# SUPL_IP_TYPE = 4
#####################################
# CP_MTLR_ES
#####################################
# CP MTLR ES, 1=enable, 0=disable
CP_MTLR_ES=1
# Xiaomi add for breaking xtra download limitation
XTRA_TEST_ENABLED = 1
XTRA_THROTTLE_ENABLED = 0
XTRA_SYSTEM_TIME_INJECT = 1
# Mechanism to handle the gnss assistance data download
# in very bad network situations
XTRA_SOCK_KEEPALIVE=1
##################################################
# Allow buffer diag log packets when diag memory allocation
# fails during boot up time.
##################################################
BUFFER_DIAG_LOGGING = 1
##################################################
# RF LOSS
# The loss in 0.1 dbHz from the C/N0 at the antenna port
# These values must be configured by OEM if not
# supported in QMI LOC message
# There is one entry for each signal type
##################################################
RF_LOSS_GPS = 1
RF_LOSS_GPS_L5 = 0
RF_LOSS_GLO_LEFT = 0
RF_LOSS_GLO_CENTER = 0
RF_LOSS_GLO_RIGHT = 0
RF_LOSS_BDS = 0
RF_LOSS_BDS_B2A = 0
RF_LOSS_GAL = 0
RF_LOSS_GAL_E5 = 0
RF_LOSS_NAVIC = 0
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment