Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
IBM 9131-52A FSP (80P5315) firmware version SF240_403
---- FSPBOOT 0.8.31 build on Linux 2.6.5-7.252-bigsmp at Aug 11 2006 15:11:16 ----
Core CRC ok
Flash/NVRAM configuration
start maxsize manufid deviceid type
0. fc000000 00800000 00000000 00000000 NVRAM
1. fc800000 00800000 00000000 00000000 NVRAM
2. fd000000 01000000 00002000 00001888 FLASH_REAL
3. fe000000 01000000 00002000 00001888 FLASH_REAL
4. ff000000 01000000 00002000 00001888 FLASH_REAL
Initialize plugin
FipS Boot Plugin (Aug 25 2010 16:58:43)
magic: 0x6861636b cap0: 0x0002 cap1: 0x0002
cap2: 0x0002 cap3: 0x0002 resrvd0: 0x00000000
resrvd1: 0x00000000 resrvd2: 0x00000000 resrvd3: 0x0000
used: 0x0002 checksum: 0x002fc419
NVRAM footer magic numer ok
Previously used crc algo is supported.
NVRAM checksum seems ok.
magic: 0x6861636b cap0: 0x0002 cap1: 0x0002
cap2: 0x0002 cap3: 0x0002 resrvd0: 0x00000000
resrvd1: 0x00000000 resrvd2: 0x00000000 resrvd3: 0x0000
used: 0x0002 checksum: 0x002fc419
Checking Partition Table...
Partition Table Ok. Flag = 0x0000087b
PLUGIN checkpoint_reached(0x02000700) data=0x00000000 size=0 [OK]
PVR ...: 51311413 CRCS .......: c0018000 DRCR ....: 00000000
DISR ..: 00000000 PREV CHKP ..: 02010001 CURR CHKP: 02000700
reset_count: 0 reset_failsafe: -2 reset_max: 3
Chip ECID .: 00000000:000029b2:5d4c647f:0f15e152
Time ......: 21/11/17 14:14:37 Reset Orig: 3 Type: 2 Reason: 7
Flashbank .: default Exit self refresh sequence has been run
PLUGIN checkpoint_reached(0x01000401) data=0x00000000 size=0 [OK]
Memory Test: [00000000-03220000] 3634 msec
PLUGIN checkpoint_reached(0x01000400) data=0x032578d8 size=4104 [OK]
ok
PLUGIN checkpoint_reached(0x01000801) data=0x00000000 size=0 [OK]
PLUGIN: Plugin param save executed
return value: 87Save bparam in PCS
PLUGIN checkpoint_reached(0x01000800) data=0x00000000 size=0 [OK]
ok
PLUGIN checkpoint_reached(0x02000f00) data=0x00000000 size=0 [OK]
PLUGIN checkpoint_reached(0x02000901) data=0x00000000 size=0 [OK]
Checking NVRAM magic number: Okay
Origin: 3
Reason: 7
Type: 2
kernel_address="0xffee0000"
booting from the top module...
command="load 0xffee0000; start"
buf_def="mphysmap=top_side,0xff000000,0x01000000,2"
buf_alt="mphysmap=bottom_side,0xfe000000,0x01000000,2"
top_bank="mphysmap=top_side,0xff000000,0x01000000,2"
bot_bank="mphysmap=bottom_side,0xfe000000,0x01000000,2"
reset_max="3"
phyp_nvram_size="0x000bc000"
PLUGIN checkpoint_reached(0x02000900) data=0x00000000 size=0 [OK]
FSPBOOT 0.8.31 build on Linux 2.6.5-7.252-bigsmp at Aug 11 2006 15:11:16
PLUGIN checkpoint_reached(0x02000b01) data=0x00000000 size=0 [OK]
Inflating kernel image from 0xffee0040 to 0x00000000
PLUGIN checkpoint_reached(0x02000b00) data=0x00000000 size=0 [OK]
728 msec 1681540 bytes
return value: 0
SEC PCI Reset (elapsed 5933 msec) done
PLUGIN checkpoint_reached(0x02010001) data=0x00000000 size=0 [OK]
return value: 356Booting took 6945 msec
Linux version 2.4.18-rc4 (root@mcpbuild6) (gcc version 3.2.3 20030401 (prerelease)) #1 Wed Mar 25 15:01:22 UTC 2009
crash_init (bootmap_va=c01d1000,crash_va=c0200000,end_alloc_va=c0243000)
__zlib_set_workspace: set zlib_workspace to c0201000
crash_dump_header c0200000 {
magic[0] = ffffffff
map = ffffffff
map_pages = ffffffff
data_pages = ffffffff
compr_units = ffffffff
boot_reserved_start = ffffffff
boot_reserved_end = ffffffff
}
WPA: Kernel is configured to PROTECT all pages of memory.
This state may change as device drivers instantiate.
PCI: pci_dram_offset = 0x00000000
FSP base chip UARTS: Initializing 1-4
Processor Version Register: 51311413 : FSP PASS 2.1 HARDWARE
On node 0 totalpages: 11264
zone(0): 11264 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock3 rw mem=0x02c00000 console=ttyS0,115200 slram=pcsram,0x02c80000,+0x00240000,tmpram,0x03100000,+0x001f0000,phypnvram,0xfc044000,+0x000bc000,pcsbparam,0x02c00000,+0x00080000,pcscore,0x02ec0000,+0x00240000 mtdcram=nvram,0xfc000000,0x00044000 mtdcram_side=1 mphysmap=top_side,0xff000000,0x01000000,2 mphysmap=bottom_side,0xfe000000,0x01000000,2 mphysmap=ext_side,0xfd000000,0x01000000,2 partt=1,1,0x0c
Init FSP IRQ priorization PVR=0x00005131 # of IRQs=128
Enabled interrupt controller FSPb dual UIC+prioIRQ
RTC Init: Present date/time: 2021/11/17 14:14:42
Regs A-D, wrapper_cntl: 20 6 10 80 7
Calibrating delay loop... 199.47 BogoMIPS
Memory: 42252k available (1288k kernel code, 492k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI PDD INIT: pci_dram_offset = 0xf4000000
PCI: Probing PCI hardware
Memory resource not set for host bridge 0
Memory resource not set for host bridge 1
Memory resource not set for host bridge 2
Memory resource not set for host bridge 3
PCI: moved device 00:02.0 resource 0 (200) to f0000000
PCI: moved device 00:02.0 resource 2 (1208) to f0100000
PCI: moved device 00:02.0 resource 4 (1208) to f0200000
PCI: Enabling device 00:02.0 (0000 -> 0002)
PCI: Starting extender chip BAT...
PCI: Finished extender BAT
Waiting 2 seconds for post reset BIST.
PCI: Enabling device 00:02.0 (0000 -> 0002)
FSPE Error Interrupts Registered, now enabling: 00090000
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IBM FSP Pin Configurator, $Revision: 1.7 $
adj b-gpio c310d000 <= 00050000 & 00050000 [00050000]
adj b-gpio c310d004 <= a2802800 & ffffffff [a2802800]
adj b-gpio c310d008 <= 88088000 & ffffffff [88088000]
adj b-gpio c310d00c <= 00000000 & ffffffff [00000000]
adj b-gpio c310d014 <= 00000000 & 0000cfff [00000000]
adj b-gpio c310d018 <= 00050000 & 000500ff [00050000]
adj b-gpio c310d034 <= 00000000 & 0000cfff [00000000]
adj b-gpio c310d038 <= 11511500 & 33f33f00 [11511500]
adj b-gpio c310d03c <= 00004445 & 0000cfff [00004445]
FSP PICO: FSPe Chip Config Logic (CIPM) Adjustment
FSP PICO: CIPM: chip revision is 2
FSP PICO: CIPM: found FSPe Rev.2
FSP PICO: CIPM: starts at phys=0x40000800
FSP PICO: CIPM: starts at virt=0xc310d800
pra Mar 25 2009 15:01:41
Starting kswapd
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xc311a000x (irq = 0) is a 16550A
ttyS01 at 0xc311c000x (irq = 1) is a 16550A
ttyS02 at 0xc311e000x (irq = 2) is a 16550A
ttyS03 at 0xc3120000x (irq = 3) is a 16550A
IBM FSP Real Time Clock Driver v0.7
IBM FSPb 'Unit Check Timer' (Watchdog) driver 1.2 using IRQ 55 and crit IRQ 54
Using timeout of 0x00600000 (~62 seconds)
IBM ppc4xx RESET Driver 0.9.3 (debug=0) Mar 25 2009 15:01:45
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
PPP BSD Compression module registered
mphysmap flash device "top_side": 0x01000000 at 0xff000000
Chip manufacturer is ST_MICRO.
partt: in get_table_addr : addr=0x00fffff4 size=0x01000000 table=0x00fd7040
partt: in parse_partt_partitions : flash_table: 0x00fd7040
Creating 4 MTD partitions on "top_side":
0x00000000-0x00980000 : "EXTUCODE1"
0x00980000-0x00a80000 : "DUMP1"
0x00a80000-0x00ee0000 : "ROOTFS1"
0x00ee0000-0x01000000 : "BOOT1"
mphysmap flash device "bottom_side": 0x01000000 at 0xfe000000
Chip manufacturer is ST_MICRO.
partt: in get_table_addr : addr=0x00fffff4 size=0x01000000 table=0x00fd7040
partt: in parse_partt_partitions : flash_table: 0x00fd7040
Creating 4 MTD partitions on "bottom_side":
0x00000000-0x00980000 : "EXTUCODE0"
0x00980000-0x00a80000 : "DUMP0"
0x00a80000-0x00ee0000 : "ROOTFS0"
0x00ee0000-0x01000000 : "BOOT0"
mphysmap flash device "ext_side": 0x01000000 at 0xfd000000
Chip manufacturer is ST_MICRO.
partt: in get_table_addr : addr=0x00fffff4 size=0x01000000 table=0x00fe0040
partt: in parse_partt_partitions : flash_table: 0x00fe0040
Creating 5 MTD partitions on "ext_side":
0x00000000-0x00400000 : "FIPSA"
0x00400000-0x00800000 : "DUMPA"
0x00800000-0x00c00000 : "FIPSB"
0x00c00000-0x00fe0000 : "DUMPB"
0x00fe0000-0x01000000 : "BOOTEXT"
mphysmap: enabling boot watchdog
cram: warning 00044000 is not a power of two!
cram: Allocating 00080000 bytes for device
rtc: unable to get misc minor
LTT - Initialized and Tracing
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
ip_conntrack (352 buckets, 2816 max)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
zlib_init: workspace 0 already set
VFS: Mounted root (cramfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init done
fspinit v2.2 $Revision: 1.33.2.15.2.13 $ starting Initialization
fspinit v2.2 $Revision: 1.33.2.15.2.13 $ initialization complete
+ ulimit -c unlimited
+ export PATH=/nfs/test:/opt/extucode/bin:/nfs/bin:/nfs/sbin:/bin:/usr/bin:/opt/fips/bin
+ export FIPS_TRACE_PATH=/tmp/
+ export FSP_MENU_HTML_LOCATION=/opt/fips/components/menu
+ export LD_LIBRARY_PATH=/nfs/test:/nfs/lib:/opt/fips/lib:/lib
+ export FSPINIT_TRANSBASE=/nfs/test/etc/fspinit:/nfs/etc/fspinit:/etc/fspinit
+ tftim s 600
TF timer sec: 600
+ /bin/softdog
+ mount -n -t jffs2 /dev/mtdblock/0/1 /opt/extucode
+ ETC_DIR=/opt/extucode/p3
+ cat /etc/DriverName
+ RDNAME=fips240/b0825a_1012.240
+ cat /opt/extucode/p3/etc/DriverName
+ EDNAME=fips240/b0825a_1012.240
+ [ fips240/b0825a_1012.240 != fips240/b0825a_1012.240 ]
+ mount -n --bind /opt/extucode/p3/etc /etc
+ /etc/fspinit/initial_full
+ ulimit -c unlimited
+ export PATH=/nfs/test:/opt/extucode/bin:/nfs/bin:/nfs/sbin:/bin:/usr/bin:/opt/fips/bin
+ export FIPS_TRACE_PATH=/tmp/
+ export FSP_MENU_HTML_LOCATION=/opt/fips/components/menu
+ export LD_LIBRARY_PATH=/nfs/test:/nfs/lib:/opt/fips/lib:/lib
+ export FSPINIT_TRANSBASE=/nfs/test/etc/fspinit:/nfs/etc/fspinit:/etc/fspinit
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/fsp/fsp_trace_dd.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/fsp/fsp_trace_dd.o
IBM FSP-TRACE FLD v2.0 build Jul 7 2005
+ /sbin/tiny_syslogd -s 32768
+ PATH=/bin:/sbin:/usr/bin:/usr/sbin
+ export PATH
+ echo Mounting proc filesystems.
Mounting proc filesystems.
+ mount -n -t proc proc /proc
+ echo 1
+ /bin/ff
+ [ 0 -ne 0 ]
+ mount -t jffs2 /dev/mtdblock/tmpram/tmpram /tmp
+ [ 0 -ne 0 ]
+ mount -n -t tmpfs none /var -o size=1024K
+ [ 0 -ne 0 ]
+ mkdir /var/log
+ [ 0 -ne 0 ]
+ mkdir /var/shm
+ [ 0 -ne 0 ]
+ mkdir /var/run
+ [ 0 -ne 0 ]
+ uname -r
+ mkdir -p /var/lib/modules/2.4.18-rc4
+ [ 0 -ne 0 ]
+ [ -x /etc/rc.d/start_sshd ]
+ mount -t jffs2 /dev/mtdblock/pcscore/pcscore /core
+ [ 0 -ne 0 ]
+ grep Type.*Core /proc/reset/current
+ RC=1
+ grep Reason.*PowerOff /proc/reset/current
+ RC2=1
+ [ 1 = 0 ]
+ [ 1 = 0 ]
+ echo P1 is re-inited on non-core resets
P1 is re-inited on non-core resets
+ /bin/ff
+ mount -t jffs2 /dev/mtdblock/pcsram/pcsram /opt/p1
+ [ 0 -ne 0 ]
+ mount -n -t shm shm /var/shm
+ [ 0 -ne 0 ]
+ grep Alternate /proc/reset/bootwatchdog
+ RC=1
+ [ 1 = 0 ]
+ echo Normal boot bank in use...
Normal boot bank in use...
+ BOOTSIDE=def
+ registry -r bparm_pcs/command
+ SIDEADDR=load 0xffee0000; start
+ [ 0 -ne 0 ]
+ echo load 0xffee0000; start
+ grep -i 0xff
+ RC=0
+ [ 0 = 0 ]
+ RUNSIDE=def
+ OPT_BOOT=/dev/mtdblock/0/4
+ ALT_BOOT=/dev/mtdblock/1/4
+ OPT_ROOT=/dev/mtdblock/0/3
+ ALT_ROOT=/dev/mtdblock/1/3
+ OPT_EXTU=/dev/mtdblock/0/1
+ ALT_EXTU=/dev/mtdblock/1/1
+ [ ( ( def = def ) -a ( def = def ) ) -o ( ( def = alt ) -a ( def = alt ) ) ]
+ OPTONTOP=1
+ OPT_FIPS=/dev/mtdblock/2/3
+ ALT_FIPS=/dev/mtdblock/2/1
+ mount -t jffs2 /dev/mtdblock/1/1 /alt/extucode
+ [ 0 -ne 0 ]
+ mount -t cramfs /dev/mtdblock/2/3 /opt/fips
+ [ 0 -ne 0 ]
+ ifconfig lo up 127.0.0.1
+ [ 0 -ne 0 ]
+ route add -net 127.0.0.0 netmask 255.0.0.0 dev lo
+ [ 0 -ne 0 ]
+ registry -r pdd/NVRAM_Map
+ MN=1
+ [ 1x = x ]
+ nvram_init /dev/mtdblock/nvram/nvram /opt/fips/components/fstp/zofs.map1.data
nvram_init: nvram device size is 278528
nvram_init: magic number is good
found end tag at 231226
nvram_init: new zofs image size is 231226
nvram_init: nvram is okay
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/fs/zofs/zofs.o
Using /lib/modules/2.4.18-rc4/kernel/fs/zofs/zofs.o
+ [ 0 -ne 0 ]
+ mount -t zofs -o sync -o header=/opt/fips/components/fstp/zofs.map1.mdata /dev/mtdblock/nvram/nvram /opt/p2
+ [ 0 -ne 0 ]
+ cat /opt/fips/components/fstp/DriverName
+ sed s/.*\///
+ OPTDRNM=b0825a_1012.240
+ mount -t cramfs /dev/mtdblock/2/1 /alt/fips
+ [ 0 -ne 0 ]
+ cat /alt/fips/components/fstp/DriverName
+ sed s/.*\///
+ ALTDRNM=b0825a_1012.240
+ umount /alt/fips
+ [ 1 = 0 ]
+ [ -s /opt/p2/bdmp/DriverNameOpt ]
+ cat /opt/p2/bdmp/DriverNameOpt
+ NVRAMOPTDRNM=b0825a_1012.240
+ [ b0825a_1012.240x != b0825a_1012.240x ]
+ [ -s /opt/p2/bdmp/DriverNameAlt ]
+ cat /opt/p2/bdmp/DriverNameAlt
+ NVRAMALTDRNM=b0825a_1012.240
+ [ b0825a_1012.240x != b0825a_1012.240x ]
+ registry -w fstp/OptBootPartDev /dev/mtdblock/0/4
+ registry -w fstp/AltBootPartDev /dev/mtdblock/1/4
+ registry -w fstp/OptRootfsDev /dev/mtdblock/0/3
+ registry -w fstp/AltRootfsDev /dev/mtdblock/1/3
+ registry -w fstp/OptExtufsDev /dev/mtdblock/0/1
+ registry -w fstp/AltExtufsDev /dev/mtdblock/1/1
+ registry -w fstp/OptFipsfsDev /dev/mtdblock/2/3
+ registry -w fstp/AltFipsfsDev /dev/mtdblock/2/1
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/net/fsp_mdio.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/net/fsp_mdio.o
Warning: loading fsp_mdio will taint the kernel: no license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/net/fsp_enet.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/net/fsp_enet.o
IBM FSP Ethernet Device Driver (littleb), Version 0.74-tcp
MadMAL HostPLB relocation enabled to: 0xf4000000
IBM FSP Ethernet Device Driver (littleb), Version 0.74-tcp
+ [ 0 -ne 0 ]
+ /etc/sysconfig/network-scripts/ifup eth0
IBM FSP MDIO Driver, Version 0.8-freefree
eth0: Automatic MDIX configuration enabled
eth0: link changed to 100baseTX / FDX
ifup: Configuring eth0 interface
ifup: Checking the link
ifup: link is up. keep configuring
cat: /tmp/DHCPserver-detect: No such file or directory
kill: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or
kill -l [exitstatus]
cat: /tmp/network-monitor: No such file or directory
kill: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or
kill -l [exitstatus]
ifup: Attempting to configure ethernet adapter by contacting a DHCP server...
Wed Nov 17 14:15:14 UTC 2021
T1 set to 900 secs
T2 set to 2580 secs
dhcpcd: MAC address = 00:11:25:01:d9:e7
dhcpcd: your IP address = 10.12.4.125
ifup: DHCP worked so save the addresses back to the NVRAM
Wed Nov 17 14:15:14 UTC 2021
Invalid hostname for eth0 so using defaults
Invalid hostname for eth1 so not doing anything
ifup: launch network-monitor
ifup: launch DHCPserver-detect
ifup: Done with configuring the adapter. Now run the fire wall script
Reject all rule
Allow various netc/nets ports and http, https
Warning: you must enable IP forwarding for packets to be forwarded at all:
Use `echo 1 > /proc/sys/net/ipv4/ip_forward'
Warning: you must enable IP forwarding for packets to be forwarded at all:
Use `echo 1 > /proc/sys/net/ipv4/ip_forward'
ifup: Config Completed
+ [ 0 -ne 0 ]
+ /etc/sysconfig/network-scripts/ifup eth1
eth1: Automatic MDIX configuration enabled
eth1: no link
ifup: Configuring eth1 interface
ifup: Checking the link
ifup: link is down!!! so quit
Invalid hostname for eth0 so using defaults
Invalid hostname for eth1 so not doing anything
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/fsp/fsp_tod_sit_dd.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/fsp/fsp_tod_sit_dd.o
IBM FSP TOD/SIT v1.1 build Jul 2 2004 ID $Id: tod_sit_dd.c,v 1.13.2.2 2004/04/14 14:01:38 garylowe Exp $
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/fsp/fsp_uart.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/fsp/fsp_uart.o
IBM 'Titan-UART' (uart) driver v1.3 <shaun@us.ibm.com>
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/fsp/fsp_port.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/fsp/fsp_port.o
IBM 'Titan-UART' (port) driver v1.3 <shaun@us.ibm.com>
port:0 slot:4 regs:40220900-0950 tx:40220000-0080 rx:40220080-0100 irq:88
port:1 slot:5 regs:40220950-09a0 tx:40220100-0180 rx:40220180-0200 irq:87
port:2 slot:6 regs:402209a0-09f0 tx:40220200-0280 rx:40220280-0300 irq:86
port:3 slot:7 regs:40220a00-0a50 tx:40220300-0380 rx:40220380-0400 irq:85
port:4 slot:8 regs:40220a50-0aa0 tx:40220400-0480 rx:40220480-0500 irq:84
port:5 slot:9 regs:40220aa0-0af0 tx:40220500-0580 rx:40220580-0600 irq:83
port:6 slot:a regs:40220b00-0b50 tx:40220600-0680 rx:40220680-0700 irq:82
port:7 slot:b regs:40220b50-0ba0 tx:40220700-0780 rx:40220780-0800 irq:81
port:8 slot:c regs:40220ba0-0bf0 tx:40220800-0880 rx:40220880-0900 irq:80
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/fsp/hostdma.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/fsp/hostdma.o
IBM Host-DMA (high-level) driver v1.0 <Dean Sanner, IBM>
$Id: dma.c,v 1.22.2.5.2.1 2005/05/18 12:22:51 dsanner Exp $
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/fsp/hostdma_fsp.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/fsp/hostdma_fsp.o
IBM Host-DMA FSP/BlackWidow (low-level) driver v1.0 <Dean Sanner, IBM>
$Id: dma_fsp.c,v 1.21.2.9.2.6.2.1 2006/04/26 12:51:53 dsanner Exp $
+ [ 0 -ne 0 ]
+ echo BB8
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/fsp/mbx.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/fsp/mbx.o
IBM MBX $Id: mbx-dd.c,v 1.46.2.2.2.19.2.1 2006/03/23 15:35:50 cbostic Exp $
mbx-dd.c mbxdd_init_module: MBX:Assuming Hardware >= PASS2
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/fsp/jtag.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/fsp/jtag.o
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-util-fsp.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-util-fsp.o
IIC: util module loaded Mar 25 2009.
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-cbuf-fsp.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-cbuf-fsp.o
IIC: cbuf module loaded Mar 25 2009.
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-core.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-core.o
i2c-core.o: i2c core module
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-dev.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-dev.o
i2c-dev.o: i2c /dev entries driver module
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-algo-fspbase.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-algo-fspbase.o
IIC: IBM FSP Base Algorithm Mar 25 2009.
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-adap-fspbase.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-adap-fspbase.o
IIC: Initializing Base Chip Engines...
Done
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-algo-fspext.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-algo-fspext.o
IIC: IBM FSP Extender Algorithm Mar 25 2009.
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-adap-fspext.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/i2c/i2c-adap-fspext.o
IIC: Initializing Extender Chip Engines...
Done
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/char/fsp_ppc_gpio.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/char/fsp_ppc_gpio.o
FSP GPIO successfully initialized
+ [ 0 -ne 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/mtd/devices/mtddram.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/mtd/devices/mtddram.o
+ [ 0 -ne 0 ]
+ grep 2\.1 /proc/cpuinfo
+ RC=0
+ [ 0 = 0 ]
+ insmod /lib/modules/2.4.18-rc4/kernel/drivers/fsp/fsp_scrub.o
Using /lib/modules/2.4.18-rc4/kernel/drivers/fsp/fsp_scrub.o
IBM HW Memory Scrub device driver v1.0 <dsanner>
$Id: scrub.c,v 1.6.2.2.2.2 2005/04/19 11:22:46 dsanner Exp $
+ [ 0 -ne 0 ]
+ inetd
+ [ 0 -ne 0 ]
+ setsid sh -c while true; do getty 115200 tts/0; sleep 1; done
+ exit 0
TF timer sec: 7200
fsp login: rmgrDisc called
Operation completed successfully
Operation completed successfully
Operation completed successfully
L1: C1001F00
L2:
rmgrDisc called
Operation completed successfully
Operation completed successfully
Operation completed successfully
sttr dscv/VpdCollection value read: 00
surv:BW 2.1(or higher)found.DRAM recovered errors will be monitored
sttr dscv/FspRole role read: 01
rmgr Mux Operation
Take Mux Operation
Operation completed successfully
network-monitor: eth0 link is up
Non-L4 system, not starting 'rempdaemon'
enable_irq(25) unbalanced
enable_irq(25) unbalanced
SSL WARNING: Using passphrase-file ../passphrase
T1024 Generating a SSL key pair. This can take some time...
Your Inputs are:
CardId = 518 SPCN Id = 9f46 Action = ON
L1: C100C1D0
L2:
done.
L1: C100C1D1
L2:
L1: C100C1D0
L2:
*** Soft Switch Operation SUCCESSFUL ***
Your Inputs are:
CardId = 530 SPCN Id = 9f04 Action = OFF
*** Soft Switch Operation SUCCESSFUL ***
Input:arg[1]="--initialize"
Success
Exitting fips dump 0:
L1: C1001F0F
L2:
Force Sync called
Sync of Time, Registry and Files completed
Sync and Notify Operation completed successfully
Operation completed successfully
L1: C1001FFF
L2:
Start Sync called
Operation completed successfully
L1: 01 M V=F
L2: T
fsp login: dev
Password:
BusyBox v0.60.4FSP-GA2-2-3 (2005.05.12-02:15+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
# uname -a
Linux fsp 2.4.18-rc4 #1 Wed Mar 25 15:01:22 UTC 2009 ppc unknown
# cat /proc/version
Linux version 2.4.18-rc4 (root@mcpbuild6) (gcc version 3.2.3 20030401 (prerelease)) #1 Wed Mar 25 15:01:22 UTC 2009
# cat /proc/cpuinfo
cpu : 405F4 FSP 2.1
clock : 200MHz
revision : 20.19 (pvr 5131 1413)
bogomips : 199.47
chip ecid : 00000000 000029b2 5d4c647f 0f15e152
machine : Unidentified 4xx class
plb bus clock : 66MHz
pci bus clock : 33MHz
# /lib/libc.so.6
GNU C Library stable release version 2.2.5, by Roland McGrath et al.
Copyright (C) 1992-2001, 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.2.3 20030401 (prerelease).
Compiled on a Linux 2.4.18-rc4 system on 2005-07-21.
Available extensions:
GNU libio by Per Bothner
crypt add-on version 2.1 by Michael Glad and others
linuxthreads-0.9 by Xavier Leroy
BIND-8.2.3-T5B
libthread_db work sponsored by Alpha Processor Inc
NIS(YP)/NIS+ NSS modules 0.19 by Thorsten Kukuk
software FPU emulation by Richard Henderson, Jakub Jelinek and others
Report bugs using the `glibcbug' script to <bugs@gnu.org>.
# ps -A
PID TTY TIME CMD
1 ? 00:00:04 init
2 ? 00:00:00 keventd
3 ? 00:00:00 ksoftirqd_CPU0
4 ? 00:00:00 kswapd
5 ? 00:00:00 bdflush
6 ? 00:00:01 kupdated
7 ? 00:00:00 nvramd
8 ? 00:00:03 mtdblockd
11 ? 00:00:00 softdog
14 ? 00:00:00 jffs2_gcd_mtd1
22 ? 00:00:00 tiny_syslogd
29 ? 00:00:00 jffs2_gcd_mtd64
44 ? 00:00:00 jffs2_gcd_mtd11
53 ? 00:00:00 jffs2_gcd_mtd48
67 ? 00:00:00 jffs2_gcd_mtd17
160 ? 00:00:00 dhcpcd
215 ? 00:00:00 network-monitor
219 ? 00:00:00 DHCPserver-dete
225 ? 00:00:00 sleep
394 ? 00:00:00 scrubd
397 ? 00:00:00 inetd
399 ? 00:00:00 sh
402 tts/0 00:00:00 sh
408 ? 00:00:00 ctrmserver
409 ? 00:00:00 ctrmserver
414 ? 00:00:00 rmgrd
415 ? 00:00:00 rmgrd
416 ? 00:00:00 rmgrd
417 ? 00:00:00 rmgrd
418 ? 00:00:00 rmgrd
419 ? 00:00:00 rmgrd
426 ? 00:00:00 netcClientGW
430 ? 00:00:00 evennotifier
431 ? 00:00:00 netcClientGW
432 ? 00:00:00 scedserver
433 ? 00:00:00 netcClientGW
434 ? 00:00:00 netcClientGW
435 ? 00:00:00 survmuxapp
436 ? 00:00:00 survmuxapp
437 ? 00:00:00 survmuxapp
439 ? 00:00:00 scedserver
440 ? 00:00:01 scedserver
441 ? 00:00:00 scedserver
442 ? 00:00:00 errlsrv
447 ? 00:00:00 survserver
448 ? 00:00:00 survserver
449 ? 00:00:00 errlsrv
450 ? 00:00:00 survserver
451 ? 00:00:00 errlsrv
452 ? 00:00:00 survserver
454 ? 00:00:00 survserver
463 ? 00:00:00 errlsrv
464 ? 00:00:00 errlsrv
465 ? 00:00:00 errlsrv
470 ? 00:00:00 ppin
471 ? 00:00:00 smgrinit
472 ? 00:00:00 rtiminit
473 ? 00:00:00 rtiminit
477 ? 00:00:00 rtiminit
478 ? 00:00:00 rtiminit
479 ? 00:00:00 panlmain
535 ? 00:00:02 powr_L4
536 ? 00:00:00 powr_L4
537 ? 00:00:00 powr_L4
538 ? 00:00:00 powr_L4
539 ? 00:00:00 powr_L4
540 ? 00:00:00 powr_L4
541 ? 00:00:00 powr_L4
542 ? 00:00:00 powr_L4
589 ? 00:00:00 iplpRegMon
593 ? 00:00:00 panlmain
594 ? 00:00:00 panlmain
595 ? 00:00:00 panlmain
596 ? 00:00:00 panlmain
597 ? 00:00:00 panlmain
599 ? 00:00:00 netsVirtualTTYS
600 ? 00:00:00 netsVirtualTTYS
603 ? 00:00:00 netsVirtualTTYS
604 ? 00:00:00 netsVirtualTTYS
605 ? 00:00:00 netsVirtualTTYS
606 ? 00:00:00 netsVirtualTTYS
607 ? 00:00:00 netsVirtualTTYS
608 ? 00:00:00 netsVirtualTTYS
615 ? 00:00:00 powr_L4
616 ? 00:00:00 powr_L4
617 ? 00:00:00 powr_L4
618 ? 00:00:00 powr_L4
619 ? 00:00:00 powr_L4
620 ? 00:00:00 cecserver
621 ? 00:00:00 cecserver
622 ? 00:00:00 cecserver
623 ? 00:00:00 rponWakeOnLan
628 ? 00:01:26 webs
630 ? 00:00:00 asm
631 ? 00:00:00 asm
632 ? 00:00:01 asm
633 ? 00:00:00 asm
639 ? 00:00:00 rrr
648 ? 00:00:00 callexec
653 ? 00:00:00 netsSlp
1529 ? 00:00:00 sleep
1533 tts/0 00:00:00 ps
1534 ? 00:00:00 cgi
1535 ? 00:00:00 asm
# ps -Afw
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 14:14 ? 00:00:04 init
root 2 1 0 14:14 ? 00:00:00 [keventd]
root 3 0 0 14:14 ? 00:00:00 [ksoftirqd_CPU0]
root 4 0 0 14:14 ? 00:00:00 [kswapd]
root 5 0 0 14:14 ? 00:00:00 [bdflush]
root 6 0 0 14:14 ? 00:00:01 [kupdated]
root 7 1 0 14:14 ? 00:00:00 [nvramd]
root 8 1 0 14:14 ? 00:00:03 [mtdblockd]
root 11 1 0 14:14 ? 00:00:00 /bin/softdog
root 14 1 0 14:14 ? 00:00:00 [jffs2_gcd_mtd1]
root 22 1 0 14:14 ? 00:00:00 /sbin/tiny_syslogd -s 32768
root 29 1 0 14:14 ? 00:00:00 [jffs2_gcd_mtd64]
root 44 1 0 14:14 ? 00:00:00 [jffs2_gcd_mtd11]
root 53 1 0 14:14 ? 00:00:00 [jffs2_gcd_mtd48]
root 67 1 0 14:15 ? 00:00:00 [jffs2_gcd_mtd17]
root 160 1 0 14:15 ? 00:00:00 /sbin/dhcpcd -d -t 20 -z 20 -Y -N -W 900 -b 2580 -L /tmp/dhcpc eth0
root 215 1 0 14:15 ? 00:00:00 /bin/sh /etc/sysconfig/network-scripts/network-monitor
root 219 1 0 14:15 ? 00:00:00 /bin/sh /etc/sysconfig/network-scripts/DHCPserver-detect
root 225 219 0 14:15 ? 00:00:00 sleep 1600
root 394 1 0 14:15 ? 00:00:00 [scrubd]
root 397 1 0 14:15 ? 00:00:00 inetd
root 399 1 0 14:15 ? 00:00:00 sh -c while true; do getty 115200 tts/0; sleep 1; done
root 402 399 0 14:15 tts/0 00:00:00 -sh
root 408 1 0 14:15 ? 00:00:00 ctrmserver
root 409 408 0 14:15 ? 00:00:00 ctrmserver
root 414 1 0 14:15 ? 00:00:00 rmgrd
root 415 414 0 14:15 ? 00:00:00 rmgrd
root 416 415 0 14:15 ? 00:00:00 rmgrd
root 417 415 0 14:15 ? 00:00:00 rmgrd
root 418 415 0 14:15 ? 00:00:00 rmgrd
root 419 415 0 14:15 ? 00:00:00 rmgrd
root 426 1 0 14:15 ? 00:00:00 netcClientGW
root 430 1 0 14:15 ? 00:00:00 evennotifier
root 431 426 0 14:15 ? 00:00:00 netcClientGW
root 432 1 0 14:15 ? 00:00:00 scedserver
root 433 431 0 14:15 ? 00:00:00 netcClientGW
root 434 431 0 14:15 ? 00:00:00 netcClientGW
root 435 1 0 14:15 ? 00:00:00 survmuxapp
root 436 435 0 14:15 ? 00:00:00 survmuxapp
root 437 436 0 14:15 ? 00:00:00 survmuxapp
root 439 432 0 14:15 ? 00:00:00 scedserver
root 440 439 0 14:15 ? 00:00:01 scedserver
root 441 439 0 14:15 ? 00:00:00 scedserver
root 442 1 0 14:15 ? 00:00:00 errlsrv
root 447 1 0 14:15 ? 00:00:00 survserver
root 448 447 0 14:15 ? 00:00:00 survserver
root 449 442 0 14:15 ? 00:00:00 errlsrv
root 450 448 0 14:15 ? 00:00:00 survserver
root 451 449 0 14:15 ? 00:00:00 errlsrv
root 452 448 0 14:15 ? 00:00:00 survserver
root 454 448 0 14:15 ? 00:00:00 survserver
root 463 449 0 14:15 ? 00:00:00 errlsrv
root 464 449 0 14:15 ? 00:00:00 errlsrv
root 465 449 0 14:15 ? 00:00:00 errlsrv
root 470 1 0 14:15 ? 00:00:00 ppin
root 471 1 0 14:15 ? 00:00:00 smgrinit
root 472 1 0 14:15 ? 00:00:00 rtiminit
root 473 472 0 14:15 ? 00:00:00 rtiminit
root 477 473 0 14:15 ? 00:00:00 rtiminit
root 478 473 0 14:15 ? 00:00:00 rtiminit
root 479 1 0 14:15 ? 00:00:00 panlmain
root 535 1 0 14:16 ? 00:00:02 powr_L4
root 536 535 0 14:16 ? 00:00:00 powr_L4
root 537 536 0 14:16 ? 00:00:00 powr_L4
root 538 536 0 14:16 ? 00:00:00 powr_L4
root 539 536 0 14:16 ? 00:00:00 powr_L4
root 540 536 0 14:16 ? 00:00:00 powr_L4
root 541 536 0 14:16 ? 00:00:00 powr_L4
root 542 536 0 14:16 ? 00:00:00 powr_L4
root 589 1 0 14:16 ? 00:00:00 iplpRegMon
root 593 479 0 14:16 ? 00:00:00 panlmain
root 594 593 0 14:16 ? 00:00:00 panlmain
root 595 593 0 14:16 ? 00:00:00 panlmain
root 596 593 0 14:16 ? 00:00:00 panlmain
root 597 593 0 14:16 ? 00:00:00 panlmain
root 599 1 0 14:16 ? 00:00:00 netsVirtualTTYServer serial_1
root 600 1 0 14:16 ? 00:00:00 netsVirtualTTYServer serial_0
root 603 599 0 14:16 ? 00:00:00 netsVirtualTTYServer serial_1
root 604 600 0 14:16 ? 00:00:00 netsVirtualTTYServer serial_0
root 605 603 0 14:16 ? 00:00:00 netsVirtualTTYServer serial_1
root 606 603 0 14:16 ? 00:00:00 netsVirtualTTYServer serial_1
root 607 604 0 14:16 ? 00:00:00 netsVirtualTTYServer serial_0
root 608 604 0 14:16 ? 00:00:00 netsVirtualTTYServer serial_0
root 615 536 0 14:16 ? 00:00:00 powr_L4
root 616 536 0 14:16 ? 00:00:00 powr_L4
root 617 536 0 14:16 ? 00:00:00 powr_L4
root 618 536 0 14:16 ? 00:00:00 powr_L4
root 619 536 0 14:16 ? 00:00:00 powr_L4
root 620 1 0 14:16 ? 00:00:00 cecserver
root 621 620 0 14:16 ? 00:00:00 cecserver
root 622 621 0 14:16 ? 00:00:00 cecserver
root 623 1 0 14:16 ? 00:00:00 rponWakeOnLan -d
root 628 1 24 14:16 ? 00:01:27 webs
root 630 1 0 14:16 ? 00:00:00 asm
root 631 630 0 14:16 ? 00:00:00 asm
root 632 631 0 14:16 ? 00:00:01 asm
root 633 631 0 14:16 ? 00:00:00 asm
root 639 1 0 14:17 ? 00:00:00 rrr -r
root 648 1 0 14:17 ? 00:00:00 callexec -d
root 653 1 0 14:17 ? 00:00:00 netsSlp
root 1529 215 0 14:22 ? 00:00:00 sleep 40
root 1537 628 0 14:22 ? 00:00:00 [cgi <defunct>]
root 1540 402 0 14:22 tts/0 00:00:00 ps -Afw
#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment