bpq32.cfg for GB7RDG

bpq32.cfg

SIMPLE                  ; sets a lot of defaults
NODECALL=GB7RDG         ; Node callsign
NODEALIAS=THURST        ; Node alias (6 characters max)
LOCATOR=IO91lk          ; Maidenhead locator
MAPCOMMENT=40m, 6m, 2m, 70cm

PASSWORD=xxxxxxxx
AUTOSAVE=1
EnableEvents=1
EnableM0LTEMap=1

NODESINTERVAL=60
MINQUAL=10

IDINTERVAL=15
IDMSG:
GB7RDG - Reading - 40m, 6m, 2m, 70cm
***

INFOMSG:
See https://ukpacketradio.network/nodes:gb7rdg
***

CTEXT:
Welcome to GB7RDG. Sysop M0LTE.
Type  ?  for Help
***

BTINTERVAL=5
BTEXT:
GB7RDG node IO91lk67SI - https://packet.oarc.uk
***

; https://www.cantab.net/users/john.wiseman/Documents/BPQCFGFile.html##Port

PORT
  PORTNUM=1
  ID=VHF
  TYPE=ASYNC
  PROTOCOL=KISS
  KISSOPTIONS=ACKMODE
  COMPORT=/dev/serial/by-path/platform-3f980000.usb-usb-0:1.2:1.0
  SPEED=57600
  TXDELAY=100
  FRACK=4000
  PACLEN=150
  DIGIFLAG=1
  QUALITY=191
  MINQUAL=100
ENDPORT

PORT
  PORTNUM=2
  ID=UHF
  TYPE=ASYNC
  PROTOCOL=KISS
  KISSOPTIONS=ACKMODE
  COMPORT=/dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0
  SPEED=57600
  QUALITY=192
  MINQUAL=20
  DIGIFLAG=1
  TXDELAY=30
  PACLEN=236
  FRACK=1000
  MAXFRAME=4
  RESPTIME=200
ENDPORT

PORT
  PORTNUM=3
  ID=7052.75kHz IL2P+CRC QPSK600
  TYPE=ASYNC
  PROTOCOL=KISS
  KISSOPTIONS=ACKMODE
  COMPORT=/dev/serial/by-path/platform-3f980000.usb-usb-0:1.5:1.0
  SPEED=57600
  FRACK=7000
  PACLEN=80
  NODESPACLEN=60
  DIGIFLAG=0
  MAXFRAME=1
  RETRIES=10
  QUALITY=190
  MINQUAL=193
  TXDELAY=100
  TXTAIL=300
  RESPTIME=100
  T3=300
ENDPORT

PORT
  PORTNUM=4
  ID=50.650MHz IL2P+CRC BPSK300
  TYPE=ASYNC
  PROTOCOL=KISS
  KISSOPTIONS=ACKMODE
  COMPORT=/dev/serial/by-path/platform-3f980000.usb-usb-0:1.4:1.0
  SPEED=57600
  FRACK=7000
  PACLEN=80
  NODESPACLEN=60
  DIGIFLAG=0
  MAXFRAME=1
  RETRIES=10
  QUALITY=190
  MINQUAL=193
  TXDELAY=100
  TXTAIL=300
  RESPTIME=100
  T3=300
ENDPORT

PORT
  PORTNUM=7
  ID=Telnet
  DRIVER=Telnet
  CONFIG
    LOGGING=1
    CMS=1
    DisconnectOnClose=0     ;  1 = closes window when you bye
    TCPPORT=8010
    FBBPORT=8011
    HTTPPORT=8008
    LOGINPROMPT=user:
    PASSWORDPROMPT=password:
    MAXSESSIONS=10
    RELAYAPPL=BBS ; RMS
    CTEXT=Welcome to GB7RDG Telnet Server\n Enter ? for list of commands\n\n
    USER=tf,xxxxxxxx,m0lte,,SYSOP
    USER=2e1epq,xxxxxxxx,2e1epq
;   https://www.cantab.net/users/john.wiseman/Documents/LinBPQ%20Applications%20Interface.html
    CMDPORT 63000 63987
ENDPORT

; https://www.cantab.net/users/john.wiseman/Documents/BPQAXIP.htm
PORT
 PORTNUM=8
 ID=OARC-AXIP
 DRIVER=BPQAXIP
 QUALITY=50
 MINQUAL=20
 MAXFRAME=7
 FRACK=7000
 RESPTIME=1000
 RETRIES=10
 UNPROTO=ID
CONFIG
 UDP 10094
 MHEARD ON
 BROADCAST NODES
 NODESINTERVAL 1
 BROADCAST ID

 MAP GB7OUK 10.66.66.3 UDP 10094 B
 MAP MB7NPW 10.66.66.17 UDP 10094 B
 MAP MB7NGP 10.66.66.12 UDP 10094 B

ENDPORT

PORT
 PORTNUM=9
 ID=GB7CIP-AXIP
 DRIVER=BPQAXIP        ; Uses BPQAXIP.DLL
 QUALITY=9             ; Quality factor applied to node broadcasts heard on
                       ; this port, unless overridden by a locked route
                       ; entry. Setting to 0 stops node broadcasts. Was 200
 MINQUAL=0             ; Entries in the nodes table with qualities greater or
                       ; equal to MINQUAL will be sent on this port. A value
                       ; of 0 sends everything.
 MAXFRAME=7            ; Max outstanding frames (1 thru 7)
 FRACK=7000            ; Level 2 timout in milliseconds
 RESPTIME=1000         ; Level 2 delayed ack timer in milliseconds
 RETRIES=10            ; Level 2 maximum retry value
 UNPROTO=ID            ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]]
 ;BCALL=NOCALL          ; BTEXT call. unstated defaults to APPL1CALL
CONFIG
 UDP 10093             ;Listens for UDP packets on this UDP port number
 MHEARD ON
; AUTOADDMAP
 BROADCAST NODES
 BROADCAST ID

; MAP CALL IP-ADDRESS UDP 10093 B
 MAP GB7CIP-5 82.70.39.222 UDP 10093 B
 MAP GB7NXT 79.77.173.61 UDP 10093 B
ENDPORT

LINMAIL
LINCHAT

;APPLICATION n,CMD,New Command,Call,Alias,Quality,L2Alias
;
;n Application Number. You can define up to 32.
;CMD The command the user types
;New Command (optional) The Node command to be run
;Call (optional) The call which directly invokes CMD
;Alias,Quality (optional) If specified, causes an entry for Call and Alias to be added to your NODES table with the specified Quality
;L2Alias (optional)is an additional Alias for direct (L2) connects to the Node.

APPLICATION 1,BBS,,GB7RDG-2,RDGBBS,255
APPLICATION 2,CHAT,,GB7RDG-1,RDGCHT,255

; https://www.cantab.net/users/john.wiseman/Documents/LinBPQ%20Applications%20Interface.html
; APPLICATION 3,LINUX,C 2 HOST 0 S
;APPLICATION 3,TEST,C 2 HOST 0 S

APPLICATION 3,TELSTAR,ATTACH 7 GLASSTTY.COM 6502,GB7RDG-5,TSTARV,0
APPLICATION 4,WALL,C 7 HOST 1 K S

Line 180 - application 'Linux'... Would this serve a shell?