gistfile1.txt

#include "lpc2103.h" 	                                	// LPC2103 MPU Register

/* pototype  section */
void delay_led(unsigned long int);							// Delay Time Function

int main(void)
{
  unsigned long int LED; 									// LED Output Status Buffer

  // Initial all GPIO-0 = Output
  // Reserve P0.0 = TXD(UART0)
  // Reserve P0.1 = RXD(UART0)
  // [xxxx xxxx xxxx xxxx xxxx xxxx xxxx xx--]    
  PINSEL0 = 0x00000000;										// Makesure GPIO0[00..15] = GPIO Function
  PINSEL1 = 0x00000000;										// Makesure GPIO0[16..31] = GPIO Function
  IODIR   = 0xFFFFFFFC; 						         	// Set all GPIO-0[02..31] = Output
  IOSET   = 0xFFFFFFFC;                                  	// Set all GPIO-0 Output Pin(OFF LED)  
 
  // Loop Test Output GPI0-0 //
  while(1)													// Loop Continue
  {    	
	// GPIO0.31 <-- GPIO0.2
    for (LED = 0x00000004; LED < 0x80000000; LED <<= 1)		// Shift Left GPIO-0 (Right <- Left)
    { 
	  IOCLR = LED;											// Clear Output Pin (ON LED)
      delay_led(10000000);									// Display Delay
	  IOSET = LED;                                   		// Set Output Pin (OFF LED)	  
    }  
	  
	// GPIO0.31 ---> GPIO0.2
	for (LED = 0x80000000; LED > 0x00000004; LED >>= 1)		// Shift Right GPIO-0(Right -> Left)
    { 
	  IOCLR = LED;											// Clear Output Pin (ON LED)
      delay_led(10000000);									// Display Delay
	  IOSET = LED;                                   		// Set Output Pin (OFF LED)
    }  	  
  }   
}	  

/***********************/
/* Delay Time Function */
/*    1-4294967296     */
/***********************/
void delay_led(unsigned long int count1)
{
  while(count1 > 0) {count1--;}								// Loop Decrease Counter	
}

//********************************************************************************************
Make file

################################################################################
# Automatically-generated file. Do not edit!
################################################################################

-include ../makefile.init

RM := rm -rf

# All of the sources participating in the build are defined here
-include sources.mk
-include subdir.mk
-include objects.mk

ifneq ($(MAKECMDGOALS),clean)
ifneq ($(strip $(C_DEPS)),)
-include $(C_DEPS)
endif
ifneq ($(strip $(ASM_DEPS)),)
-include $(ASM_DEPS)
endif
ifneq ($(strip $(S_UPPER_DEPS)),)
-include $(S_UPPER_DEPS)
endif
endif

-include ../makefile.defs

# Add inputs and outputs from these tool invocations to the build variables 
SECONDARY_FLASH += \
armer.hex \

SECONDARY_LIST += \
armer.lst \

SECONDARY_SIZE += \
armer.siz \


# All Target
all: armer.elf secondary-outputs

# Tool invocations
armer.elf: $(OBJS) $(USER_OBJS)
	@echo 'Building target: $@'
	@echo 'Invoking: ARM Sourcery Linux GCC C Linker'
	@@arm-none-linux-gnueabi-gcc -nodefaultlibs -Wl,-Map,armer.map -mcpu=arm7tdmi -mthumb -g3 -gdwarf-2 -o"armer.elf" $(OBJS) $(USER_OBJS) $(LIBS)
        arm-none-linux-gnueabi-gcc -ffreestanding -Wl,-Map,armer.map -Wl,-e,main -mapcs-32,-mabi=aapcs-linux -mcpu=arm7tdmi -mthumb -g3 -gdwarf-2 -o armer.elf $(OBJS) $(USER_OBJS) $(LIBS)
        
	@echo 'Finished building target: $@'
	@echo ' '

armer.hex: armer.elf
	@echo 'Invoking: ARM Sourcery Linux GNU Create Flash Image'
	arm-none-linux-gnueabi-objcopy -O ihex armer.elf "armer.hex"
	@echo 'Finished building: $@'
	@echo ' '

armer.lst: armer.elf
	@echo 'Invoking: ARM Sourcery Linux GNU Create Listing'
	arm-none-linux-gnueabi-objdump -h -S armer.elf >"armer.lst"
	@echo 'Finished building: $@'
	@echo ' '

armer.siz: armer.elf
	@echo 'Invoking: ARM Sourcery Linux GNU Print Size'
	arm-none-linux-gnueabi-size  --format=berkeley armer.elf
	@echo 'Finished building: $@'
	@echo ' '

# Other Targets
clean:
	-$(RM) $(SECONDARY_SIZE)$(OBJS)$(C_DEPS)$(ASM_DEPS)$(SECONDARY_FLASH)$(EXECUTABLES)$(SECONDARY_LIST)$(S_UPPER_DEPS) armer.elf
	-@echo ' '

secondary-outputs: $(SECONDARY_FLASH) $(SECONDARY_LIST) $(SECONDARY_SIZE)

.PHONY: all clean dependents
.SECONDARY:

-include ../makefile.targets