ManzDev/conky.conf

## conky.conf
# conky configuration
# edited by twitter.com/Manz (based on darcon@gmail.com)

# set to yes if you want Conky to be forked in the background
background no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
#xftfont Bitstream Vera Sans Mono:size=8
#xftfont Terminus:size=8
xftfont Envy Code R:size=9

# Text alpha when using Xft
xftalpha 0.8

# Print everything to console?
# out_to_console no

# mail spool
#mail_spool $MAIL

# Update interval in seconds
update_interval 2.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
#own_window no

# support for xcompmgr
own_window yes
own_window_transparent yes
own_window_type desktop

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 180 5

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 8

# border margins
#border_margin 4

# border width
border_width 0

# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color white

# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text
# same thing as passing -x at command line
#gap_x 450
gap_x 1
gap_y 1

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes

# Add spaces to keep things from moving about?  This only affects certain objects.
#use_spacer yes
#Note: doesn't work in conky 1.2 =(

#   mldonkey_hostname     Hostname for mldonkey stuff, defaults to localhost
#   mldonkey_port         Mldonkey port, 4001 default
#   mldonkey_login        Mldonkey login, default none
#   mldonkey_password     Mldonkey password, default none


# Possible variables to be used:
#
#      Variable         Arguments                  Description

# 	addr              (interface)   IP address for an interface
# 	acpiacadapter                   ACPI ac adapter state.
# 	acpifan                         ACPI fan state
# 	acpitemp                        ACPI temperature.
# 	adt746xcpu                      CPU temperature from therm_adt746x
# 	adt746xfan                      Fan speed from therm_adt746x
# 	alignr            (num)         Right-justify text, with space of N
# 	alignc                          Align text to centre
# 	battery           (num)         Remaining capasity in ACPI or APM
# 					battery. ACPI battery number can be
# 					given as argument (default is BAT0).
# 	buffers                         Amount of memory buffered
# 	cached                          Amount of memory cached
# 	color             (color)       Change drawing color to color
# 	cpu                             CPU usage in percents
# 	cpubar            (height)      Bar that shows CPU usage, height is
# 					bar's height in pixels
# 	cpugraph          (height),(width) (gradient colour 1) (gradient colour 2)
# 					CPU usage graph, with optional colours in hex,
# 					minus the #.
# 	downspeed         net           Download speed in kilobytes
# 	downspeedf        net           Download speed in kilobytes with one
# 					decimal
# 	downspeedgraph    net (height),(width) (gradient colour 1) (gradient colour 2)
# 					Download speed graph, colours defined in
# 					hex, minus the #.
# 	exec              shell command Executes a shell command and displays
# 					the output in conky. warning: this
# 					takes a lot more resources than other
# 					variables. I'd recommend coding wanted
# 					behaviour in C and posting a patch :-).
# 	execbar           shell command Same as exec, except if the first value
# 					return is a value between 0-100, it
# 					will use that number for a bar.
# 					The size for the bar is currently fixed,
# 					but that may change in the future.
# 	execgraph         shell command Same as execbar, but graphs values
# 	execi             interval, shell command
#  					Same as exec but with specific interval.
# 					Interval can't be less than
# 					update_interval in configuration.
#	font		  font		Specify a different font.  Only applies
#					to one line.
# 	fs_bar            (height), (fs)Bar that shows how much space is used on
# 					a file system. height is the height in
# 					pixels. fs is any file on that file
# 					system.
# 	fs_free           (fs)          Free space on a file system available
# 					for users.
# 	fs_free_perc      (fs)          Free percentage of space on a file
# 					system available for users.
# 	fs_size           (fs)          File system size
# 	fs_used           (fs)          File system used space
# 	hr                (height)      Horizontal line, height is the height in
# 					pixels
# 	i2c               (dev), type, n  I2C sensor from sysfs (Linux 2.6). dev
# 					may be omitted if you have only one I2C
# 					device. type is either in (or vol)
# 					meaning voltage, fan meaning fan or
# 					temp/tempf (first in C, second in F)
# 					meaning temperature. n is number of the
# 					sensor. See /sys/bus/i2c/devices/ on
# 					your local computer.
# 	if_running        (process)     if PROCESS is running, display
# 					everything if_running and the matching $endif
# 	if_existing       (file)        if FILE exists, display everything between
# 					if_existing and the matching $endif
# 	if_mounted        (mountpoint)  if MOUNTPOINT is mounted, display everything between
# 					if_mounted and the matching $endif
# 	else                            Text to show if any of the above are not true
# 	kernel                          Kernel version
# 	linkstatus        (interface)   Get the link status for wireless connections
# 	loadavg           (1), (2), (3) System load average, 1 is for past 1
# 					minute, 2 for past 5 minutes and 3 for
# 					past 15 minutes.
# 	machine                         Machine, i686 for example
# 	mails                           Mail count in mail spool. You can use
# 					program like fetchmail to get mails from
# 					some server using your favourite
# 					protocol. See also new_mails.
# 	mem                             Amount of memory in use
# 	membar            (height)      Bar that shows amount of memory in use
# 	memmax                          Total amount of memory
# 	memperc                         Percentage of memory in use
#
# 	metar_ob_time
# 	metar_temp
# 	metar_tempf                     Temp in F
# 	metar_windchill
# 	metar_dew_point                 There are a bunch of these
# 	metar_rh                        and they are self-explanatory
# 	metar_windspeed
# 	metar_winddir
# 	metar_swinddir
# 	metar_cloud
# 	metar_u2d_time
#
# 	ml_upload_counter               total session upload in mb
# 	ml_download_counter             total session download in mb
# 	ml_nshared_files                number of shared files
# 	ml_shared_counter               total session shared in mb, buggy
# 					in some mldonkey versions
# 	ml_tcp_upload_rate              tcp upload rate in kb/s
# 	ml_tcp_download_rate            tcp download rate in kb/s
# 	ml_udp_upload_rate              udp upload rate in kb/s
# 	ml_udp_download_rate            udp download rate in kb/s
# 	ml_ndownloaded_files            number of completed files
# 	ml_ndownloading_files           number of downloading files
#
# 	mpd_artist			Artist in current MPD song
# 					(must be enabled at compile)
# 	mpd_album			Album in current MPD song
# 	mpd_bar           (height)      Bar of mpd's progress
# 	mpd_bitrate                     Bitrate of current song
# 	mpd_status                      Playing, stopped, et cetera.
# 	mpd_title			Title of current MPD song
# 	mpd_vol				MPD's volume
# 	mpd_elapsed                     Song's elapsed time
# 	mpd_length                      Song's length
# 	mpd_percent                     Percent of song's progress
# 	new_mails                       Unread mail count in mail spool.
# 	nodename                        Hostname
# 	outlinecolor      (color)       Change outline color
# 	pre_exec          shell command Executes a shell command one time before
# 					conky displays anything and puts output
# 					as text.
# 	processes                       Total processes (sleeping and running)
# 	running_processes               Running processes (not sleeping),
# 					requires Linux 2.6
# 	shadecolor        (color)       Change shading color
# 	stippled_hr       (space),      Stippled (dashed) horizontal line
# 			(height)
# 	swapbar           (height)      Bar that shows amount of swap in use
# 	swap                            Amount of swap in use
# 	swapmax                         Total amount of swap
# 	swapperc                        Percentage of swap in use
# 	sysname                         System name, Linux for example
# 	offset            pixels        Move text over by N pixels
# 	tail              logfile, lines (interval)
# 					Displays last N lines of supplied text
# 					text file.  If interval is not supplied,
# 					Conky assumes 2x Conky's interval.
# 					Max of 30 lines.
# 					Max of 30 lines can be displayed.
# 	time              (format)      Local time, see man strftime to get more
# 					information about format
# 	totaldown         net           Total download, overflows at 4 GB on
# 					Linux with 32-bit arch and there doesn't
# 					seem to be a way to know how many times
# 					it has already done that before conky
# 					has started.
# 	top               type, num     This takes arguments in the form:
# 					top <name> <number>
# 					Basically, processes are ranked from
# 					highest to lowest in terms of cpu
# 					usage, which is what <num> represents.
# 					The types are: "name", "pid", "cpu", and
# 					"mem".
# 					There can be a max of 10 processes listed.
# 	top_mem           type, num     Same as top, except sorted by mem usage
# 					instead of cpu
# 	totalup           net           Total upload, this one too, may overflow
# 	updates                         Number of updates (for debugging)
# 	upspeed           net           Upload speed in kilobytes
# 	upspeedf          net           Upload speed in kilobytes with one
# 					decimal
# 	upspeedgraph      net (height),(width)  (gradient colour 1) (gradient colour 2)
# 					Upload speed graph, colours defined in
# 					hex, minus the #.
# 	uptime                          Uptime
# 	uptime_short                    Uptime in a shorter format
#
# 	seti_prog                       Seti@home current progress
# 	seti_progbar      (height)      Seti@home current progress bar
# 	seti_credit                     Seti@hoome total user credit


# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument

# stuff after 'TEXT' will be formatted on screen

TEXT


${offset 20}${color slate grey}${time %a, } ${color }${time %e %B %G}
${offset 20}${color slate grey}${time %Z,    }${color }${time %H:%M:%S}
${offset 20}${color slate grey}UpTime: ${color }$uptime
${offset 20}${color slate grey}Kern:${color }$kernel
${offset 20}${color slate grey}CPU:${color } $cpu% (${acpitemp}°C) ${cpubar 10,40}
${offset 20}${color slate grey}Bat:${color green} $battery ${color}
${offset 20}${cpugraph 20,130 000000 ffffff}
${offset 20}${color slate grey}Load: ${color }$loadavg
${offset 20}${color slate grey}Processes: ${color }$running_processes/$processes

${offset 20}${color slate grey}Highest CPU:
${offset 20}${color #ddaa00} ${top name 1}${top_mem cpu 1}
${offset 20}${color lightgrey} ${top name 2}${top cpu 2}
${offset 20}${color lightgrey} ${top name 3}${top cpu 3}
${offset 20}${color lightgrey} ${top name 4}${top cpu 4}

${offset 20}${color slate grey}Highest MEM:
${offset 20}${color #ddaa00} ${top_mem name 1}${top_mem mem 1}
${offset 20}${color lightgrey} ${top_mem name 2}${top_mem mem 2}
${offset 20}${color lightgrey} ${top_mem name 3}${top_mem mem 3}
${offset 20}${color lightgrey} ${top_mem name 4}${top_mem mem 4}

${offset 20}${color slate grey}MEM: ${color } $memperc% $mem/$memmax
${offset 20}${membar 3,100}
${offset 20}${color slate grey}SWAP: ${color }$swapperc% $swap/$swapmax
${offset 20}${swapbar 3,100}
${offset 20}${color slate grey}HOME: ${color }${fs_free /home}/${fs_size /home}
${offset 20}${fs_bar 3,100 /home}

${if_existing /proc/net/route wlan0}
${offset 20}Conectado por ${color green}WiFi${color}
${offset 20}${color}Subida: ${color }${upspeed wlan0}/s
${offset 20}${upspeedgraph wlan0 20,130 000000 ffffff}
${offset 20}${color}Bajada: ${color }${downspeed wlan0}/s${color}
${offset 20}${downspeedgraph wlan0 20,130 000000 ffffff}
${endif}

${if_existing /proc/net/route eth0}
${offset 20}Conectado por cable
${offset 20}${color}Up: ${color }${upspeed eth0} k/s
${offset 20}${upspeedgraph eth0 20,130 000000 ffffff}
${offset 20}${color}Down: ${color }${downspeed eth0}k/s${color}
${offset 20}${downspeedgraph eth0 20,130 000000 ffffff}
${endif}
	# conky configuration
	# edited by twitter.com/Manz (based on darcon@gmail.com)

	# set to yes if you want Conky to be forked in the background
	background no

	# X font when Xft is disabled, you can pick one with program xfontsel
	#font 5x7
	#font 6x10
	#font 7x13
	#font 8x13
	#font 9x15
	#font mintsmild.se
	#font -------34-------*

	# Use Xft?
	use_xft yes

	# Xft font when Xft is enabled
	#xftfont Bitstream Vera Sans Mono:size=8
	#xftfont Terminus:size=8
	xftfont Envy Code R:size=9

	# Text alpha when using Xft
	xftalpha 0.8

	# Print everything to console?
	# out_to_console no

	# mail spool
	#mail_spool $MAIL

	# Update interval in seconds
	update_interval 2.0

	# This is the number of times Conky will update before quitting.
	# Set to zero to run forever.
	total_run_times 0

	# Create own window instead of using desktop (required in nautilus)
	#own_window no

	# support for xcompmgr
	own_window yes
	own_window_transparent yes
	own_window_type desktop

	# Use double buffering (reduces flicker, may not work for everyone)
	double_buffer yes

	# Minimum size of text area
	minimum_size 180 5

	# Draw shades?
	draw_shades yes

	# Draw outlines?
	draw_outline no

	# Draw borders around text
	draw_borders no

	# Stippled borders?
	stippled_borders 8

	# border margins
	#border_margin 4

	# border width
	border_width 0

	# Default colors and also border colors
	default_color white
	default_shade_color black
	default_outline_color white

	# Text alignment, other possible values are commented
	alignment top_left
	#alignment top_right
	#alignment bottom_left
	#alignment bottom_right

	# Gap between borders of screen and text
	# same thing as passing -x at command line
	#gap_x 450
	gap_x 1
	gap_y 1

	# Subtract file system buffers from used memory?
	no_buffers yes

	# set to yes if you want all text to be in uppercase
	uppercase no

	# number of cpu samples to average
	# set to 1 to disable averaging
	cpu_avg_samples 2

	# number of net samples to average
	# set to 1 to disable averaging
	net_avg_samples 2

	# Force UTF8? note that UTF8 support required XFT
	override_utf8_locale yes

	# Add spaces to keep things from moving about? This only affects certain objects.
	#use_spacer yes
	#Note: doesn't work in conky 1.2 =(

	# mldonkey_hostname Hostname for mldonkey stuff, defaults to localhost
	# mldonkey_port Mldonkey port, 4001 default
	# mldonkey_login Mldonkey login, default none
	# mldonkey_password Mldonkey password, default none


	# Possible variables to be used:
	#
	# Variable Arguments Description

	# addr (interface) IP address for an interface
	# acpiacadapter ACPI ac adapter state.
	# acpifan ACPI fan state
	# acpitemp ACPI temperature.
	# adt746xcpu CPU temperature from therm_adt746x
	# adt746xfan Fan speed from therm_adt746x
	# alignr (num) Right-justify text, with space of N
	# alignc Align text to centre
	# battery (num) Remaining capasity in ACPI or APM
	# battery. ACPI battery number can be
	# given as argument (default is BAT0).
	# buffers Amount of memory buffered
	# cached Amount of memory cached
	# color (color) Change drawing color to color
	# cpu CPU usage in percents
	# cpubar (height) Bar that shows CPU usage, height is
	# bar's height in pixels
	# cpugraph (height),(width) (gradient colour 1) (gradient colour 2)
	# CPU usage graph, with optional colours in hex,
	# minus the #.
	# downspeed net Download speed in kilobytes
	# downspeedf net Download speed in kilobytes with one
	# decimal
	# downspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
	# Download speed graph, colours defined in
	# hex, minus the #.
	# exec shell command Executes a shell command and displays
	# the output in conky. warning: this
	# takes a lot more resources than other
	# variables. I'd recommend coding wanted
	# behaviour in C and posting a patch :-).
	# execbar shell command Same as exec, except if the first value
	# return is a value between 0-100, it
	# will use that number for a bar.
	# The size for the bar is currently fixed,
	# but that may change in the future.
	# execgraph shell command Same as execbar, but graphs values
	# execi interval, shell command
	# Same as exec but with specific interval.
	# Interval can't be less than
	# update_interval in configuration.
	# font font Specify a different font. Only applies
	# to one line.
	# fs_bar (height), (fs)Bar that shows how much space is used on
	# a file system. height is the height in
	# pixels. fs is any file on that file
	# system.
	# fs_free (fs) Free space on a file system available
	# for users.
	# fs_free_perc (fs) Free percentage of space on a file
	# system available for users.
	# fs_size (fs) File system size
	# fs_used (fs) File system used space
	# hr (height) Horizontal line, height is the height in
	# pixels
	# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
	# may be omitted if you have only one I2C
	# device. type is either in (or vol)
	# meaning voltage, fan meaning fan or
	# temp/tempf (first in C, second in F)
	# meaning temperature. n is number of the
	# sensor. See /sys/bus/i2c/devices/ on
	# your local computer.
	# if_running (process) if PROCESS is running, display
	# everything if_running and the matching $endif
	# if_existing (file) if FILE exists, display everything between
	# if_existing and the matching $endif
	# if_mounted (mountpoint) if MOUNTPOINT is mounted, display everything between
	# if_mounted and the matching $endif
	# else Text to show if any of the above are not true
	# kernel Kernel version
	# linkstatus (interface) Get the link status for wireless connections
	# loadavg (1), (2), (3) System load average, 1 is for past 1
	# minute, 2 for past 5 minutes and 3 for
	# past 15 minutes.
	# machine Machine, i686 for example
	# mails Mail count in mail spool. You can use
	# program like fetchmail to get mails from
	# some server using your favourite
	# protocol. See also new_mails.
	# mem Amount of memory in use
	# membar (height) Bar that shows amount of memory in use
	# memmax Total amount of memory
	# memperc Percentage of memory in use
	#
	# metar_ob_time
	# metar_temp
	# metar_tempf Temp in F
	# metar_windchill
	# metar_dew_point There are a bunch of these
	# metar_rh and they are self-explanatory
	# metar_windspeed
	# metar_winddir
	# metar_swinddir
	# metar_cloud
	# metar_u2d_time
	#
	# ml_upload_counter total session upload in mb
	# ml_download_counter total session download in mb
	# ml_nshared_files number of shared files
	# ml_shared_counter total session shared in mb, buggy
	# in some mldonkey versions
	# ml_tcp_upload_rate tcp upload rate in kb/s
	# ml_tcp_download_rate tcp download rate in kb/s
	# ml_udp_upload_rate udp upload rate in kb/s
	# ml_udp_download_rate udp download rate in kb/s
	# ml_ndownloaded_files number of completed files
	# ml_ndownloading_files number of downloading files
	#
	# mpd_artist Artist in current MPD song
	# (must be enabled at compile)
	# mpd_album Album in current MPD song
	# mpd_bar (height) Bar of mpd's progress
	# mpd_bitrate Bitrate of current song
	# mpd_status Playing, stopped, et cetera.
	# mpd_title Title of current MPD song
	# mpd_vol MPD's volume
	# mpd_elapsed Song's elapsed time
	# mpd_length Song's length
	# mpd_percent Percent of song's progress
	# new_mails Unread mail count in mail spool.
	# nodename Hostname
	# outlinecolor (color) Change outline color
	# pre_exec shell command Executes a shell command one time before
	# conky displays anything and puts output
	# as text.
	# processes Total processes (sleeping and running)
	# running_processes Running processes (not sleeping),
	# requires Linux 2.6
	# shadecolor (color) Change shading color
	# stippled_hr (space), Stippled (dashed) horizontal line
	# (height)
	# swapbar (height) Bar that shows amount of swap in use
	# swap Amount of swap in use
	# swapmax Total amount of swap
	# swapperc Percentage of swap in use
	# sysname System name, Linux for example
	# offset pixels Move text over by N pixels
	# tail logfile, lines (interval)
	# Displays last N lines of supplied text
	# text file. If interval is not supplied,
	# Conky assumes 2x Conky's interval.
	# Max of 30 lines.
	# Max of 30 lines can be displayed.
	# time (format) Local time, see man strftime to get more
	# information about format
	# totaldown net Total download, overflows at 4 GB on
	# Linux with 32-bit arch and there doesn't
	# seem to be a way to know how many times
	# it has already done that before conky
	# has started.
	# top type, num This takes arguments in the form:
	# top <name> <number>
	# Basically, processes are ranked from
	# highest to lowest in terms of cpu
	# usage, which is what <num> represents.
	# The types are: "name", "pid", "cpu", and
	# "mem".
	# There can be a max of 10 processes listed.
	# top_mem type, num Same as top, except sorted by mem usage
	# instead of cpu
	# totalup net Total upload, this one too, may overflow
	# updates Number of updates (for debugging)
	# upspeed net Upload speed in kilobytes
	# upspeedf net Upload speed in kilobytes with one
	# decimal
	# upspeedgraph net (height),(width) (gradient colour 1) (gradient colour 2)
	# Upload speed graph, colours defined in
	# hex, minus the #.
	# uptime Uptime
	# uptime_short Uptime in a shorter format
	#
	# seti_prog Seti@home current progress
	# seti_progbar (height) Seti@home current progress bar
	# seti_credit Seti@hoome total user credit


	# variable is given either in format $variable or in ${variable}. Latter
	# allows characters right after the variable and must be used in network
	# stuff because of an argument

	# stuff after 'TEXT' will be formatted on screen

	TEXT



	${offset 20}${color slate grey}${time %a, } ${color }${time %e %B %G}
	${offset 20}${color slate grey}${time %Z, }${color }${time %H:%M:%S}
	${offset 20}${color slate grey}UpTime: ${color }$uptime
	${offset 20}${color slate grey}Kern:${color }$kernel
	${offset 20}${color slate grey}CPU:${color } $cpu% (${acpitemp}°C) ${cpubar 10,40}
	${offset 20}${color slate grey}Bat:${color green} $battery ${color}
	${offset 20}${cpugraph 20,130 000000 ffffff}
	${offset 20}${color slate grey}Load: ${color }$loadavg
	${offset 20}${color slate grey}Processes: ${color }$running_processes/$processes

	${offset 20}${color slate grey}Highest CPU:
	${offset 20}${color #ddaa00} ${top name 1}${top_mem cpu 1}
	${offset 20}${color lightgrey} ${top name 2}${top cpu 2}
	${offset 20}${color lightgrey} ${top name 3}${top cpu 3}
	${offset 20}${color lightgrey} ${top name 4}${top cpu 4}

	${offset 20}${color slate grey}Highest MEM:
	${offset 20}${color #ddaa00} ${top_mem name 1}${top_mem mem 1}
	${offset 20}${color lightgrey} ${top_mem name 2}${top_mem mem 2}
	${offset 20}${color lightgrey} ${top_mem name 3}${top_mem mem 3}
	${offset 20}${color lightgrey} ${top_mem name 4}${top_mem mem 4}

	${offset 20}${color slate grey}MEM: ${color } $memperc% $mem/$memmax
	${offset 20}${membar 3,100}
	${offset 20}${color slate grey}SWAP: ${color }$swapperc% $swap/$swapmax
	${offset 20}${swapbar 3,100}
	${offset 20}${color slate grey}HOME: ${color }${fs_free /home}/${fs_size /home}
	${offset 20}${fs_bar 3,100 /home}

	${if_existing /proc/net/route wlan0}
	${offset 20}Conectado por ${color green}WiFi${color}
	${offset 20}${color}Subida: ${color }${upspeed wlan0}/s
	${offset 20}${upspeedgraph wlan0 20,130 000000 ffffff}
	${offset 20}${color}Bajada: ${color }${downspeed wlan0}/s${color}
	${offset 20}${downspeedgraph wlan0 20,130 000000 ffffff}
	${endif}

	${if_existing /proc/net/route eth0}
	${offset 20}Conectado por cable
	${offset 20}${color}Up: ${color }${upspeed eth0} k/s
	${offset 20}${upspeedgraph eth0 20,130 000000 ffffff}
	${offset 20}${color}Down: ${color }${downspeed eth0}k/s${color}
	${offset 20}${downspeedgraph eth0 20,130 000000 ffffff}
	${endif}