gistfile1.txt

/ # uname -a
Linux (none) 4.18.0 #1-postmarketos-qcom SMP Mon Sep 24 22:07:03 UTC 2018 armv7l Linux
/ # dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.18.0 (pmos@msi) (gcc version 6.4.0 (Alpine 6.4.0)) #1-postmarketos-qcom SMP Mon Sep 24 22:07:03 UTC 2018
[    0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: LGE MSM 8974 HAMMERHEAD
[    0.000000] cma: early_cma(1024m)
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: dma_contiguous_reserve(limit ffffffff)
[    0.000000] cma: dma_contiguous_reserve: reserving 1024 MiB for global area
[    0.000000] cma: cma_declare_contiguous(size 0x40000000, base 0x00000000, limit 0xffffffff alignment 0x00000000)
[    0.000000] cma: Reserved 1024 MiB at 0x40000000
[    0.000000] On node 0 totalpages: 491776
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 164096 pages, LIFO batch:31
[    0.000000]   HighMem zone: 327680 pages, LIFO batch:31
[    0.000000] random: get_random_bytes called from start_kernel+0x7c/0x408 with crng_init=0
[    0.000000] percpu: Embedded 15 pages/cpu @(ptrval) s30092 r8192 d23156 u61440
[    0.000000] pcpu-alloc: s30092 r8192 d23156 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 490048
[    0.000000] Kernel command line: console=ttyMSM0,115200,n8 androidboot.hardware=hammerhead user_debug=31 maxcpus=2 msm_watchdog_v2.enable=1 cma=1024m msm.vram=778m g_mass_storage.removable=y uart_console=enable gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 androidboot.laf androidboot.emmc=true androidboot.serialno=02c790c20937bd48 androidboot.bootloader=HHZ20h androidboot.baseband=msm bootreason=reboot_by_key androidboot.hardware.sku=D821 androidboot.hardware.ddr=hynix androidboot.hardware.display=orise androidboot.revision=11
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 886848K/1967104K available (7168K kernel code, 337K rwdata, 1912K rodata, 1024K init, 244K bss, 31680K reserved, 1048576K cma-reserved, 262144K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (8160 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 338 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 245 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU event tracing is enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000016] Switching to timer-based delay loop, resolution 52ns
[    0.000329] Console: colour dummy device 80x30
[    0.000357] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000373] pid_max: default: 32768 minimum: 301
[    0.000519] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000534] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001139] CPU: Testing write buffer coherency: ok
[    0.001386] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001979] Setting up static identity map for 0x100000 - 0x100060
[    0.002092] Hierarchical SRCU implementation.
[    0.002714] smp: Bringing up secondary CPUs ...
[    0.003361] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.003521] smp: Brought up 1 node, 2 CPUs
[    0.003535] SMP: Total of 2 processors activated (76.80 BogoMIPS).
[    0.003543] CPU: All CPU(s) started in SVC mode.
[    0.005325] devtmpfs: initialized
[    0.017862] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 0
[    0.018043] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.018062] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.064246] pinctrl core: initialized pinctrl subsystem
[    0.064651] regulator-dummy: no parameters
[    0.065055] NET: Registered protocol family 16
[    0.065367] cma: cma_alloc(cma (ptrval), count 64, align 6)
[    0.066642] cma: cma_alloc(): returned (ptrval)
[    0.066919] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.068464] NET: Registered protocol family 42
[    0.101142] reg-fixed-voltage vreg-boost: could not find pctldev for node /soc/spmi@fc4cf000/pm8941@0/gpios@c000/boost-bypass, deferring probe
[    0.101250] vph-pwr: 3600 mV 
[    0.101408] reg-fixed-voltage vreg-vph-pwr: vph-pwr supplying 3600000uV
[    0.101531] wl-reg: 3300 mV 
[    0.101696] reg-fixed-voltage wlan-regulator: wl-reg supplying 3300000uV
[    0.101746] reg-fixed-voltage avdd33: could not find pctldev for node /soc/spmi@fc4cf000/pm8941@0/gpios@c000/anxvdd3, deferring probe
[    0.101784] reg-fixed-voltage vdd10: could not find pctldev for node /soc/spmi@fc4cf000/pm8941@0/gpios@c000/anxvdd1, deferring probe
[    0.102484] usbcore: registered new interface driver usbfs
[    0.102541] usbcore: registered new interface driver hub
[    0.102604] usbcore: registered new device driver usb
[    0.102724] media: Linux media interface: v0.10
[    0.102765] videodev: Linux video capture interface: v2.00
[    0.103713] Advanced Linux Sound Architecture Driver Initialized.
[    0.104153] Bluetooth: Core ver 2.22
[    0.104192] NET: Registered protocol family 31
[    0.104201] Bluetooth: HCI device and connection manager initialized
[    0.104215] Bluetooth: HCI socket layer initialized
[    0.104229] Bluetooth: L2CAP socket layer initialized
[    0.104274] Bluetooth: SCO socket layer initialized
[    0.104615] clocksource: Switched to clocksource arch_sys_counter
[    0.114906] NET: Registered protocol family 2
[    0.115342] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.115365] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.115414] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.115492] TCP: Hash tables configured (established 8192 bind 8192)
[    0.115574] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.115599] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.115763] NET: Registered protocol family 1
[    0.116426] Trying to unpack rootfs image as initramfs...
[    0.213804] Freeing initrd memory: 1276K
[    0.215535] Initialise system trusted keyrings
[    0.215750] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    0.227902] Key type asymmetric registered
[    0.227914] Asymmetric key parser 'x509' registered
[    0.227967] bounce: pool size: 64 pages
[    0.228016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.228028] io scheduler noop registered
[    0.228038] io scheduler deadline registered
[    0.228284] io scheduler cfq registered (default)
[    0.228296] io scheduler mq-deadline registered
[    0.228305] io scheduler kyber registered
[    0.249162] L2 @ 729600 KHz
[    0.249355] CPU0 @ 960000 KHz
[    0.249365] CPU1 @ QSB rate. Forcing new rate.
[    0.249528] CPU1 @ 384000 KHz
[    0.249538] CPU2 @ QSB rate. Forcing new rate.
[    0.249609] CPU2 @ 384000 KHz
[    0.249618] CPU3 @ QSB rate. Forcing new rate.
[    0.249687] CPU3 @ 384000 KHz
[    0.254514] ocmem fdd00000.ocmem: Unable to get the core clock
[    0.328185] msm_serial f991d000.serial: msm_serial: detected port #0
[    0.328226] msm_serial f991d000.serial: uartclk = 7372800
[    0.328276] f991d000.serial: ttyMSM0 at MMIO 0xf991d000 (irq = 28, base_baud = 460800) is a MSM
[    0.328970] msm_serial f9960000.serial: msm_serial: detected port #1
[    0.329004] msm_serial f9960000.serial: uartclk = 19200000
[    0.329047] f9960000.serial: ttyMSM1 at MMIO 0xf9960000 (irq = 29, base_baud = 1200000) is a MSM
[    0.329222] serial serial0: tty port ttyMSM1 registered
[    0.329407] msm_serial: driver initialized
[    0.333004] msm_dsi_phy fd922a00.dsi-phy: Looking up vddio-supply from device tree
[    0.333021] msm_dsi_phy fd922a00.dsi-phy: Failed to get supply 'vddio': -517
[    0.333036] msm_dsi_phy fd922a00.dsi-phy: dsi_phy_regulator_init: failed to init regulator, ret=-517
[    0.333047] msm_dsi_phy fd922a00.dsi-phy: dsi_phy_driver_probe: failed to init regulator
[    0.333830] msm_hdmi_phy fd922500.hdmi-phy: Looking up core-vdda-supply from device tree
[    0.333846] msm_hdmi_phy fd922500.hdmi-phy: failed to get phy regulator: core-vdda (-517)
[    0.338370] brd: module loaded
[    0.339312] spmi spmi-0: PMIC arbiter version v1 (0x20000002)
[    0.364397] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_s1-supply from device tree
[    0.364425] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_s1-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.364445] s1: supplied by regulator-dummy
[    0.364474] regulator-dummy: could not add device link regulator.3 err -2
[    0.364691] s1: at 1275 mV 
[    0.365049] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_s2-supply from device tree
[    0.365075] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_s2-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.365094] s2: supplied by regulator-dummy
[    0.365120] regulator-dummy: could not add device link regulator.4 err -2
[    0.365270] s2: at 2150 mV 
[    0.365624] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_s3-supply from device tree
[    0.365649] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_s3-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.365669] s3: supplied by regulator-dummy
[    0.365694] regulator-dummy: could not add device link regulator.5 err -2
[    0.365830] s3: at 1800 mV 
[    0.366258] s4: Bringing 5100000uV into 5000000-5000000uV
[    0.366333] s4: ramp_delay not set
[    0.366352] s4: 5000 mV 
[    0.366706] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l1_l3-supply from device tree
[    0.366732] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l1_l3-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.366754] l1: supplied by regulator-dummy
[    0.366780] regulator-dummy: could not add device link regulator.7 err -2
[    0.366939] l1: no parameters
[    0.367285] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l2_lvs_1_2_3-supply from device tree
[    0.367311] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l2_lvs_1_2_3-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.367335] l2: supplied by regulator-dummy
[    0.367360] regulator-dummy: could not add device link regulator.8 err -2
[    0.367506] l2: at 1200 mV 
[    0.367840] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l1_l3-supply from device tree
[    0.367866] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l1_l3-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.367891] l3: supplied by regulator-dummy
[    0.367916] regulator-dummy: could not add device link regulator.9 err -2
[    0.368079] l3: at 1200 mV 
[    0.368435] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l4_l11-supply from device tree
[    0.368461] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l4_l11-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.368487] l4: supplied by regulator-dummy
[    0.368512] regulator-dummy: could not add device link regulator.10 err -2
[    0.368664] l4: no parameters
[    0.369005] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l5_l7-supply from device tree
[    0.369031] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l5_l7-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.369058] l5: supplied by regulator-dummy
[    0.369083] regulator-dummy: could not add device link regulator.11 err -2
[    0.369230] l5: at 1740 mV 
[    0.369592] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l6_l12_l14_l15-supply from device tree
[    0.369618] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l6_l12_l14_l15-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.369646] l6: supplied by regulator-dummy
[    0.369671] regulator-dummy: could not add device link regulator.12 err -2
[    0.369818] l6: at 1800 mV 
[    0.370162] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l5_l7-supply from device tree
[    0.370187] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l5_l7-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.370217] l7: supplied by regulator-dummy
[    0.370241] regulator-dummy: could not add device link regulator.13 err -2
[    0.370407] l7: at 1740 mV 
[    0.370757] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l8_l16_l18_19-supply from device tree
[    0.370782] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l8_l16_l18_19-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.370813] l8: supplied by regulator-dummy
[    0.370838] regulator-dummy: could not add device link regulator.14 err -2
[    0.370998] l8: at 1800 mV 
[    0.371343] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l9_l10_l17_l22-supply from device tree
[    0.371370] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l9_l10_l17_l22-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.371402] l9: supplied by regulator-dummy
[    0.371446] regulator-dummy: could not add device link regulator.15 err -2
[    0.371593] l9: at 1800 mV 
[    0.371951] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l9_l10_l17_l22-supply from device tree
[    0.371977] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l9_l10_l17_l22-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.372011] l10: supplied by regulator-dummy
[    0.372036] regulator-dummy: could not add device link regulator.16 err -2
[    0.372199] l10: at 1800 mV 
[    0.372552] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l4_l11-supply from device tree
[    0.372578] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l4_l11-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.372613] l11: supplied by regulator-dummy
[    0.372638] regulator-dummy: could not add device link regulator.17 err -2
[    0.372783] l11: no parameters
[    0.373136] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l6_l12_l14_l15-supply from device tree
[    0.373162] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l6_l12_l14_l15-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.373199] l12: supplied by regulator-dummy
[    0.373223] regulator-dummy: could not add device link regulator.18 err -2
[    0.373367] l12: at 1800 mV 
[    0.373747] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l13_l20_l23_l24-supply from device tree
[    0.373774] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l13_l20_l23_l24-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.373811] l13: supplied by regulator-dummy
[    0.373836] regulator-dummy: could not add device link regulator.19 err -2
[    0.373983] l13: at 2950 mV 
[    0.374352] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l6_l12_l14_l15-supply from device tree
[    0.374378] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l6_l12_l14_l15-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.374417] l14: supplied by regulator-dummy
[    0.374442] regulator-dummy: could not add device link regulator.20 err -2
[    0.374589] l14: at 1900 mV 
[    0.375015] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l6_l12_l14_l15-supply from device tree
[    0.375041] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l6_l12_l14_l15-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.375081] l15: supplied by regulator-dummy
[    0.375106] regulator-dummy: could not add device link regulator.21 err -2
[    0.375266] l15: at 2050 mV 
[    0.375620] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l8_l16_l18_19-supply from device tree
[    0.375645] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l8_l16_l18_19-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.375686] l16: supplied by regulator-dummy
[    0.375711] regulator-dummy: could not add device link regulator.22 err -2
[    0.375858] l16: at 2800 mV 
[    0.376216] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l9_l10_l17_l22-supply from device tree
[    0.376242] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l9_l10_l17_l22-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.376285] l17: supplied by regulator-dummy
[    0.376309] regulator-dummy: could not add device link regulator.23 err -2
[    0.376477] l17: at 2800 mV 
[    0.376831] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l8_l16_l18_19-supply from device tree
[    0.376856] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l8_l16_l18_19-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.376899] l18: supplied by regulator-dummy
[    0.376924] regulator-dummy: could not add device link regulator.24 err -2
[    0.377070] l18: at 2850 mV 
[    0.377434] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l8_l16_l18_19-supply from device tree
[    0.377459] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l8_l16_l18_19-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.377504] l19: supplied by regulator-dummy
[    0.377528] regulator-dummy: could not add device link regulator.25 err -2
[    0.377676] l19: at 3300 mV 
[    0.378057] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l13_l20_l23_l24-supply from device tree
[    0.378084] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l13_l20_l23_l24-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.378130] l20: supplied by regulator-dummy
[    0.378154] regulator-dummy: could not add device link regulator.26 err -2
[    0.378299] l20: at 2950 mV 
[    0.378673] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l21-supply from device tree
[    0.378699] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l21-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.378746] l21: supplied by regulator-dummy
[    0.378771] regulator-dummy: could not add device link regulator.27 err -2
[    0.378919] l21: at 2950 mV 
[    0.379278] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l9_l10_l17_l22-supply from device tree
[    0.379303] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l9_l10_l17_l22-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.379352] l22: supplied by regulator-dummy
[    0.379377] regulator-dummy: could not add device link regulator.28 err -2
[    0.379538] l22: at 3100 mV 
[    0.379908] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l13_l20_l23_l24-supply from device tree
[    0.379934] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l13_l20_l23_l24-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.379983] l23: supplied by regulator-dummy
[    0.380008] regulator-dummy: could not add device link regulator.29 err -2
[    0.380155] l23: at 3000 mV 
[    0.380529] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l13_l20_l23_l24-supply from device tree
[    0.380555] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l13_l20_l23_l24-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.380605] l24: supplied by regulator-dummy
[    0.380630] regulator-dummy: could not add device link regulator.30 err -2
[    0.380790] l24: at 3075 mV 
[    0.381150] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l2_lvs_1_2_3-supply from device tree
[    0.381176] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l2_lvs_1_2_3-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.381229] lvs1: supplied by regulator-dummy
[    0.381253] regulator-dummy: could not add device link regulator.31 err -2
[    0.381368] lvs1: no parameters
[    0.381691] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l2_lvs_1_2_3-supply from device tree
[    0.381717] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l2_lvs_1_2_3-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.381771] lvs2: supplied by regulator-dummy
[    0.381796] regulator-dummy: could not add device link regulator.32 err -2
[    0.381904] lvs2: no parameters
[    0.382238] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l2_lvs_1_2_3-supply from device tree
[    0.382264] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vdd_l2_lvs_1_2_3-supply property in node /soc/spmi@fc4cf000/pm8941@1/regulators failed
[    0.382319] lvs3: supplied by regulator-dummy
[    0.382343] regulator-dummy: could not add device link regulator.33 err -2
[    0.382460] lvs3: no parameters
[    0.383032] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vin_5vs-supply from device tree
[    0.383059] 5vs1: supplied by s4
[    0.383083] s4: could not add device link regulator.34 err -2
[    0.383244] 5vs1: at 5000 mV 
[    0.383638] qcom-spmi-regulator fc4cf000.spmi:pm8941@1:regulators: Looking up vin_5vs-supply from device tree
[    0.383664] 5vs2: supplied by s4
[    0.383689] s4: could not add device link regulator.35 err -2
[    0.383826] 5vs2: at 5000 mV 
[    0.387500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.400624] msm_hsusb f9a55000.usb: Looking up vbus-supply from device tree
[    0.403785] qcom,pwm-vibrator soc:vibrator: Looking up vcc-supply from device tree
[    0.404875] input: pm8941_pwrkey as /devices/platform/soc/fc4cf000.spmi/spmi-0/0-00/fc4cf000.spmi:pm8941@0:pwrkey@800/input/input1
[    0.406168] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: rtc core: registered pm8xxx_rtc as rtc0
[    0.406340] i2c /dev entries driver
[    0.406796] i2c-qcom-cci: probe of fda0c000.qcom,cci failed with error -2
[    0.407115] i2c_qup f9923000.i2c: 
[    0.407115]  tx channel not available
[    0.407840] i2c_qup f9924000.i2c: 
[    0.407840]  tx channel not available
[    0.408483] rmi4_i2c 1-0070: Looking up vdd-supply from device tree
[    0.408522] rmi4_i2c 1-0070: Failed to get supply 'vdd': -517
[    0.408690] i2c_qup f9925000.i2c: 
[    0.408690]  tx channel not available
[    0.409221] cma: cma_alloc(cma (ptrval), count 8, align 3)
[    0.409517] cma: cma_alloc(): returned (ptrval)
[    0.409575] cma: cma_alloc(cma (ptrval), count 8, align 3)
[    0.409600] cma: cma_alloc(): returned (ptrval)
[    0.416056] lm3630a_bl 3-0038: LM3630A backlight register OK.
[    0.416372] i2c_qup f9968000.i2c: 
[    0.416372]  tx channel not available
[    0.417749] qcom-camss fda0ac00.camss: Looking up vdda-supply from device tree
[    0.417789] qcom-camss fda0ac00.camss: could not get regulator
[    0.417802] qcom-camss fda0ac00.camss: Failed to init csid0 sub-device: -517
[    0.418517] cma: cma_alloc(cma (ptrval), count 601, align 8)
[    0.418769] cma: cma_alloc(): returned (ptrval)
[    0.420621] cma: cma_alloc(cma (ptrval), count 1, align 0)
[    0.420718] cma: cma_alloc(): returned (ptrval)
[    0.420789] qcom-venus fdc00000.video-codec: failed to get iommu secure pgtable size (-19)
[    0.421265] qcom_scm_restore_sec_cfg 0
[    0.421440] qcom-venus fdc00000.video-codec: Direct firmware load for venus.mdt failed with error -2
[    0.421518] cma: cma_release(page (ptrval))
[    0.421998] cma: cma_release(page (ptrval))
[    0.422183] qcom-venus: probe of fdc00000.video-codec failed with error -2
[    0.424355] qcom-smbb fc4cf000.spmi:pm8941@0:charger@1000: Initializing SMBB rev 3
[    0.428400] qcom-smbb fc4cf000.spmi:pm8941@0:charger@1000: Looking up usb-otg-in-supply from device tree
[    0.428461] otg-vbus: supplied by 5vs1
[    0.428488] 5vs1: could not add device link regulator.36 err -2
[    0.428633] otg-vbus: at 5000 mV 
[    0.435080] usb_otg_vbus: at 5000 mV 
[    0.435881] spmi-temp-alarm fc4cf000.spmi:pm8841@4:temp-alarm@2400: failed to register sensor
[    0.436283] qcom-tsens fc4a8000.thermal-sensor: tsens calibration failed
[    0.437008] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    0.437022] Bluetooth: HCI UART driver ver 2.3
[    0.437034] Bluetooth: HCI UART protocol H4 registered
[    0.437191] Bluetooth: HCI UART protocol Broadcom registered
[    0.437786] sdhci: Secure Digital Host Controller Interface driver
[    0.437794] sdhci: Copyright(c) Pierre Ossman
[    0.437801] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.438339] sdhci_msm f9824900.sdhci: Looking up vmmc-supply from device tree
[    0.438374] sdhci_msm f9824900.sdhci: Looking up vqmmc-supply from device tree
[    0.439111] sdhci_msm f98a4900.sdhci: Looking up vmmc-supply from device tree
[    0.439198] sdhci_msm f98a4900.sdhci: Looking up vqmmc-supply from device tree
[    0.440715] usbcore: registered new interface driver usbhid
[    0.440734] usbhid: USB HID core driver
[    0.449529] inv-mpu6050-i2c 4-0068: Looking up vddio-supply from device tree
[    0.452481] NET: Registered protocol family 17
[    0.452513] NET: Registered protocol family 15
[    0.452990] Registering SWP/SWPB emulation handler
[    0.453665] Loading compiled-in X.509 certificates
[    0.482211] vreg-boost: 3150 mV 
[    0.482430] reg-fixed-voltage vreg-boost: vreg-boost supplying 3150000uV
[    0.482861] avdd-3p3: 3300 mV 
[    0.483054] reg-fixed-voltage avdd33: avdd-3p3 supplying 3300000uV
[    0.483376] vdd-1p0: 1000 mV 
[    0.483565] reg-fixed-voltage vdd10: vdd-1p0 supplying 1000000uV
[    0.485220] ocmem fdd00000.ocmem: Unable to get the core clock
[    0.488160] msm_dsi_phy fd922a00.dsi-phy: Looking up vddio-supply from device tree
[    0.488204] msm_dsi_phy fd922a00.dsi-phy: Failed to get supply 'vddio': -517
[    0.488219] msm_dsi_phy fd922a00.dsi-phy: dsi_phy_regulator_init: failed to init regulator, ret=-517
[    0.488230] msm_dsi_phy fd922a00.dsi-phy: dsi_phy_driver_probe: failed to init regulator
[    0.488655] msm_hdmi_phy fd922500.hdmi-phy: Looking up core-vdda-supply from device tree
[    0.488697] msm_hdmi_phy fd922500.hdmi-phy: failed to get phy regulator: core-vdda (-517)
[    0.501169] msm_hsusb f9a55000.usb: Looking up vbus-supply from device tree
[    0.501908] qcom_usb_hs_phy ci_hdrc.0.ulpi: Looking up v1p8-supply from device tree
[    0.502493] qcom,pwm-vibrator soc:vibrator: Looking up vcc-supply from device tree
[    0.502758] rmi4_i2c 1-0070: Looking up vdd-supply from device tree
[    0.502800] rmi4_i2c 1-0070: Failed to get supply 'vdd': -517
[    0.503466] qcom-camss fda0ac00.camss: Looking up vdda-supply from device tree
[    0.503507] qcom-camss fda0ac00.camss: could not get regulator
[    0.503520] qcom-camss fda0ac00.camss: Failed to init csid0 sub-device: -517
[    0.504262] spmi-temp-alarm fc4cf000.spmi:pm8941@0:temp-alarm@2400: failed to register sensor
[    0.505705] sdhci_msm f9824900.sdhci: Looking up vmmc-supply from device tree
[    0.505745] sdhci_msm f9824900.sdhci: Looking up vqmmc-supply from device tree
[    0.506541] sdhci_msm f98a4900.sdhci: Looking up vmmc-supply from device tree
[    0.506623] sdhci_msm f98a4900.sdhci: Looking up vqmmc-supply from device tree
[    0.507069] inv-mpu6050-i2c 4-0068: Looking up vddio-supply from device tree
[    0.507324] ocmem fdd00000.ocmem: Unable to get the core clock
[    0.507936] msm_dsi_phy fd922a00.dsi-phy: Looking up vddio-supply from device tree
[    0.507977] msm_dsi_phy fd922a00.dsi-phy: Failed to get supply 'vddio': -517
[    0.507991] msm_dsi_phy fd922a00.dsi-phy: dsi_phy_regulator_init: failed to init regulator, ret=-517
[    0.508002] msm_dsi_phy fd922a00.dsi-phy: dsi_phy_driver_probe: failed to init regulator
[    0.508395] msm_hdmi_phy fd922500.hdmi-phy: Looking up core-vdda-supply from device tree
[    0.508436] msm_hdmi_phy fd922500.hdmi-phy: failed to get phy regulator: core-vdda (-517)
[    0.509065] qcom_usb_hs_phy ci_hdrc.0.ulpi: Looking up v1p8-supply from device tree
[    0.509556] qcom,pwm-vibrator soc:vibrator: Looking up vcc-supply from device tree
[    0.509791] rmi4_i2c 1-0070: Looking up vdd-supply from device tree
[    0.509832] rmi4_i2c 1-0070: Failed to get supply 'vdd': -517
[    0.510447] qcom-camss fda0ac00.camss: Looking up vdda-supply from device tree
[    0.510488] qcom-camss fda0ac00.camss: could not get regulator
[    0.510500] qcom-camss fda0ac00.camss: Failed to init csid0 sub-device: -517
[    0.512979] input: soc:gpio-keys as /devices/platform/soc/soc:gpio-keys/input/input4
[    0.513585] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: setting system clock to 1970-06-02 23:44:49 UTC (13218289)
[    0.513647] Speed bin: 1
[    0.513663] PVS bin: 2
[    0.513677] PVS version: 0
[    0.518990] cpufreq: cpufreq_online: CPU1: Running at unlisted freq: 384000 KHz
[    0.519104] cpufreq: cpufreq_online: CPU1: Unlisted initial frequency changed to: 576000 KHz
[    0.519371] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    0.519837] sdhci_msm f9824900.sdhci: Looking up vmmc-supply from device tree
[    0.519864] sdhci_msm f9824900.sdhci: Looking up vqmmc-supply from device tree
[    0.520374] sdhci_msm f98a4900.sdhci: Looking up vmmc-supply from device tree
[    0.520422] sdhci_msm f98a4900.sdhci: Looking up vqmmc-supply from device tree
[    0.521160] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    0.521554] wl-reg: disabling
[    0.521873] inv-mpu6050-i2c 4-0068: Looking up vddio-supply from device tree
[    0.522036] ocmem fdd00000.ocmem: Unable to get the core clock
[    0.522045] vdd-1p0: disabling
[    0.522071] ALSA device list:
[    0.522076]   No soundcards found.
[    0.522101] Warning: unable to open an initial console.
[    0.522393] msm_dsi_phy fd922a00.dsi-phy: Looking up vddio-supply from device tree
[    0.522416] msm_dsi_phy fd922a00.dsi-phy: Failed to get supply 'vddio': -517
[    0.522424] msm_dsi_phy fd922a00.dsi-phy: dsi_phy_regulator_init: failed to init regulator, ret=-517
[    0.522430] msm_dsi_phy fd922a00.dsi-phy: dsi_phy_driver_probe: failed to init regulator
[    0.522659] msm_hdmi_phy fd922500.hdmi-phy: Looking up core-vdda-supply from device tree
[    0.522683] msm_hdmi_phy fd922500.hdmi-phy: failed to get phy regulator: core-vdda (-517)
[    0.522959] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    0.522969] cfg80211: failed to load regulatory.db
[    0.523365] Freeing unused kernel memory: 1024K
[    0.523531] qcom_usb_hs_phy ci_hdrc.0.ulpi: Looking up v1p8-supply from device tree
[    0.523924] qcom,pwm-vibrator soc:vibrator: Looking up vcc-supply from device tree
[    0.524090] rmi4_i2c 1-0070: Looking up vdd-supply from device tree
[    0.524116] rmi4_i2c 1-0070: Failed to get supply 'vdd': -517
[    0.524546] qcom-camss fda0ac00.camss: Looking up vdda-supply from device tree
[    0.524572] qcom-camss fda0ac00.camss: could not get regulator
[    0.524580] qcom-camss fda0ac00.camss: Failed to init csid0 sub-device: -517
[    0.617050] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s1-supply from device tree
[    0.617059] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s1-supply property in node /smd/rpm/rpm_requests/pm8841-regulators failed
[    0.617102] s1: supplied by regulator-dummy
[    0.617111] regulator-dummy: could not add device link regulator.41 err -2
[    0.617154] s1: Bringing 0uV into 675000-675000uV
[    0.619868] sdhci_msm f9824900.sdhci: Looking up vmmc-supply from device tree
[    0.619897] sdhci_msm f9824900.sdhci: Looking up vqmmc-supply from device tree
[    0.620341] s1: ramp_delay not set
[    0.620353] s1: 675 <--> 1050 mV at 675 mV 
[    0.620419] sdhci_msm f98a4900.sdhci: Looking up vmmc-supply from device tree
[    0.620470] sdhci_msm f98a4900.sdhci: Looking up vqmmc-supply from device tree
[    0.620754] inv-mpu6050-i2c 4-0068: Looking up vddio-supply from device tree
[    0.621089] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s2-supply from device tree
[    0.621096] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s2-supply property in node /smd/rpm/rpm_requests/pm8841-regulators failed
[    0.621124] s2: supplied by regulator-dummy
[    0.621133] regulator-dummy: could not add device link regulator.42 err -2
[    0.621176] s2: Bringing 0uV into 500000-500000uV
[    0.621426] ocmem fdd00000.ocmem: 8 ports, 3 regions, 24 macros, interleaved
[    0.621749] msm_dsi_phy fd922a00.dsi-phy: Looking up vddio-supply from device tree
[    0.621775] msm_dsi_phy fd922a00.dsi-phy: Failed to get supply 'vddio': -517
[    0.621783] msm_dsi_phy fd922a00.dsi-phy: dsi_phy_regulator_init: failed to init regulator, ret=-517
[    0.621789] msm_dsi_phy fd922a00.dsi-phy: dsi_phy_driver_probe: failed to init regulator
[    0.622030] msm_hdmi_phy fd922500.hdmi-phy: Looking up core-vdda-supply from device tree
[    0.622054] msm_hdmi_phy fd922500.hdmi-phy: failed to get phy regulator: core-vdda (-517)
[    0.622449] s2: ramp_delay not set
[    0.622461] s2: 500 <--> 1050 mV at 500 mV 
[    0.622626] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s3-supply from device tree
[    0.622633] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s3-supply property in node /smd/rpm/rpm_requests/pm8841-regulators failed
[    0.622662] s3: supplied by regulator-dummy
[    0.622670] regulator-dummy: could not add device link regulator.43 err -2
[    0.622706] s3: Bringing 0uV into 1050000-1050000uV
[    0.622935] s3: ramp_delay not set
[    0.622944] s3: 1050 mV 
[    0.623089] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s4-supply from device tree
[    0.623097] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s4-supply property in node /smd/rpm/rpm_requests/pm8841-regulators failed
[    0.623124] s4: supplied by regulator-dummy
[    0.623132] regulator-dummy: could not add device link regulator.44 err -2
[    0.623172] s4: Bringing 0uV into 815000-815000uV
[    0.623284] s4: ramp_delay not set
[    0.623296] s4: 815 <--> 900 mV at 815 mV 
[    0.623431] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s5-supply from device tree
[    0.623438] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s5-supply property in node /smd/rpm/rpm_requests/pm8841-regulators failed
[    0.623465] s5: supplied by regulator-dummy
[    0.623473] regulator-dummy: could not add device link regulator.45 err -2
[    0.623508] s5: no parameters
[    0.623658] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s6-supply from device tree
[    0.623665] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s6-supply property in node /smd/rpm/rpm_requests/pm8841-regulators failed
[    0.623692] s6: supplied by regulator-dummy
[    0.623700] regulator-dummy: could not add device link regulator.46 err -2
[    0.623738] s6: no parameters
[    0.623878] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s7-supply from device tree
[    0.623886] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s7-supply property in node /smd/rpm/rpm_requests/pm8841-regulators failed
[    0.623913] s7: supplied by regulator-dummy
[    0.623921] regulator-dummy: could not add device link regulator.47 err -2
[    0.623956] s7: no parameters
[    0.624089] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s8-supply from device tree
[    0.624096] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8841-regulators: Looking up vdd_s8-supply property in node /smd/rpm/rpm_requests/pm8841-regulators failed
[    0.624124] s8: supplied by regulator-dummy
[    0.624132] regulator-dummy: could not add device link regulator.48 err -2
[    0.624166] s8: no parameters
[    0.624449] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_s1-supply from device tree
[    0.624456] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_s1-supply property in node /smd/rpm/rpm_requests/pm8941-regulators failed
[    0.624487] s1: supplied by regulator-dummy
[    0.624495] regulator-dummy: could not add device link regulator.49 err -2
[    0.624536] s1: Bringing 0uV into 1300000-1300000uV
[    0.625653] s1: ramp_delay not set
[    0.625778] s1: 1300 mV 
[    0.625934] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_s2-supply from device tree
[    0.625942] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_s2-supply property in node /smd/rpm/rpm_requests/pm8941-regulators failed
[    0.625974] s2: supplied by regulator-dummy
[    0.625983] regulator-dummy: could not add device link regulator.50 err -2
[    0.626018] s2: Bringing 0uV into 2150000-2150000uV
[    0.626137] s2: ramp_delay not set
[    0.626427] s2: 2150 mV 
[    0.626572] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_s3-supply from device tree
[    0.626579] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_s3-supply property in node /smd/rpm/rpm_requests/pm8941-regulators failed
[    0.626610] s3: supplied by regulator-dummy
[    0.626618] regulator-dummy: could not add device link regulator.51 err -2
[    0.626659] s3: Bringing 0uV into 1800000-1800000uV
[    0.626793] s3: ramp_delay not set
[    0.627096] s3: 1800 mV 
[    0.627257] s4: no parameters
[    0.627403] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l1_l3-supply from device tree
[    0.627429] l1: supplied by s1
[    0.627436] s1: could not add device link regulator.53 err -2
[    0.627471] l1: Bringing 0uV into 1225000-1225000uV
[    0.627602] l1: ramp_delay not set
[    0.627903] l1: 1225 mV 
[    0.628053] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l2_lvs1_2_3-supply from device tree
[    0.628079] l2: supplied by s3
[    0.628086] s3: could not add device link regulator.54 err -2
[    0.628127] l2: Bringing 0uV into 1200000-1200000uV
[    0.628299] l2: ramp_delay not set
[    0.628306] l2: 1200 mV 
[    0.628452] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l1_l3-supply from device tree
[    0.628477] l3: supplied by s1
[    0.628485] s1: could not add device link regulator.55 err -2
[    0.628520] l3: Bringing 0uV into 1225000-1225000uV
[    0.628686] l3: ramp_delay not set
[    0.628693] l3: 1225 mV 
[    0.628834] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l4_l11-supply from device tree
[    0.628859] l4: supplied by s1
[    0.628867] s1: could not add device link regulator.56 err -2
[    0.628909] l4: Bringing 0uV into 1225000-1225000uV
[    0.629084] l4: ramp_delay not set
[    0.629091] l4: 1225 mV 
[    0.629233] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l5_l7-supply from device tree
[    0.629260] l5: supplied by s2
[    0.629268] s2: could not add device link regulator.57 err -2
[    0.629302] l5: Bringing 0uV into 1800000-1800000uV
[    0.629402] l5: ramp_delay not set
[    0.629408] l5: 1800 mV 
[    0.629557] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l6_l12_l14_l15-supply from device tree
[    0.629582] l6: supplied by s2
[    0.629590] s2: could not add device link regulator.58 err -2
[    0.629625] l6: Bringing 0uV into 1800000-1800000uV
[    0.629738] l6: ramp_delay not set
[    0.630104] l6: 1800 mV 
[    0.630271] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l5_l7-supply from device tree
[    0.630296] l7: supplied by s2
[    0.630305] s2: could not add device link regulator.59 err -2
[    0.630342] l7: Bringing 0uV into 1800000-1800000uV
[    0.630471] l7: ramp_delay not set
[    0.631337] qcom_usb_hs_phy ci_hdrc.0.ulpi: Looking up v1p8-supply from device tree
[    0.631408] qcom_usb_hs_phy ci_hdrc.0.ulpi: Looking up v3p3-supply from device tree
[    0.631877] qcom,pwm-vibrator soc:vibrator: Looking up vcc-supply from device tree
[    0.632046] rmi4_i2c 1-0070: Looking up vdd-supply from device tree
[    0.632076] rmi4_i2c 1-0070: Failed to get supply 'vdd': -517
[    0.632522] qcom-camss fda0ac00.camss: Looking up vdda-supply from device tree
[    0.632558] qcom-camss fda0ac00.camss: could not get regulator
[    0.632566] qcom-camss fda0ac00.camss: Failed to init csid0 sub-device: -517
[    0.633165] l7: 1800 mV 
[    0.633335] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l8_l16_l18_l19-supply from device tree
[    0.633344] l8: supplied by vph-pwr
[    0.633352] vph-pwr: could not add device link regulator.60 err -2
[    0.633395] l8: Bringing 0uV into 1800000-1800000uV
[    0.633537] l8: ramp_delay not set
[    0.633547] l8: 1800 mV 
[    0.633716] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l9_l10_l17_l22-supply from device tree
[    0.633739] l9: supplied by vreg-boost
[    0.633747] vreg-boost: could not add device link regulator.61 err -2
[    0.633793] l9: Bringing 0uV into 1800000-1800000uV
[    0.633981] l9: ramp_delay not set
[    0.633994] l9: 1800 <--> 2950 mV at 1800 mV 
[    0.634160] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l9_l10_l17_l22-supply from device tree
[    0.634181] l10: supplied by vreg-boost
[    0.634189] vreg-boost: could not add device link regulator.62 err -2
[    0.634226] l10: Bringing 0uV into 1800000-1800000uV
[    0.634403] l10: ramp_delay not set
[    0.634413] l10: 1800 <--> 2950 mV at 1800 mV 
[    0.634583] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l4_l11-supply from device tree
[    0.634653] l11: supplied by s1
[    0.634662] s1: could not add device link regulator.63 err -2
[    0.634700] l11: Bringing 0uV into 1300000-1300000uV
[    0.634871] l11: ramp_delay not set
[    0.634878] l11: 1300 mV 
[    0.635044] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l6_l12_l14_l15-supply from device tree
[    0.635071] l12: supplied by s2
[    0.635080] s2: could not add device link regulator.64 err -2
[    0.635114] l12: Bringing 0uV into 1800000-1800000uV
[    0.635233] l12: ramp_delay not set
[    0.635533] l12: 1800 mV 
[    0.635713] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l13_l20_l23_l24-supply from device tree
[    0.635735] l13: supplied by vreg-boost
[    0.635744] vreg-boost: could not add device link regulator.65 err -2
[    0.635787] l13: Bringing 0uV into 1800000-1800000uV
[    0.635954] l13: ramp_delay not set
[    0.636297] l13: 1800 <--> 2950 mV at 1800 mV 
[    0.636455] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l6_l12_l14_l15-supply from device tree
[    0.636481] l14: supplied by s2
[    0.636489] s2: could not add device link regulator.66 err -2
[    0.636523] l14: Bringing 0uV into 1800000-1800000uV
[    0.636695] l14: ramp_delay not set
[    0.636704] l14: 1800 mV 
[    0.636890] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l6_l12_l14_l15-supply from device tree
[    0.636919] l15: supplied by s2
[    0.636934] s2: could not add device link regulator.67 err -2
[    0.636986] l15: Bringing 0uV into 2050000-2050000uV
[    0.637175] l15: ramp_delay not set
[    0.637185] l15: 2050 mV 
[    0.637370] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l8_l16_l18_l19-supply from device tree
[    0.637381] l16: supplied by vph-pwr
[    0.637390] vph-pwr: could not add device link regulator.68 err -2
[    0.637436] l16: Bringing 0uV into 2700000-2700000uV
[    0.637581] l16: ramp_delay not set
[    0.637594] l16: 2700 mV 
[    0.637761] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l9_l10_l17_l22-supply from device tree
[    0.637783] l17: supplied by vreg-boost
[    0.637790] vreg-boost: could not add device link regulator.69 err -2
[    0.637825] l17: Bringing 0uV into 2850000-2850000uV
[    0.639194] l17: ramp_delay not set
[    0.639203] l17: 2850 mV 
[    0.639378] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l8_l16_l18_l19-supply from device tree
[    0.639388] l18: supplied by vph-pwr
[    0.639397] vph-pwr: could not add device link regulator.70 err -2
[    0.639435] l18: Bringing 0uV into 2850000-2850000uV
[    0.640805] l18: ramp_delay not set
[    0.640815] l18: 2850 mV 
[    0.641011] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l8_l16_l18_l19-supply from device tree
[    0.641021] l19: supplied by vph-pwr
[    0.641037] vph-pwr: could not add device link regulator.71 err -2
[    0.641081] l19: Bringing 0uV into 3000000-3000000uV
[    0.642500] l19: ramp_delay not set
[    0.642515] l19: 3000 <--> 3300 mV at 3000 mV 
[    0.642728] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l13_l20_l23_l24-supply from device tree
[    0.642749] l20: supplied by vreg-boost
[    0.642757] vreg-boost: could not add device link regulator.72 err -2
[    0.642791] l20: Bringing 0uV into 2950000-2950000uV
[    0.644178] l20: ramp_delay not set
[    0.645484] l20: 2950 mV 
[    0.645695] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l21-supply from device tree
[    0.645721] l21: supplied by vreg-boost
[    0.645731] vreg-boost: could not add device link regulator.73 err -2
[    0.645772] l21: Bringing 0uV into 2950000-2950000uV
[    0.646209] sdhci_msm f9824900.sdhci: Looking up vmmc-supply from device tree
[    0.646287] sdhci_msm f9824900.sdhci: Looking up vqmmc-supply from device tree
[    0.646401] cma: cma_alloc(cma (ptrval), count 1, align 0)
[    0.647494] l21: ramp_delay not set
[    0.647697] cma: cma_alloc(): returned (ptrval)
[    0.649090] l21: 2950 mV 
[    0.649310] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l9_l10_l17_l22-supply from device tree
[    0.649337] l22: supplied by vreg-boost
[    0.649347] vreg-boost: could not add device link regulator.74 err -2
[    0.649390] l22: Bringing 0uV into 3000000-3000000uV
[    0.650743] l22: ramp_delay not set
[    0.650756] l22: 3000 <--> 3300 mV at 3000 mV 
[    0.650984] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l13_l20_l23_l24-supply from device tree
[    0.651006] l23: supplied by vreg-boost
[    0.651014] vreg-boost: could not add device link regulator.75 err -2
[    0.651055] l23: Bringing 0uV into 3000000-3000000uV
[    0.652439] l23: ramp_delay not set
[    0.652448] l23: 3000 mV 
[    0.652646] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l13_l20_l23_l24-supply from device tree
[    0.652673] l24: supplied by vreg-boost
[    0.652686] vreg-boost: could not add device link regulator.76 err -2
[    0.652736] l24: Bringing 0uV into 3075000-3075000uV
[    0.654391] l24: ramp_delay not set
[    0.655877] l24: 3075 mV 
[    0.656102] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l2_lvs1_2_3-supply from device tree
[    0.656129] lvs1: supplied by s3
[    0.656138] s3: could not add device link regulator.77 err -2
[    0.656178] lvs1: 1800 mV 
[    0.656248] mmc0: Switching to 3.3V signalling voltage failed
[    0.656431] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l2_lvs1_2_3-supply from device tree
[    0.656457] lvs2: supplied by s3
[    0.656465] s3: could not add device link regulator.78 err -2
[    0.656507] lvs2: at 1800 mV 
[    0.656677] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vdd_l2_lvs1_2_3-supply from device tree
[    0.656704] lvs3: supplied by s3
[    0.656712] s3: could not add device link regulator.79 err -2
[    0.656748] lvs3: at 1800 mV 
[    0.656913] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vin_5vs-supply from device tree
[    0.656922] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vin_5vs-supply property in node /smd/rpm/rpm_requests/pm8941-regulators failed
[    0.656979] 5vs1: supplied by regulator-dummy
[    0.656987] regulator-dummy: could not add device link regulator.80 err -2
[    0.657022] 5vs1: no parameters
[    0.657194] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vin_5vs-supply from device tree
[    0.657203] qcom_rpm_smd_regulator smd:rpm:rpm_requests:pm8941-regulators: Looking up vin_5vs-supply property in node /smd/rpm/rpm_requests/pm8941-regulators failed
[    0.657247] 5vs2: supplied by regulator-dummy
[    0.657256] regulator-dummy: could not add device link regulator.81 err -2
[    0.657290] 5vs2: no parameters
[    0.666986] Bluetooth: hci0: BCM: chip id 86
[    0.667632] Bluetooth: hci0: BCM: features 0x2f
[    0.669236] Bluetooth: hci0: BCM4335C0
[    0.669248] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0000
[    0.669301] bluetooth hci0: Direct firmware load for brcm/BCM4335C0.hcd failed with error -2
[    0.669310] Bluetooth: hci0: BCM: Patch brcm/BCM4335C0.hcd not found
[    0.675615] random: fast init done
[    0.681548] mmc0: SDHCI controller on f9824900.sdhci [f9824900.sdhci] using ADMA
[    0.682280] sdhci_msm f98a4900.sdhci: Looking up vmmc-supply from device tree
[    0.682350] sdhci_msm f98a4900.sdhci: Looking up vqmmc-supply from device tree
[    0.682431] cma: cma_alloc(cma (ptrval), count 1, align 0)
[    0.682722] cma: cma_alloc(): returned (ptrval)
[    0.685068] mmc1: Switching to 3.3V signalling voltage failed
[    0.707828] mmc1: SDHCI controller on f98a4900.sdhci [f98a4900.sdhci] using ADMA
[    0.708011] inv-mpu6050-i2c 4-0068: Looking up vddio-supply from device tree
[    0.724131] mmc0: new high speed MMC card at address 0001
[    0.724514] mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
[    0.724837] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
[    0.725090] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
[    0.725308] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (244:0)
[    0.729355]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
[    0.746623] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    0.804644] inv-mpu6050-i2c 4-0068: mounting matrix not found: using identity...
[    0.805081] inv-mpu6050-i2c 4-0068: whoami mismatch got 0x74 (MPU6515)expected 0x73 (MPU9255)
[    0.950640] ak8975 5-000f: mounting matrix not found: using identity...
[    0.950652] ak8975 5-000f: Looking up vdd-supply from device tree
[    0.950738] ak8975 5-000f: Looking up vid-supply from device tree
[    0.997031] bmp280 5-0076: Looking up vddd-supply from device tree
[    0.997113] bmp280 5-0076: Looking up vdda-supply from device tree
[    1.316224] i2c i2c-4: Added multiplexed i2c bus 5
[    1.316662] msm_dsi_phy fd922a00.dsi-phy: Looking up vddio-supply from device tree
[    1.317942] msm_hdmi_phy fd922500.hdmi-phy: Looking up core-vdda-supply from device tree
[    1.318028] msm_hdmi_phy fd922500.hdmi-phy: Looking up vddio-supply from device tree
[    1.318037] msm_hdmi_phy fd922500.hdmi-phy: Looking up vddio-supply property in node /soc/mdss@fd900000/hdmi-phy@fd922500 failed
[    1.318119] msm_hdmi_phy fd922500.hdmi-phy: fd922500.hdmi-phy supply vddio not found, using dummy regulator
[    1.322273] qcom_usb_hs_phy ci_hdrc.0.ulpi: Looking up v1p8-supply from device tree
[    1.322353] qcom_usb_hs_phy ci_hdrc.0.ulpi: Looking up v3p3-supply from device tree
[    1.322442] phy phy-ci_hdrc.0.ulpi.0: Looking up phy-supply from device tree
[    1.322450] phy phy-ci_hdrc.0.ulpi.0: Looking up phy-supply property in node /soc/usb@f9a55000/ulpi/phy@a failed
[    1.322649] cma: cma_alloc(cma (ptrval), count 1, align 0)
[    1.322869] cma: cma_alloc(): returned (ptrval)
[    1.326300] qcom,pwm-vibrator soc:vibrator: Looking up vcc-supply from device tree
[    1.326513] input: pwm-vibrator as /devices/platform/soc/soc:vibrator/input/input7
[    1.326752] rmi4_i2c 1-0070: Looking up vdd-supply from device tree
[    1.326829] rmi4_i2c 1-0070: Looking up vio-supply from device tree
[    1.344788] rmi4_i2c 1-0070: registering I2C-connected sensor
[    1.453506] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: PLG218, fw id: 1645771
[    1.462525] input: Synaptics PLG218 as /devices/rmi4-00/input/input8
[    1.464094] qcom-camss fda0ac00.camss: Looking up vdda-supply from device tree
[    1.464293] qcom-camss fda0ac00.camss: Looking up vdda-supply from device tree
[    1.464333] l12: could not add device link fda0ac00.camss err -17
[    1.464340] l12: Failed to create debugfs directory
[    1.464461] qcom-camss fda0ac00.camss: Looking up vdda-supply from device tree
[    1.464504] l12: could not add device link fda0ac00.camss err -17
[    1.464512] l12: Failed to create debugfs directory
[    1.464692] qcom-camss fda0ac00.camss: Looking up vdda-supply from device tree
[    1.464733] l12: could not add device link fda0ac00.camss err -17
[    1.464739] l12: Failed to create debugfs directory
[    1.465941] msm fd900000.mdss: Looking up vdd-supply from device tree
[    1.465953] msm fd900000.mdss: Looking up vdd-supply property in node /soc/mdss@fd900000 failed
[    1.466029] msm fd900000.mdss: fd900000.mdss supply vdd not found, using dummy regulator
[    1.828448] using random self ethernet address
[    1.828458] using random host ethernet address
[    1.836486] usb0: HOST MAC c6:c5:ea:28:f4:cf
[    1.836517] usb0: MAC 36:49:e0:49:ad:f8
[    1.836642] l24: voltage operation not allowed
[    2.236993] configfs-gadget gadget: high-speed config #1: c
[   10.957326] [drm] using 778m VRAM carveout
[   10.957339] cma: cma_alloc(cma (ptrval), count 199168, align 8)
[   10.969775] cma: cma_alloc(): returned (ptrval)
[   11.378145] msm fd900000.mdss: VRAM: 40100000->70b00000
[   11.378321] msm_mdp fd900100.mdp: MDP5 version v1.2
[   11.378343] msm fd900000.mdss: bound fd900100.mdp (ops 0xc0847554)
[   11.378445] hdmi_msm fd922100.hdmi-tx: Looking up hpd-gdsc-supply from device tree
[   11.378455] hdmi_msm fd922100.hdmi-tx: Looking up hpd-gdsc-supply property in node /soc/mdss@fd900000/hdmi-tx@fd922100 failed
[   11.378537] hdmi_msm fd922100.hdmi-tx: fd922100.hdmi-tx supply hpd-gdsc not found, using dummy regulator
[   11.378606] hdmi_msm fd922100.hdmi-tx: Looking up hpd-5v-supply from device tree
[   11.378687] hdmi_msm fd922100.hdmi-tx: Looking up core-vdda-supply from device tree
[   11.378762] hdmi_msm fd922100.hdmi-tx: Looking up core-vcc-supply from device tree
[   11.379411] msm fd900000.mdss: bound fd922100.hdmi-tx (ops 0xc0844830)
[   11.379452] msm_dsi fd922800.dsi: Looking up gdsc-supply from device tree
[   11.379459] msm_dsi fd922800.dsi: Looking up gdsc-supply property in node /soc/mdss@fd900000/dsi@fd922800 failed
[   11.379508] msm_dsi fd922800.dsi: fd922800.dsi supply gdsc not found, using dummy regulator
[   11.379647] msm_dsi fd922800.dsi: Looking up gdsc-supply from device tree
[   11.379655] msm_dsi fd922800.dsi: Looking up gdsc-supply property in node /soc/mdss@fd900000/dsi@fd922800 failed
[   11.379707] msm_dsi fd922800.dsi: fd922800.dsi supply gdsc not found, using dummy regulator
[   11.379772] msm_dsi fd922800.dsi: Looking up vdd-supply from device tree
[   11.379853] msm_dsi fd922800.dsi: Looking up vdda-supply from device tree
[   11.379916] msm_dsi fd922800.dsi: Looking up vddio-supply from device tree
[   11.380321] panel-simple-dsi fd922800.dsi.0: Looking up power-supply from device tree
[   11.380328] panel-simple-dsi fd922800.dsi.0: Looking up power-supply property in node /soc/mdss@fd900000/dsi@fd922800/panel@0 failed
[   11.380376] panel-simple-dsi fd922800.dsi.0: fd922800.dsi.0 supply power not found, using dummy regulator
[   11.380497] msm fd900000.mdss: bound fd922800.dsi (ops 0xc0849210)
[   11.380713] adreno fdb00000.adreno: Looking up vdd-supply from device tree
[   11.380719] adreno fdb00000.adreno: Looking up vdd-supply property in node /soc/adreno@fdb00000 failed
[   11.380770] adreno fdb00000.adreno: fdb00000.adreno supply vdd not found, using dummy regulator
[   11.380820] adreno fdb00000.adreno: Looking up vddcx-supply from device tree
[   11.380827] adreno fdb00000.adreno: Looking up vddcx-supply property in node /soc/adreno@fdb00000 failed
[   11.380874] adreno fdb00000.adreno: fdb00000.adreno supply vddcx not found, using dummy regulator
[   11.380935] msm fd900000.mdss: A330: no IOMMU, fallback to VRAM carveout!
[   11.381097] msm fd900000.mdss: No memory protection without IOMMU
[   11.381115] msm fd900000.mdss: bound fdb00000.adreno (ops 0xc0842f04)
[   11.397205] msm_mdp fd900100.mdp: no iommu, fallback to phys contig buffers for scanout
[   11.397223] msm fd900000.mdss: fall back to the other CTL category for INTF 1!
[   11.514767] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.514774] [drm] No driver support for vblank timestamp query.
[   11.515394] [drm] Initialized msm 1.3.0 20130625 for fd900000.mdss on minor 0
[   11.604622] msm fd900000.mdss: pp done time out, lm=0
[   11.627844] Console: switching to colour frame buffer device 135x120
[   11.684621] msm fd900000.mdss: pp done time out, lm=0
[   11.711675] msm fd900000.mdss: fb0: msm frame buffer device
[   12.794621] msm fd900000.mdss: pp done time out, lm=0