Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
Hammerhead on mainline 4.12.0-rc3
welcome to hammerhead bootloader
[10] Power on reason 91
[10] DDR: hynix
[110] Loaded IMGDATA at 0x11000000
[110] Display Init: Start
[190] MDP GDSC already enabled
[190] bpp 24
[230] Config MIPI_CMD_PANEL.
[230] display panel: ORISE
[230] display panel: Default setting
[360] Turn on MIPI_CMD_PANEL.
[410] Display Init: Done
[410] cable type from shared memory: 8
[410] vibe
[610] USB init ept @ 0xf96b000
[630] secured device: 1
[630] fastboot_init()
[680] splash: fastboot_op
FASTBOOT MODE
PRODUCT_NAME - hammerhead
VARIANT - hammerhead D821(H) 16GB
HW VERSION - rev_11
BOOTLOADER VERSION - HHZ20h
BASEBAND VERSION - M8974A-2.0.50.2.30
CARRIER INFO - None
SERIAL NUMBER - 02c790c20937bd48
SIGNING - production
SECURE BOOT - enabled
LOCK STATE - unlocked
[790] splash: start
[1820] Fastboot mode started
[1820] udc_start()
[2150] -- reset --
[2150] -- portchange --
[2240] -- reset --
[2240] -- portchange --
[2350] fastboot: processing commands
[4390] fastboot: getvar:slot-count
[4490] fastboot: getvar:slot-suffixes
[4590] fastboot: download:008c9800
downloading...
[5090] fastboot: boot
[5100] Found Appeneded Flattened Device tree
[5100] DTB: not supported
[5100] DTB: Use the first DTB (not found proper DTB)
[5110] get_display_kcal = 0, 0, 0, x
[5150] vibe
[5250] splash: boot
[5290] splash: unlocked
[5330] cmdline: uart_console=enable gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 androidboot.laf androidboot.emmc=true fastboot=true androidboot.serialno=02c790c20937bd48 androidboot.bootloader=HHZ20h androidboot.baseband=msm androidboot.hardware.sku=D821 android[5350] Updating device tree: start
[5350] Updating device tree: done
[5350] booting linux @ 0x8000, ramdisk @ 0x2900000 (3649087), tags/device tree @ 0x2700000
[5360] Turn off MIPI_CMD_PANEL.
[5360] Continuous splash enabled, keeping panel alive.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.12.0-rc3 (user@zenbook) (gcc version 6.3.0 (Alpine 6.3.0) ) #5-Alpine SMP PREEMPT Fri Jun 9 16:21:01 GMT 2017
[ 0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: LGE MSM 8974 HAMMERHEAD
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] percpu: Embedded 17 pages/cpu @eef9e000 s39308 r8192 d22132 u69632
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 490240
[ 0.000000] Kernel command line: uart_console=enable gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 androidboot.laf androidboot.emmc=true fastboot=true androidboot.serialno=02c790c20937bd48 androidboot.bootloader=HHZ20h androidboot.baseband=msm androidboot.hardware.sku=D821 androidboot.hardware.ddr=hynix androidboot.hardware.display=orise androidboot.revision=11
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1933656K/1967104K available (7168K kernel code, 691K rwdata, 2936K rodata, 1024K init, 274K bss, 33448K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0a00000 (8160 kB)
[ 0.000000] .init : 0xc0e00000 - 0xc0f00000 (1024 kB)
[ 0.000000] .data : 0xc0f00000 - 0xc0facc08 ( 692 kB)
[ 0.000000] .bss : 0xc0fb45f4 - 0xc0ff8e28 ( 275 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at /home/user/build/src/linux-ea094f3c830a67f252677aacba5d04ebcf55c4d9/mm/vmalloc.c:1514 arch_timer_mem_of_init+0x260/0x458
[ 0.000000] Trying to vfree() nonexistent vm area (ee821000)
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.12.0-rc3 #5-Alpine
[ 0.000000] Hardware name: Generic DT based system
[ 0.000000] [<c0310154>] (unwind_backtrace) from [<c030c4b0>] (show_stack+0x10/0x14)
[ 0.000000] [<c030c4b0>] (show_stack) from [<c05f5b30>] (dump_stack+0x70/0x8c)
[ 0.000000] [<c05f5b30>] (dump_stack) from [<c031e0d4>] (__warn+0xd8/0x104)
[ 0.000000] [<c031e0d4>] (__warn) from [<c031e138>] (warn_slowpath_fmt+0x38/0x48)
[ 0.000000] [<c031e138>] (warn_slowpath_fmt) from [<c0e37080>] (arch_timer_mem_of_init+0x260/0x458)
[ 0.000000] [<c0e37080>] (arch_timer_mem_of_init) from [<c0e365f0>] (clocksource_probe+0x50/0xac)
[ 0.000000] [<c0e365f0>] (clocksource_probe) from [<c0e00b18>] (start_kernel+0x218/0x38c)
[ 0.000000] [<c0e00b18>] (start_kernel) from [<0020807c>] (0x20807c)
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000016] Switching to timer-based delay loop, resolution 52ns
[ 0.000309] Console: colour dummy device 80x30
[ 0.001024] console [tty0] enabled
[ 0.001054] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.001094] pid_max: default: 32768 minimum: 301
[ 0.001207] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001235] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001734] CPU: Testing write buffer coherency: ok
[ 0.001972] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.039704] Setting up static identity map for 0x300000 - 0x300060
[ 0.119836] smp: Bringing up secondary CPUs ...
[ 0.200259] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.280430] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.360598] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.360749] smp: Brought up 1 node, 4 CPUs
[ 0.360821] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.360844] CPU: All CPU(s) started in SVC mode.
[ 0.362152] devtmpfs: initialized
[ 0.369870] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 0
[ 0.370134] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.370177] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.370404] pinctrl core: initialized pinctrl subsystem
[ 0.371301] NET: Registered protocol family 16
[ 0.371708] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.373055] cpuidle: using governor menu
[ 0.373553] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.373587] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.374758] irq: no irq domain found for /smp2p-adsp/slave-kernel !
[ 0.402821] reg-fixed-voltage vreg-boost: could not find pctldev for node /soc/spmi@fc4cf000/pm8941@0/gpios@c000/boost-bypass, deferring probe
[ 0.403489] vgaarb: loaded
[ 0.403935] SCSI subsystem initialized
[ 0.404386] usbcore: registered new interface driver usbfs
[ 0.404471] usbcore: registered new interface driver hub
[ 0.404583] usbcore: registered new device driver usb
[ 0.405452] Advanced Linux Sound Architecture Driver Initialized.
[ 0.406866] clocksource: Switched to clocksource arch_sys_counter
[ 0.474399] NET: Registered protocol family 2
[ 0.474840] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.474909] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.475002] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.475100] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.475140] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.475305] NET: Registered protocol family 1
[ 0.475723] RPC: Registered named UNIX socket transport module.
[ 0.475750] RPC: Registered udp transport module.
[ 0.475771] RPC: Registered tcp transport module.
[ 0.475792] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.476070] Trying to unpack rootfs image as initramfs...
[ 0.667946] Freeing initrd memory: 3564K
[ 0.668728] hw perfevents: enabled with armv7_krait PMU driver, 5 counters available
[ 0.670450] workingset: timestamp_bits=30 max_order=19 bucket_order=0
[ 0.676847] NFS: Registering the id_resolver key type
[ 0.676992] Key type id_resolver registered
[ 0.677015] Key type id_legacy registered
[ 0.677587] jffs2: version 2.2. (NAND) \A9 2001-2006 Red Hat, Inc.
[ 0.677944] fuse init (API version 7.26)
[ 0.679977] bounce: pool size: 64 pages
[ 0.680037] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.680071] io scheduler noop registered
[ 0.680092] io scheduler deadline registered
[ 0.680141] io scheduler cfq registered (default)
[ 0.680165] io scheduler mq-deadline registered
[ 0.680188] io scheduler kyber registered
[ 0.701175] msm_serial f991d000.serial: msm_serial: detected port #0
[ 0.701250] msm_serial f991d000.serial: uartclk = 7372800
[ 0.701316] f991d000.serial: ttyMSM0 at MMIO 0xf991d000 (irq =c27, base_baud = 460800) is a MSM
[ 0.701366] msm_serial: console setup on port #0
[ 1.409149] console [ttyMSM0] enabled
[ 1.414288] msm_serial: driver initialized
[ 1.461751] brd: module loaded
[ 1.490984] loop: module loaded
[ 1.491353] SCSI Media Changer driver v0.25
[ 1.493688] spmi spmi-0: PMIC Arb Version-1 (0x20000002)
[ 1.512665] libphy: Fixed MDIO Bus: probed
[ 1.512933] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1.515675] CSLIP: code copyright 1989 Regents of the University of California.
[ 1.525450] usbcore: registered new interface driver ax88179_178a
[ 1.532581] usbcore: registered new interface driver cdc_ether
[ 1.538825] usbcore: registered new interface driver net1080
[ 1.544524] usbcore: registered new interface driver cdc_subset
[ 1.550389] usbcore: registered new interface driver cdc_ncm
[ 1.556314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.561887] ehci-pci: EHCI PCI platform driver
[ 1.568246] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 1.572790] usbcore: registered new interface driver cdc_acm
[ 1.578098] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.584075] usbcore: registered new interface driver usbserial
[ 1.593833] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: rtc core: registered pm8xxx_rtc as rtc0
[ 1.597780] i2c /dev entries driver
[ 1.606745] qcom-smbb fc4cf000.spmi:pm8941@0:charger@1000: Initializing SMBB rev 3
[ 1.612781] otg-vbus: supplied by regulator-dummy
[ 1.617955] qcom-tsens fc4a8000.thermal-sensor: tsens calibration failed
[ 1.622856] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.629077] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
[ 1.637445] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
[ 1.644421] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
[ 1.651747] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
[ 1.659364] sdhci: Secure Digital Host Controller Interface driver
[ 1.666182] sdhci: Copyright(c) Pierre Ossman
[ 1.672454] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.678295] usbcore: registered new interface driver usbhid
[ 1.682589] usbhid: USB HID core driver
[ 1.689612] oprofile: using timer interrupt.
[ 1.691899] NET: Registered protocol family 17
[ 1.696276] Key type dns_resolver registered
[ 1.700787] Registering SWP/SWPB emulation handler
[ 1.726604] input: soc:gpio-keys as /devices/platform/soc/soc:gpio-keys/input/input0
[ 1.728106] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: setting system clock to 1970-01-03 00:25:13 UTC (174313)
[ 1.734154] ALSA devi[ 1.747758] Freeing unused kernel memory: 1024K
modprobe: module ext4 not found in modules.dep
/etc/postmarketos-mkinitfs/hooks/00-device-lg-hammerhead.sh: line 4: can't create /sys/class/graphics/fb0/mode: nonexistent directory
ifconfig: SIOCSIFADDR: No such device
ifconfig: SIOCSIFADDR: No such device
fbsplash: can't open '/dev/fb0': No such file or directory
Device /dev/mmcblk* doesn't exist or access denied.
Could not find cryptsetup partition.
Maybe you need to insert the sdcard, if your device has
any? Trying again in one second...
Device /dev/mmcblk* doesn't exist or access denied.
Could not find cryptsetup partition.
Maybe you need to insert the sdcard, if your device has
any? Trying again in one second...
Device /dev/mmcblk* doesn't exist or access denied.
Could not find cryptsetup partition.
Maybe you need to insert the sdcard, if your device has
any? Trying again in one second...
Device /dev/mmcblk* doesn't exist or access denied.
Could not find cryptsetup partition.
Maybe you need to insert the sdcard, if your device has
any? Trying again in one second...
Device /dev/mmcblk* doesn't exist or access denied.
Could not find cryptsetup partition.
Maybe you need to insert the sdcard, if your device has
any? Trying again in one second...
Device /dev/mmcblk* doesn't exist or access denied.
Could not find cryptsetup partition.
Maybe you need to insert the sdcard, if your device has
any? Trying again in one second...
Device /dev/mmcblk* doesn't exist or access denied.
Could not find cryptsetup partition.
Maybe you need to insert the sdcard, if your device has
any? Trying again in one second...
Device /dev/mmcblk* doesn't exist or access denied.
Could not find cryptsetup partition.
Maybe you need to insert the sdcard, if your device has
any? Trying again in one second...
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.