OrionReed

// 3D Dom viewer, copy-paste this into your console to visualise the DOM as a stack of solid blocks.
// You can also minify and save it as a bookmarklet (https://www.freecodecamp.org/news/what-are-bookmarklets/)
(() => {
  const SHOW_SIDES = false; // color sides of DOM nodes?
  const COLOR_SURFACE = true; // color tops of DOM nodes?
  const COLOR_RANDOM = false; // randomise color?
  const COLOR_HUE = 190; // hue in HSL (https://hslpicker.com)
  const MAX_ROTATION = 180; // set to 360 to rotate all the way round
  const THICKNESS = 20; // thickness of layers
  const DISTANCE = 10000; // ¯\\_(ツ)_/¯

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int