Last active
March 9, 2020 12:02
-
-
Save MichaelHabib/1f1131b5f8908c000b0efa303dc266e0 to your computer and use it in GitHub Desktop.
devilbox .env file in relation to postgre db issue
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ### | |
| ### --------------------------------------------------- | |
| ### D E V I L B O X R U N - T I M E S E T T I N G S | |
| ### --------------------------------------------------- | |
| ### | |
| ### All the following settings are applied during | |
| ### $ docker-compose up | |
| ### | |
| ### No need to rebuild any docker images! | |
| ### | |
| ### IMPORTANT: | |
| ### ---------- | |
| ### When changing any values ensure to stop, rm and restart: | |
| ### $ docker-compose stop | |
| ### $ docker-compose rm -f | |
| ### $ docker-compose up | |
| ### | |
| ### NOTE: | |
| ### ----- | |
| ### For you own custom variables, scroll to the bottom | |
| ### | |
| # The following line will disable any shellcheck warnings throughout this file | |
| # shellcheck disable=SC2034,SC2125 | |
| ### | |
| ### Show all executed commands in each | |
| ### docker image during docker-compose up? | |
| ### | |
| ### 0: Quiet | |
| ### 1: Verbose | |
| ### 2: More verbose | |
| DEBUG_COMPOSE_ENTRYPOINT=2 | |
| ### | |
| ### Log to file or Docker logs. | |
| ### | |
| ### Logging to file means log files are available under log/ | |
| ### on your host operating system. | |
| ### Logging to Docker logs means log files are streamed to | |
| ### stdout and stderr. | |
| ### | |
| ### 1: Log to Docker logs | |
| ### 0: Log to file | |
| ### | |
| DOCKER_LOGS=0 | |
| ### | |
| ### Relative or absolute path to the devilbox repository. | |
| ### (Used as a prefix for all mount paths) | |
| ### There is no need to change this. | |
| ### | |
| ### The only exception is for OSX users wanting to use NFS | |
| ### mounts instead of Filesystem mounts due to degraded performance | |
| ### on OSX. | |
| ### | |
| ### Note: When changing this variable you must re-create the container. | |
| ### Simply remove it, it will be auto-created during the next start: | |
| ### | |
| ### $ docker-compose rm -f | |
| ### | |
| DEVILBOX_PATH=. | |
| ### | |
| ### At what IP address should the docker services listen | |
| ### on the Host computer? | |
| ### | |
| ### The specified default should be fine for Linux and OSX (127.0.0.1:). | |
| ### If you are on windows, you will probably have to change | |
| ### it to the IP address of the docker machine. | |
| ### | |
| ### a.) Leave blank, to listen on all interfaces (no trailing colon ':') | |
| ### LOCAL_LISTEN_ADDR= | |
| ### b.) If an IP is specified, note the trailing colon ':' | |
| ### LOCAL_LISTEN_ADDR=127.0.0.1: | |
| ### | |
| LOCAL_LISTEN_ADDR= | |
| ### | |
| ### This is the domain suffix your projects will be made available | |
| ### with mass-virtual-hosting. | |
| ### It is also required for the internal DNS server to be setup. | |
| ### | |
| ### Note: Only ALPHA ([a-zA-Z]+) characters are supported. | |
| ### | |
| ### Example: | |
| ### TLD_SUFFIX=loc | |
| ### Makes your project available under xxxx.loc | |
| ### | |
| ### Example: | |
| ### TLD_SUFFIX=local | |
| ### Makes your project available under xxxx.local | |
| ### | |
| TLD_SUFFIX=loc | |
| ### | |
| ### Optional DNS configuration | |
| ### Allows you to add extra DNS records (above the wildcard entry) | |
| ### Useful if your host computer run other Docker services that you want to connect to or reach | |
| ### from within the Devilbox network by a custom hostname. | |
| ### | |
| ### Format: | |
| ### ------- | |
| ### Resolve any custom defined hostname to an IP address (useable inside container and host os) | |
| ### EXTRA_HOSTS=<hostname>=<ip>[,<hostname>=<ip>] | |
| ### | |
| ### Resolve any custom defined hostname to whatever IP address a CNAME resolves to | |
| ### (Useable inside the container and host OS). | |
| ### Note: CNAME must be resolvable by Google DNS | |
| ### EXTRA_HOSTS=<hostname>=<CNAME>[,<hostname>=<CNAME>] | |
| ### | |
| ### Examples: | |
| ### --------- | |
| ### EXTRA_HOSTS=hostname.loc=1.2.3.4 | |
| ### EXTRA_HOSTS=host.loc=1.2.3.4,host.example.org=3.4.5.6 | |
| EXTRA_HOSTS= | |
| ### | |
| ### Set your user id and group id | |
| ### | |
| ### This should be changed to the value of your local | |
| ### users uid and gid | |
| ### | |
| ### Type `id` on the terminal to find out your values | |
| ### | |
| NEW_UID=1000 | |
| NEW_GID=1000 | |
| ### | |
| ### Timezone for PHP Docker container (system and php.ini) | |
| ### | |
| TIMEZONE=UTC | |
| ################################################################################ | |
| ### | |
| ### INTRANET SETTINGS | |
| ### | |
| ################################################################################ | |
| ### | |
| ### TLD_SUFFIX domains are checked if they are set in the | |
| ### host computer /etc/hosts or available via attached DNS server. | |
| ### Timeout is done on vhosts.php (intranet) via ajax calls. | |
| ### In order to keep performance, set this to a low value. | |
| ### DNS checks might not succeed in time on slow machines. | |
| ### If DNS is valid, but timeout is expired, set this to a higher value. | |
| ### | |
| ### DNS_CHECK_TIMEOUT value is how many seconds to time out | |
| ### Default is to timeout after 1 second (DNS_CHECK_TIMEOUT=1) | |
| ### | |
| DNS_CHECK_TIMEOUT=1 | |
| ### | |
| ### Devilbox UI SSL Certificate generation | |
| ### | |
| ### When using SSL each certificate requires names for which it is responsible: | |
| ### Common Name as well as alternative names. | |
| ### | |
| ### Specify comma separated hostnames below by which you want to access the Devilbox. | |
| ### Those hostnames will be included in the SSL certificate for the Devilbox intranet. | |
| ### This has nothing to do for SSL certificates for projects, it is just for the intranet | |
| ### itself. | |
| ### | |
| DEVILBOX_UI_SSL_CN=localhost,*.localhost,devilbox,*.devilbox,httpd | |
| ### | |
| ### Devilbox UI Password protection enable/disable (1/0) | |
| ### | |
| ### Set DEVILBOX_UI_PROTECT to 1 in order to password protect the | |
| ### intranet. | |
| ### | |
| ### Example: | |
| ### DEVILBOX_UI_PROTECT=1 | |
| ### DEVILBOX_UI_PROTECT=0 | |
| ### | |
| DEVILBOX_UI_PROTECT=0 | |
| ### | |
| ### Devilbox UI Password | |
| ### | |
| ### When DEVILBOX_UI_PROTECT=1, use the following password | |
| ### to log in. The password can always be changed. | |
| ### When changing the password, make sure to restart your | |
| ### PHP container. | |
| ### | |
| ### Example: | |
| ### DEVILBOX_UI_PASSWORD=my-very-secure-password | |
| ### DEVILBOX_UI_PASSWORD=Some pass with spaces | |
| ### | |
| ### The default username is 'devilbox' | |
| ### | |
| DEVILBOX_UI_PASSWORD=password | |
| ### | |
| ### Enable the Devilbox Intranet? | |
| ### | |
| ### Example: | |
| ### DEVILBOX_UI_ENABLE=1 | |
| ### DEVILBOX_UI_ENABLE=0 | |
| ### | |
| DEVILBOX_UI_ENABLE=1 | |
| ### | |
| ### Automatically be logged in into phpMyAdmin | |
| ### | |
| ### Example: | |
| ### DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=1 | |
| ### DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=0 | |
| ### | |
| DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=1 | |
| ### | |
| ### Automatically be logged in into phpPgAdmin | |
| ### | |
| ### Example: | |
| ### DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=1 | |
| ### DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=0 | |
| ### | |
| DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=1 | |
| ################################################################################ | |
| ### | |
| ### 1. Choose Images (Version) | |
| ### | |
| ################################################################################ | |
| ### | |
| ### You can choose any combination of httpd, mysql, postgresql or php. | |
| ### Each of them are fully compatible between one another. | |
| ### | |
| ### | |
| ### 1.1 Choose PHP Server Image | |
| ### | |
| ### Note: PHP 5.2 is not officially supported. Intranet won't work (due to lack of namespace support). | |
| ### PHP 5.2 only works with Apache 2.4, Nginx stable and Nginx mainline. | |
| ### Use at your own risk. | |
| ### | |
| #PHP_SERVER=5.2 | |
| #PHP_SERVER=5.3 | |
| #PHP_SERVER=5.4 | |
| #PHP_SERVER=5.5 | |
| #PHP_SERVER=5.6 | |
| #PHP_SERVER=7.0 | |
| #PHP_SERVER=7.1 | |
| #PHP_SERVER=7.2 | |
| PHP_SERVER=7.3 | |
| #PHP_SERVER=7.4 | |
| #PHP_SERVER=8.0 | |
| ### | |
| ### 1.2 Choose HTTPD Server Image | |
| ### | |
| #HTTPD_SERVER=apache-2.2 | |
| #HTTPD_SERVER=apache-2.4 | |
| HTTPD_SERVER=nginx-stable | |
| #HTTPD_SERVER=nginx-mainline | |
| ### | |
| ### 1.3 Choose MySQL Server Image | |
| ### | |
| #MYSQL_SERVER=mysql-5.5 | |
| #MYSQL_SERVER=mysql-5.6 | |
| #MYSQL_SERVER=mysql-5.7 | |
| #MYSQL_SERVER=mysql-8.0 | |
| #MYSQL_SERVER=mariadb-5.5 | |
| #MYSQL_SERVER=mariadb-10.0 | |
| #MYSQL_SERVER=mariadb-10.1 | |
| #MYSQL_SERVER=mariadb-10.2 | |
| MYSQL_SERVER=mariadb-10.3 | |
| #MYSQL_SERVER=mariadb-10.4 | |
| #MYSQL_SERVER=percona-5.5 | |
| #MYSQL_SERVER=percona-5.6 | |
| #MYSQL_SERVER=percona-5.7 | |
| #MYSQL_SERVER=percona-8.0 | |
| ### | |
| ### 1.4 Choose PostgreSQL Server Image | |
| ### | |
| ### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX | |
| ### https://github.com/docker/toolbox/issues/510 | |
| ### | |
| #PGSQL_SERVER=9.0 | |
| #PGSQL_SERVER=9.1 | |
| #PGSQL_SERVER=9.2 | |
| #PGSQL_SERVER=9.2-alpine | |
| #PGSQL_SERVER=9.3 | |
| #PGSQL_SERVER=9.3-alpine | |
| #PGSQL_SERVER=9.4 | |
| #PGSQL_SERVER=9.4-alpine | |
| #PGSQL_SERVER=9.5 | |
| #PGSQL_SERVER=9.5-alpine | |
| #PGSQL_SERVER=9.6 | |
| #PGSQL_SERVER=9.6-alpine | |
| #PGSQL_SERVER=10.0 | |
| #PGSQL_SERVER=10.0-alpine | |
| #PGSQL_SERVER=10.1 | |
| #PGSQL_SERVER=10.1-alpine | |
| #PGSQL_SERVER=10.2 | |
| #PGSQL_SERVER=10.2-alpine | |
| #PGSQL_SERVER=10.3 | |
| #PGSQL_SERVER=10.3-alpine | |
| #PGSQL_SERVER=10.4 | |
| #PGSQL_SERVER=10.4-alpine | |
| #PGSQL_SERVER=10.5 | |
| #PGSQL_SERVER=10.5-alpine | |
| #PGSQL_SERVER=10.6 | |
| #PGSQL_SERVER=10.6-alpine | |
| #PGSQL_SERVER=10.7 | |
| #PGSQL_SERVER=10.7-alpine | |
| #PGSQL_SERVER=10.8 | |
| #PGSQL_SERVER=10.8-alpine | |
| #PGSQL_SERVER=10.9 | |
| #PGSQL_SERVER=10.9-alpine | |
| #PGSQL_SERVER=10.10 | |
| #PGSQL_SERVER=10.10-alpine | |
| #PGSQL_SERVER=10.11 | |
| #PGSQL_SERVER=10.11-alpine | |
| #PGSQL_SERVER=11.0 | |
| #PGSQL_SERVER=11.0-alpine | |
| #PGSQL_SERVER=11.2 | |
| #PGSQL_SERVER=11.2-alpine | |
| #PGSQL_SERVER=11.3 | |
| #PGSQL_SERVER=11.3-alpine | |
| #PGSQL_SERVER=11.4 | |
| #PGSQL_SERVER=11.4-alpine | |
| #PGSQL_SERVER=11.5 | |
| #PGSQL_SERVER=11.5-alpine | |
| #PGSQL_SERVER=11.6 | |
| #PGSQL_SERVER=11.6-alpine | |
| #PGSQL_SERVER=12.0 | |
| #PGSQL_SERVER=12.0-alpine | |
| PGSQL_SERVER=12.1 | |
| #PGSQL_SERVER=12.1-alpine | |
| #PGSQL_SERVER=latest | |
| #PGSQL_SERVER=alpine | |
| ### | |
| ### 1.5 Choose Redis Server Image | |
| ### | |
| ### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX | |
| ### https://github.com/docker/toolbox/issues/510 | |
| ### | |
| #REDIS_SERVER=2.8 | |
| #REDIS_SERVER=3.0 | |
| #REDIS_SERVER=3.0-alpine | |
| #REDIS_SERVER=3.2 | |
| #REDIS_SERVER=3.2-alpine | |
| #REDIS_SERVER=4.0 | |
| #REDIS_SERVER=4.0-alpine | |
| REDIS_SERVER=5.0 | |
| #REDIS_SERVER=5.0-alpine | |
| #REDIS_SERVER=latest | |
| #REDIS_SERVER=alpine | |
| ### | |
| ### 1.6 Choose Memcached Server Image | |
| ### | |
| ### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX | |
| ### https://github.com/docker/toolbox/issues/510 | |
| ### | |
| #MEMCD_SERVER=1.4 | |
| #MEMCD_SERVER=1.4-alpine | |
| MEMCD_SERVER=1.5 | |
| #MEMCD_SERVER=1.5-alpine | |
| #MEMCD_SERVER=latest | |
| #MEMCD_SERVER=alpine | |
| ### | |
| ### 1.7 Choose Mongo Server Image | |
| ### | |
| #MONGO_SERVER=2.8 | |
| #MONGO_SERVER=3.0 | |
| #MONGO_SERVER=3.2 | |
| #MONGO_SERVER=3.4 | |
| #MONGO_SERVER=3.6 | |
| #MONGO_SERVER=4.0 | |
| MONGO_SERVER=4.2 | |
| #MONGO_SERVER=latest | |
| ################################################################################ | |
| ### | |
| ### 2. Host Mounts (Your computer) | |
| ### | |
| ################################################################################ | |
| ### | |
| ### Global mount options | |
| ### | |
| ### Note: When adding custom mount options, ensure to start with a | |
| ### leading ',' (comma), as those options are prepended to already | |
| ### existing mount options. | |
| ### | |
| ### Note: If no mount options are specified, leave this variable empty | |
| ### and do not add a leading ',' (comma). | |
| ### | |
| ### MOUNT_OPTIONS=,cached | |
| ### MOUNT_OPTIONS= | |
| ### | |
| ### Example: Allow to share mounts accross container with SELINUX enabled | |
| ### | |
| ### MOUNT_OPTIONS=,z | |
| ### | |
| MOUNT_OPTIONS= | |
| ### | |
| ### Local filesystem path to www projects. | |
| ### | |
| ### Note: When changing this variable you must re-create the container. | |
| ### Simply remove it, it will be auto-created during the next start: | |
| ### | |
| ### $ docker-compose rm -f | |
| ### | |
| HOST_PATH_HTTPD_DATADIR=./data/www | |
| ### | |
| ### The path on your host OS of the ssh directory to be mounted into the | |
| ### PHP container into /home/devilbox/.ssh. | |
| ### | |
| ### IMPORTANT: The path is mounted read-only to ensure you cannot accidentally | |
| ## delete anything inside the php container. | |
| ### | |
| HOST_PATH_SSH_DIR=~/.ssh | |
| ################################################################################ | |
| ### | |
| ### 3. PHP Docker Settings | |
| ### | |
| ################################################################################ | |
| ### | |
| ### Enable certain PHP modules which are not enabled by default | |
| ### | |
| ### Currently the only modules that can be enabled are 'ioncube' and 'blackfire' | |
| ### Also ensure to disable xdebug when using any of the above: | |
| ### https://xdebug.org/docs/install#compat | |
| ### | |
| ### PHP_MODULES_ENABLE=ioncube, blackfire | |
| ### | |
| PHP_MODULES_ENABLE= | |
| ### | |
| ### Disable any PHP modules that you don't require | |
| ### | |
| ### Specify a comma separated list without spaces of modules to disable | |
| ### | |
| ### PHP_MODULES_DISABLE=xdebug,imagick,swoole | |
| ### | |
| PHP_MODULES_DISABLE=oci8,PDO_OCI,pdo_sqlsrv,sqlsrv,rdkafka,swoole | |
| ### | |
| ### Postfix settings for email catch-all | |
| ### | |
| ### When set to '1' postfix is normally started and made available. However you still need | |
| ### to configure it to your needs yourself. For that you can use the autostart scripts | |
| ### and define a couple of 'postconf -e name=value' commands. | |
| ### | |
| ### When set to '2' (email catch-all), no mail will leave the Devilbox. It is automatically | |
| ### internally routed the the devilbox mail account and you can see each sent mail | |
| ### in the bundled intranet: https://localhost/mail.php | |
| ### | |
| ### Values: | |
| ### 0: Disable postfix (do not start it) | |
| ### 1: Enable/Start postfix | |
| ### 2: Enable/Start postfix and enable email catch-all | |
| ### | |
| PHP_MAIL_CATCH_ALL=2 | |
| ### | |
| ### Configure everything else about PHP in | |
| ### * cfg/php-ini-X.X/*.ini | |
| ### * cfg/php-fpm-X.X/*.conf | |
| ################################################################################ | |
| ### | |
| ### 4. HTTPD Docker Settings | |
| ### | |
| ################################################################################ | |
| ### | |
| ### Expose HTTPD Port to Host | |
| ### | |
| HOST_PORT_HTTPD=80 | |
| HOST_PORT_HTTPD_SSL=443 | |
| ### | |
| ### SSL (HTTP/HTTPS) settings for automated vhost generation | |
| ### | |
| ### By default each project will have two vhosts (one for HTTP and one for HTTPS). | |
| ### You can control the SSL settings for your projects via the below stated values. | |
| ### | |
| ### This is internally achieved via the '-m' argument of https://github.com/devilbox/vhost-gen | |
| ### | |
| ### Values: | |
| ### * both: Serve HTTP and HTTPS for all projects | |
| ### * redir: HTTP always redirects to HTTPS | |
| ### * ssl: Only serve HTTPS | |
| ### * plain: Only serve HTTP | |
| ### | |
| HTTPD_VHOST_SSL_TYPE=both | |
| ### | |
| ### Document Root Subdirectory | |
| ### | |
| ### In your project directory, which subfolder should | |
| ### serve your files? | |
| ### | |
| ### When changing this value, restart the devilbox. | |
| ### | |
| HTTPD_DOCROOT_DIR=htdocs | |
| ### | |
| ### Per vHost Config Subdirectory | |
| ### | |
| ### In your project directory, which subfolder should | |
| ### hold apache, nginx templates for a customized vhost? | |
| ### | |
| ### When changing this value, restart the devilbox. | |
| ### | |
| HTTPD_TEMPLATE_DIR=.devilbox | |
| ### | |
| ### Webserver timeout (in seconds) to upstream PHP-FPM server | |
| ### | |
| ### This value should be greater than PHP's max_execution_time, | |
| ### otherwise the php script could still run and the webserver will | |
| ### simply drop the connection before getting an answer by PHP. | |
| ### | |
| HTTPD_TIMEOUT_TO_PHP_FPM=180 | |
| ### | |
| ### NGINX ONLY | |
| ### | |
| ### Set worker_processes and worker_connections | |
| ### | |
| ### https://nginx.org/en/docs/ngx_core_module.html#worker_processes | |
| ### https://nginx.org/en/docs/ngx_core_module.html#worker_connections | |
| ### | |
| HTTPD_NGINX_WORKER_PROCESSES=auto | |
| HTTPD_NGINX_WORKER_CONNECTIONS=1024 | |
| ################################################################################ | |
| ### | |
| ### 5. MySQL Docker Settings | |
| ### | |
| ################################################################################ | |
| ### | |
| ### MySQL root user password | |
| ### | |
| ### The password is required for the initial creation of the MySQL database | |
| ### as well as the Devilbox intranet to display schema and configuration settings. | |
| ### | |
| ### If you change your MySQL root user password via mysql cli, phpMyAdmin or other tools | |
| ### after the database has been created, ensure to adjust the value here accordingly as well. | |
| ### | |
| ### If you only change this value here after the database has been created, | |
| ### the MySQL root user password will not actually be changed and the Devilbox intranet | |
| ### won't be able to connect to the MySQL service. | |
| ### | |
| MYSQL_ROOT_PASSWORD= | |
| ### | |
| ### Expose MySQL Port to Host | |
| ### | |
| HOST_PORT_MYSQL=3306 | |
| ################################################################################ | |
| ### | |
| ### 6. PostgreSQL Docker Settings | |
| ### | |
| ################################################################################ | |
| ### | |
| ### PostgreSQL 'root' user name (usually postgres) | |
| ### | |
| PGSQL_ROOT_USER=postgres | |
| ### | |
| ### PostgreSQL 'root' user password | |
| ### | |
| PGSQL_ROOT_PASSWORD= | |
| ### | |
| ### Expose PostgreSQL Port to Host | |
| ### | |
| HOST_PORT_PGSQL=5432 | |
| ################################################################################ | |
| ### | |
| ### 7. Redis Docker Settings | |
| ### | |
| ################################################################################ | |
| ### | |
| ### Expose Redis Port to Host | |
| ### | |
| HOST_PORT_REDIS=6379 | |
| ### | |
| ### Custom startup arguments | |
| ### | |
| ### Apply custom startup arguments to redis | |
| ### | |
| ### Example: Password protection | |
| ### Add password protection to the Redis server by specifying it should | |
| ### require a password. | |
| ### Note: Do not add quotes or spaces to the password | |
| ### | |
| ### REDIS_ARGS=--requirepass my-redis-root-password | |
| ### | |
| ### Example: Verbosity | |
| ### | |
| ### REDIS_ARGS=--loglevel verbose | |
| ### | |
| REDIS_ARGS= | |
| #REDIS_ARGS=--loglevel verbose --requirepass my-redis-root-password | |
| ################################################################################ | |
| ### | |
| ### 8. Memcached Docker Settings | |
| ### | |
| ################################################################################ | |
| ### | |
| ### Expose Memcached Port to Host | |
| ### | |
| HOST_PORT_MEMCD=11211 | |
| ################################################################################ | |
| ### | |
| ### 9. MongoDB Docker Settings | |
| ### | |
| ################################################################################ | |
| ### | |
| ### Expose MongoDB Port to Host | |
| ### | |
| HOST_PORT_MONGO=27017 | |
| ################################################################################ | |
| ### | |
| ### 10. Bind Docker Settings | |
| ### | |
| ################################################################################ | |
| ### | |
| ### Expose Bind Port to Host | |
| ### | |
| HOST_PORT_BIND=1053 | |
| ### | |
| ### Add comma separated DNS server from which you want to receive DNS | |
| ### You can also add DNS servers from your LAN (if any are available) | |
| ### | |
| BIND_DNS_RESOLVER=8.8.8.8,8.8.4.4 | |
| ### | |
| ### Validate DNSSEC | |
| ### | |
| ### Values: | |
| ### no: DNSSEC validation is disabled | |
| ### yes: DNSSEC validation is enabled, but a trust anchor must be manually configured. | |
| ### auto: DNSSEC validation is enabled, and a default trust anchor for root zone is used. | |
| ### | |
| BIND_DNSSEC_VALIDATE=no | |
| ### | |
| ### Bind timing options (time in seconds) | |
| ### | |
| ### Leave empty for defaults. | |
| ### Only change when you know what you are doing. | |
| ### | |
| BIND_TTL_TIME= | |
| BIND_REFRESH_TIME= | |
| BIND_RETRY_TIME= | |
| BIND_EXPIRY_TIME= | |
| BIND_MAX_CACHE_TIME= | |
| ### | |
| ### Show DNS Queries in Docker logs output? | |
| ### | |
| ### 1: Yes | |
| ### 0: No | |
| BIND_LOG_DNS_QUERIES=0 | |
| ################################################################################ | |
| ### | |
| ### 11. Custom variables | |
| ### | |
| ################################################################################ | |
| ### | |
| ### Any variable defined in this file will be available | |
| ### as environment variables to your PHP/HHV Docker container. | |
| ### | |
| ### This might be useful to set application environment and retrieve | |
| ### them via: <?php getenv('MY_APPLICATION_ENV'); ?> | |
| ### | |
| ### | |
| ### Example: | |
| ### <?php echo getenv('Foo'); ?> would produce: 'some value' | |
| ### | |
| #Foo=some value |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment