Skip to content

Instantly share code, notes, and snippets.

@MikeOrtiz
Created November 13, 2015 19:39
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save MikeOrtiz/92fc07d4761ce6e0b4d3 to your computer and use it in GitHub Desktop.
Save MikeOrtiz/92fc07d4761ce6e0b4d3 to your computer and use it in GitHub Desktop.
Device failed to enumerate with Nexus 5.
[ 780.714718] usb 1-1: USB disconnect, device number 2
[ 783.100845] msm-dwc3 msm_dwc3: DWC3 in low power mode
[ 786.089376] msm-dwc3 msm_dwc3: DWC3 exited from low power mode
[ 786.333267] usb 1-1: new full-speed USB device number 3 using xhci-hcd
[ 786.354557] usb 1-1: device descriptor read/8, error -75
[ 786.484641] usb 1-1: device descriptor read/8, error -75
[ 786.713275] usb 1-1: new full-speed USB device number 4 using xhci-hcd
[ 786.736518] usb 1-1: device descriptor read/8, error -75
[ 786.865453] usb 1-1: device descriptor read/8, error -75
[ 787.093329] usb 1-1: new full-speed USB device number 5 using xhci-hcd
[ 787.114846] usb 1-1: device descriptor read/8, error -75
[ 787.245287] usb 1-1: device descriptor read/8, error -75
[ 787.472987] usb 1-1: new full-speed USB device number 6 using xhci-hcd
[ 787.494661] usb 1-1: device descriptor read/8, error -75
[ 787.625136] usb 1-1: device descriptor read/8, error -75
[ 787.733048] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 790.096296] msm-dwc3 msm_dwc3: DWC3 in low power mode
[ 791.884345] anx7808 anx7808_cbl_det_isr: detect cable removal
[ 791.888828] msm-dwc3 msm_dwc3: DWC3 exited from low power mode
[ 792.218515] xhci-hcd xhci-hcd: remove, state 4
[ 792.218638] usb usb2: USB disconnect, device number 1
[ 792.219219] xHCI xhci_drop_endpoint called for root hub
[ 792.219227] xHCI xhci_check_bandwidth called for root hub
[ 792.220296] xhci-hcd xhci-hcd: USB bus 2 deregistered
[ 792.220369] xhci-hcd xhci-hcd: remove, state 1
[ 792.220487] usb usb1: USB disconnect, device number 1
[ 792.221580] xHCI xhci_drop_endpoint called for root hub
[ 792.221588] xHCI xhci_check_bandwidth called for root hub
[ 792.223700] xhci-hcd xhci-hcd: USB bus 1 deregistered
[ 792.224802] bq24192_external_power_changed: usb host mode = 2
[ 792.225282] bq24192_enable_otg: otg enable = 0
[ 792.245529] healthd: battery l=87 v=4113 t=28.0 h=2 st=3 c=225 chg=
[ 792.262822] healthd: battery l=87 v=4113 t=28.0 h=2 st=3 c=236 chg=
[ 792.492063] msm-dwc3 msm_dwc3: DWC3 in low power mode
[ 794.855970] bq24192_irq_worker: power source changed! ext_pwr = 1 wlc_pwr = 0
[ 794.882528] bq24192_irq_worker: notify vbus to usb otg ext_pwr = 1
[ 794.884217] bq24192_external_power_changed: usb host mode = 2
[ 794.892332] max17048_external_power_changed: power supply changed state = 1 health = 1
[ 794.929257] healthd: battery l=87 v=4128 t=27.8 h=2 st=2 c=-334 chg=
[ 794.991579] healthd: battery l=87 v=4185 t=27.8 h=2 st=2 c=-319 chg=
[ 795.031163] healthd: battery l=87 v=4185 t=27.9 h=2 st=2 c=-262 chg=
[ 795.087866] msm-dwc3 msm_dwc3: DWC3 exited from low power mode
[ 795.232691] dwc3 f9200000.dwc3: Avail curr from USB = 500
[ 795.232833] dotg->charger->max_power = 0 ma = 500
[ 795.234569] [Touch] CHARGER = 1
[ 795.236246] bq24192_set_input_i_limit: input current limit = 500 setting 0x02
[ 795.237969] bq24192_set_ibat_max: req_ibat = 1500 set_ibat = 1472 reg_val = 0x3c
[ 795.239016] bq24192_external_power_changed: usb is online! i_limit = 500 v_limit = 4600
[ 795.239701] bq24192_external_power_changed: usb host mode = 2
[ 795.242689] android_work: did not send uevent (0 0 (null))
[ 795.260053] healthd: battery l=87 v=4181 t=27.8 h=2 st=2 c=-311 chg=u
[ 795.309386] healthd: battery l=87 v=4181 t=27.8 h=2 st=2 c=-171 chg=u
[ 795.336429] healthd: battery l=87 v=4181 t=27.8 h=2 st=2 c=7 chg=u
[ 795.393002] android_work: did not send uevent (0 0 (null))
[ 795.506229] android_work: sent uevent USB_STATE=CONNECTED
[ 795.563228] android_usb gadget: high-speed config #1: fe8050c8.android_usb
[ 795.622232] android_work: sent uevent USB_STATE=CONFIGURED
[ 795.631974] mtp_open
[ 796.882198] bq24192_set_input_i_limit: input current limit = 500 setting 0x02
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment